In my experience, it has always taken a variable number of minutes -- sometimes 5 or more -- for the RAN to fine up after a reboot. Even if there is a GPS lock, it still can take some minutes after that before I see "start RF..." "Send Start PHY".
It makes testing or tweaking settings on a Compact excruciatingly disruptive and time-consuming, since virtually every setting requires a full reboot in order to take effect. 5+ minutes per change is a long time to be down. Now it takes even longer? Oof. -- Nathan From: [email protected] [mailto:[email protected]] On Behalf Of Brian Meredith Sent: Tuesday, July 19, 2016 12:02 PM To: [email protected] Subject: Re: [Telrad] 4x4 config? It seems like it takes a few minutes now for the RAN ports to come up now, it didn't seem like this was the behavior on 2616. Small price to pay for the improved signal, I guess! On Tue, Jul 19, 2016 at 11:42 AM, Jeremy Austin <[email protected]<mailto:[email protected]>> wrote: On Mon, Jul 18, 2016 at 9:54 PM, Justin Davis <[email protected]<mailto:[email protected]>> wrote: I decided to upgrade to the newest release and turned on 4x4. Does it take longer for ports 3 and 4 to turn on? When I use Rx only for 3&4, they do light up in RAN. Breezeview says we're in 4x4 mode, but I haven't seen 3 and 4 Tx yet when in Tx mode. I wonder if I'm just missing something obvious. No other switches to twiddle? -- Jeremy Austin (907) 895-2311<tel:%28907%29%20895-2311> (907) 803-5422<tel:%28907%29%20803-5422> [email protected]<mailto:[email protected]> Heritage NetWorks Whitestone Power & Communications Vertical Broadband, LLC Schedule a meeting: http://doodle.com/jermudgeon _______________________________________________ Telrad mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
