no local device mode for this printer. The local device mode (which is
created, when you enter the printer settings) allways overwrites the
default devicemode (which is provided by the samba server).
Bye,
Martin
--
Martin Zielinski[EMAIL PROTECTED
this:
!root = matt
lp = *
This is the easiest system I could imagine to make things work.
Bye,
Martin
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbHwww.seh.de
.
Bye,
Martin
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbHwww.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https
.
H. This does not show any memory leaks. Is this really
smbd that is eating memory? Did you check with top? You can
sort by memory usage by typing Oq in top.
Volker
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0
share?
thanks for your help
Pascal
Bye,
Martin
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbHwww.seh.de
--
To unsubscribe from this list go to the following URL
Clicking Ok gives me the properties, however those are in read-only mode.
Somebody help us here?
Regards
Peter
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbH
Professor, Computer Science
Washington State University Vancouver
[EMAIL PROTECTED]
http://ezekiel.vancouver.wsu.edu/~wayne
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbH
.
The problem is with the link between cups and samba. Can't seem to
figure or find out what is it, though.
Thanks in advance!
Daniel
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbH
for server signing that could not be
allowed in the entreprise.
thanks
best regards
Francis
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbHwww.seh.de
LaserJet 5200 PostScript
Anyone see this before?
Cheers,
Bill
--
Martin Zielinski[EMAIL PROTECTED]
Softwareentwicklung T +49 (0)521 94226 76
SEH Computertechnik GmbHwww.seh.de
--
To unsubscribe from this list go
Matthew Forrest schrieb:
On 12-Aug-08, at 9:45 AM, Martin Zielinski wrote:
Matthew,
The reason for the gui that is different from the local installation
is a missing registry value.
It's: PrinterDriverData\DocUiHideFlags REG_DWORD 01
I didn't succeed in copying the settings via
$(CXXFLAGS) $(INCPATH) -Fo @
$
{src}.cxx{}.obj::
$(CXX) -c $(CXXFLAGS) $(INCPATH) -Fo @
$
TARGET = ricoh.exe
OBJECTS = main.obj
$(TARGET) : $(OBJECTS)
$(LINK) @
$(LFLAGS) $(OBJECTS) $(LIBS)
all: $(TARGET)
main.obj: main.cxx
--
Martin Zielinski
Hello,
Just an update regarding Vista vs. Samba:
It appears, that the problem is, that the driver on the Samba server
does not contain any dependent files.
In this case, Samba returns an empty string in a DRIVER_INFO_3 response.
This behaviour is different to XP - and different to what the
YOU !!!
Paul Boutan
[...]
-Original Message-
From: Martin Zielinski [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 15, 2008 10:30 AM
To: Boutan, Paul R.
Cc: [EMAIL PROTECTED]
Subject: Re: [Samba] Vista problem, with ADS samba
--
To unsubscribe from this list go to the following URL
Hello,
does the problem also occur, when you add a new printer and assign a
driver to it? When you try to connect to the printer - do it as normal
user, so the printer is not automaticly published in the AD.
If yes, please try to set default devmode = No in the smb.conf and
see, what
Hello list,
perhaps someone can guide me, finding out what's going wrong in the
following scenario (Active Directory , Samba 3.0.20b same with 3.0.28a):
CHILD1.CONTOSO.COM -trusts- CONTOSO.COM -trusts-CHILD2.CONTOSO.COM
|| |
User:
Hello,
You can't use a print processor on a samba machine.
When using client-server printing with windows, the print processor is
executed on the server (Samba). Because this is not possible (it's a
windows program), the print processor on Samba is hard-wired to
winprint. This means no more
Hello Andreas,
this hasn't been fixed in the official releases, jet.
The problem and the solution has been reported earlier.
Look at:
http://lists.samba.org/archive/samba-technical/2007-September/055435.html
If you can compile the sources yourself, you can easily apply the fix to
3.0.38 by
Richard Chapman schrieb:
Adam Tauno Williams wrote:
Use client driver means something like completely
ignore the server side drivers and use a local one.
IMHO, a better interpretation of user client driver is it breaks
print serving and it shouldn't be used unless you explicitly know
Lacour schrieb:
On Wed, Jan 02, 2008 at 09:45:49AM -0800, Jeremy Allison wrote:
On Wed, Jan 02, 2008 at 08:52:46AM +0100, Martin Zielinski wrote:
Hello,
This is the result of asking cups for a comment and location string to
sync them between cups and samba.
I've allready asked the samba-team
Hello,
This is the result of asking cups for a comment and location string to
sync them between cups and samba.
I've allready asked the samba-team to replace it with a more general
approach but got no response until now.
As a workaround, please set the comment and location string of every
Hi Greg,
put the printing = sysv line *before* the print command = ... line
in your smb.conf file.
Bye,
Martin
Greg Saunders schrieb:
I use to have a working custom print command = in my smb.conf until an
upgrade to 3.0.28.
OS: Suse 10.2
Samba: 3.0.28
Cups: 1.2.7
relevant smb.conf
Hi,
I don't think, that the log line below is related to your problem.
You should give some more information. E.g. your smb.conf file and a
more detailed description, what upload fails means.
Bye,
Martin
Vickie L. Kidder schrieb:
While trying to upload printer drivers from Windows XP to
Hello,
I've seen several situations, that might match your problem:
- W32X86\3 is not writable for you (unlikely as you are able to install
drivers)
- There really exist drivers, which create the files in the temporary
directory, but mark them as non readable (sick)
- Your driver might
Hi,
there is currently no way to use the functionality of print processors
with samba - shared printers.
The reason lies in the way windows handles print processors that are
provided by servers. There is no way to let windows use them locally.
They *MUST* be executed on the server (normally
James Perry schrieb:
Hello all,
[...]
Hello James,
My problem is in trying to add additional printer ports. Maybe this
can't be done, or I have to find an alternate way of doing this. I have
2 HP LaserJet 5Si printers, both are network printers. I don't want to
have to install drivers
Ian schrieb:
Hi,
Anyone have any idea to the problem below? Sorry if its already been answered.
Cheers
Ian
On 9/11/07, Ian [EMAIL PROTECTED] wrote:
Hi,
I am trying to join my FreeBSD machine to an AD domain and keep
getting the following error when joining the domain using samba 3.0.24
:
Hello Herr Kaiser,
I really don't know, which part of the configuration or auto-header
generator is responsible - but I would assume, that linux/fs.h is
somehow included before sys/mount.h.
Perhaps it's a simple workaround to delete one of these include options
(maybe comment out
Hello,
Please make sure, you have
printing = cups
printcap name = cups
also in your smb.conf.
When you have added a printer with cups, you could either restart your
samba processes (/etc/init.d/samba restart - or something like that) or
send them a signal to re-read the configuration.
/kerberos.c:ads_kinit_password(227)
kerberos_kinit_password [EMAIL PROTECTED] failed: Response too
big for UDP, retry with TCP
Failed to join domain: NT_STATUS_PROTOCOL_UNREACHABLE
Any ideas?
Thanks,
Nejc
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH
, retry with TCP
[...]
Any ideas?
Thanks,
Nejc
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
to
find the solution online and in the documentation but nothing seems
right.
I would appreciate any help
Mateusz
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read
for the dNSHostName and the servicePrincipalName and than the ADS server
responses with an error.
~ Martin
Paolo Staboli schrieb:
I have same problem...
You have positive response ?
Paolo
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
] section all works fine. Errors disappear. The
device mode were created correctly.
Some issues: If the default value for this is option is NO why i need
to declare it?! I don't undestood. Can anyone to explain ?!
Bye!!
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH
with net rpc join, even while User Admin has
full rights on the domain)
Greetings
hansjörg
...
thor:/var/log/samba# cat /etc/krb5.conf
[libdefaults]
default_realm = DOMAIN.NAME
cheers, jerry
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH
processor
locally with remotly shared queues.
~ Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo
are the same machine?
Perhaps you could use an ip address in the krb5.conf.
Bye,
~ Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https
client schannel = no with no effect.
Thanks,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
an authentication or unix rights issue.
Otherwise you'll have to go further with more details.
Regards,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions
ok = yes
writable = yes
printer admin = LITEONIT.COM+Roland_deLepper
use client driver = yes
^^^
Please remove. BTW it's a global parameter, too.
Best Regards,
Roland de Lepper
--
[...]
Hope that helps.
Regards,
Martin
--
Martin Zielinski
is:
checking for __open64... yes
checking for creat64... yes
checking for prctl... yes
configure: error: cannot run test program while cross compiling
See `config.log' for more details.
[...]
Thanks,
Mitch Trope
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
).
Not sure if that helps though.
-stephen
[...]
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
to find out the
scope of it.
I have tried both Vista Beta 2 build 5384 and the final version.
I don't have access to any of the RC builds that came in between.
Both my beta and my final Vista fail to load Samba hosted printer drivers.
Pim
--
Martin Zielinski [EMAIL PROTECTED
to samba shared directories just fine.
Any ideas?
Pim
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo
Normally samba prints raw to cups. This means, cups does not touch the
files that come from your XP client - and so cups has nothing to do with
collating the pages.
As far as I understand it, windows drivers often (maybe allways?) use
the print processor for collating (as for other advanced
Peer-Joachim Koch schrieb:
Hi,
I want to replace an old samba 3.x print server (all the driver,
settings and so on).
How can I transfer all settings files an so an ?
Bye, Peer
1st. Copy the ntprinters.tdb, ntdrivers.tdb and ntforms.tdb to your new
server.
2nd. Copy the driver directory
Scott schrieb:
John Drescher wrote:
On 12/7/06, Scott [EMAIL PROTECTED] wrote:
Last night I upgraded my FC5 to samba-3.0.23c from 3.0.21b. As a
result I
can no longer browse shares on the samba server via
\\hostname\share\. I can, however, access everything as usual via
\\10.0.0.2\share\.
I don't know for shure, if this is related, but
when I use kerberos authentication, the username with spaces extracted
from the kerberos ticket contains backslash space instead of space
only (Domain\ User vs. Domain User). This happens in
libads/kerberos_verify.c. Then the user cannot become
Hello,
you tell nothing about the software you're using
(Samba version, cups ???, logs), so it's difficult to help you.
a) The paused printers may be paused by cups, if an error occurs.
If you're using cups, then check the logs and try to change the error
policy of your print queue.
b) GDI
Hello!
Failed jobs may stop the print queue under cups.
This reason can be a filter or backend.
Search the error_log for failed jobs.
cups 1.2.x privides a per-queue error policy parameter to control this
behaviour.
Bye,
Martin
Nicolas Schmitz schrieb:
Hi,
I use a Debian Sarge with samba
Hello,
I'd assume, that this has to do with your client or driver.
To say more, you should provide at least information about your client,
the samba version and the driver you are trying to upload.
bye,
Martin
Miche schrieb:
Hi all
I have configured samba as a PDC.
All works perfectly.
, groupname and everyone are un-checked even if I can access the
folders.
What did I do wrong? Shall I edit /etc/pam.d/login file as well? How?
[...]
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list
about what might cause this? Or a hint about
where to look further? I'm more than willing to provide more detailed
information.
Thanks in advance,
roel
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from
driver files.
Just an idea.
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
pretty sure it's Samba permissions.
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
seem to be working.
Thanks for the help,
Tom
Martin Zielinski wrote:
Jerry,
I'd really need your crystal ball sometimes!
Yes, Tom isn't part of a domain (security = user as default), so he
can't su to a SAVAGEPHP\administrator or so - and there is a use
client driver = yes in the [printers
of
which work; my /etc/samba/smbusers contains a line: 'root = Administrator'.
Configuration files are attached. If any other information is needed I
will gladly supply it.
Thank you.
Tom
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH
.
- Original Message -
From: Martin Zielinski [EMAIL PROTECTED]
To: Kirk B. Dice [EMAIL PROTECTED]
Cc: samba@lists.samba.org
Sent: Wednesday, April 12, 2006 2:02 AM
Subject: Re: [Samba] Printing to Samba printer causes application to abort
Hi!
Sounds like the NULL - devicemode problem.
Please set
code
If the description meets your existing problem, this might help.
(There was an earlier discussion with Gerald Carter about this topic -
this might be his code or merged with mine - I don't remember excactly)
Bye,
Martin
--
---
Bruno Gomes Pessanha
LPI Brasil
--
Martin Zielinski
of these packets...
I tried different samba versions - from 2.2.8 to 3.0.x. I did setup a
complete new printserver. Nothing helped.
Printserver:
OS: SuSE Linux 10.0
Samba version: 3.0.2
Client:
Windows XP, SP2
Any hints?
Markus
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH
= /var/log/samba/log.%m
max log size = 5
Ideas anyone? Thanks!
The access denied error message doesn't explain too much. Several
errors result in this message.
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
Director
Prestige Telecom
575 Morgan Blvd, Baie d'Urfe, Quebec, H9X 3T6
Tel (514) 457-4488 x269
Fax (514) 457-4517
Cel (514) 409-5882
Email: [EMAIL PROTECTED]
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from
to any 3.0.20 or 3.0.21 release.
cheers, jerry
[...]
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo
Hello list!
On all my samba installations (3.0.20b) I can delete all unused printer
drivers with rpcclient regardless which user name or password i use.
Is this a general feature or might it depend on my settings?
Thanks,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software
Gerald (Jerry) Carter wrote:
Martin Zielinski wrote:
[...]
2nd, (and the true reason) - the add printer command is not really
functional without port handling.
E.g. CUPS wants a device uri like socket://192.168.3.100:9100 to know
the destination of the printjob.
You could use the location
of
it. I don't remember that there were cups-Samba bugs in 3.0.14a.
Perhaps try to disable all access restriction from localhost, so it does
no longer matter, wich uid samba has.
Try accessing CUPS with the client tools (accept, cancel ...) to test
your settings.
Bye,
Martin
--
Martin
... line really functional, you'll
also need an enumports comand and the ability to create new ports and
keep them in sync with the cups printers.
bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from
go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions
this remaining connection manually.
I do this in conn.c / conn_idle_all(). But there might really be more
elegant ways...
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following
samba_cv_HAVE_MEMORY_KEYTAB=yes
export samba_cv_USE_SETEUID=no
...
Sometimes it's a bit tricky to find the right variables but searching
the configure script for those cannot run test program ... is allways
a good start.
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH
was what
you meant by compile smbd with -g, and I didn't get any warnings running
gdb pid, so assuming it worked... what next?
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL
,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
,@Printer-Admins
read only = No
Anybody has an idea what the problem may be?
Regards,
Wolf
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions
and ntforms.tdb.
But you haven't mentioned, what exactly the problem is. Uploading new
drivers shouldn't be affected be deleting the old driver files...
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from
domain SID). So the trusted domain has not been added to the
internal samba domain-list!
Tja...
Martin
Martin Zielinski wrote:
Hello list,
I have two NT4 domains with trust relationships between them.
The samba 3.0.20 client has joined the domain TEST01.
TEST02 is the trusted domain (which lies
calls succeeded
samba-3.0.20/source wbinfo -m
TEST02
samba-3.0.20/source wbinfo -u
TEST01\Administrator
TEST01\Gast
TEST01\user-test01
The wbinfo manpage says, that Users in all trusted domains will
also be listed.
Ideas? Thanks.
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software
to be readable only for the user.
I am completely stumped, can anyone shed any light on this?
Setup:
SuSE Linux 9.0 (i586)
samba Version 3.0.14a-SUSE
winbindd Version 3.0.14a-SUSE
Cheers,
Hamish
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH
3.0.6.
But I could swear, I would have had problems with this earlier ...?
Anyone who does _not_ see this behaviour?
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL
printer = designjet
any ideas what else to look at?
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo
?
Greetings,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
/shares
I have looked at the samba logs and there is nothing listed.
Mike
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: https
--Switchfoot (2003)
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFBtwG3IR7qMdg1EfYRAir/AJ9t7u9f24PH/bARPXKt0emKyWtobACfYpAK
7LvcSN/7GohUT7ND14YdUhQ=
=+q/F
-END PGP SIGNATURE-
--
Martin Zielinski
);
#reload samba manually
system(/usr/bin/killall,-HUP,smbd);
sleep 2;
}
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions
customers believe, that it is
an M$ bug, but I didn't find anything in this case, that works on M$ and not
on Samba.
Bye,
Martin
P.S. To Rohan's mail:
Yes, it's definitly an RPC problem.
--
der tom
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH
+IR7qMdg1EfYRAv+UAKDcOzVG512IOp+98ikvn+weFFCwdACeKc3i
CoBWKfCovRMR+AAj3+sIJIM=
=BiX+
-END PGP SIGNATURE-
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL
is a loop through the printer's registry values. In the
network trace I can see GetPrinterData calls over and over.
Hopefully someone gets an idea, how to work around this MS bug.
Greetings,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik
.hlp:NULL:RAW:NULL'
I created the files with the same permission as mentioned above. No problems.
Just be aware, that your printer admin maph might not have write permissions
in your driver dir.
Sorry, no other idea :-(
Martin
Thanks,
Philip
Martin Zielinski wrote:
Now, that you have
however I have tryed to print a
document in more copies and the printer has made only one.
Is it a normal thing or is it a printer setting problem?
Thanks
Ps: I'm using samba 3.0.7, cups 1.1.17
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik
, even though I've removed those files. So, I'm wondering if there
is a file in Linux/Samba that maintains a list of those drivers which I can
edit?
Any help on completely removing a PointAndPrint printer would be greatly
appreciated.
Thanks,
Tim Stanley
--
Martin Zielinski
drivers dir 777, still access denied...
Regards,
Philip
Martin Zielinski wrote:
Hello Philip,
try putting the printer admin parameter into the global section.
It's a global parameter that cannot be used per share.
Greetings,
Martin
On Monday 04 October 2004 16:00, Philip
not clear the jobs, and CUPS
shows the jobs as printed. It is interesting to have a complete history
of the printer, but this confuses users! Deleting the jobs works, but
is there a way to stop them filling up the windows printer queue?
--
Martin Zielinski [EMAIL PROTECTED
be
# browseable, printable, public.
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writeable = no
printable = yes
printer admin = maph,root
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH
] |
-
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
just like ordinary printers. There's no difference
between them.
You should upgrade your Samba version to 3.0.6. There have been some bugs in
the printing code in earlier versions.
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik
Douglas Sterner
Please try Samba 3.0.6. Gerald Carter has fixed several tings in printing
since 3.0.5. Just to be shure...
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go
the
printername contains the drivername (e.g. HP Laserjet 4 (Copy 2) vs. HP
Laserjet 4).
This is the behaviour I can see with local printers under W2k.
(Haven't even seen this, until Gerald told me).
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
, when changing the printer
driver of a local queue.
Just my point of view... any comments?
P.S.
To the topic print spooling messages never go away:
We're not able to reproduce it with 3.06rc2. We'll still have an eye on that
but can't provide reasonable infos now.
Bye,
Martin
--
Martin
on
a few of the 50 queues it's serving.
Any ideas?
Thanks
Greg
Samba 3.0.4
Fedora Core 1
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
--
Martin Zielinski [EMAIL PROTECTED]
Software
. This is my configuration:
Gcc-3.3.2, Glibc-2.3.2, Binutils 2.14 and Linux 2.6.5 .
Now I get the following error:
Checking configure summary... ERROR: no seteuid method available
Configure: error: summary failure. Aborting config.
Where am I making mistake?
-thanks,
Rajesh
--
Martin
.
Bye,
Martin
--
Martin Zielinski [EMAIL PROTECTED]
Software Development
SEH Computertechnik GmbH www.seh.de
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
1 - 100 of 112 matches
Mail list logo
