[Repeater-Builder] Re: Another Voting Equipment Question.

2006-04-25 Thread John Everson
--- In Repeater-Builder@yahoogroups.com, Kevin Custer [EMAIL PROTECTED] wrote: Hi John, I doubt that the problem lies in the controller, but rather your 'modulator' isn't flat. If you scope the audio path, you should be able to make sure that you don't have excessive roll-off or

[Repeater-Builder] repeater dense

2006-04-25 Thread Ian Wells
Hi everyone.Thanks to everyone that submitted information about my vhf and uhf repeater setup.I tried a bandpass cavity tuned to 473.575 between the maxon transmitter and the mobile notch duplexer and it reduced my desense on both the 473.575 uhf and the 70.5875 meg repeaters so it seems I

[Repeater-Builder] EF Johnson 8640 900 MHz Ham Mods .

2006-04-25 Thread pikeco44
I'm looking to find out what the Mods are for the EF Johnson 8640 900 MHz Mobile radios so I can use them on the 900 MHz Ham Radio Band . Let me know . Thank You . Steve . KB3FSR . YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To

Re: [Repeater-Builder] telco and ctcss tones

2006-04-25 Thread Jim B.
Joe wrote: I thought it was so that they are not harmonically related, and/or will not mix to make another tone? Joe At 04:55 PM 4/24/2006 -0700, you wrote: Here is an age old question that has yet to be answered satisfactorly. What are the CTCSS frequencies derived from? Meaning why

Re: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band

2006-04-25 Thread Jim B.
Dave VanHorn wrote: --- In Repeater-Builder@yahoogroups.com, Juan Tellez [EMAIL PROTECTED] wrote: The one with two splits was the TK-710, the 720 can be programed to full bandwidth, only needs retuning the front end and the both VCO's.. Ours was definitely a TKR-720. Wouldn't tune into

Re: [Repeater-Builder] EF Johnson 8640 900 MHz Ham Mods .

2006-04-25 Thread Jim B.
[EMAIL PROTECTED] wrote: I'm looking to find out what the Mods are for the EF Johnson 8640 900 MHz Mobile radios so I can use them on the 900 MHz Ham Radio Band . Let me know . Pete Dziomba, N2MCI, has a replacement microprocessor for those. Swap the uP, and one chip cap, and reprogram!

RE: [Repeater-Builder] A couple of questions about hard line

2006-04-25 Thread David
Okay sorry about the spelling errors but the coax I have came from a guy who moved to Florida a year or so ago via another ham who's call is k4rjj the numbers on the heliax are as follows he believed that the guy used this hard line on a antenna system or repeater in Marietta, ga 84147 LDF5 50

Re: [Repeater-Builder] A couple of questions about hard line

2006-04-25 Thread Nate Duehr
Joe wrote: Correct, MF tones were used on inter office trunk circuits. These were the tones that people used to simulate to dial free toll phone calls. Each digit was made up of two tones, but not similar to the Touch Tone frequencies. Your taking me back to my old phone company Toll

[Repeater-Builder] Re: A couple of questions about hard line

2006-04-25 Thread Dave VanHorn
--- In Repeater-Builder@yahoogroups.com, David [EMAIL PROTECTED] wrote: Okay sorry about the spelling errors but the coax I have came from a guy who moved to Florida a year or so ago via another ham who's call is k4rjj the numbers on the heliax are as follows he believed that the guy used

RE: [Repeater-Builder] Re: A couple of questions about hard line

2006-04-25 Thread David
No the beam is for my ts2000 you see I am only going to be able to put up one tower on the acreage I have -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Dave VanHorn Sent: Tuesday, April 25, 2006 11:40 AM To:

[Repeater-Builder] Re: sinclair F-201G

2006-04-25 Thread Harold Farrenkopf
The F-201G might be a F150 type hybrid ring duplexer variation if my memory serves me again. It might just be easier to make it into a Q202 type duplexer with capacitor loops and 4 pieces of cable. Sure, the hybrid ring 4 can duplexer gives about 100dB isolation but it doesn't provide much out

Re: [Repeater-Builder] Anetenna Help

2006-04-25 Thread Nate Duehr
Jeff DePolo wrote: Somebody, maybe Larsen or Antenna Specialists, used to make a stiffener for use with NMO mounts. It was basically an oversized brass fender washer with a 3/4 hole in the center. It was thick enough that it stiffened the body near the mount, but flexible enough that it

Re: [Repeater-Builder] Duplexer Wanted

2006-04-25 Thread Nate Duehr
david vanhorn wrote: Look at http://www.repeater-builder.com/tech-info/effectivesens.html http://www.repeater-builder.com/tech-info/effectivesens.html - a writeup from Chris Boone WB5ITT, who happens to be a pretty sharp guy. Very good article. I got a 50dB

[Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread albemarle7
Thank you to all who provided great solutions onsolving tearing effectfrom mobile mountson thin autobody metal vehicles.It all may now be moot because,We all should be aware of legislation being proposed in many states such as "Driving While Distracted" or "Inattentive Driving" laws.

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread Nate Duehr
[EMAIL PROTECTED] wrote: pets. So heads up, be careful, keep one ear to your state capitol and the other to the mobile rig while driving under those low hanging tree branches. Soon we may not need mobile antennas. Gary K2UQ Don't just listen to your State Capitol - TELL them to stop

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread steve
Hi similar laws here in the UK, however it dosn't stop you using hands free kit. 73 Steve - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Cc: [EMAIL PROTECTED] Sent: Tuesday, April 25, 2006 6:51 PM Subject:

[Repeater-Builder] Re: Anetenna Help

2006-04-25 Thread Dave VanHorn
It's a real pity that their motor mounts aren't capable of holding these up. Of all the antennas that need them, these would be the ones. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group,

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread Dick
OK, I'll make a citizens arrest or write a citizens ticket to the next cop I see yakking on his radio while driving his cop car. G Dick - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Cc: [EMAIL PROTECTED] Sent: 25 April, 2006 10:51 Subject:

[Repeater-Builder] Re: Duplexer Wanted

2006-04-25 Thread Dave VanHorn
--- In Repeater-Builder@yahoogroups.com, Nate Duehr [EMAIL PROTECTED] wrote: david vanhorn wrote: Look at http://www.repeater-builder.com/tech-info/effectivesens.html http://www.repeater-builder.com/tech- info/effectivesens.html - a writeup from Chris Boone

[Repeater-Builder] Re: Mobile antenna installation help/fatigued metal

2006-04-25 Thread Dave VanHorn
Don't just listen to your State Capitol - TELL them to stop playing mommie and daddy and that you don't need it. Exactly! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread Jim B.
Dick wrote: OK, I'll make a citizens arrest or write a citizens ticket to the next cop I see yakking on his radio while driving his cop car. G Dick Or talking on his PERSONAL cell phone-which seems to be nearly continuous... -- Jim Barbour WD8CHL Yahoo! Groups Links * To visit

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread Dick
Yup, that, too...and I'll write him a double ticket if I see him eating a donut while driving. LOL!! Dick - Original Message - From: Jim B. To: Repeater-Builder@yahoogroups.com Sent: 25 April, 2006 12:35 Subject: Re: [Repeater-Builder] Mobile antenna installation help/fatigued

[Repeater-Builder] Re: EF Johnson 8640 900 MHz Ham Mods .

2006-04-25 Thread n2mci
Steve, here's the Web page for the mod.: http://home.hvc.rr.com/n2mci/efj864x.html Contact me offline for more details.. -73, Pete N2MCI --- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote: I'm looking to find out what the Mods are for the EF Johnson 8640 900 MHz Mobile

[Repeater-Builder] Looking for Comet CA-350DB 10m/6m base antenna

2006-04-25 Thread Erik Finskas
Hello all. I'm looking for a Comet CA-350DB 10m/6m base antenna for our dual-band repeater project. We have limitations on space so 10m and 6m have to work with the same antenna. I'm unsure is this antenna still in production or even available anymore. If there are other alternatives

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread n . mckie
Ok, I will watch ... from here ... Neil OK, I'll make a citizens arrest or write a citizens ticket to the next cop I see yakking on his radio while driving his cop car. G Dick - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Cc: [EMAIL

Re: [Repeater-Builder] Mobile antenna installation help/fatigued metal

2006-04-25 Thread albemarle7
Excluded from the subject law while in the actual performance of their official duties: a law enforcement officer; a member of a paid, part-paid or volunteer fire department or company; or an operator of an authorized emergency vehicle. I would be careful about trying to do a citizens

[Repeater-Builder] Re: MSF 5000 CODEPLUG VERSION ISSUES

2006-04-25 Thread Tom
Bob, I tried your first idea of reading and writing back to it and BUENO... it worked. Now I can modify it as normal. Strange. Thanks Man, that makes life a whole lot easier now that I don't have to get side tracked with a new problem. Appreciate it! Tom --- In