>
> > On Jan 1, 2016, at 5:13 PM, Mark Kettenis wrote:
> >
> > Thanks. This strange. I don't quite understand what's happening here
> > as the ACPI MADT table lists the CPUs in the expected order and cpu0
> > attaches as the boot processor.
> >
> > To rule out that the
> On Jan 1, 2016, at 5:13 PM, Mark Kettenis wrote:
>
>> From: Dale Ghent
>> Date: Thu, 31 Dec 2015 15:02:11 -0500
>>
>>> On Dec 31, 2015, at 2:43 PM, Mark Kettenis wrote:
>>>
>>> Can you please send me a dmesg as well as
> On Jan 5, 2016, at 12:05 PM, Mark Kettenis wrote:
>
>>
>>> On Jan 1, 2016, at 5:13 PM, Mark Kettenis wrote:
>>>
>>> Thanks. This strange. I don't quite understand what's happening here
>>> as the ACPI MADT table lists the CPUs in the
> From: Dale Ghent
> Date: Thu, 31 Dec 2015 15:02:11 -0500
>
> > On Dec 31, 2015, at 2:43 PM, Mark Kettenis wrote:
> >
> > Can you please send me a dmesg as well as the acpidump output for this
> > machine? That will give me a chance at figuring
> Read my message again. I'm suggesting to turn xhci off in the kernel,
> not the BIOS.
Alright, so here's an update. This Xeon-D system is able to be booted and
installed using your suggestions:
In BIOS:
CPU Configuration -> Cores Enabled -> set to 1
In UKC:
disable acpi
disable xhci
Here's
> From: Dale Ghent
> Date: Thu, 31 Dec 2015 13:45:49 -0500
>
> > Read my message again. I'm suggesting to turn xhci off in the kernel,
> > not the BIOS.
>
> Alright, so here's an update. This Xeon-D system is able to be booted and
> installed using your suggestions:
>
>
> On Dec 31, 2015, at 2:43 PM, Mark Kettenis wrote:
>
> Can you please send me a dmesg as well as the acpidump output for this
> machine? That will give me a chance at figuring out what is going
> wrong.
Here you go, Mark:
http://elemental.org/xeon-d.tar.gz
/dale
Has anyone used or otherwise been able to boot 5.8 on a Xeon-D 1540 system?
We're experimenting with a SuperMicro Xeon-D 1540 system
(http://www.supermicro.com/products/system/1U/5018/SYS-5018D-FN4T.cfm) and are,
surprisingly, not getting terribly far into the kernel boot process, with a
> From: Dale Ghent
> Date: Wed, 30 Dec 2015 14:49:58 -0500
>
> Has anyone used or otherwise been able to boot 5.8 on a Xeon-D 1540 =
> system? We're experimenting with a SuperMicro Xeon-D 1540 system =
> (http://www.supermicro.com/products/system/1U/5018/SYS-5018D-FN4T.cfm)
I managed to get a slow-motion video of the console and transcribe the first
several lines of CPU setup and probing from a verbose boot. It seems that the
kernel isn't finding a lot of stuff here.
>>> bios probe won
bios0 at mainbus0: SMBIUOS rev. 2.8 @ 0xed8b0 (55 entries)
bios0: vendor
> On Dec 30, 2015, at 3:21 PM, Mark Kettenis wrote:
>
>> From: Dale Ghent
>> Date: Wed, 30 Dec 2015 14:49:58 -0500
>>
>> Has anyone used or otherwise been able to boot 5.8 on a Xeon-D 1540 =
>> system? We're experimenting with a SuperMicro Xeon-D
> From: Dale Ghent
> Date: Wed, 30 Dec 2015 15:35:42 -0500
>
> > On Dec 30, 2015, at 3:21 PM, Mark Kettenis =
> wrote:
> >=20
> >> From: Dale Ghent
> >> Date: Wed, 30 Dec 2015 14:49:58 -0500
> >>=20
> >> Has anyone used or
12 matches
Mail list logo