Hi There Can AnyOne Point Me In The Direction On Where To Get The Diagram Or
How To turn 2 Tait 2010's In to A Repeater Please And Thank You
would anyone know of a way to drive a small npn or pnp transistor from the
14-4 pin on the logic board
Thank you
Ian Wells
Kerinvale Comaudio
mail service 1017,
Biloela,4715.
www.kerinvalecomaudio.com.au
Yahoo! Groups Links
* To visit your group on the web, go to:
Have some in NZ... What are you after especially?
Cheers;
Gareth Bennett
- Original Message -
From: ian wells [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, November 01, 2004 11:27 AM
Subject: [Repeater-Builder] tait t2010
would anyone have a tait t2010
]
- Original Message -
From: Gareth Bennett [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: 01 November, 2004 10:50 AM
Subject: Re: [Repeater-Builder] tait t2010
Have some in NZ... What are you after especially?
Cheers;
Gareth Bennett
- Original Message
would anyone have a tait t2010 for sale in australia
Thank you
Ian Wells
Kerinvale Comaudio
mail service 1017,
Biloela,4715.
www.kerinvalecomaudio.com.au
Please update my email address in your records to my
new address- [EMAIL PROTECTED]
1-email- [EMAIL PROTECTED]
2-email- [EMAIL PROTECTED]
hi guys
I have a small query .I have a tait t2010 as a transmitter in a repeater and
on the bench it produces 25 up watt but when it is hooked up either through
a duplexer or direct to a antenna (antenna agencies bu6 tunned to
freq,cable- 15meters of LMR400 and a swr of 1.5 to 1) my mobile revex
Hi Ian
Yes it is possible.
You will have to add an inexpensive additional ctcss
encoder.Link the cos of the reciever to both the
transmitter and the tone board.If you you have
experience in ctcss board installtions it should be
straight forward.After that with the help of a
schematic follow the
Give this a try,
Turn off the rev. burst.
73 Russ,
- Original Message -
From: ian wells [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 23, 2004 6:17 PM
Subject: [Repeater-Builder] tait t2010
hi guys
i am wondering if there is a way to setup or to program
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 24, 2004 10:47 AM
Subject: Re: [Repeater-Builder] tait t2010
Give this a try,
Turn off the rev. burst.
73 Russ,
- Original Message -
From: ian wells [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent
: [Repeater-Builder] tait t2010
Give this a try,
Turn off the rev. burst.
73 Russ,
- Original Message -
From: ian wells [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 23, 2004 6:17 PM
Subject: [Repeater-Builder] tait t2010
hi guys
i
hi guys
i am wondering if there is a way to setup or to program a t2010 to transmit
a tail without the ctcss tail on the end of a transmission (ie to be used as
the transmitter in a a repeater so while the receiver receives a signal it
activates the t2010 transmitter with a ctcss ,and when the
11 matches
Mail list logo