[Repeater-Builder] Re: BiDirectional Repeater Cable?
I have and they actually work just fine. Although they are very basic and provide no repeater controller options, which include a tail or drop out timer unless you buy the model that has it built in. The cable you ask about takes two Motorola 16 pin radios like the GM300 and M120 units, makes one a repeater receiver and the other a transmitter. I make a similar unit using the rear 16 pin plug/jack and in some examples also/or the front mic jace. Be careful about the ebay sold unit, it's very, very easy to put the cable in upside down, there is no plug polarity key, nor is there a real indication of which side of the plug goes up or down. (unless they've changed their design. cheers, skipp [EMAIL PROTECTED] wrote: Has anyone actually used this product?: _http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5813655761_ (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5813655761) Seems to be a repeater maker cable that offers full DUPLEX for both radios, through the Acc pins. Was interested in using this for a few cross-band systems, if we can use a total of only 2 radios for both Tx and Rx that'd be great! Anyone that's used this product, let me know if it works. Thanks! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: BiDirectional Repeater Cable?
Thanks for the response. So this is notwhat I thought it sounds like. We are looking to boost indoor handheld coverage so our theory was to use this cablewith a VHF w/ our main repeater freqsand connect it to a UHFfor handheld transmissions.In this case, both radios would need to be able to RX and TX, not one as Rx and one as Tx. Correct? Also had recommendations for arooftop yagi pointing toourmain repeater, to a bi-directional amp, to a indoor omni. As well ashaving multipleon-site repeaters linkedvia UHF. If you have any other thoughts or experience w/ these please let me know! Most of our sites areabout 2-3 miles apart, but we have one that is about 10-15 miles. The mainrepeater isat about 100ftAAT, but2 of our locations are sitting in a river valley which seems to beblocking a good handheld signal. THanks!-Original Message-From: skipp025 [EMAIL PROTECTED]To: Repeater-Builder@yahoogroups.comSent: Sun, 02 Apr 2006 23:03:17 -Subject: [Repeater-Builder] Re: BiDirectional Repeater Cable? I have and they actually work just fine. Although they are very basic and provide no repeater controller options, which include a tail or drop out timer unless you buy the model that has it built in. The cable you ask about takes two Motorola 16 pin radios like the GM300 and M120 units, makes one a repeater receiver and the other a transmitter. I make a similar unit using the rear 16 pin plug/jack and in some examples also/or the front mic jace. Be careful about the ebay sold unit, it's very, very easy to put the cable in upside down, there is no plug polarity key, nor is there a real indication of which side of the plug goes up or down. (unless they've changed their design. cheers, skipp [EMAIL PROTECTED] wrote: Has anyone actually used this product?: _http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5813655761_ (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5813655761) Seems to be a repeater maker cable that offers full DUPLEX for both radios, through the Acc pins. Was interested in using this for a few cross-band systems, if we can use a total of only 2 radios for both Tx and Rx that'd be great! Anyone that's used this product, let me know if it works. Thanks! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Re: BiDirectional Repeater Cable?
This absolutely could work for you. You seem to have a vhf.repester with poor handheld coverage in the building. Just set up the vhf unit to the correct repeater pairn and use that cable to connect the vhf to a uhf simplex freqm. The handhelds would then be uhf and simplex. Sonanything the vhf hears will go out on uhfn and anything the uhf mobile hears will be transmitted out the. Vhf on the repeaters ibput freq. And will go thru the repeater. People in the building will then hear the uhf tansmission simplex. . Michael P. S. The other ideas can work also,just depends on what you want to accomplish, the cist, and convenience. Sent via BlackBerry from Cingular Wireless -Original Message- From: [EMAIL PROTECTED] Date: Sun, 02 Apr 2006 22:28:19 To:Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: BiDirectional Repeater Cable? Thanks for the response. So this is not what I thought it sounds like. We are looking to boost indoor handheld coverage so our theory was to use this cable with a VHF w/ our main repeater freqs and connect it to a UHF for handheld transmissions. In this case, both radios would need to be able to RX and TX, not one as Rx and one as Tx. Correct? Also had recommendations for a rooftop yagi pointing to our main repeater, to a bi-directional amp, to a indoor omni. As well as having multiple on-site repeaters linked via UHF. If you have any other thoughts or experience w/ these please let me know! Most of our sites are about 2-3 miles apart, but we have one that is about 10-15 miles. The main repeater is at about 100ft AAT, but 2 of our locations are sitting in a river valley which seems to be blocking a good handheld signal. THanks! -Original Message- From: skipp025 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sun, 02 Apr 2006 23:03:17 - Subject: [Repeater-Builder] Re: BiDirectional Repeater Cable? .AOLPlainTextBody { margin: 0px; font-family: Tahoma, Verdana, Arial, Sans-Serif; font-size: 12px; color: #000; background-color: #fff; } .AOLPlainTextBody pre { font-size: 9pt; } .AOLInlineAttachment { margin: 10px; } .AOLAttachmentHeader { border-bottom: 2px solid #E9EAEB; background: #F9F9F9; } .AOLAttachmentHeader .Title { font: 11px Tahoma; font-weight: bold; color: #66; background: #E9EAEB; padding: 3px 0px 1px 10px; } .AOLAttachmentHeader .FieldLabel { font: 11px Tahoma; font-weight: bold; color: #66; padding: 1px 10px 1px 9px; } .AOLAttachmentHeader .FieldValue { font: 11px Tahoma; color: #33; } YAHOO! GROUPS LINKS * Visit your group Repeater-Builder: http://groups.yahoo.com/group/Repeater-Builder on the web. * To unsubscribe from this group, send an email to: [EMAIL PROTECTED]: mailto:[EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service: http://docs.yahoo.com/info/terms/ . Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: BiDirectional Repeater Cable?
Sorry for the bad spelling, still getting used to the blackberry. Michael Sent via BlackBerry from Cingular Wireless -Original Message- From: Michael Yellin [EMAIL PROTECTED] Date: Mon, 3 Apr 2006 02:41:39 To:Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: BiDirectional Repeater Cable? This absolutely could work for you. You seem to have a vhf.repester with poor handheld coverage in the building. Just set up the vhf unit to the correct repeater pairn and use that cable to connect the vhf to a uhf simplex freqm. The handhelds would then be uhf and simplex. Sonanything the vhf hears will go out on uhfn and anything the uhf mobile hears will be transmitted out the. Vhf on the repeaters ibput freq. And will go thru the repeater. People in the building will then hear the uhf tansmission simplex. . Michael P. S. The other ideas can work also,just depends on what you want to accomplish, the cist, and convenience. Sent via BlackBerry from Cingular Wireless -Original Message- From: [EMAIL PROTECTED] Date: Sun, 02 Apr 2006 22:28:19 To:Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: BiDirectional Repeater Cable? Thanks for the response. So this is not what I thought it sounds like. We are looking to boost indoor handheld coverage so our theory was to use this cable with a VHF w/ our main repeater freqs and connect it to a UHF for handheld transmissions. In this case, both radios would need to be able to RX and TX, not one as Rx and one as Tx. Correct? Also had recommendations for a rooftop yagi pointing to our main repeater, to a bi-directional amp, to a indoor omni. As well as having multiple on-site repeaters linked via UHF. If you have any other thoughts or experience w/ these please let me know! Most of our sites are about 2-3 miles apart, but we have one that is about 10-15 miles. The main repeater is at about 100ft AAT, but 2 of our locations are sitting in a river valley which seems to be blocking a good handheld signal. THanks! -Original Message- From: skipp025 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sun, 02 Apr 2006 23:03:17 - Subject: [Repeater-Builder] Re: BiDirectional Repeater Cable? .AOLPlainTextBody { margin: 0px; font-family: Tahoma, Verdana, Arial, Sans-Serif; font-size: 12px; color: #000; background-color: #fff; } .AOLPlainTextBody pre { font-size: 9pt; } .AOLInlineAttachment { margin: 10px; } .AOLAttachmentHeader { border-bottom: 2px solid #E9EAEB; background: #F9F9F9; } .AOLAttachmentHeader .Title { font: 11px Tahoma; font-weight: bold; color: #66; background: #E9EAEB; padding: 3px 0px 1px 10px; } .AOLAttachmentHeader .FieldLabel { font: 11px Tahoma; font-weight: bold; color: #66; padding: 1px 10px 1px 9px; } .AOLAttachmentHeader .FieldValue { font: 11px Tahoma; color: #33; } YAHOO! GROUPS LINKS * Visit your group Repeater-Builder: http://groups.yahoo.com/group/Repeater-Builder on the web. * To unsubscribe from this group, send an email to: [EMAIL PROTECTED]: mailto:[EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service: http://docs.yahoo.com/info/terms/ . Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/