post output of alsa-info.sh
** Changed in: alsa-driver (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1365769
Title:
your codec have two adc and audio input node 0x10 with stream tag 4 is
recording
Node 0x10 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name=Capture Volume, index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name=Capture Switch, index=0, device=0
ControlAmp:
smaft 5.1 was replcaed by channel mode long time ago
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
seem no capture controls
pulseaudio don't support 4 channels volume control
http://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/src/modules/alsa
/alsa-mixer.c?id=527078523815587bfd021bc1d10782403e9b3e84
Card hw:1 'USB'/'E-MU Systems, Inc. E-MU 0404 | USB at usb-:00:1d.7-2, high
speed'
are you running your vmware in windows or Linux ?
which audio backend are you using ?
the emulated sound card won't give accurate playback position
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
** Changed in: alsa-driver (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1366922
Title:
[ENS1371 - Ensoniq AudioPCI,
seem Jack detection problem , pulseaudio check the Jack state
try
hda-jack-sense-test -a
control.31 {
iface CARD
name 'Front Mic Jack'
value false
comment {
access read
type BOOLEAN
pcm.!default {
type plug
slave.pcm asymed
}
any reason to overwrite pcm.default when you are running pulseaudio
for desktop , the front panel headphone and Mic can use alt analog device when
independent HP is enabled
APLAY
List of PLAYBACK Hardware Devices
card 0:
seem bug if your card support 10 channels
lt-pulseaudio] alsa-util.c: Managed to open hw:2
I: [lt-pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
D: [lt-pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit
Little Endian) failed: Invalid argument
D:
240.616574] INFO: task parallel:3521 blocked for more than 120 seconds.
[ 240.616579] Tainted: GF O 3.13.0-35-generic #62-Ubuntu
[ 240.616580] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this
message.
[ 240.616581] parallelD 8800bf414440 0 3521
how do pulseaudio get base volume -36 dB since dB range is less than 30
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1369258
Title:
[USB-Audio - USB Device
do you mean the bug is not fixed ?
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_analog.c?id=1cd9b2f78bf29d5282e02b32f9b3ecebc5842a7c
https://bugzilla.kernel.org/show_bug.cgi?id=66321
** Bug watch added: Linux Kernel Bug Tracker #66321
strange that your alsa-info was alc883 but pulseaudio was alc887
Codec: Realtek ALC883
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10ec0883
Subsystem Id: 0x1458c603
Revision Id: 0x12
properties:
alsa.card = 0
alsa.card_name = HDA Intel
** Changed in: alsa-driver (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1369645
Title:
[945GCM-S2L, Realtek ALC883, Green
if you don't use pulseaudio, you need to change the order of the onboard
and hdmi by /etc/modprobe.d/alsa-base.conf so that your PCH are card 0
instead of card 1
options snd-hda-Intel index=1,0
ARECORD
List of CAPTURE Hardware Devices
card 1: PCH [HDA Intel PCH], device 0: VT1802
5.1 is only available after you change the channel mode from 2ch to 6ch
which retask blue line in and pink mic Jack as output, before pulseaudio
probe the sound card during startup
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'
this mean
change channel mode to 6ch
save the setting by
alsactl store
at next reboot/login
alsactl restore
before starting pulseaudio
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
did you plug all your 5.1 speakers ?
the main problem are the Jack state of the rear Mic jack and line in
Jack become true and pulseaudio caanot determine the default source
control.34 {
iface CARD
name 'Rear Mic Jack'
value false
Default sink name: alsa_output.pci-_01_00.1.hdmi-stereo-extra1
Default source name: alsa_input.pci-_00_1b.0.analog-stereo
pulseaudio change the default sink to hdmi
and the digital device instead of analog is the active profile
you have to find out why it is auto selected or your
can you post the output of alsa-info.sh
did node 0x3d and node 0x3e appear in the codec info after the patch ?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1313904
can you add snd_printk to print / find out whether it can read wcaps
0x200500 from node 0x3e after changing codec-num_nodes ?
nid = codec-start_nid;
for (i = 0; i codec-num_nodes; i++, nid++)
codec-wcaps[i] = snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
--
You
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/sound/pci/hda/hda_proc.c
it is because nodes is read from codec again in print_codec_info()
need to fix this value
nodes = snd_hda_get_sub_nodes(codec, codec-afg, nid);
if (! nid || nodes 0) {
int snd_hda_get_sub_nodes(struct hda_codec *codec, hda_nid_t nid,
hda_nid_t *start_id)
{
unsigned int parm;
parm = snd_hda_param_read(codec, nid, AC_PAR_NODE_COUNT);
if (parm == -1)
return 0;
/* this mean we need to fix the param
snd_hda_get_sub_nodes(struct hda_codec *codec, hda_nid_t nid,
hda_nid_t *start_id)
{
unsigned int parm;
parm = snd_hda_param_read(codec, nid, AC_PAR_NODE_COUNT);
if (parm == -1)
return 0;
*start_id = (parm 16) 0x7fff;
/* this mean we need to fix the return value param when
ode 0x08 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name=Headphone Playback Volume, index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name=VT1802 Analog, type=Audio, device=0
Device: name=VT1802 Alt Analog, type=Audio, device=2
the two devices cannot share
http://www.intel.com/support/motherboards/desktop/sb/CS-034206.htm
for desktop, those rear panel line out jacks output support multi channel
playback and the front panel headphone can support multi streaming on some hda
codec
--
You received this bug notification because you are a member of
http://git.kernel.org/cgit/linux/kernel/git/tiwai/hda-
emu.git/tree/codecs/vt1802-asus-u30s?id=HEAD
compare with this notebook, device 0 nid is using speaker 's audio output and
device 2 is using headphone 's audio output
seem spec-gen.indep_hp = 1 is not enough to force the driver to use
node 0x0b does not support input, it is unlikely that they are reversed
you have to run
hda-jack-sense-test -a
when you plugged and unplugged
both HP and Mic are not plugged
control.16 {
iface CARD
name 'Headphone Jack'
value false
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Line In'
Mic Jack was changed to line in Jack by Mic Jack mode control
** Changed in: alsa-driver (Ubuntu)
Status: Confirmed = Incomplete
--
You received this bug notification because you
ports:
analog-input-microphone-internal: Internal Microphone (priority
8900, available: no)
properties:
analog-input-microphone: Microphone (priority 8700, available:
yes)
properties:
http://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/src/modules/alsa/mixer/paths
/analog-input-mic-line.conf
you have to ask pulseaudio Dev how to add the Mic Jack mode
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
alernative is to force the driver not creating the Mic Jack mode control
which Mic Jack can be used as Mic only by hint
add_jack_modes=false
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/Documentation/sound/alsa/HD-Audio.txt
- add_jack_modes (bool): add xxx Jack Mode enum
18.706959] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 18.706968]speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.706971]hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.706973]mono: mono_out=0x0
[ 18.706975]inputs:
[ 18.819134] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
18.706959] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 18.706968]speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.706971]hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.706973]mono: mono_out=0x0
[ 18.706975]inputs:
[ 18.819134] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_realtek.c?id=73bdd597823e2231dc882577dbbaf8df92fe1775
the above patch only expect notebook have one Jack but this note book
has three and there is no line out mode
(2x) Audio Out 1/8 Ports (One compatible
to find the headset Mic , you may need to disable the Mic jack by
retasking or stop pulseaudio
since the module switch on available port will switch the port to
internal Mic when it found Mic Jack is not plugged
--
You received this bug notification because you are a member of Ubuntu
Touch
NO, not all HDA codec allow you to change Mic Jack into the headphone
jack, usually the notebook have utilialized the volume controls of the 4
or 6 channels codec and don't have any spare dac or amp for the extra
headphone
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_via.c?id=5a6f294e87974e6ec68d7113553ffd975d83bf15
you may need to ask the author whether you case is related to this patch
--
You received this bug notification because you are a member of Ubuntu
Touch
control.10 {
iface MIXER
name 'Capture Source'
value 'Internal Mic'
comment {
access 'read write'
type ENUMERATED
count 1
item.0
if the user manual mention that it support headset, headphone and Mic,
removing 0x19 is just a dirty workaround since HP Jack support OUT and
not support IN
seem really use 0x19 for Mic jack
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name=Headphone Playback Switch,
9.684335] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
type:speaker
[9.684341] sound hdaudioC0D0:speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[9.684344] sound hdaudioC0D0:hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[9.684346] sound hdaudioC0D0:mono: mono_out=0x0
[
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_sigmatel.c?id=0a4278464eba4bf98c0d6304c62a1116553125d3
seen incorrect pin fixup
port D should be line out instead of speaker when it support Jack
detection
send email to the author
use hdajackretadk to fix
reatasking subwoofer as line out is a trick which force the driver share
volume control with speaker
the drawback is missing volume control of the subwoofer but you have
volume controls for your headset and headphone
--
You received this bug notification because you are a member of Ubuntu
Touch
38027.160124] PM: Entering mem sleep
[38027.160213] Suspending console(s) (use no_console_suspend to debug)
[38027.161142] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38027.228349] [fglrx] IRQ 50 Disabled
[38027.228459] [fglrx] Preparing suspend fglrx in kernel.
[38027.228466] kworker/u:9: page
if your subwoofer work with stereo when retask as line out, this mean that you
don't need use 4 channels and ladspa plugin
you need to revert or modify this patch so that the two dac of speaker
and subwoofer play stereo instead of surround40
if hardware cannot distinguish headset and headphone
does this mean that the function if the Jack is determined by capture
source ?
internal Mic = headphone
headset Mic = headset
headphone Mic = mic
control.10 {
iface MIXER
name 'Capture Source'
value 'Internal Mic'
comment {
you have to provide verbose pulseaudio log
do you mean Mic is switch between internal Mic and dock Mic since
external Mic is unplugged ?
driver and pulseaudio need to check both ext Mic and dock Mic to decide
the Mic selection
--
You received this bug notification because you are a member of
Sysfs Files
!!---
/sys/class/sound/hwC0D0/init_pin_configs:
0x14 0x
0x15 0x
0x16 0x
0x17 0x
0x18 0x
0x19 0x
0x1a 0x
0x1b 0x
0x1c 0x
0x1d 0x
0x1e 0x
0x1f 0x
BIOS did not setup pin default
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/pci/hda/patch_realtek.c?id=5e6db6699b7651f02f4b7cc6a86f5b3d9359d636
you lost the beep playback volume / switch if you disable the loopback
mixer
the topology of realtek codecs are different from other hda codec,
the
** Changed in: alsa-driver (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1352525
Title:
No HDMI audio output
Status in
https://wiki.ubuntu.com/PulseAudio/Log
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1352495
Title:
[HDA-Intel - HDA Intel PCH, recording] Clipped audio output added
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_realtek.c?id=73bdd597823e2231dc882577dbbaf8df92fe1775
the patch is for dell notebook, it may not work if you are using Asus
notebook
it depend on how the notebook vendor and codec vendor implement the
combo
07:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788
[Oxygen HD Audio]
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!
--
07:04.0 0401: 13f6:8788
Subsystem: 1043:85f4
--
You received this bug
https://bugzilla.kernel.org/show_bug.cgi?id=81561
** Bug watch added: Linux Kernel Bug Tracker #81561
http://bugzilla.kernel.org/show_bug.cgi?id=81561
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
109.611744] hda-intel :00:1b.0: spurious response 0x0:0x0, last
cmd=0x324011
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1354439
Title:
[2324BY9, Realtek
do you mean dynamic adc switching does not work since you internal mic
only connected to node 0x11 but Mic jack connected to node 0x08 ?
Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x23 0x23]
Converter:
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x08 [Audio Input] wcaps 0x10051b:
node 0x11 and node 0x08
Converter: stream=0, channel=0
stream of one audio input node should be non zero when recording while
the other is zero
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
[20040.504082] INFO: task python:12341 blocked for more than 120 seconds.
[20040.504091] Not tainted 3.13.0-32-generic #57-Ubuntu
[20040.504093] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this
message.
[20040.504096] python D c166dcc0 0 12341 1 0x
Default sink name: alsa_output.pci-_03_00.1.hdmi-stereo
Default source name: alsa_output.pci-_03_00.1.hdmi-stereo.monitor
[ 9179.697137] gnome-screensav[23415]: segfault at 7f7b ip
7f7bd0d06293 sp 7fff106811f0 error 4 in
gameoverlayrenderer.so[7f7bd0cfb000
** Changed
you have to provide pulseaudio verbose log and system log during suspend
and resume if hdmi is selected instead of analog after suspend and
resume
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
Default sink name: alsa_output.usb-Alesis_io_2-00-io2.iec958-stereo
Default source name: alsa_input.usb-Alesis_io_2-00-io2.iec958-stereo
it is strange that there are two autoconfig but both does not has any digital
pin
[4.703799] autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:speaker
it is strange that pulseaudio select your USB audio device as default
sink when there is no volume control
the null autoconfig may be related to modem codec
Codec: Conexant ID 2bfa
Address: 1
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x14f12bfa
Subsystem Id: 0x104d0200
Revision Id: 0x9
Modem
are you running two pulseaudio server ?
Aug 9 14:10:29 VAIO-VGN-FE31B pulseaudio[3440]: [pulseaudio] server-lookup.c:
Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to
autolaunch a dbus-daemon without a $DISPLAY for X11
Aug 9 14:10:29 VAIO-VGN-FE31B
you need to ask the realtek engineer who add support of alc271
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=fe3eb0a73ca052ee9346a1544f4c00e697cc9a4e
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
Node 0x0b [Pin Complex] wcaps 0x410101: Stereo
Control: name=Speaker Phantom Jack, index=0, device=0
Pincap 0x0050: OUT Balanced
Pin Default 0x90100112: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x1, Sequence = 0x2
Misc = NO_PRESENCE
** Changed in: alsa-driver (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1356050
Title:
Alienware m17xr4 headphone, mic and
how do user know pulseaudio really save the sound setting ?
any program which dump those pulsraudio database file to verify the
sound setting is really saved ?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_sigmatel.c?id=29ac83635fcf244a7178f9fc8f918cd7ddf799d5
seem using dell_bios_spif
Codec: SigmaTel STAC9228
Address: 2
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x83847616
Subsystem Id: 0x1028022e
Revision Id:
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_sigmatel.c?id=f3e351eef3a7fd1e36a3e18d4f2f069b00deb23c
you need to fix mic jack node 0x0e similar to above patch if you Mic
Jack support detect
--
You received this bug notification because you are a member
try hda-jack-retask to clear misc bit of node 0
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1355247
Title:
STAC9228 / Dell XPS M1530 / Mic needs a boost, very low
file an upstream report if this notebook support external 5.1 speaker by
using three audio jacks at ext front
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Control: name=Front Headphone Surround Jack, index=0, device=0
Pincap 0x173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ
did you verify Mic Jack support Jack detection by
hda-jack-sense-test -a
seem digital mic
try record in stereo instead of mono , use audacity to find out whether
left and right are out of phase
Node 0x13 [Pin Complex] wcaps 0x41: Stereo
Control: name=Internal Mic Phantom Jack,
do your notebook support spdif , hdmi or both ?
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Control: name=SPDIF Phantom Jack, index=0, device=0
Pincap 0x0010: OUT
Pin Default 0x185610a0: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Black
DefAssociation =
do your notebook support spdif , hdmi or both ?
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Control: name=SPDIF Phantom Jack, index=0, device=0
Pincap 0x0010: OUT
Pin Default 0x185610a0: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Black
DefAssociation =
do pulseaudio save volume setting of all ports ?
if headphones were plugged during shutdown
but unplugged before next boot
will pulseaudio restore the speaker volume ?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
** Changed in: alsa-driver (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1356393
Title:
[XPS M1330, SigmaTel STAC9228, Mic,
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority
5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output
(priority 300, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI) Output
the driver don't enable auto Mic selection since the pin fixup disable
Jack detction of Mic Jack 0x0e
auto Mic cannot be enabled when there are internal mic and an
undetectable Mic jacks
you need to use
hda-jack-sense-test -a
if the Mic Jack can be detected ,use hda-jack-retask to fix HDMI
ports:
analog-input-microphone-internal: Internal Microphone (priority
8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = audio-input-microphone
analog-input: Analog Input
** Also affects: alsa-driver (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1334329
Title:
Sound input settings
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=ab16c6dd79389761eca1366d809a002b44b7f960
capture source control will not be created when auto mic is enabled by
adding hint
spec-line_in_auto_switch=1;
for avoiding regressions, the line-in auto switching
https://bugzilla.kernel.org/enter_bug.cgi?product=Drivers
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_cirrus.c?id=1077a024812d3b2d76a7a371df75795a276d9dd8
you need to file an upstream bug report
capture source still create when using hda-emu and
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/sound/pci/hda/patch_cirrus.c
do this macbook using iphone headset ?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
this mean you need to add mute, delay and unmute when this control is
changed by user
Simple mixer control 'Analog Output',0
Capabilities: enum
Items: 'Speakers' 'Headphones' 'FP Headphones'
Item0: 'Speakers'
--
You received this bug notification because you are a member of Ubuntu
Touch
[ 148.532127] BUG: Bad page state in process chrome pfn:126551
[ 148.532133] page:ea0004995440 count:0 mapcount:0 mapping:
(null) index:0x0
[ 148.532136] page flags: 0x23c(referenced|uptodate|dirty|lru)
[ 148.532142] Modules linked in: joydev hid_generic usbhid hid
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1380708
Title:
[G31M-ES2C, Realtek ALC883,
** Bug watch added: freedesktop.org Bugzilla #84983
https://bugs.freedesktop.org/show_bug.cgi?id=84983
** Also affects: pulseaudio via
https://bugs.freedesktop.org/show_bug.cgi?id=84983
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a
** Changed in: pulseaudio (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1381475
Title:
Firewire sound card registered by the
you have to post output of alsa-info.sh
pactl list
and
pulseaudio verbose log
https://wiki.ubuntu.com/PulseAudio/Log
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
---Mixer controls for card 0 [FW]
Card hw:0 'FW'/'TerraTec Electronic Gmb PHASE 88 Rack FW (id:3, rev:1), GUID
000aac0300592827 a'
Mixer name: 'PHASE 88 Rack FW'
Components: ''
Controls : 0
Simple ctrls : 0
which name do you want
when you plug and unplug the device
device.vendor.id = 13f6
device.vendor.name = C-Media Electronics Inc
device.product.id = 8788
device.product.name = Virtuoso 100 (Xonar D1)
device.string = 2
device.description = Virtuoso 100 (Xonar D1)
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right - Rear Left - Rear Right - Front
Center - Woofer - Side Left - Side Right
Limits: Playback 67 - 127
Mono:
Front Left: Playback 121 [90%] [-6.00dB] [on]
Front Right:
seem your card id not in alisaes.conf
http://git.alsa-project.org/?p=alsa-
lib.git;a=commitdiff;h=45e9496a7a666210702598d0c2d3b43065a5f940;hp=aba87e509898ec9ddb3e319267d7c267409ff100
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
Simple mixer control 'Front Panel',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
is this switch use to switch output between front panel headphone and
line out jacks ?
--
You received this bug notification because you are a member of Ubuntu
Touch
aplay -L
it is ok if the above command list surroun40, surround51 , surround71
pulseaudio] pid.c: Daemon already running.
you have to kill the deamon , disable auto spwan
and restart pulseaudio
pulseaudio -
https://wiki.ubuntu.com/PulseAudio/Log
--
You received this bug notification
have you ask the author of that patch ?
similar case is the four channel mic array of ps3 eye
USB Mixer information
!!---
USB Mixer: usb_id=0x14152000, ctrlif=1, ctlerr=0
Card: OmniVision Technologies, Inc. USB Camera-B4.04.27.1 at
usb-:00:1d.7-4, high
Unit: 3
W: [pulseaudio] alsa-mixer.c: Volume element Master has 8 channels. That's too
much! I can't handle that!
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' failed.
D: [pulseaudio] alsa-mixer.c: Added 0 ports
[pulseaudio] alsa-sink.c: Using 1,0 fragments of size 1048512 bytes
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/sound/firewire/Kconfig
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/sound/firewire
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/sound/firewire/bebob
strcpy(bebob-card-driver, BeBoB);
strcpy(bebob-card-shortname, model);
strcpy(bebob-card-mixername, model);
snprintf(bebob-card-longname, sizeof(bebob-card-longname),
%s %s (id:%d, rev:%d), GUID %08x%08x at %s, S%d,
vendor, model, hw_id,
1 - 100 of 1529 matches
Mail list logo
