If you are going to leave the long end open and still have a problem a .001
cap to ground often will solve it
From: Nate Duehr [EMAIL PROTECTED]
Reply-To: Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Ok, here's a weird one
Date:
Nothing fancy... single-shielded RG-58U. That's an interesting
thought that hadn't occurred to me. And with my vertical-separation
setup with the TX antenna up high, that could certainly be a factor.
- Brian
--- In Repeater-Builder@yahoogroups.com, Ralph Mowery [EMAIL PROTECTED] wrote:
---
Wouldn't the pitting give the antenna more surface area, broader bandwidth,
and more gain? DE NU5D
On 2/14/07, John [EMAIL PROTECTED] wrote:
What is a good cleaning solvent for aluminum repeater antennas? I have
an antenna that was exposed to the weather for years and it has become
pitted
Was with vinegar , then rinse and polish with a good auto cream
From: John [EMAIL PROTECTED]
Reply-To: Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Antenna cleaning solvent ???
Date: Thu, 15 Feb 2007 03:16:36 -
What is a good cleaning
Auto part stores carry Aluminum wheel cleaner, it is a strong chemical that
strips off oxidation and leaves a clean , raw, surface. The only problem is
that raw aluminum starts to oxidize immediately. You will need to covert the
antenna with a coating of clear urethane to stop this from
Vincent McKever wrote:
There is a COS point on the main board. A pair of midland radios will
make a great repeater and one will make an easy remote. Much better
that a GE or Motorola. Try it, you'll love it.
Vincent N6OA
Well, I think that is exaggerating a bit, but yeah, they would do
--- In Repeater-Builder@yahoogroups.com, Ken Arck [EMAIL PROTECTED] wrote:
Have a customer with the following issue:
Scenario: Amateur repeater (Mastr II) installed at a 100,000 FM
radio
xmtr site.
Issue: Very low level audio of radio station appears on Mastr II's
xmtr (yes, external
Anybody got a dead/parts 1200 Motorola service monitor??? Looking for
a good 1 mhs oscillator module to buy. Mine went dead. Appreciate
any help. Contact me at [EMAIL PROTECTED]
Thanks, Dale K0JXI
I haven't seen it mentioned yet, but yes, this sounds like a classic
case of Intermood.
I don't think it is classic intermod. Think about it. The deviation
of the broadcast station is 75 kc. A signal that wide cannot be
heard in a receiver designed for 5 kc., except, maybe, VERY
Umm.. what he said. With another twist or two...
Heretofore, it's been assumed the culprit to be main channel RF, because
they're hearing main-channel audio...
You'll want to consider what *other* things may be going on ~~
* STL (studio-transmitter-link) channels ~ typically in the 950 range,
Google Primus Distribution Illinois
Results: www.primuselectronics.com
73
Charles, KS3Z
--- [EMAIL PROTECTED] wrote:
In a message dated 2/14/2007 4:58:40 A.M. Pacific
Standard Time,
[EMAIL PROTECTED] writes:
Primus Distribution in Illinois offers a 30-40%
discount off Vocom's
On 2/14/07, Brian Rau [EMAIL PROTECTED] wrote:
Nothing fancy... single-shielded RG-58U. That's an interesting
thought that hadn't occurred to me. And with my vertical-separation
setup with the TX antenna up high, that could certainly be a factor.
Usually putting the TX up high is backwards?
Depends on which made for hams stuff you're talking about. Would you
consider a comercial low band radio that normally includes the 6 meter
band as being made for ham? Aside from the above it's pretty easy
to move a lot of commercial radios up to the six meter band.
Actually... as hard as a
Hey guys,
I need some suggestions. I need a vhf and a uhf antena.
Here's the requirement. I'm planning to operate both amateur and commercial
stuff from the house.
I'd rather not use a ham antenna in the commercial bands.
Are there some that'll do the 136 to 174 split, and some UHF that'll do
Sinclair makes what you're looking for... but you won't like the
price... and if their customer service is still as bad as my last
experience you won't enjoy trying to resolve any problems that
might pop up.
cheers,
skipp
Jed Barton [EMAIL PROTECTED] wrote:
Hey guys,
I need some
Yep...
About $10K to $15K worth of crap VHF Antennas bad... Doesn't keep
me from buying more... just not the model/type we bought with the
problems that have yet to be resolved. I only get a chance to
grind on them about it at IWCE each year... every year.
Overall Sinclair makes and made
If you find one, it would have to be pretty low gain (like Unity).
Joe M.
Jed Barton wrote:
Hey guys,
I need some suggestions. I need a vhf and a uhf antena.
Here's the requirement. I'm planning to operate both amateur and commercial
stuff from the house.
I'd rather not use a ham
Re: Antennas that work both in commercial and amateur
If you find one, it would have to be pretty low gain (like Unity).
Not really... but as the nature of the bandwidth beast is dealt
with... the 4 dipole antenna gain is not super high (about ~3db).
The dipole antenna I have the problem
--- In Repeater-Builder@yahoogroups.com, mch [EMAIL PROTECTED] wrote:
If you find one, it would have to be pretty low gain (like Unity).
Joe M.
Not necessarily Joe. I have a ASPB-602 which is an Antenna
Specialists number. It is listed in a DB Products catalog from 1996,
and is rated for
I've had issues with the customer service folks at Sinclair also. Will
avoid them in the future when I can. Had a circulator that showed up
and can't be tuned with the normal adjustments to get it back on track.
After several excuses of needing a tax number and then some other
There are a number of old post on this subject. Take a look at the 4 bay
dipole antennas from Antenex (made by Bluewave). VERY broadband. As for
whether or not they are expensive is a matter of personal opinion.
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
I have always steered away from Xantrex controllers, primarily because of the
pathetic temperature specification: 32F to 104F. I have a remote cabin in
Ontario, Canada that has to survive on its own during the winter with
temperatures well outside that range. I suspect many remote
Hi John,
You might check on the newer generation of C series charge
controllers. The spec on the new C60 is pretty good and I'll have
a new C40 next week to beat up on.
Construction is pretty good for what it is. I can't see any reason
why it won't perform well past the mfgrs rated spec.
Anyone have one they are willing to part with?
Thanks,
Mike
Recently I did some research on the membership statistics for this group.
Here's some interesting info:
We have 3,393 members.
556 are in Daily Digest mode.
883 are in Individual Emails mode
275 are in Special Notices mode - i.e. they read the mail via the
YahooGroups web site, and if the
I would have to suggest any copper that has a huge bandwidth will have gain
on only one tuned area , if you do want to span such areas a broadband dummy
load like a Discone might be of use or tuned sticks for each frequency would
be achievable and certainly would be of value in both tx and rrx
--- In Repeater-Builder@yahoogroups.com, Barry C' [EMAIL PROTECTED] wrote:
I would have to suggest any copper that has a huge bandwidth will
have gain
on only one tuned area ,
Well, actually no. Resonance is not a requirement for an effective
antenna with broadband gain. The only
Well lets look at the riddle , swinging a radiator acree 20 or 30 megs of
bandwidth it will tune and still radiate but will it have appreciable gain
away from certain design points?
I think not .
From: Laryn Lohman [EMAIL PROTECTED]
Reply-To: Repeater-Builder@yahoogroups.com
To:
--- In Repeater-Builder@yahoogroups.com, Barry C' [EMAIL PROTECTED] wrote:
Well lets look at the riddle , swinging a radiator acree 20 or 30
megs of
bandwidth it will tune and still radiate but will it have
appreciable gain
away from certain design points?
I think not .
OK, within
I prefer the traditional mode of receiving e-mails from my various Yahoo
Groups. All that extra garbage they add on does nothing for me, other
than grate on my nerves... ;-)
I just wish there was a way to KEEP my settings after an e-mail address
bounce occurs. Seems that I get them every so
--- Barry C' [EMAIL PROTECTED] wrote:
From: Laryn Lohman [EMAIL PROTECTED]
Reply-To: Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Antennas that work
both in commercial and
amateur
Date: Fri, 16 Feb 2007 05:04:02 -
---
You might try ZoopSeal. this product is used on aluminum wheels, valve
covers, manifolds, etc., to keep them from pitting, tarnishing, etc. It
does make the item fairly water-resistant after application. (I've only
seen it demonstrated on TV and the demo was NOT an infomercial.)
It is
FWIW - I have a Crescend UHF PA in operation on my 444.550 machine with
absolutely NO complaints.
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Jim B.
Maire-Radios wrote:
Well I think there are 8 or 9 Vocom/Cresend amps I have in service
all UHF.
33 matches
Mail list logo