# journalctl -b 0 --grep eno1 | cut -c22-
kernel: igb :02:00.0 eno1: renamed from eth1
systemd-networkd[763]: eno1: Link UP
kernel: igb :02:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: RX
systemd-networkd[763]: eno1: Gained carrier
kernel: IPv6:
It shows
# resolvectl mdns
Global: yes
Link 2 (enp1s0): no
Link 3 (eno1): no
Link 4 (lan): no
Link 5 (finnland): no
Link 6 (docker0): no
Link 8 (veth21cf34c5): no
In other words: No.
--
You received this bug notification because you are a member of
I'm currently away from this particular network for some time, I'm
currently jumping between different countries.
If this just merges these settings into the systemd file generated by
netplan without the need of netplan to be able to deal with mdns, this
should do the job.
But I wasn't aware
Yes. You've missed a point.
If avahi-browse completely fails because of one invalid answer, this
could allow what we call DoS, Denial of Service (Attack).
All those cryptographic verification, bells, whistles can protect you
from communicating with the wrong one, but none of them can help you if
Public bug reported:
I currently ran into the problem, that systemd (i.e. its resolved)
cannot properly configured to run with mdns.
I'm currently setting up some machines in a network with a poor router which
routes and offers DHCP, but does not put the DHCP clients into a DNS domain, so
the
Public bug reported:
Hi,
I have updated several machines from Lubuntu 20.04 to Lubuntu 22.04 with
do-release-update -d
On all but one machine this worked well, but one machine, that formerly worked
without problems, now has no ssh-agent running after login, and the
~/.xsession-errors shows
Bug still exists in Lubuntu 21.10.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1936728
Title:
missing ip v6 link local route by Network-Manager
Status in
Public bug reported:
Hi,
I was analyzing, why all the Ubuntu 20.04 machines in my network can
operate at full ethernet speed over IPv4, but some are significantly
slower when using ipv6.
Short reason: Missing route by Network Manager
long reason description:
I'm using a FritzBox DOCSIS
Oh yeah, that helps! :-)
Uldis, can you confirm?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1910537
Title:
HDMI audio not working on Blackmagic Design ATEM Mini
BTW: what would pulseaudio / ubuntu pass out on HDMI if I do play two
audio sources, one with 44.1 and one with 48 kHz, at the same time?
Any tool or method to check what's going out to HDMI?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which
I think I've found the problem.
@Uldis: please check and verify
It doesn't work with a video with
Channel(s) : 1 channel
Channel layout : C
Sampling rate: 44.1 kHz
but it works when playing a video with
BTW, same with the older ATEM Mini (non-Pro)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1910537
Title:
HDMI audio not working on Blackmagic Design ATEM Mini Pro
Confirmed:
distorted sound on HDMI1
no sound on HDMI2-4
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1910537
Title:
HDMI audio not working on Blackmagic Design
Pretty good hint, interesting.
However, the ATEM is definitely able to take audio in on all four HDMI
ports, since it has level indicators and buttons to turn it on and off
(and AFV=Audio follows Video) and adjust the level on all four HDMI
ports.
And I do have a camera with a builtin Mic (GoPro
> Please try running this command:
> xrandr --output HDMI-1 --set audio on
> If it still doesn't work then try logging in again after that.
Neither did help...
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio
Public bug reported:
This is a complicated thing. I have a very specific problem with audio
output on HDMI.
I want to use an older notebook with Lubuntu 20.04 as a video source for
libreoffice slides, videos etc. to feed them over HDMI into a Blackmagic
Design ATEM Mini Pro ISO (video mixer) as
Public bug reported:
Hi,
yeah, it's not yet a bug, but it will become a (security) bug within
lifetime of 20.04 if not 'fixed'.
Currently openssh for Ubuntu 20.04 is still on 8.1p1, while upstream the
version 8.2 has just been released:
https://lists.mindrot.org/pipermail/openssh-unix-
Network-Manager just sabotaged my VPN connection.
It used the (expired one-time-)password it stored in the keyring several
times again to try to login, until the server blocked the account due to
too many login failures.
--
You received this bug notification because you are a member of Ubuntu
Public bug reported:
Hi,
when configuring a VPN connection (openvpn) with the Network-Manager
applet (LXDE) even when leaving the password empty Network Manager
insists on putting the password into the keyring and to reuse it, even
if this does not make sense and causes an error message on the
Public bug reported:
Hi,
rsyslog comes with a rabbitmq output module included in the source, but
although the debian build scripts do create lots of packages and
modules, they do not create the rabbitmq module. See
https://www.rsyslog.com/doc/v8-stable/configuration/modules/omrabbitmq.html
Public bug reported:
Hi,
I'm trying to use a Teemi TMSL-50 bluetooth barcode scanner (in keyboard
emulation mode) with a USB bluetooth dongle in an 18.04 machine, which
used to work some months ago.
Now I can still pair them, the ubuntu machine sees the devices and lists
as paired, but can't
Public bug reported:
Hi,
I'm currently trying to debug why my Bluetooth Barcode scanner
(emulating a keyboard) with a USB bluetooth dongle does not work anymore
with my 18.04, can't connect it anoymore (it used to work at lease
occasionally months ago.) It pairs, but can't be connected as a HID.
That's a long list of EPERMs in strace and mostly useless by itself,
since chrome make use of nonblocking/asynchronous IO, so you always have
to look for the syscall that had caused the EPERM. A full trace is
rather huge.
In case you have a yubikey (not just a regular u2f oder blue yubikey, they
Public bug reported:
Hi,
some months ago (can't give a precise date) I could use all my pure u2f
tokens, as well as Yubikey tokens with mixed apps (yubikey 4, yubikey
neo) pretty well with chromium browser as u2f tokens.
For some months now and since an update of the chromium-browser in
18.04,
As mentioned in the upstream bug, they plan to add support in openssh
8.0.
But I guess 18.04 won't get the upgrade from openssh 7.x to 8.0.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
** Attachment added: "alsa-info output"
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1812567/+attachment/5230734/+files/alsa-info.txt.mql2KR8jRa
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in
** Attachment added: "pulseaudio verbose output"
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1812567/+attachment/5230733/+files/pulseverbose.log
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in
Public bug reported:
Hi,
I have a AIO computer with builtin analog speakers and headphone plug, both
working for years, also under 18.04, after countless reboots.
Now I had a hard reboot after the machine had crashed.
Now the speakers remain silent. Plugged in headphones still work.
- I've
dnsmasq _after_ networking?
Isn't it part of networking and should be running and ready for other
services depending on networking?
(my guess is that Ubuntu has never defined the targets very precisely. it
should distinguish between low level /interface level configuration and
networking
setting optional: false does not solve the problem, a systemctl
restart dnsmasq is still required.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dnsmasq in Ubuntu.
https://bugs.launchpad.net/bugs/1777094
Title:
dnsmasq
So it is not possible to have an interface as optional (for other
reasons beyond that example) and still have a dnsmasq running for it?
In former versions of ubuntu I had my bridges (some containing usb
ethernet interfaces to bridge virtual with physical machines) configured
in
** Summary changed:
- dnsmasq startet too early, not getting all ports
+ dnsmasq started too early, not getting all ports
** Summary changed:
- dnsmasq started too early, not getting all ports
+ dnsmasq started too early, not getting all interfaces
--
You received this bug notification
** Attachment added: "dnsmasq parameters for virtual lan"
https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1777094/+attachment/5152990/+files/vlan0
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dnsmasq in Ubuntu.
** Attachment added: "netplan example"
https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1777094/+attachment/5152989/+files/60-vlan0.yaml
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dnsmasq in Ubuntu.
Public bug reported:
Hi,
I'm still struggling with 18.04 and the move from ifupdown to netplan.
I am running a local virtual linux bridge as a network for several
virtual machines and containers, which is to be serviced with dhcp and
dns by dnsmasq.
Conforming to latest designs from Ubuntu the
Ooops, no, sorry, it works (/tmp/a was missing).
So the kernel is definitely able to mount the file systems, it's just
that ecryptfs-utils and their key management do not work.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
Even a direct
mount -t ecryptfs -o
ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs
/tmp/work /tmp/a
fails with
[-2] No such file or directory
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
Please keep in mind that ecryptfs-mount-private and
mount.ecryptfs_private are slightly different things.
Since ecryptfs-mount-private is a frontend to the underlying
mount.ecryptfs_private, and this isn't working either (also not under
18.04), it is vital to focus on fixing that.
I found that
ecryptfs (private mount) still does not work under 18.04.
That's a complete showstopper for the upgrade 16.04->18.04 because access to
encrypted files becomes impossible or at least troublesome.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
Public bug reported:
Hi,
I've installed Lubuntu 18.04 and found that problem:
the display-manager service complains:
● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; indirect; vendor
preset: enabled)
Active: active (running) since Wed
Public bug reported:
Hi,
the openldap server slapd comes with two configuration options, the old
one based on slapd.conf, and a new one based on ldifs.
The debian/ubuntu package performs some obscure magic to generate a ldif
based config in /etc/slapd/slapd.d, but does not provide any hint or
Public bug reported:
Hi,
I have configured a linux bridge (vlan0) for virtual machines in
/etc/network/interfaces.d/vlan0. The usual configuration including to
start dnasmasq as a dhcp and dns server for that network.
With 17.10 that fails, systemd can't start networking.service
# systemctl
Public bug reported:
Hi,
systemd still kills the swap device sometimes.
I typically avoid lvm and prefer the partition scheme like
/dev/sda1 unencrypted boot
/dev/sda2 luks-encrypted swap
/dev/sda3 luks-encrypted /root
and haven an /etc/crypttab like
sda2_crypt
Public bug reported:
Hi,
since upgrading to 17.04 I can't connect to bluetooth headsets anymore.
Headsets are found and listed as devices, but when trying to connect,
there's an error
blueman.bluez.errors.DBusFailedError: Protocol not available...
syslog says:
May 3 16:43:12 pcdanisch
Public bug reported:
Hi,
just ran into a problem:
I have some software dealing with openssl and some crypto stuff. I
recently extended it to read bytes from /dev/hwrng if it exists, because
the software should run on a Raspberry Pi as well. The Raspi does not
have a clock and usually no user
Public bug reported:
Hi,
I was just debugging why so many of my virtual machines have so much trouble in
getting DNS responses and found, that the dnsmasq on the host machine, which is
the DNS resolver for all machines asks the three (!) name servers given in
/etc/resolv.conf, which is the
Public bug reported:
Hi,
I'm happy to see that there is some progress about automounting
removable devices with zfs, but when I plug in a pendrive with zfs, I
still get the error message
Error mounting /dev/dm-2 at /media/danisch/sync2: Command-line `mount -t
"zfs_member" -o
Public bug reported:
Hi,
I have a problem with some of my ubuntu machines, they are sometimes
stuck in a boot process, issuing "a start job is running..." in an
endless loop.
I have activated systemd's debug console (terminal 9) to find the
problem, but found the debug console as almost
All passwords are already entered, the problem occurs some time after
the passwords have been entered, and as far as I could see on the debug
console, all encrypted devices exist under /dev/mapper, so it does not
seem to be caused by encryption (except for the fact that encryption
generataes long
Public bug reported:
Hi,
on several of my machines (encrypted, 16.04 and 16.10) it *sometimes* happens,
that systemd is stuck in booting telling
"A start job is running for dev-mapp...ypt.device (5min 40s / no limit)"
(endless loop, counting the time up)
(only) rebooting helps, but that's
Public bug reported:
Hi,
ufw makes it difficult to deploy firewall rules through management
systems like puppet, ansible or other scripts.
ufw has three points where to put rules in:
before.rules
user.rules
after.rules
the ufw command accepts only a very limited sort of rules, and user.rules
> Which are the perceivable consequences of this bug?
I currently cannot survey the consequences, since I am not familiar with
the recent semantic changes of apparmor (are there any docs? Any hints
to the users about changes? Any release notes?)
For some time now I am spending and wasting lots
> Removing the LXD task, this is yet another apparmor bug from the apparmor
> stacking/namespacing change which was backported to Xenial.
Well, that explains a lot. 16.04 was formerly stable but recently began to
drive me crazy because of so many apparmor problems with almost every major
I already have opened separate bugreports for firefox and chromium.
Seems as if some problems can not be fixed since the sandbox model of
chromium allegedly has a higher complexity than apparmor can deal with
and would exceed the capabilities of apparmor.
--
You received this bug notification
Public bug reported:
Hi,
aa-notify is highly annoying.
Unfortunately the aa-armor profiles of firefox and chromium-browser are
poorly maintained and cause dozens, hundreds, thousands of log messages
for denied access, in most cases the same message again and again.
aa-notify then throws
Public bug reported:
Hi,
strange problem recently occured:
I'm having some ubuntu machines running in LXD (nothing unusual, just
based on the regular ubuntu LXD images) on a ubuntu host. Worked well
for some time.
But now the host generates messages like
Jan 6 19:17:05 monstrum kernel: [
More trouble with that udev script:
Plugging in a USB ethernet dongle into a bridge which lists it as a port
does not work. It takes an additional
ifconfig up
to switch the ethernet interface on.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
Public bug reported:
Hi,
I just ran into a problem. I've configured a bridge as a virtual lan
(for lxc, lxd, and these things), but also configured an USB Ethernet
dongle to be part of the bridge.
If the dongle is present at boot time or if the dongle is put in while
the bridge is down, then
Public bug reported:
Hi,
I'm currently hunting some problems caused by some ambiguity in the
dnsmasq config.
There's a directory /etc/dnsmasq.d, where some packages put files with
except-interface=... clauses, telling other instances of dnsmasq to
"Keep your fingers from my interface". Good
Public bug reported:
Hi,
I'm currently trying to use dovecot in a test scenario, but run into the
problem of a strange malfunction of apparmor.
What I do:
installed packages dovecot-core and dovecot-lmtp
(and of course apparmor)
Then I do (as root)
/usr/lib/dovecot/dovecot-lda -d
Public bug reported:
Hi,
when using the Chromium Browser, the screen (LXDE) drowns in warning
messages because of heaps of apparmor profile violations. Unusable
without intense manual modifications.
For some strange reason /etc/apparmor.d/usr.bin.chromium-browser is over
a year old
-rw-r--r--
Strange side effect:
Launchpad didn't let me report the bug against the package lxc1 because
launchpad insists that there is no lxc1 package.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lxc in Ubuntu.
Public bug reported:
Hi,
I just upgraded a server machine from 14.04 to 16.04.1 and lost lxc
during upgrade, because the upgrade process removed it.
Now I can't install lxc due to broken dependencies/incomplete package
upload:
lxc : Depends: lxc1 (>= 2.0.5-0ubuntu1~ubuntu16.04.2) but it is
Public bug reported:
Hi,
I'm running an Ubuntu PXE server with dnsmasq.
Manpage says
-M, --dhcp-boot=[tag:,],[[,|]]
(IPv4 only) Set BOOTP options to be returned by the DHCP server.
Server name and address are optional: if not provided, the name is left empty,
and the address
Definitely no manual interaction, fresh install recently.
# apt-mark showauto ^linux-image-.*
linux-image-4.4.0-21-generic
linux-image-4.4.0-22-generic
linux-image-4.4.0-24-generic
linux-image-4.4.0-28-generic
linux-image-4.4.0-31-generic
linux-image-extra-4.4.0-28-generic
Public bug reported:
On one 16.04 machine I have 5 4.4.0-kernels in /boot now (on another
machine even 6):
-rw--- 1 root root 7013968 Apr 19 00:21 vmlinuz-4.4.0-21-generic
-rw--- 1 root root 7015440 Mai 13 01:55 vmlinuz-4.4.0-22-generic
-rw--- 1 root root 7020176 Jun 8 23:39
I tried to fix the problem with a config file
Swis721 BdRnd BT
Bold
regular
regular
fc-cache now complains about
Fontconfig warning:
Public bug reported:
Hi,
the font configs just caused me lots of headache.
I have a single TTF font (in this case Swiss 721 Bold Rounded BT), where
the font foundry for some reason chose to call the subfamily name given
in the TTF file 'Bold'. Which is confusing, since the font is not really
BTW: Is there anywhere some docs for /etc/fonts/* stuff, or is it just
that 'take-it-as-it-is-or-die' thing?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ubuntu.
https://bugs.launchpad.net/bugs/1593196
It seems to be rather a problem of sasl2-bin.
#1575757 says that (and how) nfs-kernel-server should run inside lxc. I
therefore changed the config and tried to purge both problematic
packages sasl2-bin and nfs-kernel-server.
I could remove nfs-kernel-server, but sasl2-bin does not even allow to
Well, the sheer number of warnings on the screen renders the session
unusable. Didn't test it any further to see whether it's just warnings
or a limitation of functions.
Let's wait for 16.04.
regards
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Public bug reported:
Upgrade 15.10 -> 16.04 failed
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: systemd-sysv 229-3ubuntu2
ProcVersionSignature: Ubuntu 4.4.0-16.32-generic 4.4.6
Uname: Linux 4.4.0-16-generic x86_64
ApportVersion: 2.20.1-0ubuntu1
Architecture: amd64
Date: Wed Apr 6
typo: meant ifquery --state instead of ifstate
Need to do more checks, but seems to be fixed on Ubuntu 16.04, which comes with
a newer version of ifupdown
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ifupdown in
Famous last words of strace -s 80 -f ifquery --state vlan0
arch_prctl(ARCH_SET_FS, 0x7fb790db1700) = 0
mprotect(0x7fb790bb2000, 16384, PROT_READ) = 0
mprotect(0x60c000, 4096, PROT_READ) = 0
mprotect(0x7fb790ddf000, 4096, PROT_READ) = 0
munmap(0x7fb790db3000, 171412) = 0
fcntl(0,
I've found two problems:
1.) See /lib/systemd/system/ifup-wait-all-auto.service the line
for i in $(ifquery --list --exclude lo --allow auto); do
INTERFACES="$INTERFACES$i "; done;
There is a space missing in "$INTERFACES$i " it concatenates all
device names into one
2.) This
More analysis:
ifstate crashes if /run/network/ifstate is not present.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ifupdown in Ubuntu.
https://bugs.launchpad.net/bugs/1535648
Title:
ifquery crashing
Status in
Public bug reported:
Hi,
I'm just trying to configure an ubuntu machine to work as a network
controller (dhcp, dns,...) for several virtual and physical machines,
using a linux bridge as a virtual network, and trying to automatically
add USB-Ethernet-Devices to the bridge through udev.
Public bug reported:
Hi,
I'm just doing some tests where to use an ubuntu machine as a router and
thus plugging in an USB Ethernet devices as it's second ethernet
interfaces.
Unfortunately I can't keep that damned Network manager from renaming the
device (i.e. from eth0 to enxe80006d8),
Public bug reported:
Hi,
I have a
source interfaces.d/vlan0
in my /etc/network/interfaces, and in that vlan0 file
auto vlan0
iface vlan0 inet static
bridge_ports none
bridge_fd0
bridge_stp off
address 192.168.200.1
netmask 255.255.255.0
up
Public bug reported:
Ubuntu 15.10 comes with a /etc/debian_version , claiming to be a
jessie/sid. Can confuse software. Should have /etc/ubuntu_version
instead.
regards
ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: base-files 7.2ubuntu11
ProcVersionSignature: Ubuntu 4.2.0-22.27-generic
Further observations:
I meanwhile figured out three modes:
1) putting the swap flag into /etc/crypttab -> crashes the partition
every now and then, but not always.
2) removing the flag from /etc/crypttab, but keeping it in /etc/fstab and
keeping it in
/etc/initramfs-tools/conf.d/resume:
Public bug reported:
Hi,
I had recently reported that the chromium-browser cause lots of apparmor
denial messages, thus filling the screen completely with those ubuntu-
specific black warning message tiles. See #1504049
Some people then turned this into a guest session problem and fixed the
Public bug reported:
Hi,
lxc-templates comes with tamples for ubuntu and ubuntu-cloud, but both
are rather large and „complete”, too large for most applications. E.g.
it does not make sense to have multiple consoles running in a container
or an sshd.
Would be nice to have a template for
As far as I can see the ubuntu template uses debootstrap and not the
core image.
And a plain lxc image created with the ubuntu template takes 379 MB
(btrfs file system), while an unpacked ubuntu core has just 145 MB.
So I doubt that this is the same.
It is, btw., not a good idea to include vom
OK, I've finally found the problem(s). Was a bunch of little nasty
problems, that's why it was difficult to debug.
1)
The 15.10 beta installer had filled /etc/initramfs-tools/conf.d/resume
with
RESUME=UUID=a18e9ec9-1255-4dda-8298-8e10bdbe6835
which is never updated after first installation.
Public bug reported:
Hi, this is a splitoff of bug #1506139
I'm usually using a setup with three partitions on a disk
Partition 1: plain ext4 boot partition mounted on /boot
Partition 2: luks-encrypted swap
Partition 3: luks-encrypted btrfs for / /home ...
but on one of my systems the boot
More info from the source code of systemd-cryptsetup:
else if (streq(option, "luks"))
arg_type = CRYPT_LUKS1;
...
} else if (STR_IN_SET(option, "plain", "swap", "tmp"))
arg_type = CRYPT_PLAIN;
so the swap argument overwrites the luks argument and resets the
OK,
I have debugged this down and got big steps further in identifying the
problem.
An important step for debugging was to learn how to debug systemd.
http://freedesktop.org/wiki/Software/systemd/Debugging/
was quite helpful, that
systemctl enable debug-shell.service
helps a lot.
apport information
** Attachment added: "XorgLogOld.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500078/+files/XorgLogOld.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "XorgLog.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500077/+files/XorgLog.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "xdpyinfo.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500080/+files/xdpyinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
> Hadmut Danisch, you didn't follow the instructions noted in
Why do you give instructions in reverse order and not in the order they have to
be followed?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubu
apport information
** Tags added: ubuntu
** Description changed:
I've installed 15.10 beta on a brand new ASRock beebox N3150 PC. This
device has three display connectors, 1x DisplayPort, 2xHDMI. I'm having
a Display with 2560x1600, and thus want to use with with DisplayPort for
full
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500073/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500074/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "xserver.devices.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500081/+files/xserver.devices.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500066/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "DpkgLog.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500067/+files/DpkgLog.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500072/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1503590/+attachment/4500075/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
1 - 100 of 126 matches
Mail list logo
