In order to avoid a reboot, I have gone so far as to try killing and restarting various processes. (You have to watch out for their "forker"/watchdog process, which will reboot the device if a process that it forked off and is monitoring becomes unresponsive.) But even if I kill off everything and then restart them in the order that 'forker' would have, daemonizing/dispatching them into the background, I can't get everything working again, most likely because of all the crazy interdependencies and low-level hardware init that has to happen in just the right order and such. I have gotten as far as getting ConfD up and running again, and I can interact with it, but it can't talk to the hardware properly after that, and then of course S1 to the EPC never comes back up.
Grr. In fairness, even if I got it working, it probably wouldn't buy me that much time, since it would essentially be starting all of the important bits back up from scratch, meaning we would still have to wait for GPS PLL re-lock all over again, etc. -- Nathan From: [email protected] [mailto:[email protected]] On Behalf Of Jeremy Austin Sent: Tuesday, July 19, 2016 8:01 PM To: [email protected] Subject: Re: [Telrad] 4x4 config? On Tue, Jul 19, 2016 at 5:39 PM, Nathan Anderson <[email protected]<mailto:[email protected]>> wrote: Still, 'twould be lovely if moving forward, Telrad engineering could start working to make settings changes take effect immediately upon config commit. Preach it! It's linux, so almost everything *should* be able to be reloaded except the kernel. -- Jeremy Austin (907) 895-2311 (907) 803-5422 [email protected]<mailto:[email protected]> Heritage NetWorks Whitestone Power & Communications Vertical Broadband, LLC Schedule a meeting: http://doodle.com/jermudgeon
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
