The data sheet for HI-AMP circuit protectors can be found at:
http://www.bussmann.com/library/bifs/2065.PDF
73, Eric Lemmon WB6FLY
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an
I would like to say Thanks for all the Help I got on the circuit Breaker
and Relay question , Here is one that was sent to Me By Phil
N3CDY http://tinyurl.com/3xya3
Looks like that will work Fine
Thanks Don KA9QJG
Yahoo! Groups Links
* To visit your group on the web, go to:
Loren,
I will assume that this repeater has been operating with carrier squelch
for a long time, and that the problem suddenly occurred a few days ago,
and is continuous.
From the symptoms, it seems as if the receiver is either picking up a
spurious signal due to a defect in or intermodulation
Hi Eric,
Anyone have a good design for a high quality Audio circuit to put in between the discrimanator and the TX audio? I not looking for the typical repeater controller design as I've been there and done that. I want the highest posible quality of audio reproduction I can get.
As we're
Hello, Is anybody using the FTL-RBI interface ? I belive it is a product
from Pacific Research.
If so are there any up and down on the RBI
thanks
Brent KF4TNP
http://www.qsl.net/kf4tnp
brent at tnweb.com
---
[This E-mail scanned for viruses at TNWEB LLC]
Yahoo! Groups Links
* To visit
Does anyone have a copy of the manual for a vertex
5000 two meter repeater, or know where to get one?
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Hello Bob, so tell me what kind of buffering Op Apm
are you using in you controllers? I've used the LM324
quad opamps but I can still tell I my audio sound
different comming out of my HT than the repeater. I am
taking my audio directly off the discrimanator going
through a opamp with de-emphasis
Hi Eric,
Hello Bob, so tell me what kind of buffering Op Apmare you using in you controllers? I've used the LM324quad opamps but I can still tell I my audio sounddifferent comming out of my HT than the repeater. I amtaking my audio directly off the discrimanator goingthrough a opamp with
Alan,
You can buy the service manual for a VXR-5000 repeater directly from the
Yaesu/Vertex Parts Department for less than half the cost of copying a
manual, since it is large and there are many fold-out schematics in
color. Visit www.vertexstandard.com for more information.
73, Eric Lemmon
Don, tell them you want a charlton heston fog lamp relay, if it is a
bosch unit it will indicate 40A melted into the plastic and will work
fine except the micor uses different voltage levels, 9.6 and 12 - there
was a discussion about this last autumn comparing the moto family to
some other that
Oh, then you want a thermal reset breaker which NAPA stores sell for
universal use, costs around ten bux, I put one in for my battery
isolator in my travel van. If you are far away from NAPA try a camping
store that sells generator equipment.
Don wrote:
I should of Worded that differently,
Virden Thank You for taking time to Help Me on This , when I posted the
first time for Some reason I Said Relay , Which I do not need because all
that Ckt is Built into the Astron with the Battery Back up option
What I really need is a Circuit Breaker and Someone had told Me top get
This one
--- Eric Harrison [EMAIL PROTECTED] wrote:
Hello Bob, so tell me what kind of buffering Op Apm
are you using in you controllers? I've used the
LM324
quad opamps but I can still tell I my audio sound
different comming out of my HT than the repeater. I
am
taking my audio directly off the
Hi to all! I have a GE Mastr II Power Supply For Sale! It has the
Battery Back-up Kit installed with factory cables. I am in Cleveland,
Ohio if someone in the area is interested for pick-up or i can ship!
but it is very heavy! Thanks, Bill N8LXM 443.125
Yahoo! Groups Links
* To visit your
Joe,
I think you forgot another likely reason: The HIGH PASS FILTER in the
mic circuit. Like the high frequency energy, there is also a lot of low
frequency energy (below 300 Hz) on simplex that is being stripped by the
high pass filter in the mic circuit that ensures CTCSS frequencies in
the
We just picked up an RCA Repeater but know nothing about it.
The model # is COLL4KJA.
Does anyone have a manual or know how to move this to the ham bands?
It is on 460.xxx Mhz.
Bill WA9BA
Yahoo! Groups Links
* To visit your group on the web, go to:
does anyone now where to get an so-239 with a shield or just a shield for an
so-239?
this is the shield that covers the back side up where the coax is connected
to the connector.
what is the best type of coax to use inside of a micor for installing a
receive antenna?
Yahoo! Groups Links
Why go throuh all that? You can but 900 MHZ Motorola 900 MHz
Maxtrac's, GTX's and so on already on 900 MHZ.
I have picked up a few on eBay and they work just fine as a
rule.
Good Luck,
Russ, W3ch
- Original Message -
From:
DIGITEL
S.A.
To:
Hello All
I have just com into a motorola test set model s1059a
2 Optional Modules installed: Peaking Generator and Deviation
Meter Panel.
I am looking for the user/ service manual for this unit ..
no batt's installed and I want to make sure I get the correct ones or
the pulg for ext.
I tried this on the H16 it worked but for the H16T it did not.
Joey
From: Mike DeWaele [EMAIL PROTECTED]
Reply-To: Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] ICOM H16T ACCESS CODE
Date: Sun, 4 Apr 2004 16:23:07 -0400
hold the function
bill
im intrested ! contact me off group at [EMAIL PROTECTED] btw i live
in springfield,ohio !
stephanie ka8hmj
- Original Message -
From: Bill [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, April 05, 2004 2:07 AM
Subject: [Repeater-Builder] GE Mastr II Power
I use UG-141 and then solder on SMA nut..both from Down-East Microwave.
Then a SMA to Type-N bulkhead (female on both sides) adapter to exit the
case. I re-plumbed both TX and RX this way. Worked very well in a Low-Band
Mitrek.
mike
-Original Message-
From: David Schornak
Stay away from the Ringo's for Repeater use! This was
a poor choice of antenna! I would highly recomend
looking at the Dimmond products. I have had very good
luck using them on repeaters. Besides you get more
peformance form them than a Hustler g144-6.
73's and good luck!
Eric (N7JYS)
--- ki5fw
--- mch [EMAIL PROTECTED] wrote:
Joe,
I think you forgot another likely reason: The HIGH
PASS FILTER in the
mic circuit. Like the high frequency energy, there
is also a lot of low
frequency energy (below 300 Hz) on simplex that is
being stripped by the
high pass filter in the mic
Hi Rick:
The manual is today's post so you should be getting it in about 5 days.
Good luck with the new tester. As mentioned I have used on for about 7
years. The only things I have not used are the peaking generator or the
devation as I have a cushman CE51 that has all the bells and
25 matches
Mail list logo
