- Original Message -
From: Mike Morris [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 11:31 PM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
One handy piece of test equipment for repeater controllers is a
old set of PC amplified speakers. The three
I suggest that you call NHRC, they are available weekday evenings to talk to a
live person. Check their web page for times. I just spoke to him last week
about a question on the NHRC-4M2 and he was very helpful.
73, Joe, K1ike
steve [EMAIL PROTECTED] wrote:
Hi Mike
I have tried a
might be a little bit expensive, calling from the UK
-Original Message-
From: [EMAIL PROTECTED]
Sent: Feb 20, 2006 4:04 PM
To: Repeater-Builder@yahoogroups.com
Cc: steve [EMAIL PROTECTED]
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
I suggest that you call NHRC
]
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
I suggest that you call NHRC, they are available weekday evenings to
talk to a live person. Check their web page for times. I just spoke to
him last week about a question on the NHRC-4M2 and he was very helpful.
73, Joe, K1ike
-
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Cc: steve [EMAIL PROTECTED]
Sent: Tuesday, February 21, 2006 12:04 AM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
I suggest that you call NHRC, they are available weekday evenings to talk
to a live person. Check their web
Hi
wishfull thinking, unfortunately it is United Kingdom
73
Steve M1SWB Liverpool UK, Great Britain
- Original Message -
From: Joe [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 21, 2006 12:31 AM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
-
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Cc: steve [EMAIL PROTECTED]
Sent: Tuesday, February 21, 2006 12:04 AM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
I suggest that you call NHRC, they are available weekday evenings
to talk
to a live person. Check
Hi
OK undersood, yes I have used the program generator
Se my email to you.
73
Steve
- Original Message -
From: n1ltl [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 21, 2006 12:42 AM
Subject: [Repeater-Builder] Re: NHRC-4 Controler
Steve,
You must
: Sunday, February 19, 2006 3:17 AM
Subject: [Repeater-Builder] Re: NHRC-4 Controler
Do you have the CAS hooked up from your receiver on the radio thay
you are using for the receiver? If not that would be my guess as to
why the controller doesn't know that you are talking to it.
73 and good
PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 3:17 AM
Subject: [Repeater-Builder] Re: NHRC-4 Controler
Do you have the CAS hooked up from your receiver on the radio thay
you are using for the receiver? If not that would be my guess as to
why the controller doesn't
Hilton [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 3:17 AM
Subject: [Repeater-Builder] Re: NHRC-4 Controler
Do you have the CAS hooked up from your receiver on the radio thay
you are using for the receiver? If not that would be my guess
]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 3:57 PM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
Actually, the NHRC-4 will receive and process DTMF tones without any valid
CAS input transitions. It is designed that way, so it can be commanded
even if there is a stuck
: Jeff Otterson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 3:57 PM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
Actually, the NHRC-4 will receive and process DTMF tones without any
valid
CAS input transitions. It is designed that way, so
by the way
73
Steve
- Original Message -
From: Jeff Otterson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 7:18 PM
Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler
Yes. You should hear a courtesy beep at the least.
Was your NHRC-4 a kit
Do you have the CAS hooked up from your receiver on the radio thay
you are using for the receiver? If not that would be my guess as to
why the controller doesn't know that you are talking to it.
73 and good luck
AC0Y
--- In Repeater-Builder@yahoogroups.com, Steve Bainbridge
[EMAIL PROTECTED]
15 matches
Mail list logo
