HELLO ALL
I need a little help on a project,we have 2UhfRitron repeaters,one is2.5 watt (461.2125)and#2is about 6 watts (461.4125)and oneyeasu 25 watt 464.4625.The 2.5 watthas degraded over the years(15 year old repeater)I can not convince thesupervisor that there is a problem with the repeater
Bob,
Use different PL tones on those repeaters. A lot of problems can occur
when tones are the same on co-located radios, even when they operate on
different bands. Preselectors might help solve the interference
problem. Been there...
73, Eric Lemmon WB6FLY
[EMAIL PROTECTED] wrote:
HELLO
@yahoogroups.com
Sent: Sunday, August 14, 2005 2:32
PM
Subject: [Repeater-Builder] REPEATER
INTERMOD
HELLO ALL
I need a little help on a project,we have 2UhfRitron
repeaters,one is2.5 watt (461.2125)and#2is about
6 watts (461.4125)and oneyeasu 25 watt 464.4625.The 2.5
watthas
Thanks Eric
I wish I could change the pl tone, but with 45 + radios in the fleet it is a bit hard.
bob
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo!
they all are licenced2 watt channels andwereoriginally15kof3e, possibly 12kof3e now with the last renewal.I dont know what the vendor did when they installed the yaesu repeaterbutI want tocheck it. Both ritrons should be putting out2 watts butI know they made 2 different models.
-Builder] REPEATER
INTERMOD
they all are licenced2 watt channels
andwereoriginally15kof3e, possibly 12kof3e now with the last
renewal.I dont know what the vendor did when they installed the yaesu
repeaterbutI want tocheck it. Both ritrons should be
putting out2 watts butI know they made 2
On Sun, 14 Aug 2005, [EMAIL PROTECTED] wrote:
I wish I could change the pl tone, but with 45 + radios in the fleet it
is a bit hard. bob
Not as bad as 450, or 4500 radios.
--
Kris Kirby [EMAIL PROTECTED]
BIG BROTHER IS WATCHING YOU!
This message brought to you by the
what kind of units?
- Original Message -
From: Kris Kirby [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August 14, 2005 6:24 PM
Subject: Re: [Repeater-Builder] REPEATER INTERMOD
On Sun, 14 Aug 2005, [EMAIL PROTECTED] wrote:
I wish I could change the pl tone
I have a 440 repeater transmitting 442.850 and receiving on 447.850.
We are hearing interference on the repeater from 453.550 which we
confirmed on a scanner. This 453.550 frequency is not at the same
site as the repeater (it isn't extremely strong), however there are
many other transmitters
If that is the issue, it seems the easiest way would be to replace the
receiver with something that doesn't have a 10.7 MHz IF. Or, even with a
higher quality receiver.
Joe M.
dgrapach wrote:
I have a 440 repeater transmitting 442.850 and receiving on 447.850.
We are hearing interference on
10 matches
Mail list logo