is this becoming an issue with me?
Any suggestions? Anyone know of a good waterproof cabinet that can
go outside? Is that a good idea? Help.
Justin
--
Justin W. Pauler
Baton Rouge, LA
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater
I'll throw this in just because; I'm not sure if it's the case with
the VXR-5k, but for what it's worth on the VXR-7k you must solder a
jumper from a pad out to one of the pins on the rear to bring the COS
logic out.
Like I said, not sure if this is applicable to the VXR-5K, but just a
heads up
Good Evening Folks...
While I would prefer to install a DB products folded dipole antenna at
a new site I'm preparing, cosmetic issues are not going to allow me to
do so. Somehow I'm sure though, others have been in my place before.
Therefore, my question is, what is everyone using for a
The VXR-7000 trickle charger can only be disabled via a hardware
modification; you must go inside and unsolder a resistor. If you would like
a copy of the E-Mail from Vertex hit me off list and I'll send it your way.
--
Justin W. Pauler
E-Mail: [EMAIL PROTECTED]
WWW: http://www.jwpauler.org
flights of stairs and I can
get to the equipment with relative ease.
Does this help any?
--
Justin W. Pauler
E-Mail: [EMAIL PROTECTED]
WWW: http://www.jwpauler.org
-Original Message-
From: sentto-104168-44263-1100610463-
[EMAIL PROTECTED] [mailto:sentto-104168-44263-
[EMAIL PROTECTED
would be inefficient going from DC to AC and in some cases, back to DC. I
also doubt that I would be able to get much life from a UPS (even with the
two 100A/Hr batteries connected).
So, does anyone have any suggestions?
--
Justin W. Pauler
E-Mail: [EMAIL PROTECTED]
WWW: http://www.jwpauler.org
hearing that this process
would be inefficient going from DC to AC and in some cases, back to DC. I also
doubt that I would be able to get much life from a UPS (even with the two
100A/Hr batteries connected).
So, does anyone have any suggestions?
Justin W. Pauler
Yahoo! Groups Links
7 matches
Mail list logo