If my reading of the /etc/rc.d/init.d/network script is correct, the
ifconfig commands should be taken care of by the ifcfg* files in
/etc/sysconfig/network-scripts, and additional route commands are produced
with the help of /etc/sysconfig/static-routes. Both types of file are
produced by linux
How to find out if eth0 is Realtek or 3COM:
1) If you do "ifconfig eth0" there will be an "Interrupt" number. Look
for that number in the left column of the listing you get from "cat
/proc/interrupts". You may be able to tell from the right column whether
eth0 is Realtek or 3COM.
2) When
On Tue, 18 Sep 2001, [EMAIL PROTECTED] wrote:
> On a related note to this - if you have Gnome and KDE installed, Gnome is
> the default log-in, and you can change a particular log-in to
> KDE. However, I haven't be able to make the default log-in KDE (instead of
> choosing KDE everytime before I
On Wed, 19 Sep 2001, Dominic Baines wrote:
> ...
>
> There is no lokkit man page, no docs, the lokkit page has... well no
> doc's their either.
>
> ...
As others have said, your problem is probably not with lokkit. But if
you want documentation on lokkit for other reasons, with gnome-lokkit
On Mon, 24 Sep 2001, James McP wrote:
>
>
> I would recommend you use a firewall on the connection. IPchains should be
> installed by default on a RH71 system. Put this script file in
> /etc/rc.d/init.d/ as the file ipchains. It is a very, very, very basic
> ipchains ruleset I wrote
On Tue, 25 Sep 2001 [EMAIL PROTECTED] wrote:
>
> Hi,
>
> I trying to setup a RAID-1 system using the following;
>
> disks: /dev/hda and /dev/hdc
>
> /dev/md0 /boot
> /dev/md1 swap
> /dev/md2 /
>
> Everything works well, except for the following.
>
> When I simulate a disk failure on /dev/hdc,
On Thu, 27 Sep 2001, Jochen Kächelin wrote:
> I'am new to linux and I have
> installed a "rc.firewall" script
> using IPTABLES.
>
> What might be a good tool to test my box!
> It would be nice if there's a tool with
> a GUI!
There are web pages that help test boxes. See http://grc.com/ and
On Thu, 4 Oct 2001, Graham Squire wrote:
> Hello all,
>
> On Linux 7.1 running kernel 2.4.2-2 networking is working properly. I
> configured kernel 2.4.10 and made sure all networking settings are correct.
> When I reboot eth0 fails to start. In Network configuration eth0 is
> inactive and will
On Thu, 4 Oct 2001, root wrote:
> ...
> My problem is that I wish to boot either drive using LILO. I have LILO
> all set up to boot the first hard drive; however I cannot get it to boot the
> second drive -- it seems to want to use Red Hat's kernel and map files; I
> cannot figure out how t
On Thu, 18 Oct 2001, Jason Lim wrote:
> Dear all,
>
> Sorry for this simply question..
>
> I'm trying to type route add 127.0.0.1 but i get " SIOCADDRT: No such
> device " ERROR!... What is this mean??
Maybe route expects you to specify dev as, say, eth0 or lo. For
example, although I don't k
On Fri, 19 Oct 2001, Satterthwaite, Chris wrote:
> ...
> Does anyone know the link to the actual kickstart documentation site? I
> can't find any leads from poking around on RedHat's support site.
>
> ...
There's kickstart documentation in some sections of the "Official Red
Hat Linux Custo
On Sun, 21 Oct 2001, Mike Chambers wrote:
> - Original Message -
> From: "Harry G" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, October 21, 2001 11:04 AM
> Subject: Re: Update agent snagging
>
>
> > You will note the last 2 are the util-linux files. Apparently, none of
On Mon, 22 Oct 2001, # sriram # wrote:
>
> hi...
>
> my 2.4.2-2 kernel recognizes the DLINK ethernet card but when i
> upgraded my kernel to 2.4.9 it says eth0 .. delayed and failed...
>
> my card is DLINK DFE 538 TX...
>
> what should i do from here
I notice that in /usr/src//drivers/net
on...i rebooted the machine and then i got the same old
> error...eth0 failure...
>
>
> Something intresting to be noted here is this...when i installed 7.1
> it did not detect my card i had to manually run netconfig
> afterwards... i tried to play the same trick here(with
On Thu, 25 Oct 2001, Frank Tanner III wrote:
> I know I am going to feel like a dumbass when I get the answer,
> because I have probably overlooked something very basic, but here
> goes.
>
> I am trying to automate the scp'ing of a file from one server to
> another. On the computer that the scp
On Fri, 26 Oct 2001, Craig Harmon wrote:
> I have been trying to update the glibc packages (rpm -Fvh
> glibc.)
> and I keep getting the following errors:
>
> error: failed dependencies:
> glibc-common = 2.2.4-19 is needed by glibc-2.2.4-19
> glibc-devel < 2.2.3 conflicts with glibc-2.2
On Tue, 30 Oct 2001, Edward Konetzko wrote:
> HI
>
> Does anyone know how to "HUP" dhcpd. I read the man page and it says to
> send it a "SIGTERM" witch is signal 15. (kill -s 15 right?) When I do
> that
> the server dies and has to be started again. I know its not the config
> file since the
On Wed, 31 Oct 2001, RHL71 wrote:
> Hey all,
>
> I'm running RedHat 7.1 and using xinetd as opposed to inetd for the
> first time.
> Everything appears to be working well except one critical service, SSH.
> Has anyone managed to run SSH, not openssh, via Xinetd successfully ? If
> so,
> could y
On Wed, 31 Oct 2001, Cheryl L. Southard wrote:
> Hi All,
>
> This HORRIBLE thing has happened twice to me under RedHat 7.1, and I
> am desperate for a solution.
>
> Basically, we have about 10 or so PCs running RedHat 7.1. Both times the
> partitions dissapeared, we were rebooting the computer
On Fri, 9 Nov 2001, Laxman Buneti wrote:
> Thank you steven for the reply.We reinstalled the NIS packages and seems to
> work a little bit.
>
> But I get the following error message when I start up the system...
>
> ypbind listening to server[FAILED]
>
> After the system starts up,and we
On Tue, 13 Nov 2001, Selvikunnam wrote:
> Is there any way to give access conrol for particular user to run specific
>application.
>
> Ex...
>
> A,B,C is a user in different group
>
> Everyone using "ymessenger " application for chating
>
> How can i give access only to user A. So that other
On Tue, 20 Nov 2001, Edward Konetzko wrote:
> I have a small amount of data that needs to be backed up every night. The
> amount of data isnt even enough to fill up a CD-RW. I dont have the money
> for a tape but if need be I could get enough. I was thinking about just
> burning the data to a
The "VFS: Kernel panic unable to mount root fs 08:00" says it's trying
to mount /dev/sda as root. But your root is /dev/sda2, which is 08:02.
You may be able to get your system up when booting from the scsi disk, or
if that doesn't work, from the boot floppy you made when upgrading by, at
t
On Tue, 9 Oct 2001, gabriel wrote:
> k
> i've been going crazy
> i think someone's been hacking into my webserver
> but i don't know how to be sure
>
> typing "last" at the command line returns a list of past logins
> and there's no one on there but me.
> but also on that list is the following li
On Tue, 9 Oct 2001, Steven W. Orr wrote:
> I just had a disk problem and ended up having to reload :-(
>
> My question is this: I do not use yp but I was wondering if I need to
> somehow cause the domainname command to execute. Is this needed? If so how
> to I do it? Do I put a domainname command
On Wed, 10 Oct 2001, Michael Schwendt wrote:
> On 2001-10-10, # sriram # wrote:
>
> >hi mikkel..how d'u correlate 08:15 to /dev/sda15
>
> device with major 08, minor 15
>
Except maybe "08:15" in the message is in hexadecimal, in which
case "15" means decimal 21. Since "ls -l /dev/sdb5" shows
On Wed, 10 Oct 2001, lonh SENG wrote:
> Hi all,
>
> How can I know my system is in top security?
> Do we have a site for testing this?
> Could anyone help me?
>
I like http://www.vulnerabilities.org/analysis.html
--
Steven Yellin
__
On Wed, 10 Oct 2001, Michael Davis wrote:
> Hello all,
> I recently used up2date to upgrade from 2.4.2-2 to 2.4.3-12. Everything
> seemed fine but I get this error:
> vfs:cannot open root device "2105" or 21:05
> please append a correct "root=" boot option
> kernel panic: VFS: unable to mount r
On Sat, 13 Oct 2001, Jochen Kächelin wrote:
> Which file is responsable for loading modules
> during the boot-sequence?
>
/etc/rc.d/rc.sysinit
--
Steven Yellin
___
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/l
Some places to look for what jobs are automatically periodically
run are
1) /var/spool/cron has everybody's crontab files. If root has one,
the file will be named "root", for example. The crontab files say
what each user who has one wants to be run and when it should be run.
2) /etc/crontab
To find out about the mon service, one place to start is by typing
"rpm -ql mon". It will show there's a file /etc/rc.d/init.d/mon, which
probably means mon is known by chkconfig. The command "chkconfig --list
mon" will tell you the status of mon; it's probably on in levels 3, 4, and
5. The
On Wed, 2 Jan 2002, zpetar wrote:
> I use RH 7.2 or RH 7.1 in some servers.
> And there is a need for file's larger that 2GB.
> Can i USE it on EXT3/EXT2/REISER/.. ?
>
See http://www.suse.de/~aj/linux_lfs.html.
--
Steven Yellin
___
Seawolf-li
What you are describing sounds like your computer has been hacked, not
just "ftp". Since you have no way to know what the cracker has changed in
your computer, it won't help to replace ftp; they'll just come in again
and do what they want. The normal approach when a computer has been
broken
I assume /tmp and /var/log are part of the / partition. You can
prevent / from being filled with their contents by using some other
partition to hold /tmp and /var/log. Just make those directories be
symbolic links to directories on another partition.
On Thu, 24 Jan 2002, alexis Vasquez wr
I've had disks with bad blocks before, and the messages you've copied
don't look like that's the problem. It's more likely that you have an
unusable disk. You could try checking that its cables are fully attached.
The manufacturer may supply software for testing it. For example, if the
di
On Mon, 28 Jan 2002, alexis Vasquez wrote:
> --- "Taylor, ForrestX" <[EMAIL PROTECTED]>
> escribió: > > It's a working server and the users
> conections
> > made
> > > the /tmp grows a huge.
> > > ...
> > ...
> FilesystemSize Used Avail Use% Mounted on
> /dev/sda1 98M
Oops!. I gave a wrong line. The corrected instruction is the one
without the ">" preceding it.
On Mon, 28 Jan 2002, Steven J. Yellin wrote:
> On Mon, 28 Jan 2002, alexis Vasquez wrote:
>
> > --- "Taylor, ForrestX" <[EMAIL PROTECTED]>
> > es
On Sat, 2 Feb 2002, Ian Firla wrote:
> But as Andrew Smith suggested:
>
> > Most likely, you didn't use RPM to install the new kernel
> > thus RPM doens't know anything about it.
> > If you add any software at all to the computer without using
> > RPM to install it then you have problems:
>
On Sat, 2 Feb 2002, Ian Firla wrote:
> > There must be a way of doing that, but I don't know it. Instead you
> > could copy the kernel rpm's from Redhat's site or from a mirror, then
> > install them yourself, after finding out how such a thing is done -- see
> >
> > http://www.redhat.com/su
On Wed, 6 Feb 2002, Urte Fürst wrote:
>
> Hi,
>
> I'm responsible for a bunch of linux machines with RedHat 7.1, kernel
> version 2.4.9-6. The machines are organized in such a way that we have
> a yp domain and one ypserver machine to distribute especially passwords
> among all machines without
On Sat, 9 Feb 2002, zpetar wrote:
> How to make my linux box works with files larger than 2GB ...???
See http://www.suse.de/~aj/linux_lfs.html
--
Steven Yellin
___
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/list
If you really tried to install with "rpm -i wu-ftpd" you should have
gotten "error: open of wu-ftpd failed: No such file or directory".
Perhaps you correctly gave the full name of the file instead of just
"wu-ftpd". Another test of whether you have wu-ftpd is "rpm -q wu-ftpd".
If wu-ft
Although I've never tried doing what you're trying, I suppose after
you've cd'd to the floppy the command "mknod random c 1 8" would work.
On Mon, 29 Apr 2002, Derek Schaible wrote:
> Greetings list,
>
> This may be a potentially stupid question, but:
>
> How would I go about getting /dev/
On Thu, 9 May 2002, Ashwin Mansinghka wrote:
> Hi Robert,
>
> On Thu, 9 May 2002, Robert wrote:
>
> > Hey again Ashwin...
>
> --- Snip
> >
> > #!I hope the above generally covers what I might be coming
> > #!across. Is there a simple way to do this downgrade to i386
> > #!(kernel compilati
On Mon, 27 May 2002, madhvi wrote:
> Hello
>
> I have tried automating the backup of my files by scheduling the
> execution of scripts ( I am using rcp to copy the files onto another
> fileserver).
>
> The problem encountered is :-
>
> I log in as root and issued the crontab -e command. Added
I'll leave most of your questions for others to answer, and will take
1) and 3):
1) Put your other files anywhere but where your server can access them.
I assume the control file for your server is /etc/httpd/conf/httpd.conf,
which should have a line like
DocumentRoot "/var/www/html"
(or wha
Did you restart or reload nfs on the server after changing the export
file?
If you have a firewall, have you checked that it will permit the
communication -- by temporarily tearing down the firewall, for example?
On Wed, 29 May 2002, Samnang Tep wrote:
> Hi everybody,
>
> I have problem
You should expect "ls -l /boot" to show the file, System.map, as a
symbolic link to some other file that exists. For example, on my computer
I see "... System.map -> System.map-2.4.9-21smp". Perhaps you either lack
an analogous link, or the file to which the symbolic link points doesn't
exist
Here's a sample script that checks for an adsl pid and does something
when the "ps auxww" command doesn't produce a line with "adsl" in it:
#!/bin/bash
PID=`ps auxww | grep adsl | grep -v grep | awk '{print $2}'`
if [ -
More specifically, the two messages
> > Starting SMB services: [ OK ]
> > Starting NMB services: [ OK ]
are produced by the "start()" section of /etc/rc.d/init.d/smb. I don't
use samba, but these seem to be simply i
The whole disk is /dev/hdd; the first partition is /dev/hdd1. Try
partitioning the disk again; then create the file system on the first
partition, instead of on the whole disk, with "mkfs /dev/hdd1" instead of
"mkfs /dev/hdd". Although it takes much longer, you might consider
"mkfs -c /dev/h
I'd be surprised if "mkfs /dev/hdd" permanently damaged the hard
drive. So if you tried to repartition it, but fdisk found only 33 GB
available after originally finding 120 GB, I have no explanation for
what changed.
I have a WD1200BB 120 GB disk for which "fdisk -l /dev/hdb" shows
Dis
Another idea: fdisk has an expert option, x. The expert menu allows
you to change the number of cylinders ("c") and the number of heads ("h").
If somehow "mkfs /dev/hdd" messed up those numbers, you should be able
to restore them with fdisk.
On Sun, 23 Ju
nvalid
> partition).
>
> Thanks again,
> Laxman.
>
> > Another idea: fdisk has an expert option, x. The expert menu allows
> >you to change the number of cylinders ("c") and the number of heads ("h").
> >If somehow "mkfs /dev/hdd" m
Check with fdisk again. It looks as if you answered "245" instead of
"255" when you tried to set the number of heads with fdisk's expert mode.
On Tue, 25 Jun 2002, Laxman Buneti wrote:
>
> Hi Steven,
>
> I did the steps you suggested.After I reboot, "dmesg " commands outputs the
> follow
Use the boot floppy that you presumably made when you installed linux,
then run lilo.
On Wed, 26 Jun 2002, Don Geddes wrote:
> I'm running RH 7.1 and Windows XP. I had a crash where I had to
> reinstall Windows. Now I can't get to the LILO prompt to boot into
> Linux. Any suggestions.
>
> T
Just in case nobody gives you a suggestion based on more understanding
than I have, here's a possible thing to try: Remove the scsi and tape
modules and then reinstall them. For example, if your scsi module were
aic7xxx and the tape module is st (you should see the modules when you
type "ls
On Tue, 2 Jul 2002, Juma wrote:
> Hi,
> I have Redhat Linux and Win2000 configured as dual boot with LILO and its
> running fine...
> I have bought Win XP and I want to upgrade my Win2000 ..I have some doubts
> in that..
> 1) if i upgrade to Win XP will it affect my Lilo which is my boot manager.
As I understand it, in /etc/sysconfig/network, the line HOSTNAME=...
is used by the hostname program (when networking is brought up during the
boot process) to set the system's name. It's what the machine calls
itself. It's not necessarily the same as the fully qualified domain name,
which
On Mon, 8 Jul 2002 [EMAIL PROTECTED] wrote:
> "Martinez, Michael - CSREES/ISTM" <[EMAIL PROTECTED]> wrote ..
> > I recently had a network audit, which had the following to say about my
> > LInux machines. Wanted to get some feedback from the list. It seems rather
> > bogus. I never heard of this.
I don't have a RedHat 7.1 log file to look at, but believe the kernel
starts kswapd just before it looks for the mouse. So your problem may
have something to do with your mouse.
On Wed, 10 Jul 2002, Arun Kumar wrote:
> Hi,
>
> iam newbie to linux. i have installed redhat linux 7.1
> in my
On Wed, 10 Jul 2002, Paul Weber wrote:
> I have been running with a fairly stock copy of RH 7.1. I signed up for
> RHN and let it do its thing, including the kernel updates. The machine
> got the new kernel, but no initrd was placed in /boot. Of course the
> new kernel can't find its way out o
I believe 03:08 is /dev/hda8. If something is wrong with that
partition, or you didn't really put your root file system on /dev/hda8,
neither your floppy nor any other boot system will be able to start up
linux with root on 03:08. What's really on /dev/hda8? If you think your
root is somewh
Some things to try: Can you ping somebody else if you specify their
IP number, instead of their name? Can others ping you by IP number or
name? What does the "route" command show? Do you have nameservers in
/etc/resolv.conf?
On Thu, 11 Jul 2002, Bill Fowler wrote:
> Hello,
>
> Using Red
Here's a sample from a boot of a 7.2 machine for comparison with
your interrupted 7.1 boot:
...
PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI->APIC IRQ transform: (B0,I7,P
If you have win2k on one partition of the disk, say /dev/hda2, and
then install linux on other partitions, with lilo used by linux, you can
restore your ability to boot in win2k by editing /etc/lilo.conf and adding
lines such as
other=/dev/hda2
label=windows
Then execute the command
According to the mkbootdisk man page, "The created boot disk looks for
the root filesystem on the device suggested by /etc/fstab." So maybe it
would work to temporarily change /etc/fstab so that /dev/hda5, instead of
/dev/hda7, corresponds to /. Run mkbootdisk, then change fstab back to
/dev
It sounds like what normally happens when a computer goes down in an
abnormal way, at least if you don't have journaling file systems. What
you should do is probably what was advised on your screen around the time
it said the filesystem is dirty: run fsck to clean up the little
inconsistencie
Early in the boot process your root file system is mounted read-only.
Then /etc/rc.d/rc.sysinit changes it to read-write after setting the
hostname and after a few other initialization procedures. The hang
prevented your computer from doing "mount -n -o remount,rw /".
When you power your
It may well be a hardware problem. If it's a software problem, the
easiest solution may be to reload the system. Otherwise...
Once you get to the point where you can get / to be writeable, look
for where you get into trouble booting by examining /etc/rc.d/rc.sysinit.
>From what you said, th
Since you have not yet gotten a response, I'll comment based on very
little knowledge of how installation works, no experience burning CD's or
installing on an Alpha, and no experience with 7.1. I looked at
/sbin/anaconda on a 7.2 system, and the only exec statement is a line
exec "import
It is my understanding that the memory 'in use' doesn't just include
the memory being used by all running processes combined. It also includes
memory used to store information just in case it is needed. This extra
memory can be given up to a process that needs it and has a right to use
more
On Wed, 31 Jul 2002, vvor wrote:
> I have two hdd, 1 contains seawolf, the other is empty.
>
> the first looks like this:
> / 3gb
> /boot 15mb
> /usr 3gb
> /home 9.8gb
> /web 3gb
>
> the other has 2 partitions, thus:
> /backup 10gb
> /netdrive
ed" warnings. does this matter? can i still boot into
> the backup?
>
> /sysback comes out smaller than /.
>
> backing up /usr to /usrback, the backup turns out larger than the source.
>
> any elucidation? do these things matter?
>
> thanks,
>
> vora
>
>
After I suggested copying / into another partition called "/sysback",
and copying /usr into another partition called "/usrback", so that he
could boot using the backed up partitions for his system, on Thu, 1 Aug
2002, vvor wrote:
> so, if i restore, using your example, with root=/sysback, and
Are you saying that even if you logged on as root you couldn't delete
files from /tmp? Or could you delete the files, but the disk didn't get
any emptier? If the latter was your problem, it could be that some
program or programs had the files open that you were trying to delete.
Rebooting t
If you do "rpm -ivh Mesa*.rpm" as root you should get what's on the
Mesa rpms all installed, including libraries.
On Fri, 9 Aug 2002, hans schneidhofer wrote:
> hi list,
> have downloaded mindseye and some needed stuff like Mesa, nurbs.
> but got some problems in installing Mesa and Mesa-de
Maybe your firewall doesn't permit it. If you have a firewall, try
temporarily stopping ipchains or iptables. To see which is being used,
do "ipchains -L" and "iptables -L", and if you only get three lines saying
all is accepted, your firewall won't be blocking anything. If it is your
firew
Although I've never set up masquerading myself, since nobody else has
responded, and since it's easy to answer some of the questions, here goes:
First of all, read the IP-Masquerade-HOWTO (it's on RedHat's Documentation
CD-rom, for example).
I assume eth0 is what you use to talk to the
On Tue, 17 Sep 2002, Shane C Branch wrote:
> My root account has on the order of 300 email messages all regarding an
> error with tripwire. The error tells me to run
> /etc/tripwire/twinstall.sh and/or tripwire --init.
>
> My first question is what does tripwire do? It appears to have somethin
On Thu, 19 Sep 2002, Paul Weber wrote:
> Sorry for the delay, we had a server go down.
>
> Somewhere in the last few messages, the things I tried must have shaken
> something loose. Now, the tape drive shows up in /proc/scsi/scsi, and
> the device /dev/st0 exists. I now hold in my hot little h
On Sat, 21 Sep 2002 [EMAIL PROTECTED] wrote:
> Hi, I have RedHat Linux 7.1, and when the system is initializing I get the following
>message:
> "Starting system logger... FAILED"
> Can someone please tell me what this is about, or what is causing this, or how can I
>fix it?
>
Check
On Mon, 23 Sep 2002, Jean Solon [UNKNOWN] Vallès wrote:
>
> Ola
>
> I have this problem since a couiple of days
>
> I'm trying to set up a router with a Red Hat Linux 7.1 box
>
> I have an access to the net which is on eth0 200.50.198.110 (given by my ISP) mask
> 255.255.255.224 gateway 200.5
On Mon, 21 Oct 2002 [EMAIL PROTECTED] wrote:
> Can somebody send me a copy of the default ipchains configuration file
> (/etc/sysconfig/ipchains) that's shipped with seawolf?
> I lost mine while trying to tune it.
>
So far as I know, the configuration file is not shipped with RedHat.
Instead,
On Tue, 22 Oct 2002, tirumal b wrote:
> i have installed redhat linux 7.1(seawolf) in my
> system . when i halt the system i get an error at the
> end as Bad EIP value segmentation fault. can your
> please help me out
>
A google search for "EIP" shows it stands for "Extended Instruction
Poin
On Fri, 25 Oct 2002, Conny Enström wrote:
> No it was a clean RH 7.1 install with upgrades.
> The 'serviceconfig' just show runlevel 3-5, and I want to edit runlevel 0.
> The problem is that when it try to shut down PCMCIA it hangs, even if I do
> it manually.
> I shutdown the network first and th
On Sat, 26 Oct 2002, Conny Enström wrote:
>
> - Original Message -
> From: "Steven J. Yellin" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, October 26, 2002 12:22 AM
> Subject: Re: shutdown order?
>
>
> > On Fri, 25
On Mon, 28 Oct 2002, Jason Lim wrote:
> Hi all,
>
> Can anybody tell me which files is storing routing table info?
> Can I manually change this file & restart the services to enbale the
> services?
See /etc/sysconfig/network, /etc/sysconfig/network-scripts/ifcfg*.
Other routing information ca
On Thu, 31 Oct 2002, Kevin Weslowski wrote:
> Hi John,
>
> my internal network: 192.168.1.x
> the defective machine: 192.168.1.1 and one other machine 192.168.1.2
> Why would it be a DNS timeout from inside the network and not outside?
> How do I check if it's a DNS timeout?
> Thanks,
>
> Kevin
On Sat, 2 Nov 2002, Kevin Weslowski wrote:
> Hi again,
>
> well, maybe it is some sort of DNS error...well, SSH/http started
> working last night again, but not ftp...ftp started working this
> morning...
>
> I did a capture of an unsuccessful ftp session last night and there were
> several pack
he IP for SSH or
> > > within a web browser, and for everything pertaining to that box...so
> > > there's no way it could be a DNS timeout, I think...right?
> > >
> > > Kevin
> > >
> > > "Steven J. Yellin" wrote:
> > >
> > >
You can (and should, I think) use rsync with openssh in order to make
it secure. The failure before would happen if (wisely, I think) your
computers are set up to prevent use of the insecure rsh. Assuming you
have openssh installed, try modifying your command to
rsync -e ssh ipass:/home/gar
On Sat, 2 Nov 2002, Michael Tiernan wrote:
> Can someone please tell me what the trigger is for the nightly "incident"
> report execution that is run on the systems? Somewhere there's a proceedure
> to go through the system log and report on problems. I seem to have turned
> mine off by some
>
> -Original Message-
> From: Steven J. Yellin [mailto:yellin@;SLAC.Stanford.EDU]
> Sent: Tuesday, November 05, 2002 2:43 AM
> To: '[EMAIL PROTECTED]'
> Subject: RE: rsync
>
>
> You can (and should, I think) use rsync with openssh in o
is is because of this two server are using
> same user name but with different password?
>
>
>
> "Steven J. Yellin" wrote:
> >
> > For openssh, to log on w/o a password, on the computer from which you
> > want to log on, run "ssh-keygen -t rsa"
On Tue, 5 Nov 2002, Martinez, Michael - CSREES/ISTM wrote:
> How do I change the locale returned by the "date" command from "GMT" to
> "EST"?
>
Run "timeconfig".
--
Steven Yellin
___
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.re
Changing "noauto" to "auto" in a /etc/fstab line means the device will
be mounted at boot. It does not mean it will be mounted at the time
someone tries to access the cd reader.
On the other hand, autofs can be used to mount the cdrom when an
attempt is made to access /mnt/cdrom, or magicdev
If you install the latest RedHat update of apache and do
rpm -q --changelog apache|head
you should see a line
- backport chunked encoding fix from 1.3.26
I'll bet that means RedHat gave its latest update of 1.3.22 the security
fix normally attributed to 1.3.26.
On Tue, 12 Nov 2002, Daniel
On Mon, 18 Nov 2002, Hunt,Russ wrote:
>
> Hi
>
> I'm upgrading the kernel on a 7.1 install and have got to the point of
> running the lilo command to update my lilo.conf file. I receive the
> following message at that point
>
> [root@... /etc]# lilo
> Fatal: Can't put the boot sector on logi
On Sat, 23 Nov 2002 [EMAIL PROTECTED] wrote:
>
> I have activated the firewall for my machine through
> setup->firewall configuration menu. Now, I know it's working
> because I did a probe on may machine a www.grc.com before and
> after enabling the firewall, before the activation of the
> firewa
1 - 100 of 121 matches
Mail list logo
