Interesting idea. It might be an interesting experiment to couple a large
number of inexpensive xtals to see how it impacts effects such as sudden
changes in a single xtal.
With sufficient monitoring of each one, you could even tune the coupling to
amplify/attenuate the results of the 'good'
Framing error or override sounds like a parity or stop bit issues. Have you
changed those at all? 7E2 often works when 8N1 is specified.
On Apr 22, 2014, at 10:34, Collins, Graham coll...@navcanada.ca wrote:
Thank you Thomas,
I have that document but it wasn't of much help. I spent much
Well, I built one of the ve2zaz units, and it has a. Pretty well defined serial
interface. On the other hand, the one I use most has a PIC and an LCD, no
serial interface.
On Jun 25, 2014, at 20:10, Bob Stewart b...@evoria.net wrote:
In an offline communication, I suddenly realized that I
Walter,
If the two datachron units and the datum 9300 are still available, I would be
most interested.
Thanks!
Bob
On Jul 8, 2014, at 17:08, walter shawlee 2 walt...@sphere.bc.ca wrote:
(very sorry for the first file size! Here's a smaller one)
Since there were several requests for
Apologies for to those not in New England or not going to the Flea.
I'm heading out to the MIT Flea at oh-freaking-dark in the morning and I know
there are often several time nuts who go. If you happen to see a guy wander by
in a Horton Emergency Vehicles hat looking very tired, say Hi!
Careful Chris, it sounds like you are developing the symptoms of the Vintage
strain of the time nuts infection. Next thing you know, you will be looking at
tall clocks.
Bob, who is debating the wisdom of non invasively synchronizing the family
heirloom tall clock to the new cesium clock...
At that point, why not just remove the few remaining HP parts and put them in a
new enclosure? :)
On Oct 8, 2014, at 10:29, Pete Lancashire p...@petelancashire.com wrote:
One future project would be to replace the front panel with a LCD/Touch
Panel
On Wed, Oct 8, 2014 at 6:56 AM,
Is there a quick and dirty summary of which are the good 10811's? Otherwise,
I clearly need to go through my collection and characterize them! :)
I should probably do that anyway...
On Nov 17, 2014, at 21:50, Bob Camp kb...@n1k.org wrote:
Hi
As best anybody can tell, the improved phase
I read the article and thought it would make for an interesting crowd sourced
project if the sensitivity is large enough to build a distributed sensor
network with GPSDOs.
On Nov 18, 2014, at 17:15, Magnus Danielson mag...@rubidium.dyndns.org
wrote:
Hi Charles and Joe,
Read this,
Comments inline.
On Oct 5, 2012, at 18:26, Hal Murray hmur...@megapathdsl.net wrote:
bow...@gmail.com said:
The problem is that they start in sync and over the course of a day drift
that far apart despite having NTP running. We're not sure why NTP isn't
correcting it along the way.
Boy am I glad I didn't go to either!
On Oct 15, 2012, at 17:30, David I. Emery d...@dieconsulting.com wrote:
In a mad moment at the NEARFest flea this weekend I grabbed
a 5061A for $250. Poor thing was getting wet in the rain and needed
a home. Really really heavy to carry to the car,
By the way, you need not use a USB serial adapter. Several folks are doing PPS
on the gpio pins.
Take a look here
https://github.com/davidk/adafruit-raspberrypi-linux-pps
And here
http://www.frambozenbier.org/index.php/raspi-community-news/4439-george-lu-on-ntp-pps
On Oct 16, 2012, at
+1 please!
On Nov 19, 2012, at 16:23, mcqu...@sonic.net wrote:
MINI-TIC for DMTD work
Hi Everyone!
I've been testing a Miniature 2 channel TIC that Bert Kehren and Juerg
Koegel
and Richard Mc Corkle have designed.
Please add my name to the list!
Thank you,
Dave
You can also overdrive a mmic and get good results. That is what I'm using as
the oscillator for my 1.296 GHz beacon.
Bob
On Nov 27, 2012, at 15:45, Ed Palmer ed_pal...@sasktel.net wrote:
Hi Don,
Yes, I've heard of SRDs. I think every Rb standard uses them. I recently
purchased a YIG
It all depends on what clock your talking about. Any given PC probably has more
than one oscillator onboard.
Generally there will be one for the CPU, one for the display circuitry, and
probably one for the real time clock.
Presuming you are talking about the CPU clock, it should be fairly
I've only been following this thread distantly, however, I have been playing
with arduinos quite a bit of late.
If you wanted to incorporate one as the processor of choice in a new design,
the cost is quite low, under $4.00us for the processor in quantity one. I've
used one in a new design in
That is exactly what mine does when it has marginal power on the 48v input. You
may find that 50-52vdc works.
On Jan 13, 2013, at 0:14, Joseph Gray jg...@zianet.com wrote:
After many years of faithful service, my Z3801A has stopped working.
It seems to be going through a loop at powerup. All
The problem with the Ethernet adapters is the lack of software support on the
OS side. I'd have gone to that long ago if I could point any bit if software at
a serial port that was actually on a terminal server out on the ip fabric.
On Jan 27, 2013, at 12:30, Peter Gottlieb n...@verizon.net
Used is definitely the way to go. My stereo zoom scope was $15!
On Feb 8, 2013, at 16:12, DaveH i...@blackmountainforge.com wrote:
Check to see if there are any tech auctions in your area.
Picked up a nice scope with stand and illuminator for $90 in the Seattle
area.
Dave
On Mar 27, 2013, at 22:54, Jim Lux jim...@earthlink.net wrote:
On 3/27/13 3:20 PM, Bob Camp wrote:
Of course, for the more mechanically inclined.. what about a big flywheel
driving an alternator. You might be able to rejigger a car alternator. I
don't recall how many poles they
Oh, you can do it, but you really need to know what you're doing.
As the prev poster said, it depends on what you are doing. Simple compiles are
straightforward, autoconf if its a bit more complex, use Xcode.
If you are doing work on an app that needs a GUI, Xcode makes it easy.
On May 20,
I use the Arduino as a rapid prototype development platform. I build the
application and the hardware on the Arduino and then move the cpu to a
standalone board. You can also use the Arduino as a programmer much like
someone else suggested.
Bob
On May 26, 2013, at 13:19, Chris Albertson
For making a blinking LEDs, it is hard to beat a 74LS74. However, a PIC, is
probably less expensive! :)
On May 26, 2013, at 13:33, Bob Camp li...@rtty.us wrote:
Hi
If you head over to the auction sites and do a bit of creative digging /
bidding, the Arduino clones are amazingly cheap.
A fine and accurate observation. I've been slowly replacing the loud 110v fans
in my test equipment with new, higher cfm, quiet 12 vdc fans that probably
won't last as long but make it possible to hear in my workshop.
On Oct 21, 2010, at 11:59 PM, Perry Sandeen sandee...@yahoo.com wrote:
And there is your product. The GPSDO derived 44.1 kHz reference!
I only ask for a 10% royalty.:)
On Jun 19, 2013, at 20:54, Tom Knox act...@hotmail.com wrote:
I wonder what is the best way to obtain 44.1KHz from a 5-10MHz reference.
Thomas Knox
Date: Wed, 19 Jun 2013 15:14:17 -0600
There are some good alternatives to krytrons. Just don't expect to be able to
afford or export them. ;)
On Dec 26, 2013, at 21:26, Bob Camp li...@rtty.us wrote:
Hi
Unless you want run for 1 second, that rules out a Krytron.
Length of operation also impacts some of the other
Yup. Once a month. Good sized parking lot plus four or five floors of a parking
garage. Sounds like there were enough T-N there to have had a gathering! :)
I too looked at all the loran units and decided to pass.
III
On Apr 15, 2012, at 17:45, Don Latham d...@montana.com wrote:
Oh, I
WIWAUG (when I was an under grad), it was explained to me that the seismometers
were log scale and basically don't clip. When you get into a big event, the
last few decimal places just don't matter.
We also used differential GPS across known fault lines to measure slip both
over time and
I get my tabbed batteries from Batteries America. Decent prices and good
quality.
On Jul 1, 2012, at 19:41, Dan Rae dan...@verizon.net wrote:
All this discussion of the excellence of these Rb units reminds me that
another cell must have died in my battery pack since the slightest glitch
I understand this event perfectly. Our feline owners leave us presents on an
occasional basis. Usually we find them straight away, but when we can't, ninja
nose wife takes over.
For some reason, however, they tend to only leave the back half of the dead
rabbit. My spouse says it is because
I've oft considered bolting one to the cement wall in my basement, which is a
very nice, very stable 57deg F just to see how it holds.
On Jul 13, 2012, at 14:36, Don Latham d...@montana.com wrote:
You can get one of these at any large truck stop :-)
Don
Peter Gottlieb
Now I
suppose
As someone pointed out, it is dependent on where you are, as well as a number
of other factors.
I've got a nice chunk of concrete tied to bedrock about 10' below the surface
with a thermal variation that is below the threshold of the thermometer i have
there.
Since I need to put something
Interesting that they use jammers. The guys on the ambulances just wrap the
antennas with the foil from burger wrappers or the like.
On Jul 28, 2012, at 0:34, Jim Lux jim...@earthlink.net wrote:
On 7/27/12 6:42 PM, Brian, WA1ZMS wrote:
Does anyone know if there is ANY recent active
Not only do i remember the frozen yellow hose, I still have my vampire tap
drill/tool...now finding it may be another matter...:)
On Jul 30, 2012, at 18:53, Chris Albertson albertson.ch...@gmail.com wrote:
On Mon, Jul 30, 2012 at 12:41 PM, Sylvain Munaut 246...@gmail.com wrote:
10 mHz
Why not just use a raspberry pi? Uses a whole 2w at idle. Ntp might bump that
to 2.01.
On Aug 19, 2012, at 13:06, Chris Albertson albertson.ch...@gmail.com wrote:
This sounds like a newer version of the board I use. The thing to check
is if the CPU heat sink has a fan or not.
counters like on a 45xx board. You also don't have a well tuned ntp
since it's LInux.
Bob
On Aug 19, 2012, at 1:31 PM, Chris Albertson albertson.ch...@gmail.com
wrote:
On Sun, Aug 19, 2012 at 10:16 AM, bownes bow...@gmail.com wrote:
Why not just use a raspberry pi? Uses a whole 2w at idle
Agreed. Just pointing out there isn't a big porting effort to get ntpd itself
up and running.
On Aug 19, 2012, at 22:24, Chris Albertson albertson.ch...@gmail.com wrote:
On Sun, Aug 19, 2012 at 6:49 PM, bownes bow...@gmail.com wrote:
It comes w ntp out of the box if you run fedora
The local sandwich shop that I frequent recently switched to LED lighting. When
I walk up to the counter I can see the flicker when people's hands are moving.
The same applies for LED taillights when a vehicle is moving as well as newer
LED tower lighting.
Bob
On Sep 18, 2012, at 13:15, Hal
Many folks.
The paranoid tinfoil hat crowd
Folks who are concerned that law enforcement has placed a GPS tracker on their
car.
Truckers avoiding log enforcement
Truckers who want to sleep rather than drive.
Ambulance drivers who want to sleep but claim to have been held up at hospital.
BWIWY (back when I was young) we needed a dummy load for a supercomputer (think
Cray YMP size) that drew many many kw.
Our test load was about 250' of 3/4 copper tubing coiled at about 12 dia and
1 spacing. The load was varied by changing where the + and - leads were bolted
onto the coil with
It had to happen eventually. Time Nut interest overlapped with $DAY_JOB.
Due to reasons I really can't go into, a systems user is concerned with the
displacement of two servers from the same pair of stratum 2 NTP servers.
I'm convinced that it really isn an issue as long as the two systems
My educated guess is that they expected to sell these to telcos, who
traditionally run everything in a central office on -48v and running off of ac
was an afterthought.
On Jul 9, 2011, at 9:43, Marco IK1ODO ik1...@spin-it.com wrote:
Hello group,
after many years (about 12, I think) of
I'd love to find a Smiths analogue clock to match the gauges in the dash of my
old British car!
On Jul 16, 2011, at 10:56, Michael Poulos poulo...@gmail.com wrote:
On 7/10/2011 5:04 AM, Javier Herrero wrote:
My car has an interior look similar to this:
Those bolts would be whitworth.
On Dec 15, 2011, at 14:43, Steve . iteratio...@gmail.com wrote:
The laboratory where i work obviously reports results using the SI metric
system. There is one exception though, and that is the energy side,
specifically calorimetry. At first glance the
Imagine a 3d map in which colour represents phase or frequency and Z
displacement of the sample point represents voltage.
Would make for a nice animation anyway.
On Dec 30, 2011, at 17:47, shali...@gmail.com wrote:
The problem is that while the frequency is going to be pretty much the
It is one of those cost/benefit calculations. The cost of sorting the real
gifts from the commerce $100 labeled as gift probably wouldn't pay for itself.
It is, of course illegal. The question is are we better off changing the
enforcement or the law. Not to mention the cost of the latter.
Step one...is the antenna in a location where it can see they sky?
Sorry if it is a stupid question but you already said it was plugged in. :)
On Jan 6, 2012, at 19:24, Don Lewis dlewis6...@austin.rr.com wrote:
Can someone please give me some pointers (my first time with a GPS module).
-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of bownes
Sent: Friday, January 06, 2012 6:49 PM
To: Discussion of precise time and frequency measurement
Cc: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Getting my Rockwell D200 GPS to work
On Jan 13, 2012, at 17:51, Chris Albertson albertson.ch...@gmail.com wrote:
I'm surprised that no one has built a GPIB controller from a uP.
Electrically the GPIB is simple and slow by modern standards.
Several have. That is basically what the prologix is. There is another one you
There was a system in NJ with over 3000 ps2s in a supercomputer config.
The financial industry's idea of high cost is a bit different than most.
The price of your real time ticker feed from the exchanges is directly
proportional to the associated network latency due to speed of light.
Bob
Yup. Between the 1ghz 7000 series, the DSA602 w 1Ghz plug ins, and the 2236
portable I don't expect I'll ever need to buy another scope.
On Feb 17, 2012, at 16:36, J. Forster j...@quikus.com wrote:
Tek went into the toilet when Danaher bought them out.
I bought a TDS1002 and could not
an offer and it's yours after I get time to test is out.
-Brian, WA1ZMS
On Feb 17, 2012, at 4:56 PM, bownes bow...@gmail.com wrote:
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman
Wow. I just save it to an nfs share on the NAS. Then I can get to it from
anywhere in the house/world...
Have not seen anyone use kermit or zmodem orsplit or rar or uuencode for a long
long time.
On Feb 21, 2012, at 18:59, Chris Albertson albertson.ch...@gmail.com wrote:
On Tue, Feb 21,
Don't forget to scare up the appropriate programmer. Those are getting hard to
come by too.
On Oct 22, 2010, at 7:02 PM, Chuck Harris cfhar...@erols.com wrote:
I don't believe the parts are failing due to structural
problems, but rather are just leaking down their buried charge.
It
If you are going to worry about things at that level, then it is not just the
memory devices, you'll be worrying about all the programmable parts such as
PALs, GALs, and other eplds. Then you are really looking fort some exotic
programmers.
Ironically, I bought a standalone programmer many
Precicesly why I have a basement shelf or two dedicated to old datebooks. :)
On Oct 23, 2010, at 12:44 AM, Hal Murray hmur...@megapathdsl.net wrote:
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
This makes me re-think arguing with my wife about tossing the 15 linear feet of
three ring binders full of systems documentation sitting in the basement.
But not for long. I'll keep what I don't have electronically I guess, but the
SunOS 2.2 manual set can totally go in the trash.
The field
Unfortunately, there is no way to restart the kernel without going through a
BIOS re initialization.
Changing the run level restarts the init process but does not reload the
kernel.
On Dec 2, 2010, at 10:17 PM, mi...@flatsurface.com (Mike S) wrote:
Anyone familiar with Linux kernel
Thanks for the correction/education!
On Dec 3, 2010, at 2:17 AM, Christian Vogel vogel...@vogel.cx wrote:
Hi bownes,
Unfortunately, there is no way to restart the kernel without going through a
BIOS re initialization.
actually, there is. It's called kexec.
See, for example http
For me, at least, the purpose is twofold, to learn, and to get a better
instrument. The idea of being able to discriminate between two inputs a few ps
apart is fascinating and something I'd like to learn how it is done.
The VNA is a good comparison. I have a nice scalar nw but would like a
That's kinda my point about using rs232. Serial to USB, serial to Ethernet
adaptors will be available for a good long while.
Also why I like the idea of a standalone instrument that also has a pc
interface of some sort. Or a slot for a pc interface of whatever source I
want.
So how does
I love those Hammond boxes until I have to pay the bill. The one for my n2pk
VNA was about $28.
But one of those as the primary enclosure with input boards and output boards
that plug into a main board would be feasable if a tad expensive.
Some modules lend themselves to plugins on a main
That would all depend upon the interconnect strategy, which hasn't reached
consensus either.
Based on the early module list, a bus probably isn't necessary, and individual
ribbon cable and/or coax will do if speeds stay low.
On Dec 21, 2010, at 2:34 PM, Bruce Griffiths
Greg,
I'm going to be in the area next month and might be able to pick some up and
redistribute them if that is of any assistance.
If I can end up with a clock somehow, I'd be interested in that too.
Bob
On Jan 15, 2011, at 12:33 PM, J. Forster j...@quik.com wrote:
I doubt the shipping
Of the 2 lc orgs I administer or am a member of, and the roughly 8 other lc
orgs I interact with on a regular basis, only one uses lc certified gps equip.
The others are all consumer grade or don't use gps.
However, a slew of filings and letters from the lc community might not be a bad
Sorry. Life critical. Fire, ems, law enforcement, aviation, etc.
On Feb 2, 2011, at 3:37 PM, Rex r...@sonic.net wrote:
On 2/2/2011 2:29 PM, bownes wrote:
Of the 2 lc orgs I administer or am a member of, and the roughly 8 other lc
orgs I interact with on a regular basis, only one uses lc
I've not seen 110v fans in 'ultraquiet'.
On Feb 10, 2011, at 11:37 PM, Rick Karlquist rich...@karlquist.com wrote:
It isn't clear why you need to change to 12V fans.
Why not modern 120V fans?
Rick
___
time-nuts mailing list --
James,
I used an old 1 u server case and it's accompanying power supply. The back
panel was already punched for a db9. All I had to do was drill some holes for
BNC output and sma for the antenna connector.
The big win was the 2x16 backlit LCD panel on the front which I hooked up to a
monitor
Another interesting measurement would be to use the timebase output and
external reference to compare the readings using the same timebase.
Or are you already using a gpsdo?
On Apr 5, 2011, at 12:08 AM, Joseph Gray jg...@zianet.com wrote:
I'm keeping the newbie question in the subject for
the advice. Another question follows in a new post, so as
not to hijack this one. ;)
Bob
On Apr 14, 2011, at 10:07 PM, Gary Chatters gcarlis...@garychatters.com wrote:
On 04/14/2011 02:03 PM, Poul-Henning Kamp wrote:
In messageBANLkTi=upy4x2wumn9rpaw-vreu4yw3...@mail.gmail.com, Bob Bownes
wri
I have this problem as well. The issue is that the USB com port shows up as a
different number sometimes after a reboot and thus I must go in and manually
disable the 'mouse' again.
Quite annoying when trying to set up a system that just boots up and works.
On May 11, 2011, at 9:51, brent
That small hemispherical antenna could also have been 900mhz. I have one here @
home that is a combined gps/900mhz antenna from an ambulance tracking system.
On Jun 10, 2011, at 22:01, Hal Murray hmur...@megapathdsl.net wrote:
li...@rtty.us said:
There's an enormous amount of gear out
On Dec 14, 2014, at 07:42, Dr. David Kirkby (Kirkby Microwave Ltd)
drkir...@kirkbymicrowave.co.uk wrote:
On 14 December 2014 at 11:57, Hal Murray hmur...@megapathdsl.net
redacted
That command works.
How do you reboot - apart from of course powering the thing off?
# shutdown -y
If anyone happens to be looking for a 5061A in the Bay Area this might be a
good deal.
Bob
View item:
HP Agilent 5061A Cesium Beam Frequency Standard
End Time: Feb 20, 2015, 18:32:56 EST
___
time-nuts mailing list -- time-nuts@febo.com
To
Swap the tx and rx lines on the Arduino. Swap back to reconnect to PC.
On Jun 3, 2015, at 10:51, Chris Albertson albertson.ch...@gmail.com wrote:
In the RS-232 world devices are either DTE or DCE. You need one of
each on each end of the line if using a normal straight cable.To
Typically the pins are two or three lengths.
The longest pins are ground, the next are power, then signal pins. Quite often
used for things that are hot swapped. Take a look at a USB cable for example.
On May 29, 2015, at 19:01, Chuck Harris cfhar...@erols.com wrote:
Thees units were
And to tie this back to the UPS thread, at university, the Simplex clock sync
signal made our Vax 11/730 TOD clock run wy fast.
I never figured out if it was using line frequency zero crossings for seconds
or if it was leaking as DEC fixed it not long after it was installed. (And it
was
I just asked over on the HP equipment list, but time nuts had a thread on the
4352 a while back...
Has anyone got a service manual for the 4352A? The B version is out there in
the wild, but the A version seems to have gone MIA.
Additionally, should anyone have either a 11636B power divider
My Google fu is weak tonight.
I'm out in the field getting ready for the ARRL VHF/UHF contest. Thought I'd
bring along the bits for my 10GHz transverter and assemble it during the
downtime.
But I'm being thwarted.
Does anyone have the pinout for the six pin Datum 10Mhz oscillators?
Aside from using the toaster oven reflow controller from SparkFun?
> On Jun 23, 2016, at 21:28, Jay Grizzard wrote:
>
>> On Thu, Jun 23, 2016 at 11:28:00PM +, Mark Sims wrote:
>> A usable re-flow oven can be had for $300.
>
> Do you (or anyone) have
The 8640 will lock to an external 5Mhz reference. That's what the BNC in the
heatsink is for. At least that is where it is on mine.
The trick is doing a good divide by two.
However, that said, the 8640 tops out at ~1024MHz, which if you get interested
in even the lower microwaves, is not
And try to tell transistor A from transistor B from diode C when they are all
upside down.
A moving head design can be made to pick up parts off of reels on all four
sides. But it takes more table space. Which is money.
As someone else said, you need Z rotation, which isn't as easy as it
Has anyone published a summary of the differences between the '71 & '72?
> On Jan 20, 2016, at 15:11, Poul-Henning Kamp wrote:
>
>
> In message <569fde69.2020...@rubidium.dyndns.org>, Magnus Danielson writes:
>
>> Good, then I have not remembered completely
Maybe a krytron? If you are able to get one anyway. ;)
> On Apr 13, 2016, at 18:32, David wrote:
>
>> On Wed, 13 Apr 2016 00:03:03 -0500, you wrote:
>>
>> ...
>>
>> If you are building up something, you probably want a SRD (step
>> recovery diode) or tunnel diode. But
Apologies to those not in or around Boston tomorrow. You can ignore this msg.
I'll be at the flea tomorrow selling off a 5328 with 10811 OXCO & 15GHz
prescaler and a few other goodies.
I seem to recall that there are generally a few of us in attendance. Perhaps we
could have an impromptu
N connectors should never need to 'lubed'. Properly assembled they are
waterproof. Same goes for BNC. That's what the rubber gasket on the mating
surface is for. Metrology grade Ns don't have the gasket but you shouldn't need
it on your metrology bench. :)
That being said, it never hurts to
We've been dealing with speed of light issues for over 20 years in the
financial world. And telecom.
Someone recently built a new fiber route from Chicago to NY because it was just
a touch shorter. The distances are down to hundredths of a ms.
> On Jul 25, 2016, at 17:41, Bob Camp
A second here or there is a very big deal to those of us in the financial and
database worlds.
Aside from the well known instances involving electronic trading I have
customers fighting over cabinet positions and cable lengths to place processors
closer to disk drives and on switch paths
Or the current version:
Large AC motor driving a LARGE flywheel with an AC (and/or -48VDC) generator on
the other side feeding a very large battery plant. If mains drops more than 1/2
cycle it connects the turbine and starts it up.
We had a 5MW one at $OLD_GIG for feeding our supercomputer
There are also some nice cypresses semiconductor parts that are similar and
have a really nice dev environment.
Basically a core surrounded by programmable logic. Code in C ore close to it.
> On Aug 11, 2016, at 07:06, Bob Camp wrote:
>
> Hi
>
> To your earlier point,
To paraphrase a few other folks, taking on the task of building your own, even
using the VE2ZAZ board as a basis is a very educational experience. It will
teach you an enormous amount. There are lessons in control systems, phase and
frequency locked loops, oven controllers, phase and frequency
Comment inline
> On Aug 21, 2016, at 18:59, Dr. David Kirkby (Kirkby Microwave Ltd)
> wrote:
>
> I am not convinced that this is time-nuts related, although I am sure many
> time-nuts either have a VNA or would like one. Such a project needs its own
> forum.
Just shipped out three new systems for $DAY_JOB to Goldstone, Madrid and
Canberra.
Love it when work and time nuts intersect.
> On Sep 13, 2016, at 17:35, Andy ZL3AG wrote:
>
>
> That sounds like fun!
>
> Do they have a mailing list they hang out on?
>
>
Has anyone seen an IRIG-B generator for OS X sound port?
I know there is one for the PC in NTP, but thought I would ask before diving in
to that asp pit.
Bob
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Not to mention there is not so sensitive film, sensitive film and really
sensitive film.
Good old orthographic film took minutes in bright light.
> On Nov 4, 2016, at 20:24, Poul-Henning Kamp wrote:
>
>
> In message
I suspect the multitasking aspect of the OS will give you far more jitter than
one could cope with.
> On Nov 4, 2016, at 22:46, Casey L. Jones wrote:
>
> Maybe you could use something like a serial to parallel converter chip or the
> serial port input of a
Walter,
You can always download VirtualBox and run a Windows system in there under
Linux, OS X, Solaris, or whatever you like. It's free, and it works well.
Oracle VM works too, but is probably overkill.
Bob
> On Dec 1, 2016, at 13:07, walter shawlee 2 wrote:
>
>
Fits very nicely into a 5370 in fact. :)
> On Nov 30, 2016, at 17:12, Graham / KE9H wrote:
>
> The BeagleBone Green is a BeagleBone Black with the HDMI and video chip
> removed.
>
> Mouser Part number *Mouser Part #: *713-102010027, $39, In stock.
>
>
> Makes a great
Lot's of connectors change specification @ 18Ghz or are not rated bast
18Ghz.
On Tue, Feb 25, 2014 at 11:55 PM, Hal Murray hmur...@megapathdsl.netwrote:
jim...@earthlink.net said:
there's a BIG jump in cost when you cross that 18GHz boundary line.
What's magic about 18 GHz? Why not 16
...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of bownes
Sent: April-22-14 10:48 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] hp 54600a and rs-232
Framing error or override sounds like a parity or stop bit issues.
Have you changed those
1 - 100 of 271 matches
Mail list logo