The voip stinks, tried mnany of them, nothin beats made in USA just an
overworked opinion. Great as a repeater only, watch out for overheating. When
you stick 10 pounds of crap in a five pound cabinet, trouble
--- On Wed, 6/9/10, Gareth Bennett gare...@es.co.nz wrote:
From: Gareth Bennett
That's great new I'm wondering if the xpr6550 IDs can read a hytera radio
73's de K2QQJ
On Jun 10, 2010, at 12:24 AM, k7...@skybeam.com wrote:
HI Gareth,
Just to mention that both the portable and mobile work on the IPSC system just
fine and have not noticed any issues. The only feature that
Want jack on the back then use radius or maxtrac 16 pin. Want a real system,
use Kenwood (-:
--- On Wed, 6/9/10, wa4moe wa4...@carolina.rr.com wrote:
From: wa4moe wa4...@carolina.rr.com
Subject: [Repeater-Builder] Repeater radio needed-rig advice.
To: Repeater-Builder@yahoogroups.com
Date:
Instead of MOVs, how about a gas discharge tube [GDT]. OR Possibly in parallel
with the MOV. They are small and metal and the specs say they can take quite a
few discharges and not break down..
Anyone use those?
Thank you for all the replies and info on my subject!..
73
--- In
This DDRR antenna is also new to me but space-wise it is even smaller than the
squalo so definitely worth considering, especially because I wouldn't want to
try the squalo if the majority says it won't perform as expected.
Would you use just one of them even though it's on the side of the
Kevin,
I agree that its hard to bet Motorola but since the firmware is not even
released yet for the repeater how can you say the Voip stinks. Also you say
when you stick 10 pounds of crap in a 5 pound cabinet your going to have
trouble. Crap, if you were to see what is inside the repeater I
Yes, the only thing both radios will not do is text between both models.
Motorola is not doing there text features to the DMR standard and Hytera is.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, Co 80504
303-736-9693
_
From: Repeater-Builder@yahoogroups.com
At 09:16 PM 6/9/2010, you wrote:
Ask QRZ... they are very responsive to email questions...
They *said* some time ago that it was done to stop people from
stripping email addresses and spamming.
Larry Wagoner - N5WLW
PRCARC Training Officer
PIC - MS SECT ARRL
Hi Mike, That's what I've heard as well.
What I have briefly learnt about the RD982 platform is that it has been
carefully designed after learning from other vendors mistakes and LEARNING from
them. The quality is such that one could re-badge the radio as a new generation
Motorola and get
I've had good luck with the GE Phoenix-S radios. Everything's available
on the back, including pins for toggling through the channels, and
resetting to ch 1 for starter-up/reference.
On 6/9/2010 11:31 PM, wa4moe wrote:
I'm searching for a transceiver to put into service for a link on
Looks very interesting and I wouldn't put it past the Chinese to copy there
repeater. It looks like a good one to copy at that. I did get your other
message earlier.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, Co 80504
303-736-9693
_
From:
I prefer the ground plane for my 6 meter repeater. Look at these two links:
http://www.repeater-builder.com/db/pdfs/db-201.pdf
and
http://www.repeater-builder.com/db/pdfs/db-201.pdf
They are rather simple antennas, very durable and last a long time. I
have one at 30+ feet now for several years
It would be if you wanted a horizontally polarized repeater system. The
Squalo is an SSB/CW antenna made for horizontal polarization.
Joe
On 6/9/2010 9:33 AM, Lee Pennington wrote:
I agree with Joe, but I believe if mounted as designed, the
performance, while not earth shaking, will be
Henry,
I have an RP-3010 that someone reprogrammed the callsign for me. That
was back in 1999, he may still be around and willing to program your
EPROM possibly for a small fee. Email me direct and I'll see if he is
interested, if his email address is still good.
The original ICOM
I posted an ad on a couple of the commonly know swap sites, but this may be the
best bet. I am looking for an amplifier for a 220 repeater. The Mirage rack
mount unit comes to mind but there are no doubt some alternatives out there.
Anyone have something for sale? Thanks…. – Mike, K4CVL
The quality is such that one could re-badge the radio as a new generation
Motorola and get away with it. I know for a fact that Motorola are very
concerned about HYT.
That IS because HYT makes a lot of the low end radios for Motorola
A Gas Tube Arrestor is better suited to telephone lines and RF coaxial
cables than to 120 VAC AC power lines. If used on AC power lines, when
fired, they will produce a bolted short and cause a great deal of current
to flow. This is not a good thing!
Some computer accessory suppliers vigorously
Boy wouldn't you think that these devices would loose their UL rating?
Chuck
WB2EDV
- Original Message -
From: Eric Lemmon wb6...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, June 10, 2010 8:03 PM
Subject: RE: [Repeater-Builder] Re: MOVs for power supply primary
If you're ever in a facility served with a nice on-line UPS, a smart
site manager will tell you that you can't have surge protecting power
strips because the clamping behavior is really bad for the UPS inverter
outputs and does more to damage other people's power (and the UPS) than
it does to
I don't know if this would be off topic or not. I need to find out if there is
a group on the CDM1250 or find someone here who is very knowledgeable on this
radio. I just started doing some radio work for a fire department that has
several of these and they are remote mounted with two control
I just tried to email the gentleman, but the address turned up to be
bad. All I remember is that his name was Pete.
(Pete, are you on this list?)
I'll try to find the envelope that he sent me the EPROM in, if I still
have it.
73, Joe, K1ike
On 6/10/2010 11:27 AM,
Good place for anything Motorola is www.batlabs.com I am sure someone on
there can answer your questions
Chet/K6CRB
On Thu, Jun 10, 2010 at 5:52 PM, terry dalpoas km...@yahoo.com wrote:
I don't know if this would be off topic or not. I need to find out if
there is a group on the CDM1250
The M9887 is a tripler transistor in the UHF Mitreks and MSR2000, I need one
and wonder if anyone has one (new or used) - I just don't want to buy a Mitrek
becasue of the shipping, but the MSR exciter is small enough I would purchase
the entire module if someone has one, please let me know
Re: Icom Repeater Eprom Reprogramming
It was probably me... but I didn't and don't charge for doing
them/it.
I can do it, but right now you have to be very patient with
me as I'm up to my backside in alligators and I don't even
have a swamp nearby. Meaning I'm working long hours on a
major
cruizzer77 atlant...@... wrote:
This DDRR antenna is also new to me but space-wise it is
even smaller than the Squalo so definitely worth considering,
Keep in mind the DDRR Antenna is a reduced size vertical polarized
antenna and the Squalo Ho-Loop are normally considered full or
That transistor alone is gonna cost about $40.00 If someone has a rig for
cheap, way to go in my opinoin. If I had one I would send, unfortunately gonna
pay mot $
--- On Thu, 6/10/10, rfburnz rfpo...@covad.net wrote:
From: rfburnz rfpo...@covad.net
Subject: [Repeater-Builder] WTB
I'm sending him one... it's taken care of...
thanks
s.
kevin valentino kevinvalent...@... wrote:
That transistor alone is gonna cost about $40.00 If someone has a rig for
cheap, way to go in my opinoin. If I had one I would send, unfortunately
gonna pay mot $
--- On Thu,
27 matches
Mail list logo
