Re: Part 68

Hello Dave, I hope the following will help you REN calculation for DC resistance For 0-100VDC REN=25 megohms/minimum DC resistance For 100-200VDC 150 kilohms/minimum DC resistance For Ringer type B AC REN=8000/mim. on-hook AC imped for lowest frequency AC REN=8000/Min. on-hook AC imped. for

Copy of: Part 68, Telco Power Draw

From: Christopher Saleem, 103423,250 TO: Roger Prenger, INTERNET:pren...@phx.sectel.mot.com DATE: 11/21/96 10:45 AM RE: Copy of: Part 68, Telco Power Draw Hi Roger, The max power that a single line loop start device is tested against in FCC part 68 is 42.5 Vdc at 24 mA, 52.5Vdc

RE: U.K. Complex Impedance Network for Measuring Return Loss

-- Forwarded Message -- From: Duane J Marcroft, INTERNET:dm...@crl.com TO: Rene Debets, INTERNET:rene_deb...@msn.com CC: Treg, INTERNET:TREG@WORLD.STD.COM DATE: 3/10/97 12:47 AM RE: RE: U.K. Complex Impedance Network for Measuring Return Loss Sender:

BOUNCE treg@world.std.com: Non-member submission from [rob desig...@globalnet.co.uk] (fwd)

Rob 1. For US, TSB 31A (or the latest version) would help 2. For Canada, CS03 issue 8 3. For Europe second final draft prTBR 21(Oct 1997) would be a good guide. These are some books that help me. Hope this will help you. Christopher Saleem EMC Technology Services, Inc.

Product Safety Engineer

EMC Technology Services is looking for a Product Safety Engineer. Must have +3 years revalent experience in UL 1950. Good communication skills. College degree or AS with experience required. Fax resume to HR EMC Technology Services, Inc. 49000 Milmont drive Fremont, CA 94538. Phone:

GOSIP

Hi Treggers, Can someone recommend a laboratory where I could do GOSIP conformance testing for terminal devices. Thanks for any help in this regard. Christopher

FCC Pulse Mask Templates

for the templates but they prefer to sell me a new scope. Thanks in advance for any help in this regard. Regards Christopher Saleem

Telecom Test Engineer

telecom equipment based on international telecom test standards, preparing test documentations, compiling test reports, and assisting in country certification. Please send me resumes if you know someone that fit the description. No phone calls please. Christopher Saleem (Senior Compl. Engr

PBX Interoperability Testing

? Thanks for your help Christopher Saleem (Senior Compl. Engr.) | | E-mail: csal...@cisco.com | | Phone : 408-527-8736 ||| ||| Fax:(408) 526-8348 | | 210 West Tasman Drive, MS SJ-F/1..:|||:...:|||:.. San Jose, CA 95134-1706

Re: Calibration Vendor Audits

of my questions on Treg. This is my personal opinion. Regards Christopher Saleem Senior Compliance Engineer Cisco Systems, Inc. Reply-To: treg@world.std.com Vic, Calibration vendor audits is a hot topic for many treg participants from accredited EMC laboratories. By open discussion

Re: Japanese Ring Gen Freq

impedance of the DC loop which must be 2Kohms or greater for 75Vrms/16Hz. These tests are for 2-wire analog lines. Christopher Saleem At 10:19 AM 10/1/98 -0500, Pete Van Raalte wrote: TREGers, I have contradictory information on Japanese requirements for 2- or 4-wire analog ring-down lines

Fwd: RE: E911 Virtual PBX

I got this today. Please ignore this message since I inadvertently sent it to TREG. Christopher

Re: Stupid Question, I Think

Linda are you referring to the data output power measurements for JATE Analog modems?(blue book). These measurements call for the analog modem to be sending a pattern of 0, 1, 1:1. Christopher Saleem At 04:59 PM 9/8/99 -0400, lbott...@aol.com wrote: I have a very basic question. Analog

Homologation Engineer

mail or fax your resume. Christopher Saleem e mail:csal...@cisco.com Phone:408-527-8736 Fax: 408-527-7234