We also use the same idea here ...
we use 2 batts from the scotters .. thay are sealed lead acids . work
great !! and thay can really be drawn down if needed ( that's what
thay where made to do)
and the price is not bad .. we paid $100 each for them and verry
will worth it
and we also
?
73, Eric Lemmon WB6FLY
Rick - VA3RZS/Charlotte - VA3CMR wrote:
the number is TLN 5644A other number is 924790S
Thanks
Rick
On 17 Jan 2005 at 18:34, Eric Lemmon wrote:
Rick,
Please advise the model number of your backplane, stamped in black
ink near the top
Is there a site some where that can help me mod a back plane ?
this is a Micor VHF back plane
there has been 220 mods done to the RX and TX boards but I go to
do a tune up and I don't know whats wrong ..
One of the things to do is un squelch the audio and I get nothing ..
so any and all
Hello group
I am looking for some grounding kits for the LDF5-50A 7/8
Andrews Heliax
I have one allready installed at the top of the coax and was told I
should have one at the bottom also .. any comments on this ?
I want to protect my Ant and repeater system the best I can ..
the ant is a
, Rick - VA3RZS/Charlotte - VA3CMR wrote:
Hello group
I am looking for some grounding kits for the LDF5-50A 7/8
Andrews Heliax
I have one allready installed at the top of the coax and was told I
should have one at the bottom also .. any comments on this ?
I want to protect
I could be wrong but I would say there is a problem with the L . A ..
check it out on a dummy load .. that you know is good .. I looked at
mine and thay are all fine and do not move the swr up and all ...
others might have a better answer for you
Rick
On 7 Jan 2005 at 12:01, Benjamin
I use 12 volt 32AH (lead acid)batts from the scooter and thay work
great thay are sealed so no probs with spills
go to your local bat shop and ask them I got mine for $100
if you don't tell them you are not use'n them for a scooter thay
should not charge you tax
Rick
On 27 Dec 2004 at
2004 at 10:57, Cecil Ferguson wrote:
Fine response, Rick, but why not go to www.batterystuff.com/ and
take a look at their offerings, prices. Also, while there, take a
look at their tutorial, you may appreciate it.
73
Gene, W4FWG
*
Rick - VA3RZS/Charlotte - VA3CMR wrote:
I use 12
or IRLP .. for that matter ..
or build one .. cant be that hard .. do a search for the info ..
Best of luck
Rick
On 23 Dec 2004 at 19:09, Coy Hilton wrote:
One way of doing it is Install Echolink, It doesn't have to be
connected to internet for this, and install Echotime. This way
- VA3RZS/Charlotte - VA3CMR
[EMAIL PROTECTED] wrote:
All my account are gone .. when I get more I will
post to the list .
Todat I have given out about 50 account to fellow
hams ..
Best to all
Rick and Charlotte
why would you want to turn then encode on and off ??
if I had tone squlech on my radio and you turned off your PL I would
never hear you ...
I would allways encode and just turn off your decode
just my $.02 worth
Rick
On 22 Dec 2004 at 17:41, David wrote:
the controller I have
Talk to Bob ..
http://www.mapleleafcom.com/
he does all my duplexer work .. 2 m 440 and 220 ..
he is the guy to see about just about anything
he rebulit my hybrid ring duplexer and did a cable harness for my 4
bay ant .. he used to work for sinclare ...
Tell him Rick (va3rzs) sent ya ..
I just used a step drill bit ... and kep checking .. (the one that looks
like a xmas tree)
I did the same thing about a week ago
the bit even works great when putting through the roof NMO mounts
Rick
On 13 Dec 2004 at 5:02, johnmichaelwelton wrote:
I want to put some N barrell
Thank you verry much ..
any one have these books that would like to seel them . or do you
think moto would still have them ??
Thanks
Rick
On 9 Dec 2004 at 18:07, Neil McKie wrote:
Rick - VA3RZS/Charlotte - VA3CMR wrote:
Back plane
tln 5644a ( on the PCB)
also on it
TCN
ok here is a question
if we use 802.11b but use the upper channels IE 11 we are now
play'n in our band (here in Canada) I don't know about your band
plans in the US ..
so if we where to use the upper limits of the device would we not be
in our rights ??? again this would be for
I have gotton some motorola parts and need help ID'n them
TCN1107a back plane
TLN 144a PA .. ( with above back plane)
amd
TCN 1223A Back Plane
Thanks for any and all help
and yes I did look at batlabs ..
but did not find any info.
Rick
I am in the same boat .. I have a 4 bay going up but don't want the
hard line all the way up ..
mine is 7/8 hardline .. might use 1/2 hardline .. or something smaller
but I will not run the 7/8 all the way up the mast
did that with 1/2 to the ant .. then when it had to come down for
service
here is a cool new site I found ..
sorry for the bandwith if this is no use to you
Rick
http://www.freeantennas.com/
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
Lakefield Ont Canada
Yahoo! Groups Links
* To visit your group on the web, go to:
Hello Guys ..
I have what I belive to be a sinclair folded dipole ant. ( 4bay)
(the coax runs down the support arm into the dipole)
I don't know how wide band this ant is
the inside dim is aprox 33inch the with if the tume I would say a
good 1/2
I am looking to install this on to our
Thanks guys for the help finding out what this ant really is
no I need help rebuilding the cables ..
from the dipole there is about 6-8 inc of cable with a N conn. on it
now to build the cable to allow all 4 dipoles to work together
has any one built the harness for these ??
the freq I
was looking for a little more info then that ..
will it move down to the ham band .. has any one cracked it open to
retune it ?
stuff like that ...
I was given one for our 220 repeater project
Thanks
Rick
On 3 Jun 2004 at 21:50, Glenn Little WB4UIV wrote:
This is a 225-400 MHz
Sorry All I got the part # wrong .. its a TEK-37 and TEK-37A
Thanks
Rick
On 26 Apr 2004 at 20:52, Rick - VA3RZS/Charlotte - VA3CMR wrote:
Hello all ...
I am looking for a Motorola test set adapter cable
model tkn6025a
if any one can help me out that would be great need this cable
I have a pair of moto UHF's $200
On 17 Apr 2004 at 6:54, Roger Ewing wrote:
I am Looking for UHF BpBr Duplexer.
If you have a set e-mail me at [EMAIL PROTECTED]
Yahoo! Groups Links
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
Hello All
I have just com into a motorola test set model s1059a
2 Optional Modules installed: Peaking Generator and Deviation
Meter Panel.
I am looking for the user/ service manual for this unit ..
no batt's installed and I want to make sure I get the correct ones or
the pulg for ext.
I can only tune a xtal up in freq with a small hammer and a grinder :)
On 24 Mar 2004 at 7:42, Russell Filling wrote:
just out of curiosit , how do u program a crystal ? i have a
crystaled GE phoenix , not one with a x2122 in it , i need to know
the frequency mutliplier
Russ
if you get some let me know .. I am looking for 6 units to retro fit a
set of cans I have
thanks
Rick
On 1 Feb 2004 at 8:48, Kevin Berlen, K9HX wrote:
I know this may be a topic that has been discussed before,
but I need to know the value of the piston trimmers used to
tune the notch on
Hello group
I need some help finding some items
I am in need of a UHF micor repeater parts
a back plane, a DC Card , aud gate card (I belive)
and some sort of TX
this is for a project I only need the TX for the project
I need to bring in a 2 wire sig, hence the DC card and have the radio
tried that .. I could hear the phone ring but I could not answer it ..
what a bummer ...
guess I should have gotten another one and put it in a cart
Have a verry good day ! :)
On 7 Jan 2004 at 16:59, Don wrote:
330 watt, low band 42-54MHz
I think I could use it on My cordless
On 6 Jan 2004 at 8:42, Virden Clark Beckman wrote:
well. With walky talky power typically around 5
watts this can be done with 4 cavities instead of the 6 or 7 needed
for higher power, for the 600kc ham vhf band split this each of these
could be made from 3 3lb coffee cans
ok this stament is
Ok Guys and Gals
I have a little problem here
I am getting a crap load of noise off my repeater
I have a Linkcomm Moto squelch
and a RLC2A controller
with a good ol Harris radio
now here is the problem
when I key the radio I can talk and an bad noise follows then the tail
drops
will I
yes Virden is right .. KISS
I was going to write the same message but it has been said ..
I use this on ly alarm system batts and in my cars .. but I don't use
the condom . that would look really funny under the hood and in the
alarm pannels .. ummm maybe I should put it in the pannels ..
I know how to get rid of the 'snap crackle pop '
Stop putting milk on the repeater :)
Sorry I could not help my self
have a good day
Rick
On 6 Jan 2004 at 0:24, [EMAIL PROTECTED] wrote:
Its suppressing how well the 2 meter repeater works under this high
intensity RF field. Everything
Just to let every one know there is a new radio group
[EMAIL PROTECTED]
These radios are great fully duplex radios .. and run at 100% duty
cycle with no modes.
Hope to see some more people there
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
Lakefield Ont
I am suprized Kevin has not posted ...
check hs website repeaterbuilders.com for the 220 stuff
god site and lots of info ..
best of luck
Rick
Happy Shopping Day, Dudes
It's been suggested to me to convert a real radio to 222 repeater
service. I remember docs for that were mentioned
Looking for 19 racks .. would like to shave 2 sides closed
Please email me with info size and pic's
Thanks
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
Lakefield Ont Canada
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
35 matches
Mail list logo