*
'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
== QLogitechMediaServer version 2.04.00
=== 02-03-2019
* Minor
d6jg wrote:
> It should not be 192.168.1.2. Change it to be something like 192.168.2.2
> for setup purposes.
>
> It should pick up its real address from the hotspot but to set it up it
> should be different from internal addresses.
>
> You are nearly there.
well, i took a break, had dinner
It should not be 192.168.1.2. Change it to be something like 192.168.2.2
for setup purposes.
It should pick up its real address from the hotspot but to set it up it
should be different from internal addresses.
You are nearly there.
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* -
d6jg wrote:
> Yes that is correct. The issue if there is one will be the new WAP
> reconnecting to the WiFi hotspot on demand.
> You may have to keep the new WAP switched off - no affect on anything
> internal but no internet - until you have switched on the hotspot then
> switch on the new
dolodobendan wrote:
> Everything works fine here. No procs needed:
>
> Here's .QLMS.conf and the folder of QLMS:
>
> 26876
>
> 26877Oké nice that with 2.04.00 it works. Gone leave it as is.
A tip all the entries which can be 0 or 1 in the .QLMS.conf, you also
set by donning touch .(option
garym wrote:
> Podcasts are more popular than ever. Are you talking in general or in
> ability to play on LMS/Squeezeboxes?
Hi Gary
By this I mean that Podcast development seems to stagnate and that
people seem to prefer streaming music or other radio content.
Also I think a lot of people
mherger wrote:
> > A question, in LMS must /proc be read or read/write.
>
> I don't know. But I doubt it needs to be written to.
>
> --
>
> MichaelThanks for the fast info Michael. Gone leave /proc read only, makes
sense and gives a better feeling. One can never know, and in /proc there
is
No, I only had last.fm plugin active, no squeezescrobbler... (didn't
even know that existed)
As far as I can It seems the problem seems solved bij reinstalling from
scratch.
So I guess it's an unexplained glitch, possibly due to installing a beta
nightly version who knows
Paul Webster
You might have missed my edit earlier.
Do (did) you have SqueezeScrobbler enabled (as well as Last.fm
Audioscrobbler)?
Seeing different patterns for the artist name in the 2 scrobbles could
well mean that there were 2 different implementations doing the
scrobbling.
Paul Webster
A question, in LMS must /proc be read or read/write.
I don't know. But I doubt it needs to be written to.
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Everything works fine here. No procs needed:
Here's .QLMS.conf and the folder of QLMS:
26876
26877
+---+
|Filename: QLMS2.png|
|Download:
Started the #501 station:
Code:
[19-03-02 17:01:20.2000] main::init (387) Starting Logitech Media Server
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.028001 -
x86_64-linux-thread-multi
[19-03-02 17:01:23.7417]
digimaster wrote:
> Keep in mind the line before a error is mostly the thing causing it.
> Send from my mobile Phone
Yes, but in this case I could have this temp writing error without the
#501 error and vice versa. In my book that's a good sign that it's not
correlated.
I think that it's
Paul Webster wrote:
> Is there any chance that you have 2 different scrobbling clients
> enabled?
>
That is what I suspected also but I really could not think of what the
2nd client could be.
It's even getting weirder: when I set the log setting to 'debug' the
problem seems to disappear. Bit
digimaster wrote:
> Oke here is the test version.
> If there is a file called .PROC in the .qpkg/LogitechMediaServer
> directory, /proc will be R/W ( like in version 2.03.31 )
> If you remove it, and restart, /proc will be read like of version
> 2.03.35.
> You could also do this, by adding a
dolodobendan wrote:
> Ok, wait a second.
>
> CustomScan: The errors are there, because these files do not exist. I
> don't think they are needed (they are for MySQL). 'This error was always
> there'
>
Oke here is the test version.
If there is a file called .PROC in the .qpkg/LogitechMediaServer
directory, /proc will be R/W ( like in version 2.03.31 )
If you remove it, and restart, /proc will be read like of version
2.03.35.
You could also do this, by adding a line in the .QLMS.conf.
PROC=1
digimaster wrote:
> Oké but in the log still the error on file nor found. Keep in mind that
> the proc has to be done before starting lms. Every stop removes it.
>
> Gone make a test version, so we can be sure.
>
> Send from my mobile Phone
Ok, wait a second.
QLMS 7.9.2@2.03.31 x64
dolodobendan wrote:
> I made backups of cache & prefs, uninstalled QLMS completely and
> installed the latest (2.04) version. Looks good! Tested with both perl
> 5.024 and 5.28:
>
> >
Code:
> >
> [19-03-02 14:36:04.2801] MAIN::INIT (387) STARTING LOGITECH MEDIA
I made backups of cache & prefs, uninstalled QLMS completely and
installed the latest (2.04) version. Looks good! Tested with both perl
5.024 and 5.28:
Code:
[19-03-02 14:36:04.2801] MAIN::INIT (387) STARTING LOGITECH MEDIA SERVER
(V7.9.2, 1550612824, TUE FEB 19
streifenleopard wrote:
> But just like with music stored offline the podcast age seems to be
> over...
What do you mean. Podcasts are more popular than ever. Are you talking
in general or in ability to play on LMS/Squeezeboxes?
*Home:* VBA 4TB (2.4)>LMS 7.9.1>Transporter, Touch, Boom,
digimaster wrote:
> The difference between 2.03.31 and 2.03.35
> Is that /proc and /sys went from read and write to read only.
>
> And thats should not be a problem occurding to me.
> You could try in ssh shell, stop LMS.
> mkdir -m 0755
>
Thanks for the suggestion ! I unplugged the wifi card (didn't manage to
unplug the antenna wires - not sure if possible) but to no avail.
What I notice also is that if I wiggle the 5V power plug in the
Squeezebox, I can trigger a reboot as well, so it looks like a bad
contact. However, while the
A question, in LMS must /proc be read or read/write.
For now i have it read only, to block anything from LMS writing in
/proc.
Greetings Ruud
mherger wrote:
> > Thanks Michael, gone have a look and that. Another question does LMS
> > need the /proc, /tmp and /sys directories?
>
> /proc is
d6jg wrote:
> You can re-order them in MySqueezebox.com - I don't think images are
> supported
Thanks d6jg. I managed to sort this out by manually editing above
mentioned file. Images would greatly enhance the user experience. This
is also true for some more advance podcast features (mark as
The difference between 2.03.31 and 2.03.35
Is that /proc and /sys went from read and write to read only.
And thats should not be a problem occurding to me.
You could try in ssh shell, stop LMS.
mkdir -m 0755 /proc
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/.config/LMSROOT/proc
mount -o
digimaster wrote:
> Oké then it has some thing to do with perl 5.28. Strange one should
> think works the same.
>
> Send from my mobile Phone
He didn't say he already tested it.
Playing of Radio Paradise AAC 320/128: Works fine with v.2.03.31 & perl
5.28.
Now trying ~40 & perl 5.024 & 5.28
Is there any chance that you have 2 different scrobbling clients
enabled?
You log sample does not (to me) appear to show the same track being
scrobbled more than once.
Can you post an extract from your logs of all lines with
"submitScrobble" (at least enough to show duplication)?
Paul
digimaster wrote:
> Suggestion have a good look at the log, and look for the entry before a
> error, mostly that what causing the error. In the log it says missing a
> file, command.
>
> The same with the radio stream, it's gives a bit implemented yet. Try
> the perl 5.24, another hat trouble
That is indeed what it SHOULD be, but this should not result in
definitive double scrobbles (image below). So there are actually three
submission moments: the first is now playing (I can also see that on
last.fm), but after refreshing TWO definiteve scrobbles on last.fm
(below).
If no one else
JaMo wrote:
> I will do. Thanks again for the work.
> /JanOké then it has some thing to do with perl 5.28. Strange one should
think works the same.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly
dolodobendan wrote:
> I don't think it has anything to do with Custom Browse. Erland said
> that's just from 'making the plugin compatible with both SQLite and
> MySQL and this file is only required for MySQL'
>
digimaster wrote:
> Look at your trouble.
> It does not lays in LMS
> But in the plugin CostumScan
> The error
> SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/dbupgrade_valuesort.sql
> No such file or directory
> Its trying to write some thing, which it cant, and then trieds to do
I think that the first one is a "Now Playing" and the second is the
actual scrobble.
If you watch refresh your profile page on Last.fm you should see it
showing what you are listening to as the track starts .. but that is not
the scrobble.
Paul Webster
http://dabdig.blogspot.com
Author Radio
This is a log example.. Don't really know how to read this, but it looks
to me as if the track is scrobbled when half of it is played AND when it
is finished. (instead of .OR.). Still got no clue how to solve this.
Code:
[19-03-02 11:12:14.1040]
35 matches
Mail list logo
