@mruffell, spinning up a clean Azure 18.04 Bionic VM and following your
steps + reproducer, I can confirm DNS and network connectivity work
fine:
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 18.04.6 LTS
Release:18.04
Codename: bionic
/supported.html
Here are some Smart Card Readers that were intermittently working in Linux:
[ray@ThinkPad ~]$ lsusb
Bus 005 Device 021: ID 0bda:0165 Realtek Semiconductor Corp. Smart Card Reader
Interface
Bus 003 Device 003: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
The Realtek
** Changed in: ccid (Ubuntu)
Assignee: Ubuntu Security Team (ubuntu-security) => Ray Veldkamp
(rayveldkamp)
** Changed in: ccid (Ubuntu)
Status: New => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subs
I also had this problem. I was upgrading from 16 LTS -> 18 LTS -> 20 LTS
sudo mv
/usr/share/dbus-1/system-services/org.freedesktop.systemd1.service{,.bak}
sudo apt purge systemd-shim
Do you want to continue? [Y/n] y
Abort.
(Not sure why that happened and I had to run it again to actually get it
Public bug reported:
ntp-systemd-netif.path contains the following:
[Install]
WantedBy=network-pre.target
However, network-pre.target is a passive systemd target. It is used
only for ordering, and is not guaranteed to be pulled in unless
something else calls for it explicitly.
On a host where
Public bug reported:
I had a fresh installation of Ubuntu-18.04. From the beginning suspend
was failing spuriously. When I looked up in Google, I was suggested to
upgrade my kernel as the provided kernel 4.15 was buggy. So I compiled
the kernel from source and upgraded to 5.04. The problem still
Public bug reported:
no linux file found 16.04 GMT
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: xorg 1:7.7+19ubuntu7.1
ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20
Uname: Linux 4.18.0-15-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.6
Architecture: amd64
BootLog:
Public bug reported:
boot up failed *4... may be the [root] could not read f?
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: xorg 1:7.7+19ubuntu7.1
ProcVersionSignature: Ubuntu 4.15.0-32.35-generic 4.15.18
Uname: Linux 4.15.0-32-generic x86_64
.tmp.unity_support_test.0:
ApportVersion:
This behavior is also presenting on Bionic.
** Tags added: bionic
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to console-setup in Ubuntu.
https://bugs.launchpad.net/bugs/1770248
Title:
console-setup fails intermittently
Hi G,
Sorry, I can't verify this as I no longer work at that company and my
current work doesn't have the same setup.
On 08/12/18 13:13, gf wrote:
> Hello Ray,
> Thank you for submitting this bug and reporting a problem with cups and
> printing. You made this bug report some
There is a workaround for this bug, which I found at:
https://neklaf.wordpress.com/2015/04/02/workaround-to-debian-gnulinux-upgrade/
where you manually disable avahi-daemon before the dpkg operation and reenable
it afterwards:
1. sudo systemctl disable avahi-daemon
2. (upgrade/reinstall
eased => New
** Changed in: debian
Remote watch: Debian Bug tracker #756630 => None
** Changed in: debian
Assignee: (unassigned) => Ray (lucenzeo00)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to sh
Also note that the previous (current) version of network-manager
(1.2.6-0ubuntu0.16.04.1) is also failing s390x autopkgtest.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
The autopkgtest failure on s390x is in a test that checks rfkill
integration. s390 kernels do not have CONFIG_RFKILL set. Behavior
change might have something to do with the recent change to s390x
autopkgtest from LXC containers to VMs?
Version 1.2.6-0ubuntu0.16.04.2 has been deployed here to several
machines that were experiencing the bug multiple times per day. All
DHCP renewal requests since deployment have resulted in renewal
notifications being successfully delivered to NetworkManager.
** Tags removed:
Sorry for the delay - I was away for a week. I have deployed the
packages from -proposed and will confirm after keeping an eye on DHCP
lease renewals for a while.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
Sjors:
I'm interested to know how it goes for you with this update (either from
the included debdiff, or from the packages when they hit -proposed.) We
were seeing the exact same symptoms you were, and deep-dove into your
backported fix from the GNOME bug and it all seems like it should fix
the
** Description changed:
I've found an issue on some of our Xenial office machines, causing
NetworkManager to drop its IP address lease in some cases when it
shouldn't. I'm not sure if the actual bug is in NetworkManager or
perhaps dbus or dhclient, but I'll do my best to help to figure
Correction/Addendum to the SRU justification above:
Fixed in current Ubuntu. Bionic uses NM 1.8.x. This bug was fixed in
1.4.
[Impact]
* This LP bug's original submitter backported the upstream 1.4 fix to
1.2, not Upstream.
[Regression Potential]
* The patch changes both nm-dhcp-helper and
[Impact]
* nm-dhcp-helper sometimes fails to notify NetworkManager of a DHCP
lease renewal due to a DBus race condition.
* Upstream NetworkManager 1.4 fixes the race condition by changing
nm-dhcp-helper's DBus notification from signal "Event" to method
"Notify".
* Upstream
Upstream GNOME bug fixed. I've applied the fix to Xenial's NM and
tested. SRU incoming.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1696415
Title:
Public bug reported:
I haven't been able to play you tube videos on the you tube website, the
Google Web Store-You Tube Player, the SMplayer, VML Player or any of
your available applications. Either the videos are just refused to be
accepted, or on the you tube site, they play way too fast, are
*** This bug is a duplicate of bug 1676380 ***
https://bugs.launchpad.net/bugs/1676380
** This bug has been marked a duplicate of bug 1676380
Update to cups-daemon 2.1.3-4ubuntu0.2 results in maintainer script failures
--
You received this bug notification because you are a member of
Can confirm. Saw this failure on dozens of machines today when 2.1.3-4
failed to upgrade to 2.1.3-4ubuntu0.2.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1676993
Title:
I am also having this problem. I'm trying to profile libcurl in Ubuntu
16.04 LTS and I get this:
export LD_PROFILE_OUTPUT=`pwd`
export LD_PROFILE=libcurl.so.4
src/.libs/lt-curl google.com > /dev/null
sprof lib/.libs/libcurl.so.4 libcurl.so.4.profile -p >log
_dl_open: Assertion
check if this is a dupe of:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1467190/
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1582414
Title:
No HDMI audio
sudo apt-get install python-pyqt5
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1451808
Title:
apport-collect error: No module named PyQt5.QtCore
Status in apport
*** This bug is a duplicate of bug 1467190 ***
https://bugs.launchpad.net/bugs/1467190
** This bug has been marked a duplicate of bug 1467190
No audio over DisplayPort MST
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed
*** This bug is a duplicate of bug 1467190 ***
https://bugs.launchpad.net/bugs/1467190
what a shame - still not working - tried it in xenial and yakkety again
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver
** Summary changed:
- Lynx Point-LP HD Audio - no way to get sound working in 5.1 mode over HDMI
working
+ Lenovo Onelink Pro Dock - No audio via Dock-HDMI
** Description changed:
- With Lynx Point-LP HD Audio, there's no way to use HDMI 5.1 output. Video
works though. Does neither work with
Disabling sensors in Bios makes Suspend work again
STM Micro HID Sensor HUB, working through IIO HID
accelerometer sensor
rotation sensor
magnetometer sensor
angular velocity sensor (aka gyroscope)
inclination sensor
ambient light sensor
--
You received this bug
** Attachment added: "lsusb"
https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1593981/+attachment/4686163/+files/lsusb
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pm-utils in Ubuntu.
** Attachment added: "lspci"
https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1593981/+attachment/4686162/+files/lspci
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pm-utils in Ubuntu.
** Attachment added: "dmesg"
https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1593981/+attachment/4686161/+files/dmesg
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pm-utils in Ubuntu.
sudo pm-suspend from commandline works, closing the lid or using KDEs
suspend button won't
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pm-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1593981
Title:
pm-utils suspend
Public bug reported:
If I turn on sensors (connected to usb) in the BIOS of my Lenovo
Thinkpad S1 Yoga suspend fails (immediately wakes up) every 2nd time.
Disabling async doesn't help.
** Affects: pm-utils (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug
Public bug reported:
I tried to install a package and it said the package is not available,
but is referred to by another package. The package is cmake and I know
is available so I was kind of in disbelief. I tried the same command
again and then it worked. Here is the output:
*** This bug is a duplicate of bug 1581567 ***
https://bugs.launchpad.net/bugs/1581567
I'm getting no error when changing the language order (except lack of
persistence beyond a reboot), but when I try to change the regional
settings, I get a crash due to permission denial.
Would like to
I have the same (or very similar) problem on a fresh 16.04 install (same
problem on 15.10 upgraded to 16.04, but I reinstalled to be sure).
Dell Latitude E4300
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
Subsystem:
Public bug reported:
Happended while trying to install Kali Packages
ProblemType: Package
DistroRelease: Kali 2016.1
Package: console-setup-linux 1.108ubuntu9
ProcVersionSignature: Ubuntu 4.2.0-35.40-generic 4.2.8-ckt5
Uname: Linux 4.2.0-35-generic x86_64
ApportVersion: 2.19.1-0ubuntu5
Public bug reported:
Precise (12.04 LTS) is missing the leap-seconds.list file.
Communication with systems that aren't readily connected to the internet
(like space systems) often requires using a non-leaping time base such
as TAI.
While it's possible to convert an entire ubuntu system to TAI,
340.65 and older propriotary that came with 15.04 none of them work.
On Sat, Sep 19, 2015 at 7:14 PM, Christopher M. Penalver <
christopher.m.penal...@gmail.com> wrote:
> Ray Brown, thank you for reporting this and helping make Ubuntu better.
> Could you please advise which dr
Public bug reported:
Ubuntu Version: Ubuntu 14.04.3 LTS
Package Version: 1.23-git201403102151-1ubuntu1 (Tried several other versions
too)
I've looked at a bunch of tutorials, but I just can't solve this
problem. In fact, I've never seen Bluetooth audio work, for anyone I
know, granted most of
Public bug reported:
The reason I was checking was because my HDMI monitor is not being
recognized. Also it says that my graphics card is not being used??? I
am a noob so not sure how to set the card up??? Why wasn't it
detected???
ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: xorg
HI,
just wondering if there is any update on this?
Thanks
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1448567
Title:
Ubuntu 15.04 - Macbook Pro Early 2015
Ditto!
Same issue here. Newly installed, updated and upgraded Ubuntu 14.04 LTS.
Monitor ASUS 27 through HDMI.
After the established timeout, screen does blank out, and monitor detects the
poweroff and starts powering off. But then the lock screen comes up with
request to log in password, and
Public bug reported:
All applications with a Launcher icon have a set of standard commands,
such as Unlock from Launcher and Quit. They should all have a Show
All Windows command as well.
It is really bothersome when I have Terminal open and click on the
Launcher icon and I see one window come
Public bug reported:
played one track. when I tried to play another track app ;hung up.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: alsa-base 1.0.25+dfsg-0ubuntu4
ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
Uname: Linux 3.13.0-37-generic i686
ApportVersion:
I had the same thing as Marcel noted in comment #8. My /tmp directory
was filled with links to a ppd file under /etc/cups. I had to reboot in
recovery mode to remove them. There were more a million, there were at
least one link for every 13-digit hexademical number starting with the
same 6
to do,
but a job that software could do for me. Is there software that can do
this for me? If so, please let me know which it is.
thanx - ray
ps: I have read through these for help:
http://www.reddit.com/r/Ubuntu/comments/jv5vy/ubuntu_1110_so_far_screenshot_tour_by_jono_bacon/c2fk1bs
I will have to see if the previous comment is a work-around. This is
becoming increasingly obnoxious. Several of my applications now create
new windows that are big enough that they are against the bottom of the
screen and are therefore non-resizeable.
The only way to get most apps to give you a
Wow. Well I changed the -UnityDecoration-extents value from '28px 0 0 0'
to '28px 10px 10px 10px'. This is obviously too big.
On the other hand, it is _really_ nice to not have to hit that 10 micron
thick region of the window that one needs to hit to get a resize handle.
Even when I can navigate
that can do
this for me? If so, please let me know which it is.
thanx - ray
ps: I have read through these for help:
http://www.reddit.com/r/Ubuntu/comments/jv5vy/ubuntu_1110_so_far_screenshot_tour_by_jono_bacon/c2fk1bs
http://askubuntu.com/questions/28086/what-are-unitys-keyboard-and-mouse
I experience this issue on a single-screen environment; however, we
frequently have multiple users logged in and so are using multiple
virtual terminals. Sometimes it is possible to switch another VT and
have that user log out and that alleviates the issue.
--
You received this bug notification
Is this going to be fixed somehow?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssl in Ubuntu.
https://bugs.launchpad.net/bugs/955675
Title:
openssl s_client's '-ssl2' option no longer works in 12.04
Status in
Public bug reported:
Intermittently the password textfield will be completely missing from
the unlock screen. The user's name appears and the background graphic
which usually surrounds the textfield is present, but the textfield
itself is missing. This typically happens when multiple users are
Public bug reported:
When I move my cursor to the bottom right corner of any window, the
cursor changes to the resizing handle and I can resize the window.
But, between 14.02 LTS and 14.04 LTS, then indicator appears farther
down. Now, the indicator changes a few pixels below the outside edge of
Public bug reported:
I enabled workspaces and then I started to drag windows to a second
workspace.
First, I started dragging a few Terminal windows. I had no problem. Then
I dragged a Firefox window that was showing a pdf that I have local on
my system and the UI hanged. I had to to a hard
Public bug reported:
Touchscreen doesnt react on any touches
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8
ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
Uname: Linux 3.13.0-32-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
cannot even find a device via lsusb (on my lenovo yoga pro thinkpad
everything works)
** Package changed: xorg (Ubuntu) = linux (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
60 matches
Mail list logo
