RE: [Repeater-Builder] Micor Repeater Question

> I have a friend running a 75W Micor UHF repeater and he needs > to operate it for a single user who uses regular PL tone. My > friend has a PL module installed on the Tone Squelch board in I presume you mean audio-squelch board. > Does he need a single PL tone encoder card for the card cage

[Repeater-Builder] Micor Repeater Question

Greetings Repeater Gurus! Hope everyone had a great weekend! I have a few questions for youhope its an easy answer. I have a friend running a 75W Micor UHF repeater and he needs to operate it for a single user who uses regular PL tone. My friend has a PL module installed on the Tone Squelc

Re: [Repeater-Builder] Micor repeater audio

I know no one cares to see my graphs... But I posted another one anyways. Thank you for this little nugget! I suspected the PL filter as well Threw those resistors on tonight, and while the difference in response measured is not that great, the difference to the ear is huge! This really clea

Re: [Repeater-Builder] Micor repeater audio

Jeff DePolo wrote: your input Mike >>> >> I don't have a real answer for you, but it's interesting that >> I have had >> the opposite experience with the two most recent Micor UHF stations I >> put on-line. Both have a peak very near to 400 Hz, and roll >> off several >> dB/octave above that

Re: [Repeater-Builder] Micor repeater audio

inal Message- From: Kevin Custer To: Repeater-Builder@yahoogroups.com Sent: Wed, Nov 18, 2009 9:54 am Subject: Re: [Repeater-Builder] Micor repeater audio Jeff DePolo wrote: I have had he opposite experience with the two most recent Micor UHF stations I ut on-line. Both have a peak

Re: [Repeater-Builder] Micor repeater audio

Jeff DePolo wrote: I have had the opposite experience with the two most recent Micor UHF stations I put on-line. Both have a peak very near to 400 Hz, and roll off several dB/octave above that. Setting for 3 in/3 out @ 1KHz, I get abt 4 out @ 400 hz, and abt, oh, 1.5 or so at 3K. Anyone els

RE: [Repeater-Builder] Micor repeater audio

> > mzfb2001 wrote: > > I was looking in the files section and may have missed it, but I am > > looking to improve the transmit audio quality on my UHF transmiter. > > I've noticed that the audio is lacking in lows its not tinny but its > > not what I would call normal audio from a Micor. The audi

[Repeater-Builder] Micor Repeater Channel elements needed

Hi all, I'm looking for a set of channel elements for a Micor repeater. Receive on 146.16 MHz, Transmit on 146.76 MHz. I've a set of elements for 147R945/147T345 to trade. Thanks in advance, Dave Novotny, WA6IFI dave.novo...@gmail.com

Re: [Repeater-Builder] Micor repeater audio

here smarter than me has a logical explainationI'll wait to read it. Tom W9SRV --- On Tue, 11/17/09, TGundo 2003 wrote: > From: TGundo 2003 > Subject: Re: [Repeater-Builder] Micor repeater audio > To: Repeater-Builder@yahoogroups.com > Date: Tuesday, November 17, 2009,

Re: [Repeater-Builder] Micor repeater audio

Yes, I just measured mine out last week (again) and I believe I have the same thing. I will measure it exactly tommorow and post my findings. Tom W9SRV --- On Mon, 11/16/09, wd8chl wrote: > From: wd8chl > Subject: Re: [Repeater-Builder] Micor repeater audio > To: Repeate

Re: [Repeater-Builder] Micor repeater audio

mzfb2001 wrote: > I was looking in the files section and may have missed it, but I am > looking to improve the transmit audio quality on my UHF transmiter. > I've noticed that the audio is lacking in lows its not tinny but its > not what I would call normal audio from a Micor. The audio levels and

Re: [Repeater-Builder] Micor repeater audio

mzfb2001 wrote: > I was looking in the files section and may have missed it, but I am looking > to improve the transmit audio quality on my UHF transmiter. I've noticed that > the audio is lacking in lows its not tinny but its not what I would call > normal audio from a Micor. The audio levels a

RE: [Repeater-Builder] Micor repeater audio

. Others may have some suggestions to add. -Kevin -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of mzfb2001 Sent: Saturday, November 14, 2009 12:51 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Micor repeater

[Repeater-Builder] Micor repeater audio

I was looking in the files section and may have missed it, but I am looking to improve the transmit audio quality on my UHF transmiter. I've noticed that the audio is lacking in lows its not tinny but its not what I would call normal audio from a Micor. The audio levels and on frequency adjustme

Re: [Repeater-Builder] Micor Repeater Modifications

tahrens301 wrote: > Hi Folks, > > I picked up a bunch of Micor repeaters today, > and as I figured, they have the TLD xxx4 > receiver in them. (160-174mhz). > > I know that to put on 2 meters, new resonators > & some other stuff is required, but is it > necessary if I go down to 154? > > I'm wo

Re: [Repeater-Builder] Micor Repeater Modifications

tahrens301 wrote: > Hi Folks, > > I picked up a bunch of Micor repeaters today, > and as I figured, they have the TLD xxx4 > receiver in them. (160-174mhz). > > I know that to put on 2 meters, new resonators > & some other stuff is required, but is it > necessary if I go down to 154? > Yes, th

Re: [Repeater-Builder] Micor Repeater Modifications

They might tune done. If not, try brass screws. I've used this to move high splits to 2 meters. tahrens301 wrote: > > > Hi Folks, > > I picked up a bunch of Micor repeaters today, > and as I figured, they have the TLD xxx4 > receiver in them. (160-174mhz). > > I know that to put on 2 meters, n

[Repeater-Builder] Micor Repeater Modifications

Hi Folks, I picked up a bunch of Micor repeaters today, and as I figured, they have the TLD xxx4 receiver in them. (160-174mhz). I know that to put on 2 meters, new resonators & some other stuff is required, but is it necessary if I go down to 154? I'm working on this as a backup repeater for o

Re: [Repeater-Builder] Micor Repeater

At 04:29 PM 09/28/09, you wrote: >I am building up a Micor repeater using a unified chassis >for use in Montana on a Mountain site. Site owner does not >want a micor power supply. He has station batteries and charger >system. > >Does anyone have a regulator circuit to make the 9.6 vdc and audi

[Repeater-Builder] Micor Repeater

I am building up a Micor repeater using a unified chassis for use in Montana on a Mountain site. Site owner does not want a micor power supply. He has station batteries and charger system. Does anyone have a regulator circuit to make the 9.6 vdc and audio 12 vdc necessary for the unified chas

[Repeater-Builder] Micor repeater UHF

Got a Micro low power UHF repeater that was just removed from a tower site for new unit. it has a 10 watt output at this time it is on 463.xxx have other elements if other wanted. will need a controller as it had a Zetron 48 but it will be removed. $50.00 add shipping and pack items.

[Repeater-Builder] Micor repeater channell element ????

hi all i am looking for a pair of used channell element for my Micor repeater,it is the big cabinet,125 watts output. Before i order a set of crystals maybe i can find a set here in the group. thanks for your help tx 145.450 rx 144.850 gervais ve2ckn

RE: [Repeater-Builder] Micor Repeater

Subject: Re: [Repeater-Builder] Micor Repeater Buenos dias requieroRetiranme del grupo y no recivir mas mensajes gracias --- El lun 16-feb-09, Hector Ricaurte escribió: De:: Hector Ricaurte Asunto: Re: [Repeater-Builder] Micor Repeater A: Repeater-Builder@yahoogroups.com Fecha: lunes, 16

Re: [Repeater-Builder] Micor Repeater

Buenos dias requieroRetiranme del grupo y no recivir mas mensajes gracias --- El lun 16-feb-09, Hector Ricaurte escribió: De:: Hector Ricaurte Asunto: Re: [Repeater-Builder] Micor Repeater A: Repeater-Builder@yahoogroups.com Fecha: lunes, 16 febrero, 2009, 4:00 pm --- El lun 16

Re: [Repeater-Builder] Micor Repeater

--- El lun 16-feb-09, Ralph S. Turk escribió: De:: Ralph S. Turk Asunto: Re: [Repeater-Builder] Micor Repeater A: Repeater-Builder@yahoogroups.com Fecha: lunes, 16 febrero, 2009, 3:28 pm Neal No, this repeater is going to NW Montana to be connected to our (Cactus Intertie ) system that

RE: [Repeater-Builder] Micor Repeater

hoogroups.com Sent: Monday, February 16, 2009 5:54 PM Subject: Re: [Repeater-Builder] Micor Repeater Ralph S. Turk wrote: Kevin Unified Chassis meaning TX on top Control Shelf and Rx etc on bottom. Most chassis' were set-up this way, so please read on - and answer again. A Unified Chas

Re: [Repeater-Builder] Micor Repeater

Message - From: Captainlance To: Repeater-Builder@yahoogroups.com Sent: Monday, February 16, 2009 7:10 PM Subject: Re: [Repeater-Builder] Micor Repeater Where are they?,complete or parts?, cabinets? how many and how much? Lance N2HBA - Original Message - From: Maire

Re: [Repeater-Builder] Micor Repeater

Where are they?,complete or parts?, cabinets? how many and how much? Lance N2HBA - Original Message - From: Maire-Radios To: Repeater-Builder@yahoogroups.com Sent: Monday, February 16, 2009 6:10 PM Subject: Re: [Repeater-Builder] Micor Repeater FYI have a number UHF 460

Re: [Repeater-Builder] Micor Repeater

Ralph S. Turk wrote: Hi Kevin and all Looks like I found the problems. Good. That was easy on my part... Where do you pull the disc off for an external Squelch controller and control system I have been using pin 15 of the RX connector on the main board. Pin 3 of the Audio & Squelch boa

Re: [Repeater-Builder] Micor Repeater

FYI have a number UHF 460 to 470 band Unified chassis repeaters for sale very low cost some working some for parts. John - Original Message - From: Kevin Custer To: Repeater-Builder@yahoogroups.com Sent: Monday, February 16, 2009 5:54 PM Subject: Re: [Repeater-Builder

Re: [Repeater-Builder] Micor Repeater

I should have added all metal connection with rear mother board. Unified Chassis. Ralph - Original Message - From: "Kevin Custer" To: Repeater-Builder@yahoogroups.com Sent: Monday, February 16, 2009 3:54:41 PM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeat

Re: [Repeater-Builder] Micor Repeater

Ralph S. Turk wrote: Kevin Unified Chassis meaning TX on top Control Shelf and Rx etc on bottom. Most chassis' were set-up this way, so please read on - and answer again. A Unified Chassis is a chassis that _is not_ made up of separate rack-mounted units. The Non Unified Chassis is exactly w

Re: [Repeater-Builder] Micor Repeater

- Original Message - From: "Kevin Custer" To: Repeater-Builder@yahoogroups.com Sent: Monday, February 16, 2009 6:05:27 AM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Micor Repeater Ralph, Okay, I mis-understood. I thought the repeater th

Re: [Repeater-Builder] Micor Repeater

er-Builder@yahoogroups.com Sent: Monday, February 16, 2009 7:43:03 AM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Micor Repeater Hey Ralph is this Repeater going to be located at Star Pass Resorts? that overlooks the Entire City of Tucson... Nice Place to Vist..

Re: [Repeater-Builder] Micor Repeater

: From: Ralph S. Turk Subject: Re: [Repeater-Builder] Micor Repeater To: Repeater-Builder@yahoogroups.com Date: Sunday, February 15, 2009, 10:36 PM #yiv1042346347 p {margin:0;} Hi Kevin This repeater I am working on is here in Tucson. I will have additional data tomorrow.  I will email it to

Re: [Repeater-Builder] Micor Repeater

ebruary 16, 2009 6:05:27 AM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Micor Repeater Ralph, Okay, I mis-understood. I thought the repeater that you are working on was at your son's place. Let me know when you want to get started and I'll try

Re: [Repeater-Builder] Micor Repeater

Ralph, Okay, I mis-understood. I thought the repeater that you are working on was at your son's place. Let me know when you want to get started and I'll try to walk you through. Oh - one question, is it a Unified or Non Unified Chassis? Kevin Hi Kevin This repeater I am working on is here

Re: [Repeater-Builder] Micor Repeater

groups.com Sent: Sunday, February 15, 2009 5:11:32 PM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Micor Repeater Ralph, Sounds good. I'll try to be available when you get the equipment to your son. Kevin Hi Kevin Yes I do. I built one micor repeater

Re: [Repeater-Builder] Micor Repeater

Ralph, Sounds good. I'll try to be available when you get the equipment to your son. Kevin Hi Kevin Yes I do. I built one micor repeater with no trouble last summer. Worked like a charm. The only problem it is located in Montana with my son, N7XVF where I can't get to it to make any me

Re: [Repeater-Builder] Micor Repeater

e for his CE-6. Thanks Ralph - Original Message - From: "Kevin Custer" To: Repeater-Builder@yahoogroups.com Sent: Sunday, February 15, 2009 7:52:44 AM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Micor Repeater Ralph, Do you ha

Re: [Repeater-Builder] Micor Repeater

Ralph, Do you have available an oscilloscope? If so, I'll try to walk you through the station an resolve the issue. Kevin Custer Hi all. I am working on a Micor repeater (not Mobile) and I am having problems with the Squelch and Audio circuits. Actual original usage of the Micor repeat

Re: [Repeater-Builder] Micor Repeater

Hi all. I am working on a Micor repeater (not Mobile) and I am having problems with the Squelch and Audio circuits. Actual original usage of the Micor repeater is unknown. The repeater will have an external controller. The only module used is the Station Control modified per repeater-build

RE: [Repeater-Builder] Micor Repeater

eater-Builder > Cc: David Turk > Subject: [Repeater-Builder] Micor Repeater > > Hi All. > I am working on several Micor repeaters for use in Montana linking > back to Tucson via the inter-net. > > These are standard 75 watt complete Micor stations. > > My problem

Re: [Repeater-Builder] Micor Repeater

If it were me, I'd suspect the LPF. Sweep it. Chuck WB2EDV - Original Message - From: Ralph S. Turk To: Repeater-Builder Cc: David Turk Sent: Thursday, January 29, 2009 11:36 AM Subject: [Repeater-Builder] Micor Repeater Hi All. I am working on several Micor repeaters for u

[Repeater-Builder] Micor Repeater

Hi All. I am working on several Micor repeaters for use in Montana linking back to Tucson via the inter-net. These are standard 75 watt complete Micor stations. My problem is with the built in circulator that is feed by the PA prior to the duplexer. I have tuned the circulator using both a

Re: [Repeater-Builder] Micor repeater parts

Selling off a old Motorola Micro UHF repeater...parts...TCN 1187A and TLN5649A , with time out timer, encoder board, squelch, etc.  Was recently retired from commercial use, PA already sold, this is the transmitter and receiver boards to make a complete repeater, was working when removed. ...  

[Repeater-Builder] Micor repeater for sale

I have a complete micor uhf repeater for sale it comes with a 90watt pa It has a preamp. It has the 4 micor cans it has the 12 volt power supply it has a rc210 controller with two delay boards and auto patch in it. There are 3 26 amp hour batteries and an astron rs50 amp power supply in it the circ

Re: [Repeater-Builder] Micor repeater

rom: raysagar27 <[EMAIL PROTECTED]> >Date: 2008/03/23 Sun PM 12:18:57 CDT >To: repeater-builder@yahoogroups.com >Subject: [Repeater-Builder] Micor repeater > >I have a C73RXB3106BT it is a Micor compa Repeater. And I want to put >it on 2 meters. Does anyone h

[Repeater-Builder] Micor repeater

I have a C73RXB3106BT it is a Micor compa Repeater. And I want to put it on 2 meters. Does anyone have or know where I can get a set of manuals for it?

Re: [Repeater-Builder] Micor repeater encoder and decoder boards

ubject: Re: [Repeater-Builder] Micor repeater encoder and decoder boards North, Ga., check QRZ.com. -- Doug N3DAB/WPRX486/WPJL709 Maire-Radios <[EMAIL PROTECTED]> wrote: = where are you at? - Original Message - From: n3dab To: Repeater-Buil

Re: [Repeater-Builder] Micor repeater encoder and decoder boards

eater-Builder] Micor repeater encoder and decoder boards North, Ga., check QRZ.com. -- Doug N3DAB/WPRX486/WPJL709 Maire-Radios <[EMAIL PROTECTED]> wrote: = where are you at? - Original Message - From: n3dab To: Repeater-Builder@yahoogroups.

Re: [Repeater-Builder] Micor repeater encoder and decoder boards

peater-Builder] Micor repeater encoder and decoder boards I'm trying to locate a TLN5731A PL encoder board and a TRN6002A PL decoder bd. for a UHF Micor Single User Repeater Station. Any one have a working set laying around that they would like to part with ? If so contact me off

Re: [Repeater-Builder] Micor repeater encoder and decoder boards

where are you at? - Original Message - From: n3dab To: Repeater-Builder@yahoogroups.com Sent: Friday, February 22, 2008 1:47 AM Subject: [Repeater-Builder] Micor repeater encoder and decoder boards I'm trying to locate a TLN5731A PL encoder board and a TRN600

[Repeater-Builder] Micor repeater encoder and decoder boards

I'm trying to locate a TLN5731A PL encoder board and a TRN6002A PL decoder bd. for a UHF Micor Single User Repeater Station. Any one have a working set laying around that they would like to part with ? If so contact me off list please. Thanks Doug N3DAB

Re: [Repeater-Builder] Micor Repeater - ID?

Mike, I think you need to know the following: The receiver is in the bottom of the unified chassis. It has a BNC connector, you should find that on the left hand side facing from the rear. The "un-labled" N (F) connector by the silver box is the transmitter output. Commercial repeaters ar

RE: [Repeater-Builder] Micor Repeater - ID?

yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of MCH Sent: Saturday, February 02, 2008 9:48 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Micor Repeater - ID? Actually, the 'RC' indicates a Micor Unified Chassis and the 'B' indicates 120V AC P

Re: [Repeater-Builder] Micor Repeater - ID?

FLY > > > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Benonis > Sent: Saturday, February 02, 2008 1:38 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Micor Repeater - ID? > > Good

Re: [Repeater-Builder] Micor Repeater - ID?

; > You can get more information by looking at the numbers stamped on the > various boards. > > 73, Eric Lemmon WB6FLY > > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Benonis > Sent: Saturday, Februar

RE: [Repeater-Builder] Micor Repeater - ID?

ps.com Subject: [Repeater-Builder] Micor Repeater - ID? Good day, I just picked up what I believe is a Micor repeater at a Hamfest today for free. I'm told the repeater works, but I can't verify that. Here's what I know about it: Form Factor: Rack-Mounted Model Number: C64RCB-310

[Repeater-Builder] Micor Repeater - ID?

Good day, I just picked up what I believe is a Micor repeater at a Hamfest today for free. I'm told the repeater works, but I can't verify that. Here's what I know about it: Form Factor: Rack-Mounted Model Number: C64RCB-3105AY FCC Xmit Info: CC4224C FCC Rcvr Info: RC0080 Frequenc

Re: [Repeater-Builder] Micor repeater

Don't you have to ground the mic hangup lead? On 11/6/07, Brian R. Chapman <[EMAIL PROTECTED]> wrote: > Does anyone have a jpeg of where to add/delete a jumper to enable > PL decode on a micor repeater? The PL card is already installed!!! > Thanks, Brian nb9e > > > > > > > Yahoo! Groups Lin

[Repeater-Builder] Micor repeater

Does anyone have a jpeg of where to add/delete a jumper to enable PL decode on a micor repeater? The PL card is already installed!!! Thanks, Brian nb9e

[Repeater-Builder] micor repeater and tower

I have a micor complete system cabinet tuned on 443.400 with a pl of 107.2 I am looking to sell it. it has the Motorola cans in it. it has an astron 50 amp power supply and three 26 amp hour gel cell batteries for back up the repeater cabinet has the 12 volt power supply. it also has a arcom rc210

[Repeater-Builder] Micor Repeater Squelch... confusing

Hey All, A while back I built a Micor Repeater. And had all sorts of fun with the squelch circuit. Why is there 2 squelches on that unit, 1 for audio and one for PTT control? Also Keyed A- and Keyed A+, where are those control lines generated from, which transistor is it that sinks current for k

Re: [Repeater-Builder] Micor Repeater

:08 PM Subject: Re: [Repeater-Builder] Micor Repeater Have done a Micor repeater using the CAT-200 controller. It's really quite easy to do. Pull all the cards except the Station Control and the F1 PL Decoder. A mid split PA will work if the output is >147.00 but I don't think

Re: [Repeater-Builder] Micor Repeater

Have done a Micor repeater using the CAT-200 controller. It's really quite easy to do. Pull all the cards except the Station Control and the F1 PL Decoder. A mid split PA will work if the output is >147.00 but I don't think a high split PA will last very long. Strongly suggest if yours is

[Repeater-Builder] Micor Repeater

It has been suggested that before one adds a controller to the repeater it is best to have it "repeat" in it's original configuration. This unit was part of the VHF Provincial Mobile Telephone system and in its present form I can get it to repeat only after "dialing" the code that puts the transmi

RE: [Repeater-Builder] Micor Repeater can not use TS-64

Behalf Of Daniel M LePage Sent: Tuesday, March 06, 2007 10:07 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Micor Repeater can not use TS-64 I have a Micor repeater that I can not get the CTCSS tone through the receiver. I can get a good 1 kHz tone but when I try and put a CTCSS

Re: [Repeater-Builder] Micor Repeater can not use TS-64

You need to feed your decoder with discriminator audio. The Micor de-emphasized audio has little below 300 Hz, Jack K6YC - Original Message - From: Daniel M LePage To: Repeater-Builder@yahoogroups.com Sent: Tuesday, March 06, 2007 10:07 AM Subject: [Repeater-Builder] Micor

Re: [Repeater-Builder] Micor Repeater can not use TS-64

At 10:07 AM 3/6/2007, you wrote: I bet you're using a deemphasized audio output. For the TS-64, you NEED to use discriminator (or other non-deemphasized audio source) in order to decode CTCSS. <---Let me rephrase that (de emphasized audio really has nothing to do with PL decoding). Are you us

Re: [Repeater-Builder] Micor Repeater can not use TS-64

At 10:07 AM 3/6/2007, you wrote: >I have a Micor repeater that I can not get the CTCSS tone through the >receiver. I can get a good 1Khz tone but when I try and put a CTCSS >tone through the receiver it is broken up. >I did not convert this Micor and it will operate as a repeater with out >a CTCSS

Re: [Repeater-Builder] Micor Repeater can not use TS-64

has this repeater ever worked ? John - Original Message - From: Daniel M LePage To: Repeater-Builder@yahoogroups.com Sent: Tuesday, March 06, 2007 1:07 PM Subject: [Repeater-Builder] Micor Repeater can not use TS-64 I have a Micor repeater that I can not get the CTCSS

Re: [Repeater-Builder] Micor Repeater can not use TS-64

Daniel M LePage wrote: > I have a Micor repeater that I can not get the CTCSS tone through the > receiver. I can get a good 1Khz tone but when I try and put a CTCSS > tone through the receiver it is broken up. > I did not convert this Micor and it will operate as a repeater with out > a CTCSS t

[Repeater-Builder] Micor Repeater can not use TS-64

I have a Micor repeater that I can not get the CTCSS tone through the receiver. I can get a good 1Khz tone but when I try and put a CTCSS tone through the receiver it is broken up. I did not convert this Micor and it will operate as a repeater with out a CTCSS tone. It does have a circuit tha

Re: [Repeater-Builder] Micor Repeater Parts needed

Tuesday, January 23, 2007 1:08 AM Subject: [Repeater-Builder] Micor Repeater Parts needed Our club needs MICOR components for the 138-158 VHF range. We currently have a DVP unified chassis and have modified it to work as a repeater using the associated SCM card. It works fine with the

[Repeater-Builder] Micor Repeater Parts needed

Our club needs MICOR components for the 138-158 VHF range. We currently have a DVP unified chassis and have modified it to work as a repeater using the associated SCM card. It works fine with the commercial crystals, exciter and receiver it came with but it is in the Highest portion of the VHF

Re: [Repeater-Builder] Micor repeater amp question..

> I am using a mitrek exciter at 1 watt to drive a Micor TLD1693D amp. > I have tuned it up and it is working great in the 147.xxx range. I > get approx 75 watts at 25 amps draw or so and 110 at 30 amps. I don't > have a Micor base/repeater manual, so I am wondering what current the > Motorola s

RE: [Repeater-Builder] Micor repeater amp question..

Sean, The TPN1110 power supply that is normally found in the 100 watt Compa-Station is rated at 25 amperes. The fact that your PA is drawing 25 amps at 3/4 of its power rating indicates that it is not operating properly, since it is out of band. It would be a good idea to run it at a lower power

[Repeater-Builder] Micor Repeater

Have a Motorola Micor vhf and uhf transmitter and vhf and uhf reciever. Both are linked togerher in the same cabinet. Both key but are not showing any power out to the antenna. Got the repeater the other day and the fellow said he had no problems with it. It has been sitting for over a year.

RE: [Repeater-Builder] Micor Repeater Conversion question

ssage- > > From: Repeater-Builder@yahoogroups.com > > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Perryman > > Sent: Monday, November 14, 2005 2:15 PM > > To: Repeater-Builder@yahoogroups.com > > Subject: Re: [Repeater-Builder] Micor Repeater Conversion question >

RE: [Repeater-Builder] Micor Repeater Conversion question

.com/caps2.html --- Jeff > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Perryman > Sent: Monday, November 14, 2005 2:15 PM > To: Repeater-Builder@yahoogroups.com > Subj

RE: [Repeater-Builder] Micor Repeater Conversion question

Have you tried Motorola directly? Kevin Kevin brings up a Great point , Sometimes We assume that Motorola is Extremely High for Parts, Manuals Etc, and found Cheaper on E-Pay, if you can even find them, But pick up the phone and Call, I have actually found them very receptive and helpful and P

Re: [Repeater-Builder] Micor Repeater Conversion question

Mike Perryman wrote: >Yep.. I have that document... but I am having one hell of a time locating >the dipped micas of correct values... Digikey about 30% good, all common >values... and Newark is the same... the oddball values are near >impossible to locate.. ;-( >mike > Have you tried Mo

Re: [Repeater-Builder] Micor Repeater Conversion question

Yep.. I have that document... but I am having one hell of a time locating the dipped micas of correct values... Digikey about 30% good, all common values... and Newark is the same... the oddball values are near impossible to locate.. ;-( mike At 02:10 PM 11/14/2005 -0500, you wrote: >I ag

Re: [Repeater-Builder] Micor Repeater Conversion question

I agree with Chuck, and here is a GREAT source of 6M Micor information: Kevin Chuck Kelsey wrote: >Don't count on it. You may still need to change a few caps. You'll know >if you get a stage that won't peak. And by that, I mean you need to get >to

Re: [Repeater-Builder] Micor Repeater Conversion question

Don't count on it. You may still need to change a few caps. You'll know if you get a stage that won't peak. And by that, I mean you need to get to the peak and go past it, otherwise you are not really at the peak. Chuck WB2EDV Mike Perryman wrote: > > I have a quick question, which may be a

[Repeater-Builder] Micor Repeater Conversion question

I have a quick question, which may be a simple answer... I am converting a Micor Base-R/T to 6m repeater. The question pertains to modifying the exciter and receiver.. I have located an exciter and receiver in a machine that was tuned (with channel elements included) to 49MHz.. is this the

RE: [Repeater-Builder] Micor repeater power supply

went the extra mile to protect them Just a thought.. be creative!! mike -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Neil McKie Sent: Wednesday, April 27, 2005 8:55 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder]

Re: [Repeater-Builder] Micor repeater power supply

eck of the one I have (new) it is a TPN-1105A that has > the battery hook up for a Micro repeater 75 watt model > > John > > - Original Message - > From: "Neil McKie" <[EMAIL PROTECTED]> > To: > Sent: Wednesday, April 27, 2005 8:55 AM > Sub

Re: [Repeater-Builder] Micor repeater power supply

did a check of the one I have (new) it is a TPN-1105A that has the battery hook up for a Micro repeater 75 watt model John - Original Message - From: "Neil McKie" <[EMAIL PROTECTED]> To: Sent: Wednesday, April 27, 2005 8:55 AM Subject: Re: [Repeater-Builder] Mico

Re: [Repeater-Builder] Micor repeater power supply

I suppose it has been done ... not by me though. I have a few of the TPN1110A/B Power Supply here in two forms - one of them being the 12 volt only version. You have to know what you are looking for to be able to know what the ancestry is. You might want to search the swapmeets for

Re: [Repeater-Builder] Micor repeater power supply

I figured as much. Just thought someone may have come up with a way to tap into the circuit and make it happen. Neil McKie wrote: That power supply wasn't designed for battery back-up use. Neil - WA6KLA John Place wrote: It is a TPN1110B supply. Neil McKie wrote:

Re: [Repeater-Builder] Micor repeater power supply

That power supply wasn't designed for battery back-up use. Neil - WA6KLA > John Place wrote: > > It is a TPN1110B supply. > > Neil McKie wrote: > > > Which Micor Power Supply? > > > > Neil > > > > John Place wrote: > > > > > >> Has anyone come up with a way to power the micor repea

Re: [Repeater-Builder] Micor repeater power supply

It is a TPN1110B supply. Neil McKie wrote: Which Micor Power Supply? Neil John Place wrote: Has anyone come up with a way to power the micor repeater with 12 volts? Would like to have a point in the power supply to hook 12 . volts to for battery backup.

Re: [Repeater-Builder] Micor repeater power supply

If it is a TPN1105A, then the battery back-up is built in. Connect your battery to the large terminal block on the back through a 30 ampere fuse. Be careful to set the output voltage of the power supply so you don't boil the battery. I have one of those power supplies in service he

Re: [Repeater-Builder] Micor repeater power supply

I think it is a TPN1105A, I have a spare somewhere... I think... mike At 05:05 PM 04/25/2005 -0700, you wrote: > Which Micor Power Supply? > > Neil > >John Place wrote: > > > > Has anyone come up with a way to power the micor repeater with 12 > > volts? Would like to have a point in the p

Re: [Repeater-Builder] Micor repeater power supply

Which Micor Power Supply? Neil John Place wrote: > > Has anyone come up with a way to power the micor repeater with 12 > volts? Would like to have a point in the power supply to hook 12 . volts to for battery backup. > > -- Yahoo! Groups Links <*> To visit your group on the w

Re: [Repeater-Builder] Micor repeater power supply

) with the power supply for $600.00 at one time. If you can't find one let me know and I will see how many I have. John - Original Message - From: "John Place" <[EMAIL PROTECTED]> To: "Repeater-Builder" Sent: Monday, April 25, 2005 4:43 PM Subject: [Repeate

[Repeater-Builder] Micor repeater power supply

Has anyone come up with a way to power the micor repeater with 12 volts? Would like to have a point in the power supply to hook 12 volts to for battery backup. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4

[Repeater-Builder] Micor Repeater is PART 95 Type Accepted

Lets put another one to rest. WRITE IT IN STONE! the Micor, at least those with the Transmitter FCC Identifier of CC4224C are Part 95 type accepted. This is the transmitter on my Micor Community Repeater. Here is my journey to this data. I had sent a letter to the FCC Field office back in De

  1   2   >