I am new to the silver list but not to Colloidals. I am retired and spend a lot
of time making them. for the past 2-1/2 years. I have made Colloidal Silver
with a 30 volt DC unit I built.
Recently I built a 15000 volt AC unit and have been making
Gold, Silver, Copper and Zinc. I make and give
Question for anyonecan you give us his website?
- Original Message -
From: oldgl...@bigcountry.net
To: silver-list@eskimo.com
Sent: Monday, July 12, 2004 7:28 PM
Subject: CSQuestion for anyone
Hi,
I LOVE Dr. Williams! He is wonderful and has many tips and ideas on how
Greer202 wrote:
Hi folks,
I have purchased some . silver wire ( have cert for silver) and wish
to make some CS. have read a few homebrew sites.
can you recommend a site that give step by step, kind of idiots guide?
Did you get an answer to your request, Greer?
What do you say,
At 08:54 PM 7/12/2004 -0500, you wrote:
I did some research and found out that some people have found mixing a little hydrogen peroxide into colloidal silver can make the silver particle size smaller and more ionic.
## many people on this list do that and like it. Most use off the shelf
http://www.drdavidwilliams.com/
At 02:36 AM 7/13/04, you wrote:
can you give us his website?
- Original Message -
I LOVE Dr. Williams! He is wonderful and has many tips and ideas on how
to find and use alternative health options.
--
The Silver List is a moderated forum for
bob smith said:
I have a neighbor, about 40, who had MS for 6 years
when I started him on EIS. At that time he was
beginning to have serious difficulty. This was a year
ago in March. By June he was showing definite
improvement and at this time his symptoms are gone. I
don't believe he has added
At 12:53 AM 12/07/04, Garnet wrote:
Stopping the inflammation is
the goal of treatment, as the cause is unknown and often not even at
play any longer. Once the inflammatory process gets started it seems to
be self-perpetuating on a cyclical basis.
Actually there is a vast amount known about
I have and use daily a Omron comp air elite which I use Daily with CS.
I paid less than $60 from listed above
Bob
-Original Message-
From: silver-list-requ...@eskimo.com [mailto:silver-list-requ...@eskimo.com]
On Behalf Of Jim Holmes
Sent: Monday, July 12, 2004 11:02 PM
To:
Hi:
It took me nearly a year to come up with a procedure to make Colloidal Gold.
I just recently started making it and a few people have tried it.
It is used for pain and arthritis relief. It is also used for emotional
problems. I have had only two people reply after taking it. One 87 year old
At 11:54 AM 13/07/04, you wrote:
I did some research and found out that some people have found mixing a
little hydrogen peroxide into colloidal silver can make the silver
particle size smaller and more ionic. It's supposed to increase the
effectiveness dramatically. I'm just wondering if
Use of a current regulator as in list above will let you have a constant
current CS Generator.
Personally I use around 1 Mill Amp or less, use on most any DC power source.
If you have low voltage source just move silver close together.
The nice thing is with Current Regulator you will never exceed
William Amos wrote:
I am new to the silver list but not to Colloidals. I am retired and spend a
lot of time making them. for the past 2-1/2 years. I have made Colloidal
Silver with a 30 volt DC unit I built.
Recently I built a 15000 volt AC unit and have been making
Gold, Silver, Copper
I use DMSO and CS internally, to rinse and hold in my mouth for tooth
and gum disease prevention and I also swallow this. Seems to give more
of an effect than CS alone although I have not experimented that much
with using it this way, I have used it to get over an unexpected flu
bug. Unexpected
I read that 0.03 ppm will keep water sterile. One ppm is 1 mg per liter,
so this would be 0.03 mg per liter. Not a whole heck of a lot if this
figure is accurate.
Garnet
Also, I have heard some people say that you can add a little colloidal
silver to regular water to purify it. Anyone with
If possible i would like this info also I have a sister in law in a wheel
chair from ms ty Jen
- Original Message -
From: Terry Chamberlin tcj...@yahoo.ca
To: silver-list@eskimo.com
Sent: Tuesday, July 13, 2004 7:57 AM
Subject: CSCS MS
bob smith said:
I have a neighbor, about 40,
My horses eat hay and pasture grasses, both untreated. No commercial
oils, any oil I feed is cold pressed. I generally feed Black Oil
Sunflower Seeds with minimal chemical processing because they are still
in the shell and sold for wild birds which are very sensitive to chems.
ERU, or Equine
I tried the link, yahoo couldn't find it.
~Nathan- Original Message - From: Garnet Date: Tue, 13 Jul 2004 10:04:23 -0500 To: Silver List Subject: CSDMSO and CS [was Hello everyone !] I use DMSO and CS internally, to rinse and hold in my
Wow, and I was thinking I was isolated in the experimental, X-files-ish types who mess around with stuff (perhaps that they shouldn't) and learn stuff that's absolutely incredible.
So tell me, what grade of H202 do you use, and what concentration?
~Nathan- Original Message - From: John
It is a term used here which means Electrolytically Isolated Silver. It
is the true colloidal silver made with distilled water, but that term is
so misused, being applied to everything from silver compounds, MSP and
silver gunk made with salt or tap water, many of us have started using
this
What is EIS
Bob
I should try that. I live in Korea, where the tap water is not considered drinkable, unless you boil it (and usually only the Koreans do that, many people by bottled water). Of course, I would add a lot more colloidal silver just to be safe. But I am wondering about potential byproducts with
Hi! I used to subscribe Alternative a couple of years ago. Some of the
information is really helpful but, there are a lots of junk as well. He is
mostly
an advertising/promoting his products. He claims to be an independent
researcher but, in reality, he is a promoter for
Bob, This is of great general interest, so can you please post the
particulars on this list, or, if you decide on the OT list, let us know on this
list so we will be sure not to miss it. Congratulations on the achievement,
both to the 'patient' and to you for your part in the cure. pj
Every year when I start out with my motorhome I put about one ounce per
gallon in whatever water is left over from last year.
That's about two quarts for a 60 gallon tank if it was left full.
Does the job for me,never had a problem with it.
Dave
Garnet wrote:
I read that 0.03 ppm will keep
If you look at a chemical analysis of food grade H202, which I did
(nope don't remember the site) it has a LOT of stuff in it. Maybe
different stuff, but apparently it is so caustic (?is that the right
word?) that it is impossible to make it pure as it ends up with
contaminated with stuff
I cannot locate the information but I distinctly recall the mention of 1
teaspoon per
gallon being sufficient. When asked I also say to add an extra teaspoon so for
sure
there's overkill. That's about one third ounce per gallon. For sure 1 ounce
per
gallon will do the job Dave.
Trem
-
MessageI have seen it used on this site a number of times. It was supposed to
stand for electrically isolated silver. I am by no means an authority in any
technical area but to me it stands for electrically ionized silver. It has
been pointed out that what we are generating is not Colloidal
R.Meredith/Marshall Dudley.
I have a bad habit of mixing things up. The P.S. on my reply to R. Meredith
was intended to be on a reply to M. Dudley. I think its time I change my brand.
Bob (hic) Smith
- Original Message -
From: Marshall Dudley
To: silver-list@eskimo.com
Garnet wrote:
I read that 0.03 ppm will keep water sterile. One ppm is 1 mg per liter,
so this would be 0.03 mg per liter.
Hi G. and all,
Where did you read that?
JOH
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted
Oh! Sorry, I typed it by hand and left out part of the link. This should
work.
http://groups.yahoo.com/group/DimethylSulfoxide-DMSO
On Tue, 2004-07-13 at 10:27, Nathan Filyk wrote:
I tried the link, yahoo couldn't find it.
~Nathan
- Original Message -
From: Garnet
Date: Tue,
I knew someone would ask that. I can only tell you that I read it when
first checking out CS last Fall. I started at Silver Medicine.org and
read linked articles. If it is an accurate figure it should not be too
hard to confirm it. The folks that supply systems for boats that use
silver should
i bought mine off of ebay. 1.7 gallon, ultrasonic, factory re-certified,
and paid 18.99 + shipping.
- Original Message -
From: oldgl...@bigcountry.net
To: silver-list@eskimo.com
Sent: Sunday, July 11, 2004 9:02 PM
Subject: CSNebulizer information needed, please
Hi,
I'm going to
I assume you are using 20 ppm CS to start out with Trem? Which *if* my
math is correct will more than produce a 0.03 ppm solution, it would
actually produce ~ 0.078 ppm.
If you used 15 ml (3 teaspoons) of 20 ppm CS (which contains 20 mg
silver in 1,000 ml) you are adding 0.3 mg of silver to a
Hi Garnet,
My recollection is that it was 5 PPM but could be wrong. Since CS is so easy
to make
that's why I tell folks that if some is good...more is better but that a couple
of
teaspoons per gallon will easily do the trick.
Trem
- Original Message -
From: Garnet
Hi,
May I ask, how could H2O2 cause smaller particles of Colloidal Silver unless
it was in the brewing?
Surely you aren't suggesting adding a drop or two of H2O2 per ounce AFTER
the Colloidal Silver is made would cause it to break into smaller particles?
Whichever way it is done, is there
MessageHi Bob:
I coined the term Electrically Isolated Silver several years ago.
There were quite a few reasons for doing so. We received ( and still do )
quite a bit of correspondence from people very new to the CS world who quickly
become very confused about the different products available
AOL Email
Subject: Hey Everyone, Please Read and Pass On, Thanks
We all have a stake in this fight.
Nancy
---BeginMessage---
Greetings from Utopia,
This is a different kind of newsletter. It may seem
strange for some readers, especially recent subscribers
who don't know us well, but
I have written to this list on many occaions. You can find it in the archives,
but I will again off to send the short journal I kept while curing myself of MS
with CS. I had MS since 1962 and by Aug 2000 I could barely get around. Today
I am 90% cured and I am better than I was 20 years ago.
Yes, there is proof. If you have a Hanna PWT and measure the conductance
of the finished EIS, then add some H202, the conductance will go up.
I've done this test several times and invariably the uS reading of the
PWT goes up when H202 is added to EIS. This is true even if the EIS is
perfectly
I agree with you. The 3% H2o2 increases the efficiency of my CS greatly.
Nancy
- Original Message -
From: sol sol...@sweetwaterhsa.com
To: silver-list@eskimo.com
Sent: Tuesday, July 13, 2004 11:51 AM
Subject: Re: CSA couple more questions (CS + Hydrogen Peroxide) and (CS
+H20)
If
40 matches
Mail list logo