On 09/11/2013 02:28 PM, Rajeshwari Birje wrote:
Hi All,
Please do let me know if any comments on the same.
Regards,
Rajeshwari Shinde.
On Thu, Aug 29, 2013 at 4:34 PM, Rajeshwari Birje
rajeshwari.bi...@gmail.com wrote:
CCing the MMC Maintainer.
On Thu, Aug 29, 2013 at 4:22 PM,
Dear Minkyu Kang,
-Original Message-
From: Piotr Wilczek [mailto:p.wilc...@samsung.com]
Sent: Friday, August 30, 2013 8:01 AM
To: 'Minkyu Kang'
Cc: 'u-boot@lists.denx.de'; 'Kyungmin Park'; Lukasz Majewski
Subject: RE: [PATCH V4 1/3] power:battery: add battery support for
Trats2
Hello Jagan,
Reply in-lined.
Regards
Priyanka
-Original Message-
From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
Sent: Saturday, September 07, 2013 12:19 PM
To: Jain Priyanka-B32167
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH] sf:eon: Add support for EN25S64
Hi,
On Thu,
On Wed, Sep 11, 2013 at 12:03 PM, Jain Priyanka-B32167
b32...@freescale.com wrote:
Hello Jagan,
Reply in-lined.
Regards
Priyanka
-Original Message-
From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
Sent: Saturday, September 07, 2013 12:19 PM
To: Jain Priyanka-B32167
Cc:
Dear Prabhakar Kushwaha,
Prabhakar Kushwaha prabhakar at freescale.com writes:
T1040QDS is a high-performance computing evaluation, development and
test platform supporting the T1040 QorIQ Power Architecture™ processor.
snipped
The code was test compiled.
You probably need to rebase to
On 09/11/2013 12:19 PM, Rommel Custodio wrote:
Dear Prabhakar Kushwaha,
Prabhakar Kushwaha prabhakar at freescale.com writes:
T1040QDS is a high-performance computing evaluation, development and
test platform supporting the T1040 QorIQ Power Architecture™ processor.
snipped
The code was
Dear Prabhakar Kushwaha,
Rommel Custodio sessyargc+uboot at gmail.com writes:
Dear Prabhakar Kushwaha,
Prabhakar Kushwaha prabhakar at freescale.com writes:
T1040QDS is a high-performance computing evaluation, development and
test platform supporting the T1040 QorIQ Power
Hi York,
On 11/09/2013 00:14, York Sun wrote:
+static int imximage_generate(struct mkimage_params *params,
+struct image_type_params *tparams)
+{
+struct imx_header *imxhdr;
+size_t alloc_len;
+struct stat sbuf;
+char *datafile = params-datafile;
+uint32_t
Hi Heiko, Marek,
Hello Marek,
Am 10.09.2013 23:20, schrieb Marek Vasut:
Dear Lukasz Majewski,
Hi Marek,
Dear Lukasz Majewski,
New function - dfu_get_alt() has been added to dfu core. If
proper alt setting is present, this function returns its number
corresponding to passed
Hi Scott,
On 10/09/2013 22:11, Scott Wood wrote:
Sure.
Acked-by: Scott Wood scottw...@freescale.com
I'm curious who's been doing these patchwork assignments and what
they're basing it on.
I think that everyone of us custodians has write rights to assign
patches. Personally, I check the
From: Shaohui Xie shaohui@freescale.com
Default configuration has been changed, the most important one is DDR
ref_clock which is changed from 66.67MHz to 133.33MHz. so the ratio need to
change from 24x to 12x to keep the DDR frequency. There are also some
other optimise to align with default
Dear Wolfgang Denk,
On 09/11/2013 12:45 AM, Wolfgang Denk wrote:
Dear Andreas Bießmann,
In message 1378472698-18557-4-git-send-email-andreas.de...@googlemail.com
you wrote:
The 'flashcard' u-boot configuration has a readonly environment and boots a
bare kernel/initrd to program the
Hi Wolfgang,
Dne 11.9.2013 00:52, Wolfgang Denk napsal(a):
Dear Jiří Prchal,
In message 522ed13f.90...@aksignal.cz you wrote:
This comment does not belong into the commit message - please move it
to the comment section, i. e. below the --- line.
I'm not sure if I even should number
On 10/09/2013 22:08, Philippe Reynes wrote:
Signed-off-by: Philippe Reynes trem...@yahoo.fr
Signed-off-by: Eric Jarrige eric.jarr...@armadeus.org
Acked-by: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 10/09/2013 22:08, Philippe Reynes wrote:
Signed-off-by: Philippe Reynes trem...@yahoo.fr
Signed-off-by: Eric Jarrige eric.jarr...@armadeus.org
Signed-off-by: Nicolas Colombain nicolas.colomb...@armadeus.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
Dear Piotr Wilczek,
On 30/08/13 15:00, Piotr Wilczek wrote:
Dear Minkyu Kang,
-Original Message-
From: Minkyu Kang [mailto:mk7.k...@samsung.com]
Sent: Friday, August 30, 2013 6:39 AM
To: Piotr Wilczek
Cc: u-boot@lists.denx.de; Kyungmin Park; Lukasz Majewski
Subject: Re: [PATCH V4
From: Shaohui Xie shaohui@freescale.com
Previous process of compiling a PBL boot image is:
1: make board_name_config
2: make u-boot.pbl
for example:
make T4240QDS_SDCARD_config
make u-boot.pbl
Now the process is:
1: make board_name
for example:
make T4240QDS_SDCARD
Also, updated
Dear Lukasz Majewski,
New dfu_init_env_entities() function has been extracted from cmd_dfu.c and
stored at dfu core.
This is a dfu centric code, so it shall be processed in the core.
Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2
Signed-off-by: Lukasz Majewski
Hi Marek,
Dear Lukasz Majewski,
New dfu_init_env_entities() function has been extracted from
cmd_dfu.c and stored at dfu core.
This is a dfu centric code, so it shall be processed in the core.
Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2
Signed-off-by: Lukasz Majewski
This patch adds basic board support for SMDK5420 board.
These patches are tested for booting fine on EVT1 SMDK5420.
Changes in V2:
- Corrected a compilation issue for SMDK5420.
Changes in V3:
- Add patch to support variable size SPL support
- Add patch to disable SMU for
From: Akshay Saraswat aksha...@samsung.com
Adds base addresses of various IPs and controllers required for
Exynos5420.
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Changes in V2:
- None
Changes in V3:
- None
Create a common board.c file for all functions which are common across
all EXYNOS5 platforms.
exynos_init function is provided for platform cpecific code.
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None
Changes in V3:
- None
This patch intends to add DDR3 initialization code for Exynos5420.
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Changes in V2:
- Corrected a compilation issue for SMDK5250.
Changes in V3:
- None
From: Akshay Saraswat aksha...@samsung.com
Adds code in pinmux and gpio framework to support Exynos5420.
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Changes in V2:
- None
Changes in V3:
- None
Adding the base patch for Exynos based SMDK5420.
This shall enable compilation and basic boot support for
SMDK5420.
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Changes in V2:
- None
Changes in V3:
- None
From: Akshay Saraswat aksha...@samsung.com
This patch modifies UNCON and UFCON values to make s5p
serial support exynos5420 by doing following changes:
* Enable Rx time-out interrupts.
* Make Rx time-out interrupt interval = 32 frame time.
* Enable DMA mode.
* Enable FIFO.
* Make Rx FIFO
From: Akshay Saraswat aksha...@samsung.com
Currently, part of TZPC init code for Exynos5 starts setting DECPROT
from the base address 0x1010 upto 0x1019 but in case of
Exynos5420 we need it to start from 0x0100E and keep end address
same as 0x1019.
Signed-off-by: Rajeshwari S
Adding initial config for SMDK5420 to build and boot U-Boot
over Exynos based SMDK5420.
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Changes in V2:
- None
Changes in V3:
- None
include/configs/smdk5420.h | 316
When variable size SPL is used, the BL1 expects the SPL to be
encapsulated differently: instead of putting the checksum at a fixed
offset in the SPL blob, prepend the blob with a header including the
size and the checksum.
The enhancements include
- adding a command line option, '--vs' to
SMDK5420 has a new Security Management Unit added
for dwmmc driver, hence, configuring the control
registers to support booting via eMMC.
Signed-off-by: Alim Akhtar alim.akh...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V3:
- New patch.
This patch adds support for SMDK5420.
exynos5.dtsi created is a common file which has the nodes common
to both 5420 and 5250.
Signed-off-by: Akshay Saraswat aksha...@samsung.com
Signed-off-by: Rajeshwari S Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None
Changes in V3:
-
Hi Marek Vasut,
On 9/10/2013 22:27, Marek Vasut wrote:
Dear Bo Shen,
Add atmel usb udc driver support porting from Linux kernel.
Using RNDIS gadget driver to test it.
Test OK on at91sam9m10g45ek, at91sam9m10g45ek, and sama5d31ek boards.
It need the patch from: Troy Kisky
Hi Marek Vasut,
On 9/10/2013 22:29, Marek Vasut wrote:
Dear Bo Shen,
Add RNDIS gadget support to test atmel usba udc driver
Signed-off-by: Bo Shen voice.s...@atmel.com
---
Changes in v2:
- Add a common header to hold atmel usba udc information for different
SoCs
---
Add atmel usb udc driver support porting from Linux kernel.
Using RNDIS gadget driver to test it.
Test OK on at91sam9m10g45ek, at91sam9m10g45ek, and sama5d31ek boards.
It need the patch from: Troy Kisky troy.ki...@boundarydevices.com
(usb: gadget: config: fix unaligned access issues)
more
Add RNDIS gadget support to test atmel usba udc driver
Signed-off-by: Bo Shen voice.s...@atmel.com
---
Changes in v3:
- Move this header file along with USB device driver patch
Changes in v2:
- Add a common header to hold atmel usba udc information for different
SoCs
---
From: Troy Kisky troy.ki...@boundarydevices.com
As seen with codesourcery compiler 2010q1, the buf pointer in
usb_request structure is not aligned on 4 bytes boundary causing
data aborts in eth_setup - conf_buf - usb_gadget_config_buf.
Make it as align access to fix this issue.
Signed-off-by:
Add atmel usba udc driver support, porting from Linux kernel
The original code in Linux Kernel information is as following
commit e01ee9f509a927158f670408b41127d4166db1c7
Author: Jingoo Han jg1@samsung.com
Date: Tue Jul 30 17:00:51 2013 +0900
usb: gadget: use dev_get_platdata()
Correct the UDPHS name from UDHPS
Signed-off-by: Bo Shen voice.s...@atmel.com
Acked-by: Marek Vasut ma...@denx.de
---
Changes in v3:
- Add Acked-by from Marek Vasut
Changes in v2:
- None
arch/arm/include/asm/arch-at91/sama5d3.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
Dear Lukasz Majewski,
Hi Marek,
Dear Lukasz Majewski,
New dfu_init_env_entities() function has been extracted from
cmd_dfu.c and stored at dfu core.
This is a dfu centric code, so it shall be processed in the core.
Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2
Hi Minkyu,
Dear Piotr Wilczek,
On 30/08/13 15:00, Piotr Wilczek wrote:
Dear Minkyu Kang,
-Original Message-
From: Minkyu Kang [mailto:mk7.k...@samsung.com]
Sent: Friday, August 30, 2013 6:39 AM
To: Piotr Wilczek
Cc: u-boot@lists.denx.de; Kyungmin Park; Lukasz Majewski
This patch set adds I2S-0 support and retains I2S-1 support.
The default i2s channel can be selected through DT.
Changes in V3:
- Followed proper indentations
Changes in V2:
- Enabled I2S-0 support through DT
- Retained I2S-1 support
Changes in V1:
- Added I2S-0
This patch makes the necessary changes for making use of
I2S0 channel instead of I2S1 channel on smdk board. This
changes are done to maintain the uniformity to use I2S0 channel.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c | 61
This patch enables default I2S0 channel.And I2S platform
parameter has been moved to a common file viz exynos5.dtsi.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
arch/arm/dts/exynos5250.dtsi | 19 +++
board/samsung/dts/exynos5250-smdk5250.dts | 13
This patch makes required changes to make use
of I2S0 channel instead of I2S1 channel on exynos5250.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
arch/arm/include/asm/arch-exynos/i2s-regs.h |6
drivers/sound/samsung-i2s.c | 45
This patch modifies the MAX98095 audio codec to support
I2S0 channel in codec slave mode.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
drivers/sound/max98095.c | 155 +-
drivers/sound/max98095.h | 10 ++-
drivers/sound/sound.c|
This patch modifies the WM8994 codec to support I2S0 channel
in codec slave mode
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
drivers/sound/sound.c| 17 ++--
drivers/sound/wm8994.c | 167 +++---
Hello Mr Jaehoon,
I have done the changes as suggested by you and resubmitted
all 5 patches. Request you to verify them and let me know if
there are any issues.
Regards,
-Krishna
--
From: Jaehoon Chung jh80.ch...@samsung.com
Sent: Wednesday,
If the DDR3 module supports industrial temperature range and requires
the x2 refresh rate for that temp range, the refresh period must be
3.9us instead of 7.8 us.
This was successfuly tested on kmp204x board with some MT41K128M16 DDR3
RAM chips (no module used, chips directly soldered on board
When exporting the new memsize without reserved PRAM area, the -Wformat
option produces a warning since %ld is used for snprintf and bi_memsize
is phys_size_t.
This patch removes this warning for all PRAM PowerPC boards.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
This can be useful if one wants to disable an interface in u-boot
because u-boot should not manage it but then later reenable it for FDT
fixing or if the kernel uses this interface.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
Changes in v3:
- add a call to
This series includes all the needed patches to run u-boot on Keymile's
kmp204x reference design.
The kmp204x is a reference design based on Freescale's P2040/P2041 SoC.
It is supposed to be a reference platform for future boards. There is
currently only one board that is based on this design
This is necessary with the new I2C subystem that was introduced lately.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
Changes in v3: None
Changes in v2: None
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git
This must be defined by a board support file that want to use the
keymile common.c board_eth_init function that requires ethernet_present
to be defined.
Currently all the km architectures use it but the kmp204x architecture
later supported in this series does use another board_eth_init function
The ip kernel parameter had a typo in it (we've been lucky that it has
worked until now).
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
Changes in v3: None
Changes in v2: None
include/configs/km/keymile-common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
NAND_ECC_SOFT was the only option available while the SOFT_BCH option
may also be used.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
Acked-by: Scott Wood scottw...@freescale.com
---
Changes in v3: None
Changes in v2: None
drivers/mtd/nand/fsl_elbc_nand.c | 6 +-
1 file
This must be defined for all the keymile boards that use the common
i2c_abort function that is used to reset the I2C bus. These are
currently km82xx and km_arm boards.
The km83xx boards use other functions and thus do not need this.
This patch removes the CONFIG_SYS_I2C_INIT_BOARD from
This patch introduces the support for Keymile's kmp204x reference
design. This design is based on Freescale's P2040/P2041 SoC.
The peripherals used by this design are:
- DDR3 RAM with SPD support
- SPI NOR Flash as boot medium
- NAND Flash
- 2 PCIe busses (hosts 1 and 3)
- 3 FMAN Ethernet devices
It must be set to a different value for the later add kmp204x
architecture, because we are restricted to 1MB SRAM.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
Changes in v3:
- Add SYS_MALLOC_LEN to km_arm.h as well, as it was omitted before.
Changes in v2: None
This allows to share some common code for the boards that use a corenet
base SoC.
Two different versions of the function are available in
fsl_corenet_serdes.c and fsl_corenet2_serdes.c files.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
Changes in v3: None
Changes in v2:
On Wed, 11 Sep 2013 12:04:26 +0200 Marek Vasut ma...@denx.de wrote,
Dear Lukasz Majewski,
Hi Marek,
Dear Lukasz Majewski,
New dfu_init_env_entities() function has been extracted from
cmd_dfu.c and stored at dfu core.
This is a dfu centric code, so it shall be
Dear Lukasz Majewski,
On Wed, 11 Sep 2013 12:04:26 +0200 Marek Vasut ma...@denx.de wrote,
Dear Lukasz Majewski,
Hi Marek,
Dear Lukasz Majewski,
New dfu_init_env_entities() function has been extracted from
cmd_dfu.c and stored at dfu core.
This is a dfu
Dear Bo Shen,
Add atmel usb udc driver support porting from Linux kernel.
Using RNDIS gadget driver to test it.
Test OK on at91sam9m10g45ek, at91sam9m10g45ek, and sama5d31ek boards.
It need the patch from: Troy Kisky troy.ki...@boundarydevices.com
(usb: gadget: config: fix unaligned
New dfu_init_env_entities() function has been extracted from cmd_dfu.c and
stored at dfu core.
This is a dfu centric code, so it shall be processed in the core.
Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Tested-by: Heiko Schocher
Hi Minkyu,
On Wed, 11 Sep 2013 11:28:54 +0900, Minkyu Kang mk7.k...@samsung.com
wrote:
Dear Albert,
The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17
18:24:13 +0200)
are available in
a bit of terminological pedantry but would it be more intuitive to
rename the TI-related findfdt environment variable to something like
selectfdt or identifyfdt or determinefdt or ... you get the
idea.
in my mind, find normally implies to go out and *find* something;
that is, to search for
Hi Jaehoon Chung,
Thank you for comments,
On Wed, Sep 11, 2013 at 11:31 AM, Jaehoon Chung jh80.ch...@samsung.com wrote:
On 09/11/2013 02:28 PM, Rajeshwari Birje wrote:
Hi All,
Please do let me know if any comments on the same.
Regards,
Rajeshwari Shinde.
On Thu, Aug 29, 2013 at 4:34
-原始邮件-
发件人: Wolfgang Denk w...@denx.de
发送时间: 2013年9月11日 星期三
收件人: feng...@phytium.com.cn
抄送: u-boot@lists.denx.de, tr...@ti.com, albert.u.b...@aribaud.net
主题: Re: [PATCH v7 0/5] arm64 patch
Dear feng...@phytium.com.cn,
In message
From: Markus Niebel markus.nie...@tqs.de
Currently the dual cora variant is detected and displayed as quad core.
Add a define for MXC_CPU_MX6DUAL and implement the same SCU based
approach done for MX6DL / MX6S
Signed-off-by: Markus Niebel markus.nie...@tqs.de
---
arch/arm/cpu/armv7/mx6/soc.c
From: Markus Niebel markus.nie...@tqs.de
according to the manual frequency of PLL2 PFD2 is 396.000.000
instead of 400.000.000
Signed-off-by: Markus Niebel markus.nie...@tqs.de
---
arch/arm/include/asm/arch-mx6/crm_regs.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
-原始邮件-
发件人: Scott Wood scottw...@freescale.com
发送时间: 2013年9月10日 星期二
收件人: FengHua feng...@phytium.com.cn
抄送: u-boot@lists.denx.de, tr...@ti.com
主题: Re: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
On Sat, 2013-09-07 at 22:56 +0800, FengHua wrote:
Fisrt, thank scott for
On 09/11/2013 12:13 AM, Stefano Babic wrote:
Hi York,
On 11/09/2013 00:14, York Sun wrote:
+static int imximage_generate(struct mkimage_params *params,
+ struct image_type_params *tparams)
+{
+ struct imx_header *imxhdr;
+ size_t alloc_len;
+ struct stat sbuf;
+ char
Adding System Manager driver which will configure the
pin mux for real hardware Cyclone V development kit
(not Virtual Platform)
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Acked-by: Dinh Nguyen dingu...@altera.com
Cc: Wolfgang Denk w...@denx.de
CC:
Adding the generated pin mux configuration by Preloader
Generator tool
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Acked-by: Dinh Nguyen dingu...@altera.com
Cc: Wolfgang Denk w...@denx.de
CC: Pavel Machek pa...@denx.de
Cc: Dinh Nguyen dingu...@altera.com
On Wed, 2013-09-11 at 09:24 +0200, Stefano Babic wrote:
Hi Scott,
On 10/09/2013 22:11, Scott Wood wrote:
Sure.
Acked-by: Scott Wood scottw...@freescale.com
I'm curious who's been doing these patchwork assignments and what
they're basing it on.
I think that everyone of us
Dear Prabhakar Kushwaha,
In message 1378880082-22319-1-git-send-email-prabha...@freescale.com you
wrote:
T1040QDS is a high-performance computing evaluation, development and
test platform supporting the T1040 QorIQ Power Architecture™ processor.
Please fix this checkpatch issue:
WARNING:
Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the
following hang happens if the HDMI cable is not connected or the 'panel'
variable is not set:
U-Boot 2013.10-rc2-12978-g47ac53d-dirty (Sep 11 2013 - 15:07:38)
Hi Fabio,
Le Wed, 11 Sep 2013 16:54:10 -0300,
Fabio Estevam fabio.este...@freescale.com a écrit :
Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the
following hang happens if the HDMI cable is not connected or the 'panel'
variable is not set:
U-Boot
From: Fabio Estevam fabio.este...@freescale.com
Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the
following hang happens if the HDMI cable is not connected or the 'panel'
variable is not set:
U-Boot 2013.10-rc2-12978-g47ac53d-dirty (Sep 11 2013 - 15:07:38)
From: Fabio Estevam fabio.este...@freescale.com
If a HDMI cable is not connected, the following message is seen on boot:
CPU: Freescale i.MX6Q rev1.1 at 792 MHz
Reset cause: POR
Board:
On Wed, Sep 11, 2013 at 5:44 PM, Eric Bénard e...@eukrea.com wrote:
instead of providing an empty function you could fix the problem in the
code calling this function by changing
if (dev-detect(dev))
to something like
if (dev-detect dev-detect(dev))
Thanks, Eric. This is a better solution.
On Wed, 2013-09-11 at 22:13 +0800, FengHua wrote:
-原始邮件-
发件人: Scott Wood scottw...@freescale.com
发送时间: 2013年9月10日 星期二
收件人: FengHua feng...@phytium.com.cn
抄送: u-boot@lists.denx.de, tr...@ti.com
主题: Re: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
On Sat, 2013-09-07
On Wed, 2013-09-11 at 00:58 -0500, Liu Shengzhou-B36685 wrote:
Scott, please review new version http://patchwork.ozlabs.org/patch/273539/
-Original Message-
From: Wood Scott-B07421
Sent: Wednesday, September 04, 2013 11:57 PM
To: Liu Shengzhou-B36685
Cc: Wood Scott-B07421;
On Wed, 2013-09-11 at 19:33 -0500, Scott Wood wrote:
On Wed, 2013-09-11 at 00:58 -0500, Liu Shengzhou-B36685 wrote:
Scott, please review new version http://patchwork.ozlabs.org/patch/273539/
-Original Message-
From: Wood Scott-B07421
Sent: Wednesday, September 04, 2013
On Wed, 2013-09-11 at 07:48 +0200, Stefan Roese wrote:
On 10.09.2013 22:24, Scott Wood wrote:
On Sat, 2013-09-07 at 14:11 +0200, Stefan Roese wrote:
On 04.09.2013 16:16, Paul Burton wrote:
This patchset corrects a few issues I've had whilst using UBI with U-boot.
The first 3 are bug
On Tue, 2013-09-10 at 16:12 +0800, feng...@phytium.com.cn wrote:
+/*
+ * Enter Exception.
+ * This will save the processor state that is X0~X29/LR/SP/ELR/PSTATE
+ * to the stack frame.
+ */
+#define EXCEPTION_ENTRY \
asm macros are nicer.
+ sub sp, sp,
hi,
The following codes are originated from linux kernel. I am not sure whether
license issues exist.
I list the original codes at the bottom. Please check it and give me some
advice.
If license issues actually exist I would like to remove it. The exception
state push action just should
-原始邮件-
发件人: Scott Wood scottw...@freescale.com
发送时间: 2013年9月12日 星期四
收件人: feng...@phytium.com.cn
抄送: u-boot@lists.denx.de, tr...@ti.com
主题: Re: [U-Boot] [PATCH v7 1/5] core support of arm64
On Tue, 2013-09-10 at 16:12 +0800, feng...@phytium.com.cn wrote:
+/*
+ * Enter
Hi All,
Please do let me if any review comments on these patches.
On Wed, Sep 11, 2013 at 3:31 PM, Rajeshwari S Shinde
rajeshwar...@samsung.com wrote:
This patch adds basic board support for SMDK5420 board.
These patches are tested for booting fine on EVT1 SMDK5420.
Changes in V2:
-
On 12.09.2013 02:55, Scott Wood wrote:
Scott, these patches are assigned to you in patchwork. If you are okay
with the NAND side (and everything else), then please feel free to push
all 4 patches via your repository.
Patch 1 looks OK to me (at least to the extent that it's just bringing
code
89 matches
Mail list logo
