Title: Re: [Samba] Configure Sambe 2.2.6 - installing on HPUX 11.11
Hey TB,
I had the same problem on one of our HP-UX systems. I got this error and also a lot of different other error which i couldn't make out.
Which kind of compiler u have u got installed??
I solved the problem by buying
On Wed, Nov 20, 2002 at 05:17:18PM +, Giuseppe Torelli wrote:
Alle 14:23, mercoledì 20 novembre 2002, hai scritto:
ok: smbclient -L hostname -U username -W DomainNameOrWorkgroupName
to list the shares of the smb server
smbclient //hostname/sharename -U username -W
On Wednesday, Nov 20, 2002, at 22:24 Australia/Adelaide, xfesty wrote:
Is it possible to share profiles between different users with Samba
3.0CVS acting as a PDC, and XP Workstations?
All users are using the same profile share; the concept is that
there's an Admin user which can read/write
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Message: 12
Date: Thu, 21 Nov 2002 10:36:18 +1100
From: xfesty [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Samba] Re: Shared profiles under XP?
Hi...
Isn't this possible?
I've gotten no replies...
R
On Wednesday, November 20,
You configure as user or as root?
Check your path to command used by configure...
- Original Message -
From: Ing. Thoralf Bihlo [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, November 21, 2002 8:27 AM
Subject: [Samba] Configure Sambe 2.2.6 - installing on HPUX 11.11
hi!
Hello,
[...snip...]
That's itrebooted a few times, tried to connect from my PC using IE but
can't. I have another Samba server but it's running SlackWare and uses
inetd so the configuration differs :-( I get to that one OK using IE/Swat
[...snip...]
You say you try to connect from the
Hi,
Roger J Schwartz wrote:
Can samba trust other domains? I am very interested implementing a samba
server but need to trust other w2k domains.
can't let that interest run into void :-)
Have not done this myself, but man smb.conf says samba will trust by
default, as a member of domain that
SUBJECT: [samba]Error join NT domain
when I join NT domain by the command :smbpasswd -j DTWX -slaver,Then the results show as followed
[root@root]#smbpasswd -j DTWX -slaver
cli_nt auth2 :Error NT_STATUS_NO_TRUST_SAM_ACCOUNT
Failed to change passwd f or domain DTWX
Unable to join domain DTWX
On Thu, Nov 21, 2002 at 10:35:43AM +0100, Dan Am wrote:
Hello People,
(new to the list). I have Samba 3.0 alpha-latest and I configured ldapsam,
which I did before succesfully with 2.2.3a. testparm runs ok. daemons start
ok, but on smbpasswd -a user I get ldap not detected at configure
hi!
i've got a problem with samba 2.2.6 to access files.
samba is running on a hpux 11.11.
the server is not integrated in a domain. when i try to access files
directly via explorer etc. no problem at all.
when i try to access files via a nutcracker-shell from a pc that is in a
domain (but the
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, November 19, 2002 10:47 PM
Subject: Please no HTML email.
Hi all,
FYI, just a warning/note. I read my email on mutt from samba.org.
When I get an html formatted email I just hit
Hy there,
I just installed samba 2.2.7 but still have some troubles installing
printer drivers.
If log on as printer admin and install a printer driver for Win2000.
In the settings tab I change the device setting, e.g. Printer Memory,
Installed Paper trays and so on.
If I then log on as
// sorry for x-postings with smb-client
Dear list,
for days and weeks, now, I am fighting to add our W2k clients to
our
domain. The previously NT4 server was replaced by Samba 2.2.2,
and this is a list of what I tried so far:
- re-create machine accounts
- enable plain passwords in w2k
Hello.
when i type smbpasswd -j centroadm
fetch_domain_sid: machine PMF rejected the tconX on the IPC$ share.
Error was : NT_STATUS_ACCESS_DENIED.
Failed to get domain SID. Unable to join domain CENTROADM.
i have 3 nic on linux box an 3 on w2k pdc.
what is the problem???
thanks
WILSON
This is my
On Thu, Nov 21, 2002 at 02:05:26PM +0100, [EMAIL PROTECTED] wrote:
// sorry for x-postings with smb-client
Dear list,
for days and weeks, now, I am fighting to add our W2k clients to
our
domain. The previously NT4 server was replaced by Samba 2.2.2,
and this is a list of what I tried
hallo,
please help!!!
i have a running system with samba 2.2.7 and opnldap running as pdc. it
works for weeks very good ( little performance problems with win xp )
since today same user can't login anymore. i change nothing to the
system. the user, whitch can't login, get the message rpc
when i restart smb service smb restart
shutting down smb services..ok
shutting down nmb services./etc/init.d/smb: line 201: kill:
(1016) - no such process
/etc/init.d/smb line201: kill: (999) - no such process
starting smb servicesok
starting nmb servicesok
- Original Message -
From: Wilson A. Galafassi Jr. [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Thursday, November 21, 2002 1:07 PM
Subject: [Samba] winbind is my enemy :) hehehe
Hello.
when i type smbpasswd -j centroadm
fetch_domain_sid: machine PMF rejected the
Hi all,
I've looked through the archives and I can't seem to find a solution, so
here's my problem.
I have three Win2k clients and one Samba server which I set up as a PDC
(or at least I thought so.)
The domain is THEMOLE yet when I try to join the domain from the
clients it says;
The
Sorry for all the newbie questions...
I could have sworn I saw something about a utility that exports the SAM
database from NT into Linux..
seems like it is the lego syndrome, saw it while doing WINBIND searches,
can't find it elsewise...anyway...could someone point me in the right
direction?
I
Hi. after 2 days of looking, checking and rechecking I've just found that I
made a mistake in the swat file I'd created in xinetd.d ... got the path to
swat wrong. What a fool am I. All's working brilliantly now.
Thanks to all for your assistance... sorry it was my mistake.
Mike
--
To
On November 21, [EMAIL PROTECTED] said:
Sorry for all the newbie questions...
I could have sworn I saw something about a utility that exports the SAM
database from NT into Linux..
seems like it is the lego syndrome, saw it while doing WINBIND searches,
can't find it
Mike,
Connect to swat from the Samba machine using the Linux browser, not
across your network.
On the samba PC, start Mozilla or whatever you use, then go to
http://localhost:901
and see if you get better results.
It's possible that you have a firewall blocking port 901. Make sure
All,
I just upgraded our SAMBA install from a very ancient version
(2.0.something) to 2.2.7. Everything is working properly, it seems,
except for connecting to home directories on the server. We have the
default [homes] section in place in our smb.conf file:
[homes]
comment = Home
Hi,
I still have the problem of Out of connection structures with Samba
2.2.6 or 2.2.7 and TSE clients.
This problem was encountered by Richard van Beers :
From: richard van beers
To: [EMAIL PROTECTED] (Jeremy Allison), Gunther Hess
Subject: Re: Samba and Out Of Connection
On Thu, Nov 21, 2002 at 02:30:05PM +, [EMAIL PROTECTED] wrote:
Hi all,
I've looked through the archives and I can't seem to find a solution, so
here's my problem.
I have three Win2k clients and one Samba server which I set up as a PDC
(or at least I thought so.)
The domain is
Try specifying the administrator account when joining.
Joining without specifying the administrator account requires the
computer account first to be created in the domain. Not sure if this
works very well with W2K or later domain controllers.
Regards
Henrik
tor 2002-11-21 klockan 14.07 skrev
Hi all!
I've got a Linux samba server and win 95/98 clients without problems.
I've just installed 2 windows 2000 clients and I have a problem with one of
them.
One of w2000 works fine, and it logs on samba domain, but the other it
doesn't log on.
The account of this machine was created , but
Title: samba 2.2.2 versus windows2000 service pack 3
Hi,
I would like know if Windows 2000 professional with service pack 3 and the last updade of windowsupdate.microsoft.com
work (and work very well !!!) with samba 2.2.2.
I would like know , too, if exist a new version of samba more
I am on Solaris 8 with Samba 2.2.4. When I configure a printer it sets
'oplocks = No' in the printer share. When I run testparm it then gives me
an error message;
Invalid combination of parameters for service insp0101. Level II oplocks
can only be set if oplocks are also set.
The dump shows
Not much to do with Samba
but did you start the Webmin service? 'service webmin start'
-Original Message-
From: Jean-Jacques Antille [mailto:[EMAIL PROTECTED]]
Sent: 21 November 2002 15:37
To: [EMAIL PROTECTED]
Subject: [Samba] webmin
Hello!
Sorry for my English!
I should like
this is because you are using Samba as your wins server and two instances of
nmbd are started. when you run the shutdown script it doesn't find the
second one cleanly - perhaps because another one is respawned as the first
is killed? if you run the shutdown a second time it kills the final nmbd.
Title: samba 2.2.2 versus windows2000 service pack 3
I
would use 2.2.7 - much more stable than 2.2.2.
I have
SP3 Win 2000 running with no problems. However I have stayed away from any
M$ auto updates so have to take your chances with that.
Noel
-Original Message-From: SALOME
Thanks for those utiltiies...I knew i saw them somewhere...I was successful
in creating a smbpasswd file using the pwdump utility..
Now here is my question (maybe someone know a work around):
If a username/password pair exists in the smbpasswd file...is there a way
that the corresponding
On November 21, [EMAIL PROTECTED] said:
Thanks for those utiltiies...I knew i saw them somewhere...I was successful
in creating a smbpasswd file using the pwdump utility..
Now here is my question (maybe someone know a work around):
If a username/password pair exists in the smbpasswd
Thanks. I looked at the vetofiles settings and they appear allright.
Actually, the problem disappeared when I restarted the samba server (which
is a little unnerving). While I'm glad the problem is gone (and now am
convinced that it is a bug in samba somewhere, since nothing else
changed), I
This is what I have tried with thier respective outcomes:
1. no local or samba accounts - strictly use winbind to authenticate off NT
PDC
AUTHENTICATION SUCCESS
2. export NT passwords using pwdump move that to the linux box changing
permissions and group to 600 and root, create local
Hello,
My commandline looks like this:
rpcclient localhost -d4 -c 'adddriver Windows NT x86
HPLJ4050:PSCRIPT5.DLL:HPLJ4050.PPD:PS5UI.DLL:PSCRIPT.HLP:NULL:RAW:PSCRIPT.NTF,PSCRPTFE.NTF'
The output is:
Serverzone is -3600
Initialising global parameters
params.c:pm_process() - Processing
- Forwarded message from huxin [EMAIL PROTECTED] -
From: huxin [EMAIL PROTECTED]
Subject: some question about chinese character support
Date: Thu, 21 Nov 2002 11:55:27 +0800
To: [EMAIL PROTECTED]
X-Mailer: Microsoft Outlook Express 6.00.2600.
When I want to visit windows chinese
On Donnerstag, 21. November 2002 18:40, Bernd Strieder wrote:
Hello,
What am I doing wrong?
Probably the version? Samba 2.2.5, cups 1.1.15.
I wonder, why google didn't find anything in the samba mailing list archives.
Bernd Strieder
--
To unsubscribe from this list go to the following
Hello,
I had problem with %U in include tag in configuration file smb.conf.
I try explain the problem. When I connecting from Windows (domain)
the samba server doesn't properly include file.
E.g.: smb.conf
include = smb.conf.%U
It include only smb.conf. at first time.
I find no information
Hi,
I use version 2.2.2 of Samba on Solaris 8 and I have the following problem:
From a working station which uses a connection modem (56 kbps) towards the
server to reach to a network drive and with the following configuration
under smb.conf:
[dgui]
comment = mir:/grp/in4mix/DGUI
Hi All,
I have a new samba configuration (2.2.6 FreeBSD 4.7), and the machine has dual
NICs, one is for the student network, the other is for the staff. They're
both working fine except for one major pain.
In Network Neighborhood, they can see each other. It doesn't appear that
they are able
You should try to run
smbpasswd -j DTWX -r slaver -U administrator
It will prompt for the NT domain's administrator's password. You can also
use any username who is in the domain admins group in your domain. This is
a much cleaner way to join than using smbpasswd without username and
Title: is this is a problem?
Hi,
this is a ploblem? (of /usr/local/samba/lib/var/log/log.xx)
2002/11/21 17:41:02, 0] smbd/nttrans.c:(1762)
call_nt_transact_ioctl: Currently not implemented.
2002/11/21 17:41:06, 0] smbd/reply.c:(888)
restrict anonymous is True and anonymous connection
For over a year now we have used SAMBA to give Win9x access to our RH Linux
7.x fileserver. Our office is small and we like to keep things simple so we
went with plain authentication.
If we login we can get on to the fileserver, access shares and our 'home'
accounts that we created. If we type
On Thu, 2002-11-21 at 05:38, Bill Dossett wrote:
:-( grump grump grump... is there any
way to get NT to authenticate against
samba? Unfortunately I've got SQL server
running and we can't migrate to MYSQL
yet for a while... I'm just trying to
avoid keeping two servers in sync with
accounts
Hi, mbp:
I am runing Samba in RetHat 7.3, and How to take the new changed smb.conf file
into operation, if I don't restart Samba by /etc/rc3.d/S91smb restart.
For example, I have set a machine in hosts deny field. and now I remove the
machine form the field, and I still can't
Hi,
Have you tried the Interface option in the smb.conf?
That's how I keep Samba from broadcasting to the Internet on my
Router/FTP server that is running Samba to upload files to the FTP
folders from the LAN. I set the line to only look at the Internal IP
subnet and things are fine.
In my research, I read that Samba 2.2.5-10 would work fine with Windows
2000 SP1, SP2 and SP3, as well as Windows XP Professional (No word on SP1
for WinXP) I am unable to say anything about previous versions of Samba.
Regards,
Robert Adkins II
IT Manager/Buyer
Impel Industries,
Had the same problems: from samba (debian) to win - fast, reverse very
slow.
But the same effect happends with other protocols (nfs, ftp).
It was the network card. The autonegotiation at startup was not correct.
Try to reset or configure the nic with the mii-tool
I have only read that Samba is able to act as a BDC for another Samba PDC
system. It is unable to act as a BDC for a Windows PDC due to the
secreted method that Microsoft uses to transfer the SAM data to other
Domain Controllers.
Regards,
Robert Adkins II
IT Manager/Buyer
Impel
Ralf,
I am using Samba 2.2.5-10 and haven't had any issues with getting Win2K
clients to connect to the domain after getting Samba properly configured
as a PDC. It could be a minor configuration issue. Although, in my
reading I could only get confirmation that Samba 2.2.5-x would
On Fri, 2002-11-22 at 07:42, SALOME Alexandre wrote:
Hi,
this is a ploblem? (of /usr/local/samba/lib/var/log/log.xx)
2002/11/21 17:41:02, 0] smbd/nttrans.c:(1762)
call_nt_transact_ioctl: Currently not implemented.
2002/11/21 17:41:06, 0] smbd/reply.c:(888)
restrict anonymous is
On Fri, 2002-11-22 at 02:55, kyle netix wrote:
Hi all!
I've got a Linux samba server and win 95/98 clients without problems.
I've just installed 2 windows 2000 clients and I have a problem with one of
them.
One of w2000 works fine, and it logs on samba domain, but the other it
doesn't
Hi-
I am experiencing some odd behavior with ACLs with winbindd using Samba 2.6
on Debian Woody (kernel version 2.4.18).
1. I am unable to alter permissions from Win2K clients using the
Properties-Security interface. Is this normal? I get the Unable to save
Permission Changes on new Folder.
I ran into a similar problem with one of my machines. I simply couldn't
quite understand why it happened. I did destroy and recreate the machine
account and it still persisted.
I ended up changing the machine name and creating a new machine name for
the system. That is the only fix that
On Thu, 2002-11-21 at 10:02, Martin Rasp wrote:
Hi.
I'm developing a command line tool (a GUI is following) for easily sharing
local directories as an unprivileged user.
After adding shares smbd reloads its config file (via SIGHUP). Under Windows
new shares appear immediately. If
Pete,
My Samba server is setup with Samba 2.2.5-10, I am using a combination
of CLI, Webmin and SWAT for configuration. I accessed SWAT through Webmin
and in the SWAT help files there is a section entirely on making a Samba
BDC for a Samba PDC. (I believe that it is little more
Hi,
I have reciently been attempting to connect an OS\390
system to a windows file server using the smbclient
program that is part of the MVS port of samba.
The problem I have encountered is this. When I try to
connect from MVS to windows without a password I can
connect with no problem at
I am trying to work out a work around for this...I have used PWDUMP to
extract the NT SAM into a smbpasswd file.
Theoretically..one could write a script that would then parse that file and
run useradd -u RID to create the local accountsI have done it manually
and it works very well (there is
Dominic Saindon wrote:
Hi,
I use version 2.2.2 of Samba on Solaris 8 and I have the following problem:
From a working station which uses a connection modem (56 kbps) towards the
server to reach to a network drive and with the following configuration
under smb.conf:
[dgui]
comment =
i've got a problem with configuring and installing samba 2.2.6
i've got a hpux 10.20 running on a "I40" hp-risc based machine. when
i unzip and untar the installation-file and start configuring it with
"./configure --prefix=/usr/local/samba2"
i get the following output:
loading cache
Andrew:
Thanks for the heads up. As always, the support you guys give to an open
source product amazes me. We worked with Jeremy John
Terpstra a few years ago when there was a problem
with how AutoCAD was creating lock files (AutoCAD R14 running against
SAMBA 1.9.something; it ended up being a
Chris,
I believe the issue is relating more to the SID (Security IDs) that are
also transferred for both user and computers. I don't believe that
dumping the NT SAM into a smbpasswd file would really do the trick as it
wouldn't include the SID information. (Unless I am seriously
I tried this and when I ran the command 'wbinfo -A admin%passwd'
I got:
could not obtain winbind separator!
could not obtain winbind domain name!
Does anybody know what this means.
Thanks.
-Ben
On Thu, Nov 21, 2002 at 02:28:05PM -, Gareth Davies wrote:
- Original Message -
On Thu, 2002-11-21 at 10:02, Martin Rasp wrote:
I'm developing a command line tool (a GUI is following) for easily
sharing local directories as an unprivileged user.
After adding shares smbd reloads its config file (via SIGHUP). Under
Windows new shares appear immediately. If removing a
On Fri, 2002-11-22 at 01:57, Joseph Formoso wrote:
All,
I just upgraded our SAMBA install from a very ancient version
(2.0.something) to 2.2.7. Everything is working properly, it seems,
except for connecting to home directories on the server. We have the
default [homes] section in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 21 Nov 2002, Giles Carre wrote:
Hi,
I still have the problem of Out of connection structures with Samba
2.2.6 or 2.2.7 and TSE clients.
We did not change the default number of max connections per smbd.
You still need to modify the
On Fri, 2002-11-22 at 08:00, Andrew Bartlett wrote:
On Fri, 2002-11-22 at 07:42, SALOME Alexandre wrote:
Hi,
this is a ploblem? (of /usr/local/samba/lib/var/log/log.xx)
2002/11/21 17:41:02, 0] smbd/nttrans.c:(1762)
call_nt_transact_ioctl: Currently not implemented.
2002/11/21
I have created a NT4.0 domain utilizing Samba 3.0 a PDC, BDC, and member
server. While the machines appear to be running as advertised, a strange
thing is showing up. When using the MS server manager from a NT4.0
workstation on the domain, all three of the SAMBA machines only show up if
you select
On Fri, 2002-11-15 at 12:44, Yannick Mercier wrote:
Hi,
I am running 2.2.5 and I would like to know if the
restrict anonymous as been implemented correctly, as it was supposed
to behave from the start, in order to deny
ALL anonymous connections as stated in the man :
When restrict
Yes I have tried the newest alpha version
it works for the restrict anonymous thing
but unfortunately, a bug with it or with WinXP
( but I presume it is a bug in samba alpha because
my WinXP box works perfectly with the old samba )
makes that after authentication, when loading desktop settings
my
On Wed, 2002-11-20 at 20:12, Andrew Furey wrote:
Hi all,
I'm using the latest alpha version (the one that comes with Debian
unstable) in domain mode, setting up a member file server, with domain
clients authenticating to a W2k machine.
I'm trying to use the add user script option to
Hi all,
recently I asked for help with a problem Samba had to write files
(http://lists.samba.org/pipermail/samba/2002-November/085003.html,
http://lists.samba.org/pipermail/samba/2002-November/085083.html).
Since that hasn't solved, and since it occurs regardless of changes
of the smb.conf, I'd
Hello all,
I have a strange problem that I'd like advice on. Here I run
several samba servers as home directory and print servers for an NT 4.0 (sp6a)
domain. The domains relevant to this problem are CANNING and STUDENT.
The STUDENT domain trusts users in the CANNING domain.
My samba
i have redhat 8 up n running for quite a while, n i've tried samba
2.2.5/2.2.6 both. my problem here is i'm not able to browse the workgroup or
domain which the samba is setup as pdc. in fact this does happen in another
setup i did. this is the message i got when using windows explorer (win98)
to
Hi All,
I am currently in the middle of setting up a samba server to provide file
and print services within an NT Domain. I have samba 2.2.7 running on
redhat 8
I have a problem with the output of the getent command. The out put of this
command appears corrupted, and I am not sure if this is
Hi!
Sometimes I can't unmount shares, it sais device is busy.
But I checked, and no program uses files from there.
Usually the mounted shares does not even work (can't see/read them)
So I suspect, samba couldn't initaliazie the share.
Is there a way to force the unmounting ?
Thank you in
On Wed, 2002-11-20 at 07:51, Andrew Bartlett wrote:
On Wed, 2002-11-20 at 01:45, kirk johnson wrote:
AB = andrew bartlett
AB Both options are only in Samba 3.0. Run 'testparm', before you
wonder why an option doesn't work.
ah, now i understand what you meant by samba HEAD.
On Thu, 21 Nov 2002 16:07:08 -0500
Tom Hallewell [EMAIL PROTECTED] wrote:
1. I am unable to alter permissions from Win2K clients using the
Properties-Security interface. Is this normal? I get the Unable to
save Permission Changes on new Folder. Access is denied. message.
This occurs
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, November 19, 2002 10:47 PM
Subject: Please no HTML email.
Hi all,
FYI, just a warning/note. I read my email on mutt from samba.org.
When I get an html formatted email I just hit
hi there,
I had some troubles while configuring a samba printer. The host
component of the netbios resource name was longer than 15 bytes and my
smbclient (version 2.2.5) truncates the netbois host name at that
length.
Looking at rfc 1002 I have found a 64 byte limit for resource name, but
On Thu, 21 Nov 2002, Christopher R. Hertel wrote:
On Thu, Nov 21, 2002 at 03:17:05PM +0100, Paolo Abeni wrote:
hi there,
I had some troubles while configuring a samba printer. The host
component of the netbios resource name was longer than 15 bytes and my
smbclient (version 2.2.5)
On Fri, Nov 22, 2002 at 04:08:07AM +1030, Richard Sharpe wrote:
On Thu, 21 Nov 2002, Christopher R. Hertel wrote:
On Thu, Nov 21, 2002 at 03:17:05PM +0100, Paolo Abeni wrote:
hi there,
I had some troubles while configuring a samba printer. The host
component of the netbios
On Thu, 21 Nov 2002, Christopher R. Hertel wrote:
On Fri, Nov 22, 2002 at 04:08:07AM +1030, Richard Sharpe wrote:
On Thu, 21 Nov 2002, Christopher R. Hertel wrote:
On Thu, Nov 21, 2002 at 03:17:05PM +0100, Paolo Abeni wrote:
hi there,
I had some troubles while configuring a
I'm having a similar problem with 2.2.6 and Windows XP.
I opened ticket 25972.
Details Summary, see the ticket for complete info:
I have a directory with 166 files. If I run a ls | tee ~/t.1 | wc a couple
of times I get different number of files. I extracted the files that where
missing and
This patch contains:
- new namecache implementation
- new ip string list handling routines
- trustdom_cache implementation (libsmb/trustdom_cache.c)
- fix to establishing trust (ie. net rpc trustdom establish)
- small enhancement to rpcclient trustdom enumeration
- small extension to
Mimir,
Thanks for the patch!
A few comments:
- in ipstr_list_add you try to be too fancy. I suspect the chunking
stuff is to try to second guess the malloc implementation and
allocate in bigger lumps? Don't do that unless there is good
profiling evidence to suggest that it is needed. It
On Fri, 2002-11-22 at 14:20, [EMAIL PROTECTED] wrote:
For some reason I have to develop a CIFS server on our PDA( frankly it is a
Pocket PC 2002):
I want to run this server on raw TCP/IP at port 445,I want this server to have
the following
Function:
1 It can announce itself in
Date: Thu Nov 21 14:16:30 2002
Author: jerry
Update of /data/cvs/sambaweb
In directory dp.samba.org:/tmp/cvs-serv32213
Modified Files:
samba.html
Log Message:
changing link to 2.2.7 signatures for work around browser issues.
Revisions:
samba.html 1.163 = 1.164
Date: Thu Nov 21 22:55:17 2002
Author: tpot
Update of /data/cvs/samba/source/nsswitch
In directory dp.samba.org:/tmp/cvs-serv16036
Modified Files:
Tag: APPLIANCE_HEAD
wb_client.c
Log Message:
The lanman and nt passwords were reversed in the smbd_auth_crap function.
cr#1209
Date: Fri Nov 22 00:32:23 2002
Author: tpot
Update of /data/cvs/samba/docs/docbook/projdoc
In directory dp.samba.org:/tmp/cvs-serv25981/projdoc
Modified Files:
Tag: SAMBA_3_0
winbind.sgml security_level.sgml samba-doc.sgml
printer_driver2.sgml msdfs_setup.sgml
Date: Fri Nov 22 00:32:23 2002
Author: tpot
Update of /data/cvs/samba/docs/docbook/faq
In directory dp.samba.org:/tmp/cvs-serv25981/faq
Modified Files:
Tag: SAMBA_3_0
errors.sgml
Log Message:
Sync docbook directory with HEAD.
Sorry but there are way too many changes to track
Date: Fri Nov 22 00:32:24 2002
Author: tpot
Update of /data/cvs/samba/docs/docbook/devdoc
In directory dp.samba.org:/tmp/cvs-serv25981/devdoc
Modified Files:
Tag: SAMBA_3_0
unix-smb.sgml dev-doc.sgml
Added Files:
Tag: SAMBA_3_0
encryption.sgml
Log Message:
Sync
Date: Fri Nov 22 00:32:24 2002
Author: tpot
Update of /data/cvs/samba/docs/docbook
In directory dp.samba.org:/tmp/cvs-serv25981
Modified Files:
Tag: SAMBA_3_0
Makefile.in
Log Message:
Sync docbook directory with HEAD.
Sorry but there are way too many changes to track down all
Date: Fri Nov 22 12:12:23 2002
Author: mbp
Update of /data/cvs/samba/source/python
In directory dp.samba.org:/tmp/cvs-serv29880
Modified Files:
py_tdbpack.c
Log Message:
Add support for new 'F' format, which is a string in the default
codepage.
Revisions:
py_tdbpack.c
Date: Fri Nov 22 02:40:21 2002
Author: abartlet
Update of /data/cvs/samba/source/param
In directory dp.samba.org:/tmp/cvs-serv3640/source/param
Modified Files:
loadparm.c
Log Message:
Add support for 'restrict anonymous=2' and make the doco give a slight hint
as to what it now does
Date: Fri Nov 22 02:53:42 2002
Author: abartlet
Update of /home/cvs/samba/docs/docbook/manpages
In directory dp.samba.org:/tmp/cvs-serv4727/docs/docbook/manpages
Modified Files:
Tag: SAMBA_3_0
smb.conf.5.sgml
Log Message:
Restrict anonymous=2 support merged from HEAD
Date: Fri Nov 22 02:53:43 2002
Author: abartlet
Update of /home/cvs/samba/source/param
In directory dp.samba.org:/tmp/cvs-serv4727/source/param
Modified Files:
Tag: SAMBA_3_0
loadparm.c
Log Message:
Restrict anonymous=2 support merged from HEAD
Revisions:
loadparm.c
1 - 100 of 104 matches
Mail list logo