-
From: Bob M.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 5:25 PM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Watch how it drifts when the station cools off or
heats up. While the VCO may lock between, say, 20
and
40, the book
If it IDs at the same time, is that OK?
What about repeaters that send a beacon out every 30
minutes?
These are all being generated by the controller at the
repeater site, and if these transmissions have been
authorized by the trustee and/or control ops, it seems
to be an allowed transmission,
repeaters broadcast the
NASA channel audio at times.
- Original Message -
From: Tony L.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 6:33 AM
Subject: [Repeater-Builder] Re: MSF 5000 CLB
.
__,_._,Recent Activity
a.. 16New Members
b.. 1New
amongst all of these. http://en.wikipedia.org/wiki/Image:Helipic.jpg
Roger W5RD
- Original Message -
From: Jim Miller WB5OXQ in Waco
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 12:00 PM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Probably
Bob,
Sounds like there's a problem with your Arcom controller (RC-210 I guess?).
I've had mine bug out a few times where something similiar would occur, but it
usually corrected itself after being reset. Could be firmware or a bad
programming string somewhere...
As far as the open squelch
I do have the MSF Panel and I will try that and let you know. Thanks
Bob
--- In Repeater-Builder@yahoogroups.com, Bob M. [EMAIL PROTECTED]
wrote:
If you have any kind of MSF metering panel, plug it in
and adjust the receive
.
Thanks
Bob
- Original Message -
From: Andrew G.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 11:11 AM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Bob,
Sounds like there's a problem with your Arcom controller (RC-210 I
guess?). I've had
moved 3 time
and has not been check for alignment.
Thanks
Bob
- Original Message -
From: Andrew G.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 11:11 AM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Bob,
Sounds like there's
08, 2007 11:11 AM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Bob,
Sounds like there's a problem with your Arcom
controller (RC-210 I guess?). I've had mine bug
out
a few times where something similiar would
occur,
but it usually corrected itself after being
I have been looking in the book and did not find that. Were did you find that
at?
Bob
- Original Message -
From: Bob M.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 5:25 PM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Watch how it drifts when
.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 5:25 PM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Watch how it drifts when the station cools off or
heats up. While the VCO may lock between, say, 20
and
40, the book recommends 38uA so it has some room
Were did you find in the book recommends 38uA. I can not find. I have the
instruction manual.
Bob
- Original Message -
From: Bob M.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 6:25 PM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Which
Bob I found it. I looked right over it.
Bob
- Original Message -
From: Bob M.
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 08, 2007 6:25 PM
Subject: Re: [Repeater-Builder] Re: MSF 5000 CLB
Which that are you referring to???
What book did you look
My understanding of the current rules is that would be classified
as broadcasting also. Announcements of any sort, including IDs,
must be associated with repeater receiver activity. If the receiver
has been inactive, the transmitter should be as well.
--- In
My understanding of the current rules is that would be classified
as broadcasting also. Announcements of any sort, including IDs,
must be associated with repeater receiver activity. If the receiver
has been inactive, the transmitter should be as well.
That seems to be the FCC's view. Note
15 matches
Mail list logo
