On 29 March 2011 11:55, Dave Schmidt dvs...@gmx.com wrote:
Hello everyone,
I have my Freerunner connected to the PC via USB cable. SSH terminal is open.
I want to access the phone via serial interface (to flash osmocombb firmware).
Could/should the same usb cable be used for that? I have
On 20 February 2011 23:12, Dima Sorkin dima_na...@013net.net wrote:
Hi.
If it seems that the below questions are general Linux WiFi or
networking questions without Freerunner specific issues/hacks, please
feel free to redirect me to relevant manuals.
(1) It is sometimes more convenient for
On 10 February 2011 08:42, dukelec d...@dukelec.com wrote:
duke@dukelec:~$ ssh root@192.168.0.202
root@om-gta02 ~ # export DISPLAY=:0
root@om-gta02 ~ # echo qvga-normal /sys/bus/spi/devices/spi2.0/state
-sh: can't create /sys/bus/spi/devices/spi2.0/state: nonexistent directory
root@om-gta02
[I posted this to shr-user already and wanted to put it onto the
openmoko-wiki, but there's the real place for some trivia. I also
could not crosspost because I have 2 different mailaddresses for the
lists. Sorry if you receive this twice.]
I just finished Gibson's Zero History, and I was curious
On 12 October 2010 20:18, gai boger bebe...@hotmail.com wrote:
...
It seems that the problem is apparent only with the NOR u-boot and I've
tried several ways and I can't flash a new kernel to the NAND.
Forgive me if I hadn't done my homework and looked throughly through the
wiki pages but is
On 11 October 2010 13:21, gai boger bebe...@hotmail.com wrote:
It seems that the partition name Kernel in the nand no longer exists.
Using dfu-util, it doesn't recognize the name, and when I use
dfu-util -a 3
then it says it writes to an UNDEFINED partition, and at the u-boot it
says that
I cannöt connect to the above site. A traceroute jumps from
hetzner.de(??) to openmoko.org and is looping there.
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
On 4 October 2010 13:50, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
Joachim Ott jo.o...@googlemail.com writes:
SHR uses fso-gpsd. There is no need to use hexdump for /dev/gps, it's
Afaik fso-gpsd does not read from /dev/gps but instead relies on some
lower level daemon to actually fetch
On 4 October 2010 10:00, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
James Hiebert ja...@hiebert.name writes:
we can rule out kernel bugs. Where's the next place to check?
The gps daemon you use. I use gpsd. I'm not quite sure what daemons
SHR includes.
SHR uses fso-gpsd. There is no
On 13 September 2010 00:03, forestmountain forestmount...@gmail.com wrote:
Hi.
My Freerunner (SHR Illume) has started to shut down after running approx 8
min. I have no idea why this is happening. I haven't installed anything on
the FR. SHR install is 6 months old and has worked fine until
On 6 September 2010 13:20, Patryk Benderz patryk.bend...@esp.pl wrote:
Dnia 2010-09-06, pon o godzinie 15:32 +1200, Robin Paulson pisze:
according to this page, i can possible receive and send pxt (mms)
messages. is this correct?
if it matters, i'm on 2degrees new zealand
sarcasm? :)
On 13 August 2010 12:20, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
Harshil Anil Kumar Shah harshil_s...@infosys.com writes:
My EAP-TLS testing is being done successfully on FR. But I want to
know the latency of its each step. So I want to install wireshark or
any other packet capture
On 9 August 2010 07:32, Harshil Anil Kumar Shah harshil_s...@infosys.comwrote:
Hi,
I am really sorry for unnecessary mail chains for previous problem “Display
not working”.
I will take care of it next time.
--
Actually,
I am trying to test EAP-TLS on FR. So when I run
Try echo 200 /sys/class/backlight/gta02-bl/brightness. Does that help?
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
On 6 August 2010 14:07, arne anka openm...@ginguppin.de wrote:
http://catb.org/esr/faqs/smart-questions.html
isn't there an equivalent for smart answers?
most of the 12 mails were caused by people just throwing in their 2c w/o
requesting further information.
A symptom/cure database is
On 10 July 2010 04:42, Yaroslav Halchenko
site-openmoko@onerussian.com wrote:
On Fri, 09 Jul 2010, Joachim Ott wrote:
I had the same problem with the new shr-unstable image. I got me some
assist data from u-blox and fed them into /dev/ttySAC1. It still took
khm... would you mind sharing
On 10 July 2010 15:48, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
some cleanup but the information you need is there. Anyone using a FR
device and wanting
to use the GPS should be using this. There's even a version for Android
The alternative is to keep GPS constanly on but in low power
On 9 July 2010 01:18, Ben Ruhnow b.ruh...@web.de wrote:
Thanks,
my commandline was:
dfu-util -a kernel -R -D /path/to/uImage
dfu-util -l shows:
Found Runtime: [0x1d50:0x5119] devnum=5, cfg=0, intf=2, alt=0, name=USB
Device Firmware Upgrade
Can you try to flash the kernel from the booted
On 9 July 2010 21:00, Yaroslav Halchenko
site-openmoko@onerussian.com wrote:
some times, and seems whenever I don't allow it to sleep after reboot,
it does manage to acquire time, but still doesn't see satellites
On Fri, 09 Jul 2010, Yaroslav Halchenko wrote:
Running SHR, recently
On 8 July 2010 20:19, Ben Ruhnow b.ruh...@web.de wrote:
Hello,
today I tried to flash a kernel to my moko (GTA02). Dfu-util showed: No
such Alternate Setting: kernel. I flashed my moko a hundred times
before. Is it bricked ?
What was your commandline? Does dfu-util -l show multiple
I disassembled the FR (see pictures at http://www.1qaz.de/usb-fix/ ),
2 of the 4 fixations were loose. I was able to solder it and it's fix
again now. But it's just like before, I can move the plug to the left
and to the right while it's plugged in (the jack is also fixated thru
the case, it
On 6 May 2010 16:21, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
Joachim Ott jo.o...@googlemail.com writes:
thought perhaps the CPU or the RAM is faulty. Is there a little image
I could boot from and that does extensive CPU and RAM testing (similar
to memtest), and maybe tests other
Could it be that the usb jack is already worn out after 1,5 years?
I've made a short video:
http://www.1qaz.de/usb_worn_out.mov (4,5 MB)
I can move the plug a bit to the right and the LED goes off, there's
also a notice in the logfile:
2010.05.05 15:44:30.845 oeventsd.fso_triggers INFO
On 29 March 2010 13:09, Iurii y...@reverseenterprises.com wrote:
sorry my mistake:)
i wanted to say FR
i wondering if you can suggest me any distro which is going to support some
sort of printing devices.
* maybe you had a practice with that and you are able to suggest a model of
a
On 29 March 2010 13:22, Timo Juhani Lindfors timo.lindf...@iki.fi wrote:
Iurii y...@reverseenterprises.com writes:
i wanted to say FR
FR can act as a USB 1.1 host. Unless your printer explicitely wants
USB 2.0 it should work.
i wondering if you can suggest me any distro which is going to
It seems I have this now then after a reboot. Should I worry about that?
messages:Mar 25 15:24:46 gta02v6 user.notice kernel: [ 435.72]
JFFS2 notice: (468) check_node_data: wrong data CRC in data node at
0x0b3d2414: read 0x4455d30b, calculated 0x501c2d9d.
messages.0:Mar 23 18:21:25 gta02v6
On 4 February 2010 04:21, Jonathan Schultz jonat...@imatix.com wrote:
Hello,
Since I only ever boot my freerunner under Debian I do get pretty sick
of having to play with the boot loader menu every time I boot. It's
especially painful when the freerunner has crashed to the boot process
does
2010/1/3 Konstantin chaosspaw...@gmx.net:
Adrian Carrera wrote:
I recomment that you try and keep the fat16 size and choose the size for
the ext2 and ext3 that fits your needs. Try to use the ext2 for the
filesystem.
I hope this can help you.
Thanks for the advice, I will try this first
2010/1/1 Konstantin chaosspaw...@gmx.net:
Good morning and a happy new year!
I have a weird problem when trying to boot from my shiny new Sandisk 16Gb
µSDHC:
I made a single partition on it and created an ext3fs on it, to which I copied
the contents of the tarball for my fabourite
2009/12/20 Thomas Franck thomas.fra...@gmx.com:
David Fokkema wrote:
So... what images did you flash? I've seen this on my FR with some
images. When I tried UBIFS images, for example, I got the CPU stall. I
simply took that as non-working UBIFS, but I'm not sure. When I
reflashed with
2009/12/20 Thomas Franck thomas.fra...@gmx.com:
Joachim Ott wrote:
2009/12/20 Thomas Franck thomas.fra...@gmx.com:
One other thing I noticed in your log:
[21474537.74] nand_read_bbt: Bad block at 0x0202
That bad block is within the rootfs, I hope that it is remapped correctly
2009/12/18 François-Léonard Gilbert gilbe...@gmail.com:
Yeah, I tried to get a new one, but UPS is a problematic carrier and
Tuxbrain's bank dislikes my Visa card :-(
Is there a user group near you on this page:
http://wiki.openmoko.org/wiki/Openmoko_Local_Groups
2009/12/11 François-Léonard Gilbert gilbe...@gmail.com:
I tried that technique last night, and while I did wake the battery
up, it was not enough to start the phone.
What I did:
1) get 4 1.2v AA batteries in series with a resistor and a LED (for
visual confirmation and current limiting)
2)
2009/12/1 François-Léonard Gilbert gilbe...@gmail.com:
Hi all,
I think I killed my battery by plugging my Freerunner in a car
charger. The thing was supposed to be OK, but well. I know for sure
I can't keep a charge in the battery, not even enough to boot up.
What type of charger is that?
2009/11/27 Sven Hartrumpf hartru...@gmx.net:
Hi all.
I'm sorry. I searched around but could not find the right page:
How can I setup the Freerunner (SHR of 2009-09) as a modem for a laptop
(so that the Freerunner acts like a surfstick or similar)?
Depends on what communication method
Apart from CellHunter, you have information from frameworkd:
grep ogsmd.device /var/log/frameworkd.log
And at least for Germany, you can find out cell information from the Reg-TP:
http://emf.bundesnetzagentur.de/gisinternet/index.aspx
___
support
2009/11/20 Iurii y...@reverseenterprises.com:
arne anka wrote:
netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.0.202 0.0.0.0 255.255.255.255 UH 0 0 0
usb0
192.168.0.0 0.0.0.0
2009/10/20 Matthias Huber matthias.hu...@wollishausen.de:
...
just for clearness: is the boot - partition different from the rootfs ?
and how are the other partitions ?
/dev/mtd0 is the 2 MB NOR flash that contains the NOR bootloader
/dev/mtd1 - mtd6 are the 256 MB NAND flash, the names and
2009/10/20 Matthias Huber matthias.hu...@wollishausen.de:
Joachim Ott schrieb:
2009/10/20 Matthias Huber matthias.hu...@wollishausen.de:
...
just for clearness: is the boot - partition different from the rootfs ?
and how are the other partitions ?
/dev/mtd0 is the 2 MB NOR flash
2009/10/19 Sven Hartrumpf hartru...@gmx.net:
Hi all.
I am running a recent SHR version.
I can charge only till 66%, than the POWER led turns from
red to blue and the charge level does not change.
Should I change something to get 100% ?
This is for SHR only: there was some disagreement
2009/10/18 François-Léonard Gilbert gilbe...@gmail.com:
Hi all,
I'm not used to Linux in general, so you will have to excuse the basic
Linux question: how do I configure my FR to automount ALL my SD
card's partitions at boot?
Setup: I have QtMoko in NAND, and 2 partitions on my SD card:
2009/10/18 Atilla Filiz atilla.fi...@gmail.com:
On IRC, I asked someone to
dd if=/dev/mtd0 of=nor.img
for me. Does that work? The link in the wiki page is dead.
If the file is about 2 MB big (mine is 2.097.152 bytes), that should be it.
I always flash my kernel and rootfs from NAND u-boot
2009/10/18 Timo Juhani Lindfors timo.lindf...@iki.fi:
Joachim Ott jo.o...@googlemail.com writes:
I never heard that you can flash from NAND boot menu. Can you take a
picture of the boot menu and put it somwhere on the web (like
imageshack.us or so)?
You configure the u-boot menu to have any
2009/10/12 Nils Bokermann openm...@bermuda.de:
Al Johnson wrote:
On Thursday 08 October 2009, Nils Bokermann wrote:
Hi!
Hi!
I'm trying to get my Neo running with shr. Whenever I'm trying to type
in my password (consisting of upper and lowercase letters) I can use the
shift key on the
This is how it's looking over here with a working wifi. You still
haven't told, if the wlan driver is builtin or a module.
[21474742.365000] s3c2440-sdi s3c2440-sdi: powered down.
[21474742.365000] s3c2440-sdi s3c2440-sdi: powered down.
[21474805.675000] s3c2440-sdi s3c2440-sdi: host detect has
2009/9/28 edgezorz edge.f...@gmail.com:
the search for ar6000 returned nothing, i'm not sure if its supposed to be a
module in the fso release or not though, i checked the modules directory and
there were modules for other stuff. Perhaps i should put shr on my
freerunner to check
I have it
2009/9/28 Thomas Franck thomas.fra...@gmx.com:
maybe it just needs reflashing?
Nope.. flashing was good (no error condition).. but it doesn't boot.. :(
After flashing, did you boot from nand bootloader (by pressing just
the power button) or did you boot from nor boot menu? Maybe you need
to
I don't know if your kernel has the wlan-driver builtin or as module
(try: find /lib/modules -name ar6000.ko) If it is shown, try modprobe
ar6000. Then check dmesg | grep AR6000, does that give you some
messages? Is the interface eth0 shown in cat /proc/net/wireless?
Look at http://www.1qaz.de/loose-sim.jpg - I can move the sim-card
back and forth in the slot (about 0,25 mm?). On the other side of the
sim I've marked the area where the upper two contacts go, they are
very close to a border. Could this be the reason that I get this GSM
not available, try again
2009/9/10 Al Johnson openm...@mazikeen.demon.co.uk:
On Thursday 10 September 2009, rakshat hooja wrote:
On Tue, Sep 8, 2009 at 8:20 AM, Wolfgang Spraul wolfg...@qi-
hardware.comwrote:
Rakshat,
Actually Mplayer plays the MP3 with the user installed plugin
(libmad
or
2009/8/23 cayeya cay...@yahoo.com:
Hi, I have a problem, my om2009 flashed into Nand partition is now with some
files version conflict (for using copy/paste of differents version of files
into user/lib - my mistake -() that makes the distro start with out the
graphical part. Due to the lack
2009/8/20 Seth Rothenberg s...@pachai.net:
My wife's Motorola phone died.
I'm not ready to sign a new contract,
so I need to push the Free Runner from
eternal TEST into PRODUCTION. (Today?)
I like SHR (have been using Testing),
but it hasn't made phone calls recently,
certainly not since
2009/8/15 Rask Ingemann Lambertsen ccc94...@vip.cybercity.dk:
On Tue, Jul 21, 2009 at 07:47:45PM -0400, Seth Rothenberg wrote:
I can't access my SD card.
[...]
Apologies for not spotting the mistake until now, but:
r...@om-gta02 ~ $ fdisk /dev/mmcblk0
Unable to open /dev/mmcblk0
You
2009/8/11 Tim Sterk t...@tim-sterk.nl:
Thanks for your help,
any chance, you'd tell us, _what_ you do exactly?
from your description it is rather hard to infer your steps.
___
support mailing list
support@lists.openmoko.org
2009/8/9 Maximilian Loy maximilian@gmail.com:
The reason is that i have a modified u-boot in NAND and that i want to use
the NOR to load the battery. Thats why i need to increase boot menu timeout.
So the only thing is to connect the debug board and saveenv will be able
to write to NOR?
2009/6/27 Chris Wright dhase...@gmail.com:
My Freerunner was acting fine until yesterday. Now, it refuses to boot
while not connected to a USB charger -- the power button does nothing.
When connected, it starts booting, but stops and turns off about five
seconds after showing the splash screen
2009/6/17 Adolph J. Vogel ajvo...@gmail.com:
I know this has been discussed on the mailling list ad nauseam. But after
several days of trying to get it working with the information on the wiki and
in the mailling list I`m reaching the point of utter frustration. I`m
wondering if there is
2009/6/14 Linus Gasser ine...@markas-al-nour.org:
Dear all,
I'm trying out the Android Koolu beta 7 version from
http://freerunner.android.koolu.com/release-files
Unfortunatly it always tells me SD card not mounted. So I tried the
following command, as noted on some wikis and
2009/6/12 Thomas Franck thomas.fra...@gmx.com:
Joachim Ott wrote:
hcidump is in this package:
http://shr.bearstech.com/shr-unstable/ipk/armv4t/bluez-hcidump_1.42-r0_armv4t.ipk
Yeah.. found that.. :) thank you..
Any idea what to do with the dump file? it's not really human-readable
2009/6/9 Ilya Platonov ilya.plato...@gmail.com:
My FR just couldn't power up in both NAND and NOR alike. Absolutely no
sign of life. Prior to that i flashed the NAND nandwrite -p /dev/mtd1
u-boot.bin and shutdown, but this couldn't ruin the NOR afaik.
Check if you can get it to work again with
2009/6/10 Ilya Platonov ilya.plato...@gmail.com:
Battery was at full charge. A couple of hours without the battery solved
the problem - now i can power it up.
But i discovered that u-boot_env is blanked. Now i seek a way to mend that.
I've used the uboot-envedit (came with debian for the neo)
2009/6/10 Ilya Platonov ilya.plato...@gmail.com:
First of all i need right mtdparts. I can't find any info on default
mtdparts for GTA02. Besides the default is not the best solution because
there are differences even between same models. The most simpleradical
solution seems to copy NOR uboot
2009/6/5 Lars Nooden lars.cura...@gmail.com:
I've just tried putting Qi and androidfs-koolu-beta3.jffs2 onto my
Freerunner.
http://freerunner.android.koolu.com/release-files
Qi seemed to work fine with Om2009 testing.
However, Android only partially boots and I'm unable to get the
The original cells are labeled GP192, searching the web I found
equivalent cells labeled LR41 AG3. But when I put 4 of them into the
stylus, the laser beam was very weak and became weaker very fast. Is
this cell type not suitable for the stylus?
I bought this button cells in a set, 6 different
2009/6/2 Robin Paulson robin.paul...@gmail.com:
2009/6/2 Al Johnson openm...@mazikeen.demon.co.uk:
On Tuesday 26 May 2009, Robin Paulson wrote:
there's no incentive i can see to stay with uboot
You probably don't have 4 different distros on your SD then ;-)
no, i don't.
but it doesn't
2009/5/31 Paul pault...@gmail.com:
Hey All
I have a sd card with 1 particition (4gb). I booted up and it seems that
OM2009 mounts /dev/mmcblk0 to /media/mmcblk0 even though it's not in fstab.
I want to mount /dev/mmcblk0p1 to /media/card cause I have my GPS maps and
my root home directory
2009/5/31 Robin Paulson robin.paul...@gmail.com:
can anyone tell me, if the structure of ipk packages, is the same as
the structure of deb packages? they look very similar. is it the same
compression method?
The ipk-file is a simple ar-archive (man ar). You usually find this in an ipk:
2009/5/28 Werner Almesberger wer...@openmoko.org:
Your device seems to see a lot of activity. Are you moving it around
when these things happen ? Also, are there any other anomalities,
such as crashes, sudden shutdowns, or battery issues ?
Usually, the FR is laying behind me, connected to the
2009/5/27 Werner Almesberger wer...@openmoko.org:
Joachim Ott wrote:
What is mmc1?
That's your WLAN module. It's strange that it would change from working
(associating) to failing like this (no response to SDIO) within just
two seconds.
Your log shows the wall charger getting plugged
mmc0 is the micro-SD card, as shown in /var/log/messages:
May 25 20:26:20 gta02v6 user.info kernel: [21474539.17] mmc0: new
high speed SDHC card at address d555
May 25 20:26:20 gta02v6 user.info kernel: [21474539.29]
mmcblk0:mmc0:d555 SU08G 3.60 GiB
Actually the size is 8 GB, but it
I have this in /etc/wpa_supplicant/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
ssid=Penguin in Bondage
psk=2b86c9451800da3b6c003fc4aa23f89ec8ad0ca822334088093443384944572a
proto=WPA RSN
key_mgmt=WPA-PSK
auth_alg=OPEN
See the excerpt from /var/log/messages below. Normally the AR6000
disconnects every 20 minutes from the AP and reconnects immediately -
sometimes it goes out of order tho. Look at 13:03:17 - the next
disconnect should happen around 13:17:20, this is much too early. And
the reconnect is about 60
2009/5/1 Johny Tenfinger seba.d...@gmail.com:
opkg update; opkg upgrade
Storing GPRS data in SHR Settings was implemented about week ago :P
My last upgrade was on Apr 28. But I did it just some minutes ago. In
the settings, I can edit APN, user and password, and there is a
connect button. No
2009/4/30 David Garabana Barro da...@garabana.com:
O Xoves, 30 de Abril de 2009, Konstantin escribiu:
Now that I have GPRS working - is there any way to make the SHR settings
program remember the APN and passwords? Right now, I have to reenter those
every time I connect, and I'm afraid to
2009/4/19 Alok G. Singh alephn...@hcoop.net:
Robin Paulson wrote:
minimo worked pretty well for me, alhough there are a few annoying bugs
I did try to install it but there were some dependency issues. libxi6
(iirc). Where did you install minimo from ?
I'm still using the old version from
2009/4/8 Konstantin chaosspaw...@gmx.net:
Hi there,
I hope someone can help me with that. I'd love to raise the nice-value of
apps I
start (for example mplayer), but I can't find the nice binary on SHR testing.
Any hints as to where to get it? In Ubuntu/Debian, it's in the package
2009/4/7 Seth Rothenberg s...@pachai.net:
Is there a USB hub that is recognized by Freerunner?
I think the one I have is not recognized by FR or Ubuntu.
FR is a piece of hardware, ubuntu is software, are you running ubuntu
on freerunner or ubuntu on PC? If your usb hub does not work with your
2009/3/11 max csy0...@googlemail.com:
I flashed FSO 5.1 (back after several months) and it works quite well.
However, when I attempt to SSH into my Freerunner, I get a Permission
denied (publickey,password) after I enter the password. Assuming that
root ssh is disabled, I tried creating a user
2009/3/10 Pietro m0nt0 Montorfano mont...@gmail.com:
Il giorno lun, 09/03/2009 alle 23.48 +0200, Timo Juhani Lindfors ha
scritto:
Pietro \m0nt0\ Montorfano mont...@gmail.com writes:
Sooo, how it's that possible?? Why can't we simply patch the driver
which make the mmcblk device to let us
2009/3/9 Seth Rothenberg s...@pachai.net:
Have you already tried opkg install bash? It's available for various
distributions.
Yes, thanks.
r...@om-gta02 ~ $ opkg install bash
An error ocurred, return value: -50512.
I think I am running SHR testing
uname -a
Linux om-gta02 2.6.28-rc4 #1
2009/3/9 Seth Rothenberg s...@pachai.net:
I really would like to run bash.
Google doesn't know of an existing repository for bash.
Does anyone else know?
Have you already tried opkg install bash? It's available for various
distributions.
___
support
2009/3/5 Daniel Benoy dan...@benoy.name:
I'm setting up roaming.
For roaming you need different directives in /etc/network/interfaces
and an additional program (ifplugd). I made a few tries in the old
shr-testing with not much success so far. I'll try again when I'm done
flashing and
2009/3/5 Daniel Benoy dan...@benoy.name:
Also, I rebooted the thing and it got an IP just fine. (!?) Also I see that
it got alerted through the wpa_cli action stuff at boot time just like I was
expecting it to do earlier...
I'm working on the theory that the timeout in wpa_supplicant is
2009/2/28 Steve Leung sjle...@shaw.ca:
Hi. I hope someone can help here...
My FreeRunner can't charge its battery. Even when plugged in to USB or
the wall, the phone can't/won't charge. Eventually the battery
discharges completely and although I have an external charger, this
isn't good.
2009/2/19 Paul pault...@gmail.com:
Has anyone given any thought about embedding a solar panel into the back
cover of the OpenMoko devices?
I'm certain other modifications are necessary.
This is an area I am interested in helping out with. Anyone have expertise
in this area to see if this
2009/2/26 xChris ch...@c-64.mobi:
I like too that idea, after I read about the Samsung solar powered phone...
http://www.telegraph.co.uk/scienceandtechnology/technology/mobile-phones/4641867/Mobile-World-Congress-Samsungs-solar-powered-phone.html
ooo LINK ooo
I heard about that model too, it
2009/2/18 lakshmikanth t.lakshmika...@gmail.com:
I get a ppp0 connection when i followed the steps given in
http://wiki.openmoko.org/wiki/GPRS_FSO for connecting to GPRS.
But i cannot access internet from GPRS, i cannot even ping any website/IP.
DNS automatically comes up when i use
I bought an adapter 12V = USB for the cigarette lighter in the car so
I can charge the FR while driving. The standard charging at 100 mA is
too slow. Are there any objections that I charge at 500 or even 1000
mA?
___
support mailing list
2009/2/13 Cédric Berger cedric.berge...@gmail.com:
On Fri, Feb 13, 2009 at 16:41, Joachim Ott jo.o...@googlemail.com wrote:
I bought an adapter 12V = USB for the cigarette lighter in the car so
I can charge the FR while driving. The standard charging at 100 mA is
too slow. Are there any
2009/2/12 Bilal Mehdi bilal.me...@yahoo.com:
...
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40021000
syscall_983045(0x400210d0, 0x400210d0, 0x68c, 0x400217a8, 0x40024060, 0,
0x60, 0xf0005, 0x566c, 0x608, 0x40024000, 0xbeabcb6c, 0, 0xbeabc840,
2009/2/7 Alex (Maxious) Sadleir maxi...@gmail.com:
It happened to me once too! Australian 240V plug.
On Sat, Feb 7, 2009 at 5:54 AM, Chris Syntichakis ch...@c-64.mobi wrote:
Hi,
I had a nice experience with the power adaptor. I just charged the FR and
after this, I took of the adaptor from
2009/2/4 Oleg Sadov sa...@linux-ink.ru:
...
# iwconfig eth0 essid my-wifi
After that system hangs up and blinking by red LED in AUX button.
Seems like restricted key is key point for this situation -- with open
key all works good.
Can someone try to reproduce this situation? May be
2009/2/4 Dylan Semler dylan.sem...@gmail.com:
...
r...@om-gta02:~# ifup eth0
WPA: Configuring Interface
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not
2009/2/3 Seth Rothenberg s...@pachai.net
Thanks. With these entries, I still have OM not always
setting up the usb interface right, but now that I know
how to use terminal with kbd, I can just
ifdown usb0; ifup usb0
I remember a ppp start script with a 'ifdown usb0' as first action -
or was
2009/2/3 Seth Rothenberg s...@pachai.net
Thanks for the great replies...
I flashed my FR to SHR today.
I had a few instances of it freezing during boot.
Then it seemed to be up, but I had 2 issues:
1. In Terminal, I get no keyboard.
(I guess that's my punishment for complaining
about not
2009/2/1 Seth Rothenberg s...@pachai.net
I bought a 4gb SDHC card, and it is not recognized.
I thought I read on this list that it is supported.
Is there something I need to do before fdisk?
Change your /etc/syslog.conf to values like this to preserve more messages:
DESTINATION=file
2009/2/1 Seth Rothenberg s...@pachai.net
Dear friends,
I'll be travelling and thought I would bring along FR.
I'm considering which distro to bring.
All of the below work with SHR-testing (the wifi gets stuck sometimes)
I hope to have
*phone - even if it's just to know when I
have to
2009/2/1 Jeffrey Ratcliffe jeffrey.ratcli...@gmail.com
2009/1/31 Andy Green a...@openmoko.com:
Ext3 is better IMO because it can soak up a lot of casual damage that
ext2 can't. With my usage pattern I am randomly powering things off all
the time I appreciate how ext3 never makes any
2009/1/24 quat...@gmail.com
You should use a version of mplayer that has
glamo support. Then scaling is handled by the
glamo and you will notice a huge difference.
http://wiki.openmoko.org/wiki/Video_Player
Yes, with that version it's much better now. And the load goes up to 0.7
only.
2009/1/23 Craig Woodward wo...@rochester.rr.com
Joachim Ott jo.o...@googlemail.com wrote:
The first try was with the quicktime-movie on the SD card.
I've found on similar devices (keep in mind the FR is only a 400Mhz device)
that I have to drop the frame rate to something like 15 or so
1 - 100 of 163 matches
Mail list logo