Does anyone know where I can find a VPl-1 programming cable? Seen some
on Ebay but they are listed as not working with the VXR-7000, are the
pinouts differant from the mobile ham radios to the repeater the VPL-1
is supposed to work with?
Purchased a UHF repeater to run on Echolink, planning
I did post a schematic that is compatable with the VXR-7000 on the
repeater builder site.
On Thu, Feb 5, 2009 at 12:10 PM, Joe joeariz...@gmail.com wrote:
Does anyone know where I can find a VPl-1 programming cable? Seen some
on Ebay but they are listed as not working with the VXR-7000, are the
need the new ver. of the cable the old one does not work with it.
- Original Message -
From: Joe
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 05, 2009 2:10 PM
Subject: [Repeater-Builder] Vertex VXR 5000
Does anyone know where I can find a VPl-1
[EMAIL PROTECTED] wrote:
Jim, unfortunately the vxr 5000 is just a dumb
repeater. You'll need to run an outboard controller or
install a simple IDer like the one listed below in the
link.
http://www.com-spec.com/insheet/id8insc.pdf;
Regards, Barry
That's surprising to me that Yaesu
@yahoogroups.com
Sent: Wednesday, March 22, 2006 9:23
PM
Subject: RE: [Repeater-Builder] Vertex
VXR-5000
I have one of the 5000's and i have a Link Controller that
never has interfaced correctly since I have had it. Do you have to
rewire the 5000 in any manner other than when it came
At 04:18 PM 03/23/06, you wrote:
Terry,
I've interfaced a Link Com Club
Deluxe II to our Vertex VXR-5000. It did not require any rewiring
except for the verification of a Yaesu factory mod. All interfacing
was done via the DB-25 connector on the bottom panel.
One nice benefit of
-Builder@yahoogroups.com
Sent: Thursday, March 23, 2006 11:30
PM
Subject: Re: [Repeater-Builder] Vertex
VXR-5000
At 04:18 PM 03/23/06, you wrote:
Terry,I've interfaced a Link Com Club Deluxe II
to our Vertex VXR-5000. It did not require any rewiring except
Hi group,
Have two repeater problems to figure out. I am trying to
add a CWID 51B (CSC) to a Vertex VXR-5000 440 repeater,
looking for application notes for it. Sent an email to CSC
no luck yet, also need to change ID to my Call sign, IC still
available, anyone know??
Doesn't the
Jim, unfortunately the vxr 5000 is just a dumb
repeater. You'll need to run an outboard controller or
install a simple IDer like the one listed below in the
link.
http://www.com-spec.com/insheet/id8insc.pdf;
Regards, Barry
--- Jim B. [EMAIL PROTECTED] wrote:
Hi group,
Have two
The VXR-5000 as far as I know didn't have it's CWIDer
can't find my service manual anywhere,
Mike A N1KTD
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, March 22, 2006 3:43 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Vertex VXR-5000
The VXR-5000 as far as I know didn't have its CWIDer
can't find my service manual anywhere,
Mike
I have one of the 5000's and i have a Link Controller that never has interfaced correctly since I have had it. Do you have to rewire the 5000 in any manner other than when it came from the factory when installing thr Pacific Research controller? Eric Lemmon [EMAIL PROTECTED] wrote: Mike,You're
: Wednesday, March 22, 2006 7:24 PMTo:
Repeater-Builder@yahoogroups.comSubject: RE: [Repeater-Builder]
Vertex VXR-5000
I have one of the 5000's and i have a Link Controller that never
has interfaced correctly since I have had it. Do you have to rewire the
5000 in any manner other than when it came from
Hi group,
Have two repeater problems to figure out, I am trying to
add an CWID 51B (CSC) to a Vertex VXR-5000 440 repeater,
looking for apllication notes for it. Sent an email to CSC
no luck yet, also need to change ID to my Call sign, IC still
available, anyone know??
Have a MSF-5000
: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Michael Antoine
Sent: Tuesday, March 21, 2006 4:01 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Vertex VXR-5000
Hi group,
Have two repeater problems to figure out. I am trying to
add a CWID 51B (CSC
15 matches
Mail list logo
