Hello Time Nuts,
Tuesday, January 22, 2019
The Ublox M8T is now fixed! For future reference this is what was
wrong. CSG Shop ship various versions of this GPS module on a generic
board, as far as I can tell, and reading between the lines. Some
versions need this jumper across two of the
Hello Time Nuts!
Sunday, January 20, 2019
Thanks for all the replies, I am now in e-mail contact with Alexander
at the sellers place. He asked last night if there's a jumper on the
underside of the GPS board. At first I thought there was a tiny SMC
resistor or capacitor. It was in an
The official RPi touchscreen mounted in a Smartipi case (with the extended back
cover) works very well. That's how I have my alarm clock configured. The GPS
and a backup battery are mounted in the back cover. I once hacked up a version
of Heather that does the singing clock during the day
On 1/19/2019 5:12 PM, Mark Sims wrote:
For hobby stuff, that's good enough! ;)
Heretic! Burn him! Your time-nut card has been revoked! ;-)
Hahahahahahahaha! :)
Lady Heather supports the Ublox receivers and can set the time pulse
outputs, etc. See the "P" keyboard menu. If Heather
David,
Don't tap the time LEDs.
For InCase series NEO-M8T TIME & RAW receiver board
(https://www.csgshop.com/product.php?id_product=218), access to PPS is
through the 12 pin JST SH socket, its harness or the breakout board it
feeds.
You can see the breakout board's labelled items at
Hi
This has swung over to the “is it legit” / supported question. What’s below is
*only* in reference to that part:
There are various levels of “legit” when it comes to these modules. Some are
100% uBlox produced
units with flash code. Some are equally 100% uBlox, but have the firmware in
Hi Chris,
By query I meant poll settings, sorry.
Your screenshot shows 1MHz configured on TIMEPULSE 2. I don't think it is
going to work.
Standard products used to have 1kHz frequency limit on TIMEPULSE 2. I have not
checked any FTS functionality recently.
The manual (Receiver Description)
Hello David,
Thanks for the reply, it came froma recommended Lithuanian source,
where others have no issues with similar devices. I e-mailed them re
this but got no rely, sadly. Is there any way to interrogate it (not
the suppliers ;)) to see if it's legit?
Thursday, January 17,
17/01/2019 14:42
I have a Ublox NEO-M8T-0-10 that in the OE state shows no output on
TP2. If I programme it with the UCentre software for say 500hZ output
I sill see nothing on TP2. Do I need to pull it high on boot or
anything to see an output please? I am not probing it with a X10 scope
probe
17/01/2019 14:42
I have a Ublox NEO-M8T-0-10 that in the OE state shows no output on
TP2. If I programme it with the UCentre software for say 500hZ output
I sill see nothing on TP2. Do I need to pull it high on boot or
anything to see an output please? I am not probing it with a X10 scope
10 matches
Mail list logo
