Hi Nigel,
Yes, I had tried Tboltmon v 2.60 but probably because it was very late
and a senior moment I didn't notice the GPSTM tab which precisely have
the lights function that I was talking about, thank you for the hint.
The capability of turning the lights is not important, it is just
Hi Ignacio
Your mention of the lights control had me confused for a minute, probably
not that difficult these days:-), because I do remember seeing that so was
wondering if the GPSTM tool had worked for me at one time after all.
However, a search through the various trimble programs
Whoopswill now write 1000 times...I must pay more attention:-)
I see you've already tried Tboltmon, so I presume there must be a bit more
to GPSTM monitor than is obvious from my quick glimpses before it crashes.
Let's see if it will run under Win98..
Regards
Nigel
GM8PZR
Oh well, 0230 is probably as good a time as any to call it quits for the
day:-)
I've now tried Win98 and even loaded Win95 on to an old laptop as that and
NT was what the GPSTM tool was originally intended to run under and it's
still not happy, so it does look to be a non starter, in more
Oops, I meant Mark Sims, sorry.
Ignacio EB4APL
On18/01/2014 15:27, EB4APL wrote:
I have a NTGS50AA working with the Lady Heather last version which
incorporate support for this board (Thanks Mask Sims).
When I bought the board I used the Trimble utility GPS Monitor (GPSTM
Commissioning Tool
Ignatio,
Not exactly what you have asked, but I notice that Trimble Tboltmon
won't connect to a device which requires Odd parity.
You can select Odd parity, but it fails to connect, and the details at
the bottom remain fixed at N,8,1
So for Odd parity I can only use Trimble Studio. I
Ignacio,
The Strangely it worked a couple of times maybe it has auto baud routine
that is active shortly after reset or power on.
Stanley
- Original Message -
From: EB4APL eb4...@cembreros.jazztel.es
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent:
Hi Ignacio
I'm not familiar with the GPSTM tool, trying to run it here generates
exception errors, but from what I see when it's trying to boot it's much the
same format as Trimble's various other offerings.
If you run Trimble GPS Monitor though, version 1.6 was the latest but 1.05
is
I will try it, but always it happened after connecting the serial cable
to the GPSDO that had been on for a long time.
Regards,
Ignacio
On 18/01/2014 17:07, Stanley wrote:
Ignacio,
The Strangely it worked a couple of times maybe it has auto baud
routine that is active shortly after reset
Hi Nigel,
The GPSTM tool (The program identifies itself as GPS Monitor v 1.5, to
contribute to the entropy) also gives the same errors when connected to
my NTGS50AA, caused by bad programming that becomes crazy when listening
to a device that sends data at 9600 Bd, but in the rare occasions
10 matches
Mail list logo