For simplex use, you have to have an external antenna relay.
JT
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de Dave Schultheis
Enviado el: Sábado, 28 de Agosto de 2010 01:34 p.m.
Para: Repeater-Builder@yahoogroups.com
Asunto: [Repeater-Builder]
fees.
Thanks for your interest.
Juan Tellez, XE2SI
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de Com/Rad Inc
Enviado el: Miércoles, 26 de Mayo de 2010 11:18 a.m.
Para: Repeater-Builder@yahoogroups.com
Asunto: Re: [Repeater-Builder] TK 880 quest
TK is for LMR, TM for ham mobiles, TH for ham portables and TS for Ham
stations.
JT
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de La Rue Communications
Enviado el: Jueves, 20 de Mayo de 2010 09:13 a.m.
Para: Repeater-Builder@yahoogroups.com
If you happen to find that radios, I have that many KCT19 cables.
JT
Asunto: [Repeater-Builder] TK 880 quest
hello Group
We are looking to purchase 50 to 70 TK880 radios.
Prefer the group II series and if you have KCT 19s attached all the better
Pls state quantity, price and
Item number: 270549058766 at eBay.
JT
Asunto: Re: [Repeater-Builder] DC power cord HKN4137A
I agree, Eric, but I need 30 of them, so even a slightly lower price will be
good. I've found only 1 on Ebay, so I may buy one just to see what the
quality
is like. And the
Have a look at this item: 120522543727 in eBay, this seller has few models
with different
Input/output voltages and currents; lot cheaper, (China made).
JT
James Adkins wrote:
We have a site that we'd like to run our repeater off the cell phone
company's 24vdc power plant, and
Thanks Eric and Brian for your info, will see what to do with them,
maybe eBay??
JT
Asunto: RE: [Repeater-Builder] LCS 2000 Motorola mobile radios
JT,
The model number identifies a 10-channel 15 watt mobile radio that can
receive 851-870 MHz and transmit 806-870 and 851-870
If still need one , have a CS-700, in a good working order; $50.00 shipped:
http://www.connectsystems.com/support/manuals/cs700.pdf
JT
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de Scott Zimmerman
Enviado el: Lunes, 14 de Diciembre de
Please see if programmed in the correct receive frequency, or it is in
narrow instead of wide channel.
JT
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de phillmobile
Enviado el: Domingo, 08 de Noviembre de 2009 05:42 p.m.
Para:
Maybe the gentleman wants a VHF portable repeater for commercial channels,
so the offset will
be a lot more than 600KHz..?
JT
Don't even try doing a portable repeater on 2 meters.
Do it on 440 MHz or 900 Mhz.
-- Original Message --
Received: Wed, 07 Oct 2009 04:15:29 PM PDT
I have both cards available, squelch and pl, mail me direct if interested.
JT
: [Repeater-Builder] MSR2000 Modules wanted
Hi All,
I recently acquired an MSR2000 2 receiver remote base
that I am going to convert to a basic kerchunk-able backup
repeater.
I know I'll need a
The Kenwood series TKR-X20 of repeaters, need a custom programmer, KPT-50 or
KPT-20, some fellows
have done it without them, but you need a lot of time and knowledge of hex
software and a good luck.
JT
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En
The level of the ID can be adjusted in software, do you have it and the
interface cable?
JT
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Dave Nathanson
Sent: Thursday, March 26, 2009 5:13 PM
To: Repeater-Builder@yahoogroups.com
Subject:
I am going to be there Skipp, hope meet you at the Kenwood boot.
Juan Tellez, XE2SI
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Sunday, March 15, 2009 9:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder
Abajo en este correo hay un link que dice ; “unsubscribe” hazle click ahí y es
todo Adios…..!
JT
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Hector Ricaurte
Sent: Wednesday, February 18, 2009 3:59 AM
To: Repeater-Builder@yahoogroups.com
as filters, this solved the problem 100%.
Juan Tellez, XE2SI
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of John Sichert
Sent: Saturday, February 14, 2009 5:13 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Help
The 22U is a synthesized radio, 144-148 MHZ. and I think I have one, let me
look for it.
Juan Tellez
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Lee Pennington
Sent: Tuesday, February 03, 2009 9:40 AM
To: Repeater-Builder@yahoogroups.com
This info I found somewhere in the net, have not tried yet, hope this helps
in your project.
This Repeater is in use, with easy Programmable IRLP mods made for TX PL on
RX PL. Program any pin but one's below for TOR, state active high Program
pin 24 for PL encode on, and pin 25 for PL encode
, there are no batteries included.
Shows use but no abuse, it works a should be.
Please e-mail direct if interested, photos and more details on request .
Juan Tellez, XE2SI
Correo electr�nico comprobado por Spyware Doctor (6.0.0.385)
Versi�n base de datos: 5.10840
http://www.pctools.com/es
I have done when use an external controller, completely disconnect the big
board and wire it direct to
RX/TX assemblies, if you got the manuals is easier.
Juan
_
De: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] En nombre de Dave
Enviado el: Lunes, 08 de Septiembre
See your personal mailbox, I sent it.
Juan
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Jueves, 24 de Julio de 2008 01:21 p.m.
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] VXR-7000 Progamming Software
I called the Vertex
Something like this:
XE2SI
image001.jpgimage002.jpgimage003.jpgimage004.jpg
Look eBay, I have one for sale, item # 190220015824
Juan
_
Asunto: RE: [Repeater-Builder] Re: Still looking for an RBI-1; maybe I have
to build one?
At 5/4/2008 20:20, you wrote:
I know the original poster was looking for an RBI-1 but it may be more
practical in the
UHF are different, VHF are the same.
Juan
Asunto: [Repeater-Builder] Re: Need preamp card for MSR 2000
The preamp for the MSR-2000 Repeater Receivers is probably not
the same as anything offered for the Mitrek Mobile Radio. The
preamplifier board slides/drops into the center of the
What you need from what I understood from your post is to add a delay to the
PL detect and you will
resolve your problem, but the TS64 is not a controller, just a
encoder/decoder.
Juan Tellez, XE2SI
I took care of helping this gentleman, think I can understand better
his/mine language.
Juan, XE2SI
Asunto: [Repeater-Builder] duda con filtros duplexores para repe 2m vhf
primero de todo hola a todos,ya que soy nuevo en el grupo.
mi duda es, que configuracion de filtos es mejor?
para
Try this: http://www.danelec.com/
Juan
Asunto: [Repeater-Builder] Affordable P25 Repeaters?
What manufacturers currently have P25 capable repeaters on the market?
Is the IF also a matter of concern?? 10.7 10.8
Juan
_
De: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] En nombre de Mike Morris WA6ILQ
Enviado el: miércoles, 14 de febrero de 2007 12:34
Para: Repeater-Builder@yahoogroups.com
Asunto: Re: [Repeater-Builder] Re: WTB:
Read here: http://www.pacres.com/products/index.html
Juan
Asunto: [Repeater-Builder] Controllers
Is there a reccomendation for GOOD controller out there that has all
the bells and whistles INCLUDING BUILT IN sub-audible (ctcss) decoder.
We are thinking of moving an old RC-96 to a
My preference will be RLC-4 from Link-comm
.
http://www.link-comm.com/controllers/about.htm
Juan
_
De: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] En nombre de allenittiyavira
Enviado el: domingo, 07 de enero de 2007 11:56
Para:
What exactly do you want to know?
Juan
Asunto: [Repeater-Builder] Kenwood TKR-750 VHF repeater
Anyone have any experience with the versions 1 and 2 of this repeater
and its programming?
NB2A
Tom
The one with two splits was the TK-710, the 720 can be programed to full
bandwidth, only needs retuning the front end and the both VCO's..
Juan Tellez A, XE2SI
EEWW..
I know the 720 was made in at least two band splits, because we got
the wrong one at first and it wouldn't come down
-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Juan Tellez
Sent: Tuesday, April 25, 2006 8:36 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
The one with two splits was the TK-710, the 720 can be programed to full
Have for sale a RLC-3 with the latest firmware, 4 radio cards,
and many other features , you can find more info at
http://www.link-comm.com/controllers/rlc4.htm if interested
mail me direct at xe2si-at-grupocimsa-dot-com .
Juan Tellez XE2SI
-Original Message-
[EMAIL PROTECTED
Looking for the 2004pgm2.exe file for programming a Johnson UHF repeater for
amateur use, have the service manual and that is the file name asked for.
Hope someone can help in this, Thanks in advance.
Juan XE2SI
Yahoo! Groups Links
* To visit your group on the web, go to:
Thanks for the reply Kevin and Skipp, the controller is a V2.06 from what it
says when asked, I have the manual you point me but the problem is there are
commands that does not respond to, will see for an upgrade better, Thanks...
Juan Tellez, XE2SI
-Original Message-
Subject: Re
That will be nice Skipp.. yes a have a friend locally that will do the
burning, would you mail it please: xe2si-at-grupocimsa.com
Thank You.
Juan Tellez, XE2SI
-Original Message-
If you had the means to reprogram the chips, I can
send you a binary or intel hex image of the 3.x
firmware
I looked at it and do not find the V2.06, there is only V3.0
and upgrades...still looking..Thanks.
Juan Tellez
XE2SI
It's available as a PDF download on the ACC Index on RBTIP:
http://www.repeater-builder.com/acc/acc-index.html
Kevin Custer
Site Owner
Juan Tellez wrote:
Subject: RC-85 v2.06
Subject: RC-85 v2.06
Does any one point me to a manual for this RC85 with V2.06,
or better yet if there is a PDF available would be very happy
to receive it. Thanks in advance.
Juan Tellez
XE2SI
Yahoo! Groups Links
* To visit your group on the web, go to:
http
39 matches
Mail list logo