can we ensure this person is in a router list i have ordered new routers
should be here next week
On Thu, 2007-04-19 at 17:05 +0100, Barry O'Donovan wrote:
Joan Vaughan called to request a service call regarding her radiowave
account.
She was connected to radiowave yesterday morning until
i beleive you might find this is an mtu issue with vmware on vlan
interfaces have had it happen to our selves as well
On Fri, 2007-03-09 at 19:16 +0100, Joseph Favia Jr. wrote:
Hi,
This worked fine when I was using a switch with no VLAN configuration ,
but as soon as we defined VLANs on the
i would do the latter and leave the parent interface with no ip address
On Thu, 2007-02-22 at 16:12 -0400, Esteban Zarikian wrote:
Hi, I was wondering, if I'm going to use one NIC for access to 5 VLANs
through a 802.1q trunk, what is the proper way to access the native
VLAN in PFSense.
I am
Maybe a little more information pppoe server or pppoe client
From: Toha Supriyadi [mailto:[EMAIL PROTECTED]
Sent: 09 January 2007 05:19
To: support@pfsense.com
Subject: [pfSense Support] pppoe for multiple subnet
i use pppoe on pfsense, but i clone my
Is the radius assigned ip different subnet from the local db one
-Original Message-
From: Hans-Peter Rienecker [mailto:[EMAIL PROTECTED]
Sent: 24 November 2006 18:45
To: support@pfsense.com
Subject: [pfSense Support] Problems with PPTP-VPN and RADIUS
Hi all,
i've a strange problem
We run shaping and pppoe server on wraps with 128MB ram with about 50
users
Per board with 20 % cpu and 30 % ram.
Have been running pfsense on these boards since very eary alphas
-Original Message-
From: rabbtux rabbtux [mailto:[EMAIL PROTECTED]
Sent: 24 November 2006 02:50
To:
Does anyone run the ubiquity cards successfully with good power output
on pfsense.
We are seeing very poor power control with cm9's on pfsense release-1.
Rssi is 6-10 dbm less that staros or MikroTik on the same hardware.
We had not tried ubiquity cards as we had understood there was a
Embedded update does not include new binarys. Recent update of openntpd
was not included in the mini update
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Message-
From: Holger Bauer [mailto:[EMAIL PROTECTED]
Sent: 10 October 2006 09:27
To: support@pfsense.com
Subject: RE: [pfSense Support] embedded update problem
You have apply each of the updates (a-b-c-...). RC3b includes the
openntpd update.
Holger
-Original Message-
From: Alan
@pfsense.com
Subject: RE: [pfSense Support] embedded update problem
I'm confised now too, you never mentioned running the developers edition
and building your own images ;-)
Holger
-Original Message-
From: Alan Walters [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 10, 2006 10:48 AM
with a 33
megabyte update file.
On 10/10/06, Alan Walters [EMAIL PROTECTED] wrote:
Embedded update does not include new binarys. Recent update of
openntpd
was not included in the mini update
-
To unsubscribe, e-mail: [EMAIL
Been looking at the ath hal version on pfsense and considering testing
latest version from sam but can not seem to find how to add this into
our
Build routine.
We are running 0.9.16.16 in pfsense and 0.9.18.0 is the latest. How
could we add this into our Own build environment please
Ok ta
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 05 October 2006 17:34
To: support@pfsense.com
Subject: Re: [pfSense Support] re: ath-hal
Newest version will not apply to 6.1, it is meant for RELENG_6/FreeBSD
6.2.
Scott
On 10/5/06, Alan Walters [EMAIL
October 2006 19:10
To: support@pfsense.com
Subject: Re: [pfSense Support] re: ath-hal
On 10/5/06, Alan Walters [EMAIL PROTECTED] wrote:
Been looking at the ath hal version on pfsense and considering testing
latest version from sam but can not seem to find how to add this into
our
Build routine
I see some changes made to the cvs recently potentially
allowing wraps to be updated.
Was looking through the builder_scripts but did not
see a script for full-updates on wrap.
Was I deluding myself here. Anyway am going to work
on this for a while hope some input comes back on this
Don't' use internet explorer???
You need to not double click on the update on click once and open then
upload the data
-Original Message-
From: Nelu Sofrone [mailto:[EMAIL PROTECTED]
Sent: 31 August 2006 12:12
To: support@pfsense.com
Subject: [pfSense Support] Firmware update - not
I don't see this problem with multiple people with connecting to vpn
across nat on ptpp. Am I missing something here I just tested it and all
works fine
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 22 August 2006 13:50
To: support@pfsense.com
Subject: Re:
Subject: Re: [pfSense Support] quagga
On 8/18/06, alan walters [EMAIL PROTECTED] wrote:
Scott I see you are looking at the quagga package we have been running
this
on our embedded build for some time if you need some assistance with
it
please let us know
Actually I could use a little bit of help
Scott I see you are looking at the quagga package we
have been running this on our embedded build for some time if you need some
assistance with it please let us know
Just wondering about this recompilation of mpd the feb 2006
version against releng 6.0 seemed very stable pppoe seems
To be not as good against this version sorry for the delayed
testing on this. Is there a way to check the flags that where used in the
Compling of this version compared
Same here have ired this forsome time with
no success
From: Rob Terhaar
[mailto:[EMAIL PROTECTED]
Sent: 02 August 2006 18:35
To: support@pfsense.com
Subject: Re: [pfSense Support] USP
NAT Reflection
On 8/1/06, Scott
Ullrich [EMAIL PROTECTED]
wrote:
On 8/2/06, Tim
Where would we find out about this redistribution agreement this is the
first that I have heard mentioned of it since we started with pfsense on
the fork from monowall.
Would love some clarification of what this means
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Mtu issue most likely, we see this problem also if the client
continues to authenticate
Without waiting.
Is this on a wired port???/
From: juan pablo burd
[mailto:[EMAIL PROTECTED]
Sent: 11 July 2006 14:17
To: support@pfsense.com
Subject: [pfSense Support] PPPOE
Server
with winpoet
De: alan walters [mailto:[EMAIL PROTECTED]
Enviado el: Martes, 11 de Julio de
2006 01:12 p.m.
Para: support@pfsense.com
Asunto: RE: [pfSense Support]
PPPOE Server
Mtu issue most likely, we see this problem
also if the client continues to authenticate
Without waiting
address translation (NAT), the device might not be functioning properly. If
the device provides firewall capabilities, the device might be blocking the
connection. Consult the documentation for the device.
From: alan walters
Sent: 11 July 2006 17:40
To: support@pfsense.com
Subject
This is a known windows issue
Check out pppoe on win 2k and xp have to edit the registery to fix this.
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 11 July 2006 18:35
To: support@pfsense.com
Subject: Re: [pfSense Support] PPPOE Server
On 7/11/06, juan pablo
Well that is more specifically a question
to ask Microsoft. I can vouch for problems with all windows clients sometimes.
Some work fine some do not. I cant
explain it sorry. You need to align your mru and mtu settings . particularly
the mru
From: juan pablo burd
/conf/packages
This used to work but now it only adds the last one. Can any one shed
some light. The packages are installed on the build machine and are in
/var/db/pkg
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
Fax (00353) 65 7077 107
Lo Call 1890 AILLWEE
Thanks will try it
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 09 July 2006 21:55
To: support@pfsense.com
Subject: Re: [pfSense Support] builder scripts
overwrites.
You want on the 2nd and third package.
On 7/9/06, alan walters [EMAIL PROTECTED] wrote:
I
Just wondering weather the freesbie2 cvs is available
again.
Would really like to make an embedded build on rc1
Ry pinging from the wan in the pfsense gui to the next hop maybe you
have a cable wrong or something else silly that we all do sometimes
-Original Message-
From: Eric W. Bates [mailto:[EMAIL PROTECTED]
Sent: 10 April 2006 22:31
To: support@pfsense.com
Subject: [pfSense Support] dumb
In the advanced tab of the web gui then restart your pfsense
Box
-Original Message-rt yur pfsense box
From: Paul W [mailto:[EMAIL PROTECTED]
Sent: 16 March 2006 21:53
To: support@pfsense.com
Subject: [pfSense Support] ssh access and pppoe
2 questions
1. I changed admin access to
Generally a bad CF card
From: Tim Chapins
[mailto:[EMAIL PROTECTED]
Sent: 15 March 2006 13:38
To: support@pfsense.com
Subject: [pfSense Support]
embedded image fstab error during build
I'm getting error below when building embedded...image builds and boots
but to
select the PPPOE (ng)
interface or you can't select the physical interface?
--Bill
On 2/27/06, alan walters [EMAIL PROTECTED] wrote:
There is no faculity in the nat to allow the interface pppoe
configured
To nat outbound connections. Could someone suggest a change
Alan Walters
Aillweecave
. Am I close?
--Bill
On 2/27/06, alan walters [EMAIL PROTECTED] wrote:
Yep that is the problem. Sorry bad syntax on my behalf.
That is the problem.
You cannot port forward pppoe interface to a port.
We are not actually forwarding proxy info we are forwarding smtp
traffic.
Sorry
make this part of the squid package and have an interface selection
for which interfaces to redirect.
--Bill
On 2/27/06, alan walters [EMAIL PROTECTED] wrote:
Physhical interface.
Like redirect lan to squid server.
Redirect all pppoe_clients to squid server
-Original Message
server1xx.xxx.xx.xx8/server
secretSxxxH/secret
enable /
accounting /
/radius
remoteip1xx.xx.xx.128/remoteip
localipxx.xx.xx.1/localip
modeserver/mode
interfaceopt2/interface
n_pppoe_units25/n_pppoe_units
/pppoe
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph
Dual wan load balanced internet access.
Just wondering wheather there is any status on this.
We would love to deploy this very soon. But on tests today it does not
seem to work correctly.
I used the following for my how to
Setup the pools
visit services - load balancer
delete any pools that
Interesting no opt1 route there
Only static routes
My subnets are /29 so maybe the same issue or similar
-Original Message-
From: Ben Browning [mailto:[EMAIL PROTECTED]
Sent: 17 February 2006 17:34
To: [EMAIL PROTECTED] are /29
Subject: Re: [pfSense Support] load balancing wa
Can you
a shell to find out:
fetch -o /etc/inc/pfsense-utils.inc
http://pfsense.com/cgi-bin/cvsweb.cgi/~checkout~/pfSense/etc/inc/pfsens
e-utils.inc?rev=1.316.2.60;content-type=text%2Fplain;only_with_tag=RELEN
G_1
On 2/17/06, alan walters [EMAIL PROTECTED] wrote:
Interesting no opt1 route there
Only
Could you clarify wheather the procedure is correct and I have answered
my questions right at the bottom. I will look at it again in the morning
Setup the pools
visit services - load balancer
delete any pools that are there that do not work
add a new pool and call it loadbalancetowans or
: [pfSense Support] developer image creation
You're setup is not being sync'd. Not sure why however.
On 2/14/06, alan walters [EMAIL PROTECTED] wrote:
When creating a new image at the moment the version tag is showing up
as
Prebeta1 28-01-06
But in the releng 1 branch the version tag
When creating a new image at the moment the version tag is showing up as
Prebeta1 28-01-06
But in the releng 1 branch the version tag is beta2
Does anyone have an idea of what could be going on here
-
To unsubscribe, e-mail:
He documentation says the sis driver has altq support.
But is there no support in pfsense for vlans ??
I thought we had implemented this??
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
Fax (00353) 65 7077 107
Lo Call 1890 AILLWEE
soon. I've got a project at work
where I'll need to replace a Cisco 4000 with OpenBGP.
On 2/12/06, alan walters [EMAIL PROTECTED] wrote:
Just wondering if there is much interest in dynamic routing in pfsense
Do many pfsense users use pfsense in larger network environments??
I am wondering
to the feedback
alan
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
Fax (00353) 65 7077 107
Lo Call 1890 AILLWEE
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL
on Mon Dec 26 03:18:19 UTC 2005
Can you provide a simple HOWTO configure a PPPOE server with PFSense
with radius server? What attributes return the ip address? is it
FRAMED-IP-ADDRESS?
Thanks for all
K.
Le jeu 26/01/2006 à 21:05, alan walters a écrit :
Your config looks a bit odd.
You seem
: 16 January 2006 17:53
To: support@pfsense.com
Subject: Re: [pfSense Support] build_embedded.sh
These files are in RELENG_1. Not sure what you mean, Alan.
On 1/15/06, Rajkumar S [EMAIL PROTECTED] wrote:
alan walters wrote:
It seems that the real solution is to add the files in question
@pfsense.com
Subject: Re: [pfSense Support] build_embedded.sh
alan walters wrote:
Seems like all the wrap specific stuff is moved out of
/home/pfsense/pfSense when build_embedded.sh is run
Use the following script to regenerate them
#!/bin/sh
# Prepare an for an embedded rebuild
Seems that is is not possible to add url aliases
Please entr in the correct format. This would be a top feature for 1.0
release and it looks so close to being done.
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
Fax (00353) 65 7077 107
Lo Call 1890
Have tested this any which way but. Please enable it then check
/var/etc/mpd/mpd.conf it does not use 0.0.0.0/0 as the ip of the link or
add any of the attributes.
The same was when the option is unticked.
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
or www.test.com/myaliases.txt
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 15 January 2006 19:12
To: support@pfsense.com
Subject: Re: [pfSense Support] url aliases
This already exists in HEAD. It will be included in 1.1.
On 1/15/06, alan walters [EMAIL
Perfect. Thanks
Works like a charm
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 15 January 2006 19:29
To: support@pfsense.com
Subject: Re: [pfSense Support] ip addresses from radius.
Just found the problem and tested it.
On 1/15/06, alan walters [EMAIL
Just wondering how I can stop the cvs from updating before a build.
I want to edit the defulat xml file to allow for automated installs of
our firewall configurations.
Is this possible
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
Fax (00353) 65 7077 107
Seems like all the wrap specific stuff is moved out of
/home/pfsense/pfSense when build_embedded.sh is run
Then when rsync is run again it does not replace the files that have
been moved.
-
To unsubscribe, e-mail: [EMAIL
When running build embedded in the last couple of days it seems that the
cvs has deleted all the wrap specific stuff from the local box
everything looks right on the iso but all the wrap files are missing
from /home/pfsense/pfSense.
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co
Seems like there are three files effected
/boot/kernel.conf_wrap
/boot/device.hints_wrap
/etc/ttys_wrap
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65 7077 036
Fax (00353) 65 7077 107
Lo Call 1890 AILLWEE
It seems on error or when settings are saved there are some bits of the
themining that is in the code rather than in the style sheet can someone
else confirm this.
Would there be plans to clean this up before q release
Alan Walters
Aillweecave Company Limited
Ballyvaughan Co Clare
Ph (00353) 65
If I get some time to be able to sit down and really get into the
webgui before q release I will fix these things, but at the current
time it doesn't seem that I will have any time to do this coming up,
my life is kinda hectic right now.
-Erik
--Original Message--
On 1/11/06, alan
I Agree with bill
good spotting to find the errors.
But that is what beta is about.
ALPHA new features and development
BETA bug fixes and patches
-Original Message-
From: David Strout [mailto:[EMAIL PROTECTED]
Sent: 07 January 2006 10:55
To: support@pfsense.com
Subject: [pfSense
I have been trying to find out why this ticket has been amended I have
seen no ill reports on it and with the addition the initial change I
recommended I works fine.
http://cvstrac.pfsense.com/chngview?cn=9101
-
To
commit
If that is the case then I am backing out the changes.. I put them in
there for you.
On 1/5/06, alan walters [EMAIL PROTECTED] wrote:
I did send an update to the ticket that we applied to this 908 I think
it was. I have seen no posts on the forums or support lists about it
that is why I
to the else statement which is the dynamic allocation from
mpd.
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 05 January 2006 23:18
To: support@pfsense.com
Subject: Re: [pfSense Support] mertits of recent commit
Yeah, that should work
On 1/5/06, alan walters [EMAIL
I sent a post a short while ago about this can someone please update me
if I missed something.
It seems that even when u put a personalalised community string in snmp
still responds on the public string.
I this the way it is meant to act.
Alan Walters
Aillweecave Company Limited
Ballyvaughan
@pfsense.com
Subject: Re: [pfSense Support] pppoe pptp ip addresses allocated by
radius server
Thats how I wanted to do it. I ended up just ditching RADIUS and using
the built in authentication system to hand out IPs to specific people
instead.
alan walters wrote:
Any thoughts on the outline
?
Thanks
John
From: alan walters
[mailto:[EMAIL PROTECTED]
Sent: Sunday, December 18, 2005
6:35 AM
To: support@pfsense.com
Subject: [pfSense Support] Ipsec
issues update
Well
I have got all my tunnels working again. I found that in the mobile clients
section that I needed
: [pfSense Support] pppoe implementation of mpd
What do they do, and why are they needed and in what cases.
On 11/25/05, alan walters [EMAIL PROTECTED] wrote:
Is it possible to incorporate these attrubutes into the mpd pppoe
config.
Or am I missing something and it is already there but not worling
Title: Pppoe and logging
Pppoe server logs seem to show up in the system log. Would it not be better to have these in the ptpp
Section or in there own one.
Also it would be great if the the auth login logout for pppoe logs where displayed like to pptp logs
Alan Walters
Aillweecave
] pppoe pptp ip addresses allocated by
radius server
Thats how I wanted to do it. I ended up just ditching RADIUS and using
the built in authentication system to hand out IPs to specific people
instead.
alan walters wrote:
Any thoughts on the outline that I have updated in the cvstrac To do
I know I have seen a few reports of ipsec issues recently I can
confirm that this problem does seem real to me.
Working configuration
0.95.4 tunnel initiator.
0.89 something client
0.94.12 client
All worked here
As soon as we upgraded a client into 0.95 series ipsec
stopped
Title: Starting mpd with pppoe from the command line
How can I start mpd for pppoe from the command line I have changed some configurations and want to test them
Alan Walters
Aillweecave Company Limited
Ballyvaughan
Co Clare
Ph: 00 353 65 7077 036
Fax: 00 353 65 7077 107
Title: Ntp server
http://cvstrac.pfsense.com/chngview?cn=8356
Are there any plans to addd this to releng branch. Or will it come later.
Would be great for hosts on the lan
Alan Walters
Aillweecave Company Limited
Ballyvaughan
Co Clare
Ph: 00 353 65 7077 036
Fax: 00 353 65 7077
yep
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 15 December 2005 15:53
To: support@pfsense.com
Subject: Re: [pfSense Support] ipsec issues
You simply upgraded and did not reinstall?
On 12/15/05, alan walters [EMAIL PROTECTED] wrote:
I know I have seen
and did not reinstall?
On 12/15/05, alan walters [EMAIL PROTECTED] wrote:
I know I have seen a few reports of ipsec issues recently I can
confirm that this problem does seem real to me.
Working configuration
0.95.4 tunnel initiator.
0.89 something client
0.94.12 client
All worked
Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 15 December 2005 17:40
To: support@pfsense.com
Subject: Re: [pfSense Support] ipsec issues
Reflasing fixes it!?
On 12/15/05, alan walters [EMAIL PROTECTED] wrote:
As an additional note on this wraps(embedded) boxes where reflashed
why my firmware upgrades went without a hitch
and yours required a reinstall.
On 12/15/05, alan walters [EMAIL PROTECTED] wrote:
Well when I flashed a box clean it is ok.
The other ones I have not done anything with yet. It Seems a like a
bit of extranious problem. I am having trouble locking
: [pfSense Support] ipsec issues
Also, on the boxes in question do a uname -a from a shell
What is the output?
On 12/15/05, alan walters [EMAIL PROTECTED] wrote:
Yep it is listening correctly.
The boxes in question can still make tunnels to 0.94.12 boxes
Only a problem starting at 0.95.4
I will look
Funny well at least we are getting to the bottom of it. So reinstall
fresh seems to be the answer
-Original Message-
From: Vivek Khera [mailto:[EMAIL PROTECTED]
Sent: 15 December 2005 19:44
To: support@pfsense.com
Subject: Re: [pfSense Support] ipsec issues
On Dec 15, 2005, at 1:29
Dec 15 10:25:46
racoon: DEBUG: 15503e09 3081b54d 1820e3e8 3256835b
08100501 9641d697 0044 04909587 3d73d865 12ce65fb 37efe8a3 88e4f114
fcbbd77c 56005075 0623b629 206c7c1b fc84f737
Dec 15 10:25:46
racoon: ERROR: ignore information because ISAKMP-SA has
not been
I agree that even after the kernel there is still an issue here as well.
I think that there is a versioning issue with ipsec or something else
odd that we cant see.
I hope to get time to look at it tomorrow
-Original Message-
From: John Cianfarani [mailto:[EMAIL PROTECTED]
Sent:
Title: Embedded image
Seems that the embedded image is in the updates directory. I guess this is just a mistake. Or is this an update
I can confirm if you are using full updates crontab is being updated. Well it
is being replaced on my system. I have some checks that I have to keep
reinstalling in there due to changes
-Original Message-
From: Frimmel, Ivan (ISS South Africa) [mailto:[EMAIL PROTECTED]
Sent: 08
that update_file.sh may actually break your box -
be prepared to fix it (especially if you do an update_file.sh -all).
--Bill
On 12/8/05, Damien Dupertuis [EMAIL PROTECTED] wrote:
Okay,
I'm trying without the Update_file.sh /etc/crontab then...
I'll keep you informed...
Thanks
--- alan walters
When I connect via pppoe server on LAN I can download at 50
KB/sec when on Lan directly I can download at 200KB/sec
This reconciles with my uplink. Can anyone shed some light
on this for me please???
Just trying to get pftpx working over an ipsec tunnel. Even with
all the ftp helpers off it still seems like there is a helper enabled
somewhere.
Can anyone shed some light on how I can configure the
helpers to work correctly.
ftp
pfsense
ipsec tunnel
pfsense
lan
pppoe
Seem to have an issue with disk usage on 0.95a on
embedded platform. Disk useage shows itself as 101%
/27/05, alan walters [EMAIL PROTECTED] wrote:
radius-ip
When using RADIUS for authentication, enable IP address assignment via
RADIUS as well.
From the following man page. Do we think we could add this in to the
pppoe
configuration. Sorry to pester but I did not really get a reply
http
Seem to be having a continueing problem with this. Mini httpd
is running but there is the maximum number of instances running. Even though I can
confirm I have only been connected for a few minites. Netstat then shows about
50 connections from my ip to the pfsense box on the https port.
-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Friday, November 25, 2005 8:39 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] pppoe implementation of mpd
What do they do, and why are they needed and in what cases.
On 11/25/05, alan walters [EMAIL PROTECTED] wrote
Either your LAN or WAN interface doesn't support ALTQ. The wizard
cannot continue.
Using sis Ethernet cards and vlans on all interfaces. I had thought
that the code was committed to allow vlans with altq.
Look forward to hearing wheather this patch should be in pfsense at the
moment or
How can the httpd be restarted from the command line. I attempted
to run the php script from the command line but it failed looking for
credentials.
Interesting I think you are using fxp eth cards??? Is that right.
Mine are sis cards. That seems to be our
only difference.
I am testing on wrap platform have tried on
four different test boxes with four different images.
Using the latest images
with fresh installs now and still the
/23/05, alan walters [EMAIL PROTECTED] wrote:
How can the httpd be restarted from the command line. I attempted to
run the
php script from the command line but it failed looking for
credentials.
-
To unsubscribe, e-mail: [EMAIL
,
it's a known bug that I haven't had time to dig into (and from other
reports, it's purely cosmetic - although you may need to resave the
normal filter policy and apply to force the shaper rules to load)).
--Bill
On 11/23/05, alan walters [EMAIL PROTECTED] wrote:
Either your LAN or WAN interface
if you are looking for something else) you are looking to kill
/restart (unless you already killed it that is)
/usr/local/sbin/mini_httpd -c **.php|**.cgi
-u root -maxproc 16 -i /var/run/mini_httpd.pid
-lsf
From: alan walters
[mailto:[EMAIL PROTECTED]
Sent: 23. november 2005 12:06
To: support@pfsense.com
Subject: Re: [pfSense Support] restarting httpd
Try
/usr/local/sbin/mini_httpd -S -E /var/etc/cert/pem -c **.php|**.cgi
-u root -maxproc 16 -i /var/run/mini_httpd.pid
Notice the |, thats a pipe in shell-land.
On 11/23/05, alan walters [EMAIL PROTECTED] wrote
was the same bug that bit
you ;)
--Bill
On 11/23/05, Scott Ullrich [EMAIL PROTECTED] wrote:
On 11/23/05, alan walters [EMAIL PROTECTED] wrote:
Cool maybe. It is at the end
Hopefully we'll have that fixed soon. Please open a ticket
Running 94.2 the embedded update looks huge tried installing
all the same but gets to 15.83 mb and fails missing or incomplete
firmware
Anyone else??? 128 mb ram wrap platform 128 mb cf card
Memory never goes over 45 percent.
cheers
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Sunday, November 20, 2005 9:28 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] upgrading wrap to 94.4
Fixed. It's making its way to mirrors now.
On 11/20/05, Scott Ullrich [EMAIL PROTECTED] wrote:
Sorry tried
a few different images. Same error.
The
following input errors were detected:
The uploaded image
file is not for this platform (wrap).
1 - 100 of 177 matches
Mail list logo
