Re: [freenet-support] Help neeeded
Thank you, thank you! I did what you recommended (re-install with version .07) and now it works fine. I was finally able to download/send messages. Additional question though: during the Frost installation it said that because there were apparently more than one node in force, the persistence would not be available.. What does this mean and how can I possibly check the number of nodes registered. In effect, as fas as I know,, I only have one Freenet running... Thx again for your help! G Date: Thu, 28 Oct 2010 08:31:35 -0500 From: apos...@peculiarplace.com To: support@freenetproject.org Subject: Re: [freenet-support] Help neeeded -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Guillaume LEROY wrote: Hello! I have installed Freenet (0.7.5 version #1296 rbuild01296 Freenet-ext version #26 r23771) running on Vista 32 and it seemed to be working OK. I mean I have a node ID and I can navigate and download from FMS with no problem. However, when I try to send a message to a forum (Test as a matter of fact...), it does appear in the inserted list, but NOT on the forum itself afterwards (even after more than 24 h)... I also have the same problem with Frost. If I post to a board (Newbie-help would you believe..) my message stalls in the outbox until a message states that it was not possible to send it. Also, may be for the same reason, all of the boards indicated in the left window show 0 messages. If i click on any of them, nothing happens, even I if I hit refresh... For information, when I installed Frost I checked the box running Freenet .05 instead of .07 because I am on Opennet and not Darknet.. I can't speak for Thaw or FMS but the problem with Frost is that you made the Freenet 0.5 choice when installing Frost. Regardless of whether you're using Opennet or not you are still running Freenet 0.7 and should select 0.7 during Frost's setup. The 0.5 network *IS* still active but you are running 0.7 and will never be able to connect to it unless you install 0.5 Many many thanks if you can help me. Cordially Guillaume PS: by the way, same thing with Thaw... No messages sent nor received.. - -- Freenet 0.5 alternative download http://peculiarplace.com/freenet -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQEVAwUBTMl7N3V+YnyE1GYEAQhUHQf+PyHoYLIH2idrGqnYASS2oXhB/0QeQa2w IhjAoYlAG0TUaEJ3kpp/3Gmytj4in/IpyqU6q2Ch1Mbh9Ndc2+P7u9P469yswf10 O3vjkOO6VaOyTbZ9OZv71DMkWNQiIfNicf+2HSCq10QG4L+TKNZaEDmcd3+Ha1q3 Eh0oHOLL2jOQoU0NjbK0fobg4QhTIjoik/yYAgbhhqy52AYvb98kI/1+XluuEOGv uZnyAgkcTVzxuMQnWe2ntthZQfaDsAOI/akTLUbkzLoiN6zwSoS74A24ute5aeFt 7E9W3G4OPOnIPRnAo31fE5WHyAPfx98wilwEBtrUMjx+9ZVNUUlQ1g== =5wOf -END PGP SIGNATURE- ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] Help neeeded
Hello! I have installed Freenet (0.7.5 version #1296 rbuild01296 Freenet-ext version #26 r23771) running on Vista 32 and it seemed to be working OK. I mean I have a node ID and I can navigate and download from FMS with no problem. However, when I try to send a message to a forum (Test as a matter of fact...), it does appear in the inserted list, but NOT on the forum itself afterwards (even after more than 24 h)... I also have the same problem with Frost. If I post to a board (Newbie-help would you believe..) my message stalls in the outbox until a message states that it was not possible to send it. Also, may be for the same reason, all of the boards indicated in the left window show 0 messages. If i click on any of them, nothing happens, even I if I hit refresh... For information, when I installed Frost I checked the box running Freenet .05 instead of .07 because I am on Opennet and not Darknet.. Many many thanks if you can help me. Cordially Guillaume PS: by the way, same thing with Thaw... No messages sent nor received.. ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Help neeeded
On 28.10.2010 13:15, Guillaume LEROY wrote: Hello! I have installed Freenet (0.7.5 version #1296 rbuild01296Freenet-ext version #26 r23771) running on Vista 32 and it seemed to be working OK. I mean I have a node ID and I can navigate and download from FMS with no problem. However, when I try to send a message to a forum (Test as a matter of fact...), it does appear in the inserted list, but NOT on the forum itself afterwards (even after more than 24 h)... I also have the same problem with Frost. If I post to a board (Newbie-help would you believe..) my message stalls in the outbox until a message states that it was not possible to send it. Also, may be for the same reason, all of the boards indicated in the left window show 0 messages. If i click on any of them, nothing happens, even I if I hit refresh... For information, when I installed Frost I checked the box running Freenet .05 instead of .07 because I am on Opennet and not Darknet.. Many many thanks if you can help me. Cordially Guillaume PS: by the way, same thing with Thaw... No messages sent nor received.. It is possible that the board you were sending on frost is under a DoS attack, this may prevent the message from being inserted. As for FMS, it's some weird WoT thing, you many need to rate some people's trust lists up or something in order to see your own messages. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Help neeeded
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Guillaume LEROY wrote: Hello! I have installed Freenet (0.7.5 version #1296 rbuild01296 Freenet-ext version #26 r23771) running on Vista 32 and it seemed to be working OK. I mean I have a node ID and I can navigate and download from FMS with no problem. However, when I try to send a message to a forum (Test as a matter of fact...), it does appear in the inserted list, but NOT on the forum itself afterwards (even after more than 24 h)... I also have the same problem with Frost. If I post to a board (Newbie-help would you believe..) my message stalls in the outbox until a message states that it was not possible to send it. Also, may be for the same reason, all of the boards indicated in the left window show 0 messages. If i click on any of them, nothing happens, even I if I hit refresh... For information, when I installed Frost I checked the box running Freenet .05 instead of .07 because I am on Opennet and not Darknet.. I can't speak for Thaw or FMS but the problem with Frost is that you made the Freenet 0.5 choice when installing Frost. Regardless of whether you're using Opennet or not you are still running Freenet 0.7 and should select 0.7 during Frost's setup. The 0.5 network *IS* still active but you are running 0.7 and will never be able to connect to it unless you install 0.5 Many many thanks if you can help me. Cordially Guillaume PS: by the way, same thing with Thaw... No messages sent nor received.. - -- Freenet 0.5 alternative download http://peculiarplace.com/freenet -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQEVAwUBTMl7N3V+YnyE1GYEAQhUHQf+PyHoYLIH2idrGqnYASS2oXhB/0QeQa2w IhjAoYlAG0TUaEJ3kpp/3Gmytj4in/IpyqU6q2Ch1Mbh9Ndc2+P7u9P469yswf10 O3vjkOO6VaOyTbZ9OZv71DMkWNQiIfNicf+2HSCq10QG4L+TKNZaEDmcd3+Ha1q3 Eh0oHOLL2jOQoU0NjbK0fobg4QhTIjoik/yYAgbhhqy52AYvb98kI/1+XluuEOGv uZnyAgkcTVzxuMQnWe2ntthZQfaDsAOI/akTLUbkzLoiN6zwSoS74A24ute5aeFt 7E9W3G4OPOnIPRnAo31fE5WHyAPfx98wilwEBtrUMjx+9ZVNUUlQ1g== =5wOf -END PGP SIGNATURE- ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
