wd8chl wrote:
Speaking of that, I have 7 CSI-32's I want to sell off. An 8th is up at
a site and will be replaced soon. All were removed from service at the
end of last year working. I have cables for the 7, although I don't
think they are factory cables.
I'd like to get $50 a piece for
skipp025 wrote:
Mike,
Check out my free web page on the subject... and after reading
it I can answer questions as I am/was a Service Station for CSI
Tone Panels. The back door code information is available on the
page below.
http://www.radiowrench.com/sonic/so02010.html
and
.
you can contact me off list for further info.
Mike
Specialized Communications
[EMAIL PROTECTED]
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 23, 2008 9:21 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi
Company is dead. I and several others have that info. contact me off site at
de_n3dab at tds.net and i'll look it for you in the manual. Had the same
problem before and puled my hai out trying to get an answer , but it is buried
in the manual if you have one.
--
Doug
Company is dead. I and several others have that info. contact me off site at
de_n3dab at tds.net and i'll look it for you in the manual. Had the same
problem before and puled my hai out trying to get an answer , but it is buried
in the manual if you have one.
--
Doug
the panel in the tone translation mode and
you can't change anything else
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 23, 2008 9:21 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi tone
panels
Mike
try this:
http://connectsystems.com.
John
- Original Message -
From: n3dab
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 24, 2008 1:23 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi tone panels
RE your message to Sk8ipp - Its not 2x3 method
, June 24, 2008 12:23 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi tone panels
RE your message to Sk8ipp - Its not 2x3 method it is a 3x2 method.
the first 3 digits are 356 the last 2 are 00 to 99. and you have to
triy all of them to find the code it is locked up o( ei
,
MikeKB5FLX
Specialized Communications
- Original Message -
From: n3dab
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 24, 2008 12:23 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi tone panels
RE your message to Sk8ipp - Its not 2x3 method
-Builder@yahoogroups.com
Sent: Tuesday, June 24, 2008 12:23 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi tone
panels
RE your message to Sk8ipp - Its not 2x3 method it is a 3x2
method.
the first 3 digits are 356 the last 2 are 00 to 99. and you have
to
triy all
Hi group,
Does anyone know of a backdoor code or a way to reset the access code on the
CSI-32 (not comm spec) tone panels?
Any word on where the company went for support?
They were in Lynnwood, Washington
Thanks,
Mike
I think you can remove the battery for 30 minutes or so and it will
revert back to factory defaults. I know we do that for Trident
controllers... can't remember for sure on the CSI's, but I think that's
correct.
thp
Mike Dietrich wrote:
Hi group,
Does anyone know of a backdoor code or a
Mike,
Check out my free web page on the subject... and after reading
it I can answer questions as I am/was a Service Station for CSI
Tone Panels. The back door code information is available on the
page below.
http://www.radiowrench.com/sonic/so02010.html
and check out the Super 32 and
No cigar,
The backup memory contents are stored in NVram or Zeropower
chips.
cheers,
s.
Tom Parker [EMAIL PROTECTED] wrote:
I think you can remove the battery for 30 minutes or so and it will
revert back to factory defaults. I know we do that for Trident
controllers... can't remember
:21 PM
Subject: [Repeater-Builder] Re: anyone know backdoor to csi tone panels
Mike,
Check out my free web page on the subject... and after reading
it I can answer questions as I am/was a Service Station for CSI
Tone Panels. The back door code information is available on the
page
: anyone know backdoor to csi tone panels
Mike,
Check out my free web page on the subject... and after reading
it I can answer questions as I am/was a Service Station for CSI
Tone Panels. The back door code information is available on the
page below.
http://www.radiowrench.com/sonic
16 matches
Mail list logo
