Re: [Telrad] 4x4

Sent: Tuesday, July 26, 2016 12:26 PM To: telrad@wispa.org Subject: Re: [Telrad] 4x4 On Tue, Jul 26, 2016 at 10:18 AM, Dan Petermann <danpeterm...@me.com<mailto:danpeterm...@me.com>> wrote: Any idea why I am getting the error on one sector? What Topology do you have chosen under Deploymen

Re: [Telrad] 4x4

That is correct. Don't forget to reboot after saving changes. -Original Message- From: telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] On Behalf Of Dan Petermann Sent: Tuesday, July 26, 2016 1:49 PM To: telrad@wispa.org Subject: [Telrad] 4x4 In firmware version 0606.04013,

Re: [Telrad] 4x4 config?

d poking about to be interesting and fun, and also helps me to be more informed (even if just a little bit) about the product. -- Nathan From: telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] On Behalf Of Jeremy Austin Sent: Tuesday, July 19, 2016 9:30 PM To: telrad@wispa.org Subject: Re: [Telr

Re: [Telrad] 4x4 config?

On Tue, Jul 19, 2016 at 7:57 PM, Nathan Anderson wrote: > meaning we would still have to wait for GPS PLL re-lock all over again, > etc. Sounds like you've given a great shot. Since the GPS is a separate device, is it PLL lock that is slow, or that it actively resets the GPS

Re: [Telrad] 4x4 config?

To: telrad@wispa.org Subject: Re: [Telrad] 4x4 config? On Tue, Jul 19, 2016 at 5:39 PM, Nathan Anderson <nath...@fsr.com<mailto:nath...@fsr.com>> wrote: Still, 'twould be lovely if moving forward, Telrad engineering could start working to make settings changes take effect immediat

Re: [Telrad] 4x4 config?

On Tue, Jul 19, 2016 at 5:39 PM, Nathan Anderson wrote: > Still, 'twould be lovely if moving forward, Telrad engineering could start > working to make settings changes take effect immediately upon config commit. Preach it! It's linux, so almost everything *should* be able to

Re: [Telrad] 4x4 config?

On Tue, Jul 19, 2016 at 4:07 PM, Nathan Anderson wrote: > It makes testing or tweaking settings on a Compact excruciatingly > disruptive and time-consuming, since virtually every setting requires a > full reboot in order to take effect. 5+ minutes per change is a long time > to

Re: [Telrad] 4x4 config?

ad-boun...@wispa.org] On Behalf Of Brian Meredith Sent: Tuesday, July 19, 2016 12:02 PM To: telrad@wispa.org Subject: Re: [Telrad] 4x4 config? It seems like it takes a few minutes now for the RAN ports to come up now, it didn't seem like this was the behavior on 2616. Small price to pay for the impr

Re: [Telrad] 4x4 config?

All 4 ports come on at the same time when in 4x4 mode. Topo: Single Carrier 4x4TM4 Advanced RAN: All 4 ports set to Operative Matt Carpenter On Tue, Jul 19, 2016 at 1:42 PM, Jeremy Austin wrote: > > On Mon, Jul 18, 2016 at 9:54 PM, Justin Davis

Re: [Telrad] 4x4 config?

It seems like it takes a few minutes now for the RAN ports to come up now, it didn't seem like this was the behavior on 2616. Small price to pay for the improved signal, I guess! On Tue, Jul 19, 2016 at 11:42 AM, Jeremy Austin wrote: > > On Mon, Jul 18, 2016 at 9:54 PM,

Re: [Telrad] 4x4 config?

On Fri, Jul 15, 2016 at 5:38 PM, Matthew Carpenter < mcarpen...@amarillowireless.net> wrote: > > My issue last week, and hopefully this is fixed now, is after a eNB reboot > the GPS will not init and therefore no S1. However rebooting the EPC will > bring the GPS online and S1 up. I have done

Re: [Telrad] 4x4 config?

his week. Garth - Original Message - From: Matthew Carpenter Sent: 7/15/2016 7:33:02 PM To: telrad@wispa.org;telrad@wispa.org Subject: Re: [Telrad] 4x4 config? > Hey. We have been running 6.6 for about 1 month now.   > 4x4 mode works and you can select it in breezeview.   Saw a 5 dbi