Re: [Repeater-Builder] Re: New article on Channel Element/ICOM stability - W3KKC

. Kevin, Would it be better to replace the 2 resistors with a small low current TO-92 +5v regulator. That will provide a more stable voltage and is smaller than 2 resistors. Just my 2¢ John John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home p

[Repeater-Builder] Antenna cleaning solvent ???

What is a good cleaning solvent for aluminum repeater antennas? I have an antenna that was exposed to the weather for years and it has become pitted and dirty from the enviroment. Thanks, John

Re: [Repeater-Builder] GE MVS VHF Repeater?

They make great repeaters that are nice and compact. I have one at 1600' in So. Fla with a simple controller and it works great. John, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org dakaratcaptivereefing wrote: >>Okay so

Re: [Repeater-Builder] GE ICOM question

No, but the xtals are the same John. K4AG johnmichaelwelton wrote: >Are the GE Exec and standard MastrII ICOMs (channel elements) >interchangable? > >John/N4SJW >

[Repeater-Builder] Mastr II Station Power Connections

motherboard, but I do not have it. There is a 15 pin connector at the top left of the rear Chassis (not motherboard) with nothing connected to it, but I don't see any number reference, so I don't know what would connect to it. Can someone give me help here?? Thanks. 73, John, K9KA

[Repeater-Builder] 19C327001P2 Document

LBI there is a jumper table for various versions and I wonder if just changing the jumpers will do it?? Any inputs?? Thanks. 73, John, K9KA

[Repeater-Builder] Test-please ignore

Have not been able to post from my old addres so am trying this one John

[Repeater-Builder] Test-ignore

Test-ignore. Checking to se if I can post from this address John, K4AG

Re: [Repeater-Builder] Re: need MVP VHF 25 watt power amplifier

Thanks Ray, I'll do that John

[Repeater-Builder] MVP repeater PA

Hi, I need a good VHF-25watt PA module (19D424309G2 or similar) for a GE MVP repeater . Anyone have one? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] GE MVP VHF power amp.

Hi, I need a good VHF-25watt PA module for a GE MVP (19D424309G2 or similar). Anyone have one? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] PA for GE VHF MVP

Hi, I need a good VHF-25watt PA module for a GE MVP (19D424309G2 or similar). Anyone have one? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] unable to post

Why can't I post to the list 73, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] GE MVP VHF power amp

Hi, I need a good VHF-25watt PA module for a GE MVP(19D424309G2 or similar)repeater. Anyone have one? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] MVP VHF power amplifier

Hi, I need a good VHF-25watt PA module for a GE MVP repeater (19D424309G2 or similar). Anyone have one they want to get rid of? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] 156.7 Hz Versatone Module

Hello group, Does anyone out there have a 156.7 Hz GE Versatone filter module?? The GE part number is 19C320291G1-156.7 and it is a small sealed, ceramic, plug in board. If so give me your price or I will swap for an 82.5 Hz unit. Thanks. 73, John, K9KA

[Repeater-Builder] Re: 156.7 Hz Versatone Module

Hi Scott, That's a great offer, but about an hour after I made my Post I found a dip-switch GE PL board here. I will keep you in mind if I need to use that Versatone board in the future. 73, John, K9KA --- In Repeater-Builder@yahoogroups.com, "Scott Zimmerman" <[EMAIL

[Repeater-Builder] Motorola desk mike HMN1005A

Anyone have any info on a Motorola HMN1005A desk mike. Schematic, pinout or model of radio it was used on? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

Re: [Repeater-Builder] Motorola desk mike HMN1005A

Thanks Gary, that helps alot, now I can connect it up John Gary Glaenzer wrote: >standard Motorola convention is > >brown= Mic Hi >shield=Mic Lo >black =ground >green= PTT >white=PL monitor >

Re: [Repeater-Builder] TKR 820

The COR signal is opposite. I had to use a transistor invertor circuit to use with the NHRC-2. Then we got an NHRC-7 which has a pos or neg COR switch and that solved it John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http

[Repeater-Builder] Motorola power supply

I have a TPN 1136A and a TPN 1175A. Does anybody know how much power these will deliver? Plan to use them on a remote aprs digipeater site with some older GE equipment. Any info would be appreciated. tu 73 john ab9hh

Re: [Repeater-Builder] Re: OT: Radios and Coms in TV and Movies

ou and all the R-B members John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] Woodpeckers, acorns and microwave antennas.

Very interesting video about a microwave link Woodpeckers, acorns and microwave antennas. Click on link below for video http://home.pacbell.net/dredmo1//acorns/bearcreek.htm <http://home.pacbell.net/dredmo1/acorns/bearcreek.htm> John, K4AG

Re: [Repeater-Builder] Off Topic

MCH wrote: >Dual boot is the only way I know of... > What's the best way to do a dual boot? John

Re: [Repeater-Builder] Re: Repeater Insurance?

Dan, I see the same thing. I think that more specifics are needed. Home equipment/tower/antenna or like what I'm looking for liability insurance for the site/tower owner John Dan KC2BEZ wrote: I see a good deal of complaining and anecdotes in this thread, but no solutions. Does a

Re: [Repeater-Builder] Re: Looking for a Motorola job?

Well, like they say, most people quit looking for work when they find a job! John Joe wrote: >Sometimes a job is a job, until you find your next one > >Joe >

[Repeater-Builder] What have I got?

? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

Re: [Repeater-Builder] Antenna sweep - Decibel S420-440-450

Jeff, Thanks for the information on the sweeps. It is very intereesting and will be very useful to many of us John, K4AG

Re: [Repeater-Builder] Re: Radio for repeater use

Have thought about getting a lower PA module John, K4AG

[Repeater-Builder] Cleaning coax corrosion

and the coax is routed around the rampart to the antenna mount and almost impossible to replace. Before the "cable cops" jump on me it's not for repeater service. Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

Re: [Repeater-Builder] Re: Cleaning coax corrosion

Thanks to those that responded. I was able to cut the cable back a little way and use steel wool to clean the braid enough to take solder Thanks, John n3dab wrote: >Since you have to diconnect it at the antenna end (the almost unreachable >place ) and it is not for a repeater, why no

Re: [Repeater-Builder] Best coax for marine use

f you go offshore you need an HF radio, either marine or amateur. John, K4AG ex S/V "Lunch Money" Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email

[Repeater-Builder] Can a cell phone be used instead of a phone line for repeater control?

After reading the subject you probably realized I know nothing about repeaters. Our club has an issue with the phone line, that being money. Long story short, can a cell phone be hooked up to a repeater, in place of having a phone line, for use in controlling the machine? thanks... John

[Repeater-Builder] Re: Can a cell phone be used instead of a phone line for repeater control?

Thanks for all the replys. I'm new on this list and I was pleasantly surprised by all the help. Keep up the good work. We need to keep amateur radio alive. --- In Repeater-Builder@yahoogroups.com, "JOHN" wrote: > > After reading the subject you probably realized

[Repeater-Builder] FRS/GMRS repeater urgently needed for Haiti

ly are operating teams of 2 hams on a wekly rotation at HH2/WX4NHC, which is running VHF and HF comms. Please, no comments about legal issues, this is an emergency and the folk in Haiti need all the help they can get at this point in time Thank you, John -- John Mc Hugh, K4AG Coordinator for

[Repeater-Builder] FRS/GMRS repeater urgently needed for Haiti

Please disregard my call for help. As several of you pointed out the FRS/GMRS handhelds are simplex so a repeater is of no use. Thanks to those that responded John, K4AG

[Repeater-Builder] Re: D-Star (Protocol and Repeaters)

--- In Repeater-Builder@yahoogroups.com, Nate Duehr wrote: > > > I like D-STAR as a not-very-well-designed "first try" and use it... but it's > seriously technologically flawed. Some of that can be fixed... other things > like the header information not being interlaced... > > -- > Nate Dueh

[Repeater-Builder] Re: D-Star (Protocol and Repeaters)

--- In Repeater-Builder@yahoogroups.com, MCH wrote: > > Threaded... > > John wrote: > > > > Hmmm... I'm sitting here with my NQMHS Node Adapter (GMSK Modem) and > > watching the binary stream, in both Hex and Char, off of my IC-91AD, while > > tran

Re: [Repeater-Builder] Problems reaching the RB website

Repeater-Builder site works fine under Netscape 7.0, no problems John Wayne Leake wrote: I tried accessing http://repeater-builders.com/ and http://www.repeater-bulders.com/ with the latest IE under win XP, and had no problem Firefox and K-Melon both take me to a web page that suggests

[Repeater-Builder] Xtals for Mastr ExecII

Well it looks like I need a new tx xtal for my UHF ExecII repeater. The current xtal has suddenly jumped about 50KHz high on UHF What are the current prefered vendors? I know about International, any other reliable ones? John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National

Re: [Repeater-Builder] Xtals for Mastr ExecII

at 4volts. When I short it to ground I can get the tx back on freq but then the rx is off freq. I cleaned the contacts and even put the xtal into another ICOM, same story. So I will try to pad the capacitor with a few pf John

[Repeater-Builder] Re: Verizon Tarif

(Amateur Radio, not LMR) > -- John, K7VE

[Repeater-Builder] Motorola Spectra

I'm trying to find out the spec's on a model# TA9FW+079W. Contact me of line at kc...@cox.net John

[Repeater-Builder] Astron RS50 regulator board

-mail direct to k...@arrl.net 73 John K2QY

[Repeater-Builder] Re: Harmful Taxing

--- In Repeater-Builder@yahoogroups.com, Scott Zimmerman wrote: Remember: For every law that is passed there is one less freedom we will NEVER get back!! There is a movement in this country (the US) that is anti-law and anti-government which creates such slogans without thinking them through to t

[Repeater-Builder] Converting the Kenwood TKR-820 to use with D-STAR

My conversion project is at: http://k7ve.org/blog/2010/06/converting-the-kenwood-tkr-820-to-use-with-d-star/ 73 de K7VE

[Repeater-Builder] Re: Converting the Kenwood TKR-820 to use with D-STAR

--- In Repeater-Builder@yahoogroups.com, "Mark" wrote: > > John, > > I currently am Trustee for a TKR-820 operating on 444.5500. I wonder - is > this conversion "dual-mode" capable, meaning, can it be accessed BOTH via > D-STAR and analog radios, or doe

[Repeater-Builder] Re: Converting the Kenwood TKR-820 to use with D-STAR

--- In Repeater-Builder@yahoogroups.com, Mike Morris wrote: > > The biggest problem with multimode systems you describe (including > the quantar) is that you have two separate user pools on a single box > on a single channel. The DStar users don't have any idea of what is > happening on the co

[Repeater-Builder] Re: Converting the Kenwood TKR-820 to use with D-STAR

Some of the concerns are addressed in this posting: Basically, D-STAR is by far the most developed and deployed Amateur Radio specific true digital voice and data network out there (We see a few P25, MotoTrbo, and NXDN/IDas systems o

[Repeater-Builder] Re: Converting the Kenwood TKR-820 to use with D-STAR

--- In Repeater-Builder@yahoogroups.com, "Mark" wrote: > > Thanks to everyone for the replies. It appears that, at least for now, I > think I'll leave well enough alone. > > The reason I was considering a "dual-mode" system is that another local > repeater (a Quantar) operates in that manner o

[Repeater-Builder] Re: Converting the Kenwood TKR-820 to use with D-STAR

--- In Repeater-Builder@yahoogroups.com, "nj902" wrote: > D-Star may trudge on much like LaserDisk did - Pioneer was pretty much the > only one backing it just as D-Star has one major backer. > You mean like MotoTrbo? :) BTW - there is a lot more going on in D-STAR and you will probably

[Repeater-Builder] Re: Repeater Control Operator via Other-Than-Phone-Line

--- In Repeater-Builder@yahoogroups.com, "kb9mwr" wrote: > > If you are most familiar controlling over the phone. You might want to > consider an analog telephone adapter (ATA), like the Linksys PAP2T. > > It's a little box that converts the standard telephone RJ-11 to ethernet. > From ther

[Repeater-Builder] adding a 3/4meter repeater to my site?

save a chunk of change ;-) Of course I'll need seperate cavities and /or duplexer. Thanks, John K2QY

Re: OT Re: [Repeater-Builder] DOSBox to Program Radios

What's the name of that little jewel Thanks, John skipp025 wrote: I don't even bother to slow my fast laptop down when programming old radios (Syntors, etc). But some software only works well when you disable the processor internal cache, which I do with a simple (free) utility.

Re: [Repeater-Builder] (unknown)

Including all the different site keys John Doug Dickinson wrote: The CH751 key is a generic cabinet key used by many manufacturers including Square D, Soundolier, and other non-radio manufacturers. The 2135 and 2553 are pure Motorola, reserved by Chicago Lock (the manufacturer) for only

Re: [Repeater-Builder] SIMPLEX software

Yes, I have used it when I need a simplex station John, K4AG gabriel wrote: >Hello >Just for stats, does anyone use the SIMPLEX software by F6DQM to manage its >repeater ? >Gab >

[Repeater-Builder] Wanted 156.7 Hz Vibrasponder

Hello Group, I need a 156.7 Hz Motorola Vibrasponder (receiver reed) for a Micor board that I have. Please give me your price shipped to 38351 if you have one you can spare. Thanks. 73, John, K9KA

Re: [Repeater-Builder] Re: UHF Radio recommendations ??

John, I use one at 442.150/447.150 with no problem John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org John Barrett wrote: >I've had some off-list replies from others who have used the 820 >

[Repeater-Builder] Polaris Industries PAII progamming box

Hi, I have posted this on another group but I know there is a vast amount of knowledge on this group. Does anyone have a Polaris Industries PA II box. Please email off the list as I need some info on howit should operate and the cable connections for it Thanks, John

Re: [Repeater-Builder] Polaris Industries PAII progamming box

Eric, thanks for the info John Eric Lemmon wrote: >John, > >Have you contacted Polaris Tech Support for assistance in using their >product? The fellow I spoke with was extremely knowledgeable about my >issue, and he solved the problem in just a few minutes on the phone. It

[Repeater-Builder] ICOM FR-3000 / FR-4000 repeater

tion but doesn't seem to have what I am looking for. Is there a detailed service manual for these? Does someone have a copy they can send me? I tried contacting Icom but the systems people were not available to offer any assistance. Thanks in advance, John Liguori Sparta Twp NJ

[Repeater-Builder] Re: ICOM FR-3000 / FR-4000 repeater

. Thanks again everyone for all your help. John Liguori Sparta, NJ --- In Repeater-Builder@yahoogroups.com, "Milt" <[EMAIL PROTECTED]> wrote: > > John, > > General setup, I'm not directly familure with this unit. > > The Icom needs to operate as a

Re: [Repeater-Builder] Re: Sunday at Dayton - Part Deux

That is a French word using an English dictionary! Hi, Hi! It means two in French. Pronounced like duh but more like deuh. John KU4RW - Original Message - From: ka9qjg To: Repeater-Builder@yahoogroups.com Sent: Tuesday, May 20, 2008 4:14 PM Subject: RE: [Repeater-Builder

[Repeater-Builder] slightly OT GE Mstr PA

John KE7AYV Sheridan, WY Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: htt

[Repeater-Builder] 450 Delta S (Mastr Delta) Crystal Control

use to do this job. Any help will be appreciated. 73, John, K9KA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your us

[Repeater-Builder] Midland Community Tone Panel

t has main power, ground and aux. power, ground.) But, the PCB is different. There are no model numbers or other identification. This was made by Communication Systems Inc. circa 1987. Any help would be greatly appreciated. Thank you John KE7AYV Sheridan, WY Yahoo! Groups Links <*> To

[Repeater-Builder] Re: Midland Community Tone Panel

e,but, different pc board layout. Thanks, I guess I'll just keep looking. 73's John --- In Repeater-Builder@yahoogroups.com, Neil McKie <[EMAIL PROTECTED]> wrote: > > Did you try contacting CSI? > > Neil > > John wrote: > > > > I am looking for a

[Repeater-Builder] Re: Midland Community Tone Panel

Thanks again John --- In Repeater-Builder@yahoogroups.com, "Paul Finch" <[EMAIL PROTECTED]> wrote: > John, > > OK, found my book. You have 5 seconds to enter the programming code which > is "35687". The panel is disabled. To exit the programming mode pr

[Repeater-Builder] UHF Micor Mobile Exciter Questions

Standard and Widespaced?? Thanks. 73, John, K9KA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Gr

[Repeater-Builder] UHF Micor LLA assy. number??

Hello out there, Can someone give me the assembly number for a 450-470 Mhz Micor LLA?? I think I have found one, but want to be sure before sending my money. Thanks. 73, John, K9KA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com

[Repeater-Builder] Micor 186.2 Hz PL Reeds Wanted

Does anyone out there have one sponder (TLN8381A) and one sender (KLN6210A) for 186.2 HZ (7Z) that they will sell?? If so send me the shipped price to 38351. Thanks. 73, John, K9KA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com

[Repeater-Builder] Re: UHF Micor LLA assy. number??

Sorry, it is for a Mobile. John --- In Repeater-Builder@yahoogroups.com, Kevin Custer <[EMAIL PROTECTED]> wrote: > Station or Mobile? > > John wrote: > > >Hello out there, > > > >Can someone give me the assembly number for a 450-470 Mhz Micor > >LL

[Repeater-Builder] Re: Controler Question

Bob, if you really want to go low cost, you can wire a simple transistor switch from the unsquelch indicator of one radio to the PTT of the other and use one of the $8 K1EL CW ID chips to keep you legal. 73, John, K9KA --- In Repeater-Builder@yahoogroups.com, "Bob" <[EM

[Repeater-Builder] UHF Micor Duplex Question

I'm duplexing a UHF Micor mobile and can't seem to locate JU-905 on the control board. Can someone tell me what is connects to or where to find it?? Thanks. 73, John, K9KA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.co

Re: [Repeater-Builder] Standard Crystal Corp.?

On the off chance does anyone have a xtal or icom for Mastr ExecII radio on 449.600 receive. If so please reply off list with details and price Thanks John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] Mobile Duplexer

Anyone have any info on a Phelps Dodge mobile duplexer model 638-509. It has 4 cans, 2 for tx and 2 for rx. Are they Bp, Br or what? Any data would help Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org

[Repeater-Builder] UHF Micor Mobile PA Question

out of a 100 watt Micor on 442.95 Mhz?? Thanks for any info you can give. 73, John, k9KA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMA

Re: Fwd: Re: [Repeater-Builder] Re: Motorola Repeater DC Power Plugs

s setup to properly cycle/condition the batteries, not just float them... I'm still learning about subject though. I already have an anderson power pole connector for this too. See comments below.. >--- In Repeater-Builder@yahoogroups.com, Eric Lemmon <[EMAIL PROTECTED]> >wrote: &

Re: [Repeater-Builder] DTMF generator for computer

send other commands. >> Mike, What other commands do you mean? I use TimeCat to program 5K, 7K and NHRC controllers and it works great. What's nice is that it gives you a few seconds warning to hit the PTT I go to test and clear out the Unlock, Test Invocing Code and Lock boxes and

RE: [Repeater-Builder] Z matcher info.pdf

Try the EMR spec sheet.  http://www.emrcorp.com/catalog/FullLine/HARDWARE/accessories/HW_FILT_LINEMATCH_LOAD.pdf   John   KU4RW   From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, January 24, 2006 12:08 PM To

[Repeater-Builder] VHF GE power amp

Hi, I'm looking for an LBI for a GE P3AK6AG. I think it is LBI 30836 is that correct? Anyone have a pdf copy of it? Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org Yahoo! Groups Links &

[Repeater-Builder] db duplexer

Hi, Does anyone have or knows where to find the info on a DB 4072 UHF duplexer? What's the best way to tune one using a simple service monitor? Thanks, John, K4AG Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Build

Re: [Repeater-Builder] Re: db duplexer

Thanks, that's just what I needed John, K4AG na6df wrote: >Basic sheet on the website... >http://www.repeater-builder.com/db/db-4055-56-67-68-71-72-high-band- >uhf-duplexers-installation-and-tuning-instructions.pdf > > > -- John Mc Hugh, K4AG Coordinator for A

[Repeater-Builder] Re: Kenwood TKR 820

ating this. What are the mike connections. How do I make it tx so I can find out the tx/rx freq There is no audio out even on unsquelch Thanks, John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org Yahoo! Groups

Re: [Repeater-Builder] Re: Kenwood TKR 820

looks like pin 8 on the molex is PTT, how is the pin numbered? What does the controller look like and where in the radio would it be located? Would it be needed if an external ham controller was used like one from NHRC? If it has been removed would the unit still repeat? Thanks for your offer

Re: [Repeater-Builder] Re: Kenwood TKR 820

ndout more about it if you can help me John Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is su

Re: [Repeater-Builder] Re: Kenwood TKR 820

DCFluX wrote: >http://groups.yahoo.com/group/Repeater-Builder/message/57016 > Thanks, I overlooked that one John, K4AG Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this gr

Re: [Repeater-Builder] EEproms Phoenix Radios

udio.com/kg4lne/geflash.asp I built mine from the info on Marks pages John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yah

Re: [Repeater-Builder] Re: Kenwood TKR 820

Hi Skipp skipp025 wrote: >ps: The rear panel molex connectors and required >pins are common to find... > Do you have a part # for the plug and the male pins? What do you sell them for? John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC

Re: [Repeater-Builder] Wanted Wanted Wanted

Try http://www.radiostew.com/index.php John, K4AG Bob wrote: >Need rib-box cable to program a Motorola HT-600 anyone got this >forsale ? >Yes i heard about Ebay but i dont buy any thing from ebay! > >Bobby/N2BR email [EMAIL PROTECTED] > > -- John Mc Hugh, K4AG Co

Re: [Repeater-Builder] OT; Evidence of first male engineer

Anyone have any info on a Motorola module MHW561? Supply volts, bandwidth, etc. Thanks, John, K4AG

[Repeater-Builder] Motorola Module

Sorry about the first post, didn't check the subject line John wrote: >Anyone have any info on a Motorola module MHW561? Supply volts, >bandwidth, etc. > >Thanks, > >John, K4AG > >

[Repeater-Builder] Re: Programming software for the RADIUS and MAXTRAC100

S AT 7PMCST ON REPEATER ABOVE > AND ECHOLINK NODE#28689 Hello Tommie, You need to join the Yahoo "Radio Programming" group. There is a web address for a Russian website with what you need. Good Luck. 73, John, K9KA Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Repeater-Builder] Solving PLL Lock Problems with GE Ranger & Delta Radios

Once you get lock on both TX and RX across your desired range, you can re-program the X2212 for the 16 desired frequencies and begin using your new radio. Good Luck. 73, John, K9KA Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Bui

[Repeater-Builder] Mitrek Radio Problem

. I grounded the channel 1 elements, too. I do not have a listing of the metering plug pinouts, so if anyone can give me a list, that would help. But, it seems like there is something like a jumper missing to make the radio work?? Does anyone have any ideas?? Thanks. 73, John,

[Repeater-Builder] Re: Dayton Hamfest Notes

at meeting everyone and I look forward to next year. Even with the flight delays, I didn't miss any of the Hamvention. John K6SJH Pleasanton, CA --- In Repeater-Builder@yahoogroups.com, "skipp025" <[EMAIL PROTECTED]> wrote: > Back from Dayton with the obligatory cold from the

[Repeater-Builder] Ericsson DRC-200 VCO Lock?

Has anyone had experience moving a DRC-200 (450-470) to the 440 Ham Band? It looks like the VCO won't lock at 441 MHz John K6SJH Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from

Re: [Repeater-Builder] Effects of doubling RF output on UHF repeater?

double the power is a 3DB increase, which will result in 1/2 S-unit increase in signal. There will be very little, if any, difference. Unless you can do the upgrade for free, it is not worth it. -- Original Message -- Received: Mon, 05 Feb 2007 08:47:45 AM CST From: "Tony L." <[EMAIL PRO

[Repeater-Builder] Where to send Cushman service monitors for repair?

I've for a Cushman service monitor I need to send for repair. Can anyone recommend where to go these days?

Re: [Repeater-Builder] Solar Power Charge Controller Report

mountaintops would be outside this range as well. I have never understood why a Canadian company would design such a beastgo figure... 73, John WØDP Ames, Iowa - Original Message - From: skipp025 To: Repeater-Builder@yahoogroups.com Sent: Thursday, February 15, 2007 2:33 PM

  1   2   3   4   5   6   7   8   9   10   >