with respect to your load.
I have heard stories where folks have brought their valued home station to a
field day site only to take the power supply home damaged.
I hope this is helpful.
73
Bruce, W3YVV
this spring.
73, Bruce
- Original Message -
From: Joe k1ike_m...@snet.net
To: Repeater-Builder@yahoogroups.com
Sent: Monday, April 26, 2010 8:16 PM
Subject: Re: [Repeater-Builder] Interference from local 600 kHz radio
station.
There was a 6 meter repeater here in Connecticut
Hello all,
I'm in need of a used RICK. Any one in the group have a clue where I may get
one? Or any help how to make two Motorola radios 1: GM300 and a 2: SM120 work
as a repeater?
Thank you
Bruce
more room for what I
am working on.
Bruce WA6YLV...
(HAM
Call SignCLEAR!)
CB Channel 19 was DEAD Quiet for over 5 minutes!! That was one you
just had to be there to get it the way I mean it! Have you EVER heard CB 19
quiet for 5+ Minutes?
Bruce in Texas
KE5TPN
From Bruce in Texas, KE5TPN
Never knew this person but 73 and 88 to all who were close to him.
NEVER DISRESCECT THE SILENT KEY!
RPI my friend, RPI. May the Skip be with you always!
Bruce Bagwell in Texas
KE5TPN
Hey Skipp,
I always value your advise but had to call you on this one.
It is the Four-Part Trilogy (Yes, it is A COMEDY for sure!)
Called, The Hitchhikers Guide to the GALAXY
BTW, Don't forget your TOWEL!
73
Bruce
KE5TPN
went down the tower or Guy wires, but enough went
through the not turned-on Astron. No doubt A mess but at least the Power
X-Former was still OK.
Speaking of Lightning, some head into this area right now. Gotta go!
All comments here were meant as SARCASM!
Bruce Bagwell
KE5TPN
The United
Bruce Bagwell
KE5TPN
If You Can Read This,
Thank A Teacher.
If You Are Reading This in ENGLISH,
Thank A Veteran or Current Soldier!
Support Our Troops!
For Without Them,
We Have No Support at All!
To all list members -
Please keep a close eye out for the following items which were stolen
from
I had no problem with the attachment.
You do need Adobe Acrobat Reader to open this. If you do not have Adobe
Reader, download it and I bet the attachment will open.
I don't have the address handy but do A search for Adobe Acrobat Reader
Download. I will bet you will be OK then.
Bruce
one group will
pick the flag up and run with it!
Bruce Bagwell
KE5TPN
If You Can Read This,
Thank A Teacher.
If You Are Reading This in ENGLISH,
Thank A Veteran or Current Soldier!
Support Our Troops!
For Without Them,
We Have No Support at All!
Hello I hope Everyone is doing Well , Some
people at our club who will just
about bend over backward to help or teach you. Give you extra unneeded
equipment, teach how to make A simple first wire antenna, etc.
No Class Warfare Here!
Bruce Bagwell
KE5TPN
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
. Still lots of on-the-job friction
required for good TV but A lot less Fluff and Junk!
Bruce
KE5TPN
- Original Message -
From: Paul Plack
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 22, 2008 12:32 PM
Subject: Re: [Repeater-Builder] So I watched it NBC Dateline story on Tower
THANK YOU SCOTT!
Well said!
Myself, I don't even understand what others are having a problem with.
What was that lineCan't we all just get along?
Thanks again. Good Job!
Bruce
KE5TPN
No, I don't feel as though vacations are in order in this situation. The
recent comments being posted
) As for the Breaker Box, I
would assume each also has its own breaker. Trying to stuff more than one wire
into A breaker would more fun than I care to have.
Bruce
KE5TPN
Dave,
This is a code requirement here in my county and think all of Florida.
The code requirements for building is a county
tickled
Glad I knew what was going on or else I might have made full contact, and I
would not be typing this right now!
Swapped the HOT/Neutral/Ground and all was OK!
Always remember, just because the outlet is Grounded does not mean it is
really Grounded Verify!
Stay safe out there!
Bruce
it along.
BroadBand Via PowerLine is BAD for us unless THEY can PROVE that it will NEVER
INTERFERE with our COMM's!
Bruce Bagwell
KE5TPN
.
,etc.
Same offer.
Also, MANY SAMS PhotoFacts for CB radio and Scanners from the 1970-1980 era
+/-3 years?
I can probably scan small sections if needed.
Pics, etc are available, Prices neg.
Contact me OFF LIST.
KE5TPN AT swbell DOT net
Thanks for the previous help!
Bruce Bagwell
. This will be used beside my house and not at some far
away repeater. Limited life is OK so long as I am aware of limitations.
Bruce
KE5TPN
This painting of antennas seems to be on many of our minds.
Wonder what the antenna
breaker and that should help the life of everything
without the Hard Turn-On Surge\
Now I have the 12VDC power to run almost any mobile radio as A Base rig.
Thanks again to all those who helped!
Bruce Bagwell
KE5TPN
-Original Message-
From: Bruce Bagwell [EMAIL PROTECTED]
Sent: Apr 8, 2008 1
. (Freq.
Coordination, not required but HIGHLY recommended!) BTW, many Repeaters in my
area, with the ID say The Time is or Good Afternoon/Morning, the time
is, Does the FCC consider Broadcasting? I guess not.
Bruce
KE5TPN
From: Paul M Schmitter
That last paragraph is badly worded
!
The Repeater Builder Site is A wealth of info for sure!!
Bruce Bagwell
KE5TPN
I wrote:
I already know this is UHF mobile unit. I have the connector and cable
(s). What I need to know since I am new to all this RF stuff and think
this would make a good project is, is this all here?
Unit
.
I want to use it as A 2 Meter HAM Linear.
I was thinking that will not work since the output freq is set regardless
of the input freq.
Thanks again,
Bruce
(Give me a few weeks on the CallSign!)
(Tech Test 2-30-08. Should pass easily)
(The ARRL study book covers everything I need!)
many
the screwhead WELDED to case!
The control board, filter caps, rectifier diodes, driver trans, power
transformer and all else appear to be OK.
Thanks again for the help All!
Bruce (PooterWizz)
(CallSign coming soon)
(Tech Test 3-20-08)
I had this same issue about a year ago. Their replacement
insulator supports will provide enough mechanical stability.
Bruce, WB6ARE
On Mar 16, 2006, at 7:31 AM, Al Wolfe wrote:
Most of the discussion I've seen for the 6 meter Heliax
duplexer has
been centered around using 1 5/8 Heliax. Has anyone used 3 1/8
stuff?
Would there be any advantage
://www.spacedata.net/
Bruce WB6ARE
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
://www.spacedata.net/
Bruce WB6ARE
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Very interested. How much? With the proper code will it set the PL
tone on and announce PL tone xxx on
Beginner here, bear with me. Thanks...
Bruce
Bruce Van Houten B.S., RT (R)KB1IIX
[EMAIL PROTECTED]
On Jan 29, 2006, at 10:43 AM, Shawn Mielke wrote:
I had bought this to use
Makesure the tx/rx antenna switch is working properly and check the
power set board in it. It can shut down the P.A. deck if not working properly.
Bruce, KD4BOH.
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday
antennas and 500 ft 1/2 hardline for 5 remote receive
sites that was put on water towers.
Only catch, If I take my system down I have to leave the antennas and
hardline. Otherwise I have total control.
The repeater system does belong to me. But just thought this might give you
an idea. Bruce KD4BOH
Ok, There putting strips on the bottom of Target and Wal-Mart shopping carts
to keep static down when a customer grabs the handle. So why wouldn't this
work well on a vehicle? Thanks, Bruce KD4BOH.
- Original Message -
From: Kevin Custer [EMAIL PROTECTED]
To: Repeater-Builder
Doug,Thanks for the DB224E data, your document is outstanding and I appreciate your time spent getting the details in a PDF.Bruce WB6AREOn Dec 12, 2005, at 9:05 PM, Doug Zastrow wrote:To All I Promised this Info, My DB224-E sketch will be on its way to your inbox tonight. If you don't have it
that was converted to a
repeater twenty years ago was happy running 35 watts with fans until
a recent lightning hit. It's repairable but I decided it had a good
life replaced it with something more modern. So once again I'm
running hardware that some else though was junk.
Bruce WB6ARE
On Aug
we're along the same thinking on this.
So we take the preselecters off the Micors, put on the RS 4-way splitter,
gain set to over come loss. What about jumpers, 75 or 50 ohm ? Does it
really matter, and do they need to be 1/4 wave length of the freq. they are
hooked to ? Thanks, Bruce KD4BOH
mini circuit company, I'll have to check them out. Alot
of people on here refer to them.
Thanks, Bruce KD4BOH.
- Original Message -
From: Al Wolfe [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, August 04, 2005 9:23 AM
Subject: [Repeater-Builder] Re: receiver
is @
40 watts. If I need to put Bp on other receivers I have them. They are
synclairs. All radios are Micors. Thanks Bruce.
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, August 02, 2005 4:37 PM
Subject: [Repeater-Builder] Re: Rx
which improved weak signal noise detector
falsing at the master comparator.
Thanks,
Bruce
WA6YLV
KMJ335
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email
Kevin,
Did you try the SpectrTAC Yahoo List? You might get a better response
there. I personally know at least one fellow locally who has done
what you describe and he monitors that list now and then.
Bruce
WA6YLV
KMJ335
--- In Repeater-Builder@yahoogroups.com, Kevin Berlen, K9HX
Does anybody have a web site to look at IOTA power supply? I need to find
some to replace my power supplies in the future. Bruce KD4BOH.-
Original Message -
From: Joe Montierth [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, May 25, 2005 2:22 PM
Subject: Re
the fins.
Hope this helps. Bruce KD4BOH.
- Original Message -
From: Ken [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 12, 2005 9:17 AM
Subject: [Repeater-Builder] GM300 power adjustment limit?
I have a 40 watt UHF GM300 I would like to tune down to 10 watts
Thanks for the Info, sounds like I need to upgrade. Bruce KD4BOH
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, July 04, 2005 1:50 PM
Subject: Re: [Repeater-Builder] C3I audio
delay board
Hi Bruce,
I
too cool. Hope this helps. Bruce.
KD4BOH.
- Original Message -
From: Mark A. Holman [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, June 19, 2005 8:03 PM
Subject: Re: [Repeater-Builder] Water Tower Humidity
I was thinking on the order which is solar powered charger
not advertising, just proven
experience of over 25 years. Thanks, Bruce KD4BOH.
- Original Message -
From: Chuck Kelsey [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 11, 2005 5:33 AM
Subject: Re: [Repeater-Builder] New antenna install ? Any tips ??
Glad you
Can the notches be made for 440 with 7/8 heliax? I need to notch out
442.675 from getting into 449.975 and 449.950. Can notches be made to do
this? Thanks, Bruce KD4BOH
- Original Message -
From: Matt Beasant [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, June 12
, but there is not enough room for a larger cap. Thanks Bruce KD4BOH.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 30, 2005 7:16 PM
Subject: Re: [Repeater-Builder] Time-Out-Timer Length
Bruce,
What model radio is the TLN1361A used
drive to it if locks up. Thanks
Again, Bruce KD4BOH.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 30, 2005 7:16 PM
Subject: Re: [Repeater-Builder] Time-Out-Timer Length
Bruce,
What model radio is the TLN1361A used
I had an arx270 to slowly burn the cap out @ the feed point of the antenna.
They will not handle 100 watts @ feed point on continuous duty. I contacted
Cushcraft and they sent me a new cap at no charge. I use it home now, no
repeater use. Bruce, KD4BOH.
- Original Message -
From: Eric
on this machine.
Wide area crossband 8 rx site system.
Thanks again guys, Bruce KD4BOH.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 10, 2005 8:26 PM
Subject: Re: [Repeater-Builder] Micor mobile transmitter
Bruce,
Although
Don't know about txrx. but tell me where you found Sinclair, also I have
tuned Wacomms the txrx should not be much different. Bruce. KD4BOH.
- Original Message -
From: John Place [EMAIL PROTECTED]
To: Repeater-Builder Repeater-Builder@yahoogroups.com
Sent: Saturday, May 07, 2005 10:54 AM
happens once in a while.
Just wanting to cover my bases!
I appreciate any advice.
Bruce
- Original Message -
From: Mike WA6ILQ [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, November 30, 2004 5:20 AM
Subject: Re: [Repeater-Builder] need input on changing Mitrek
I have a repeater controller Model AP4800 Repeater Controller by
John Bell seems to be a 1994 or 1995 vintage.
I have part of the manual but several pages are missing and I have
searched all over the internet and have been unsucessful of finding
a copy of the manual.
I also searched
THANK YOU so much for having that on your website!!! I want to also
thank Ray Rosler VE5RAE for emailing me the manual. This is a great
resource!
--- In Repeater-Builder@yahoogroups.com, Scott Zimmerman
[EMAIL PROTECTED] wrote:
Bruce,
Check out the recent addition to the Repeater
biles were not duplex.
In my first two conversions I used small hardline
to replace the coax entirely, but maybe this is not
necessary?
Thanks
Bruce, ve1ii
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from
- Original Message -
From: Tedd Doda [EMAIL PROTECTED]
To: Repeater Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 24, 2004 10:24 AM
Subject: [Repeater-Builder] Free Preamp Encloser.
Hi Guys:
Does anyone have any use for a well heatsinked preamp
encloser? The active
Sorry about that last message from me hit send b4 I typed anything else!
:-(
Tedd I would be interested in getting that enclosure from you.
Please send info re payment directly to me.
[EMAIL PROTECTED]
Thanks,
bruce, ve1ii
- Original Message -
From: Tedd Doda [EMAIL PROTECTED
I'm looking for a manual for a VHF Mostar, the display version is best
but the NVR version will work too. I can pay via PayPal, cashiers
check.
Thanks in advance,
Bruce WB6ARE
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
MIBs are almost non-existant these days. Does anyone have a MIB
schematic they are willing to share?
Thanks in advance,
Bruce WB6ARE
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
I have a question about logic circuits. I
have a Yaesu FT 1500 that has the data port on the back and I want to use the
1500 as a temporary receiver in my repeater while the acutal receiver is out for
repairs. Here is my problem, the data output port has a COS pin out (Carrier=5
volts,
58 matches
Mail list logo
