Re: [U-Boot] [PATCH] imx: correct speed grading info for i.MX6UL

Hi Stefano, On Mon, May 09, 2016 at 09:30:28AM +0200, Stefano Babic wrote: >On 03/05/2016 05:13, Peng Fan wrote: >> Correct speed grading info for i.MX6UL >> >> Signed-off-by: Peng Fan >> Cc: Stefano Babic >> --- >> arch/arm/cpu/armv7/mx6/soc.c | 15

Re: [U-Boot] Porting Linux's MTD/NAND changes into U-Boot

On Mon, 2016-05-16 at 14:02 +0200, Boris Brezillon wrote: > Hi Scott, > > On Tue, 03 May 2016 00:06:45 -0500 > Scott Wood wrote: > > > I usually do syncs when someone complains about needing a sync. Every > > release > > seems a bit much. I'll try to do one soon. > > Sorry

Re: [U-Boot] [PATCH v2 00/18] x86: acpi: Support installation of Ubuntu/Windows and boot Windows

Hi Simon, On Wed, May 11, 2016 at 10:44 PM, Bin Meng wrote: > SeaBIOS can be loaded by U-Boot to aid the installation of Ubuntu > and Windows to a SATA drive and boot from there. But till now this > is broken. The installation either hangs forever or just crashes. > > This

Re: [U-Boot] [RFC] [V2] [PATCH 0/8] a83t: Add initial PSCI / SMP support

Hi, On Wed, May 18, 2016 at 3:34 AM, wrote: > Updated to address concerns raised on mailing list. > > I won't have time to work on this further for a while; please feel free to > use / merge anything from the series that > is acceptable. I'll try to make time

Re: [U-Boot] [PATCH 4/8] sun8i: Add TZPC setup for A83t

On Wed, May 18, 2016 at 3:25 AM, Timothy Pearson wrote: > On 05/17/2016 12:27 AM, Chen-Yu Tsai wrote: >> Hi, >> >> On Tue, May 17, 2016 at 10:39 AM, wrote: >> >> Description please. >> >>> Signed-off-by: Timothy Pearson

Re: [U-Boot] [PATCH 3/8] sun8i: Extend stack size to allow for up to 8 CPUs

On Wed, May 18, 2016 at 3:19 AM, Timothy Pearson wrote: > On 05/17/2016 12:21 AM, Chen-Yu Tsai wrote: >> Hi, >> >> On Tue, May 17, 2016 at 10:38 AM, wrote: >>> --- >>> arch/arm/cpu/armv7/psci.S | 1 + >>>

[U-Boot] [PATCH] efi_loader: gop: Don't expose fb address

Recently Linux is gaining support for efifb on AArch64 and that support actually tries to make use of the frame buffer address we expose to it via gop. While this wouldn't be bad in theory, in practice it means a few bad things 1) We expose 16bit frame buffers as 32bit today 2) Linux can't

[U-Boot] [PATCH] efi_loader: Clean up system table on exit

We put the system table into our runtime services data section so that payloads may still access it after exit_boot_services. However, most fields in it are quite useless once we're in that state, so let's just patch them out. With this patch we don't get spurious warnings when running EFI

Re: [U-Boot] [RFC PATCH] net: macb: Fix build error for CONFIG_DM_ETH enabled

+Joe On 16 May 2016 at 23:11, Wenyou Yang wrote: > Use the right phy_connect() prototype for CONFIGF_DM_ETH. > Support to get the phy interface from dt and set GMAC_UR. > > Signed-off-by: Wenyou Yang > --- > This patch is based on the patch set, >

Re: [U-Boot] [PATCH 2/2] reset: implement a reset test

Hi Stephen, On 17 May 2016 at 10:46, Stephen Warren wrote: > From: Stephen Warren > > This adds a sandbox reset implementation (provider), a test client > device, instantiates them both from Sandbox's DT, and adds a DM test > that excercises

Re: [U-Boot] [PATCH 1/2] Add a reset driver framework/uclass

Hi Stephen, On 17 May 2016 at 10:46, Stephen Warren wrote: > From: Stephen Warren > > A reset controller is a hardware module that controls reset signals that > affect other hardware modules or chips. > > This patch defines a standard API that connects

Re: [U-Boot] [PATCH 12/12] Drop HAVE_GENERIC_BOARD and SYS_GENERIC_BOARD options

On 15/05/2016 02:49, Simon Glass wrote: These are no longer used. The migration is complete. Drop these options. Signed-off-by: Simon Glass --- arch/Kconfig | 32 1 file changed, 32 deletions(-) Acked-by: Angelo Dureghello

Re: [U-Boot] [PATCH 07/12] m68k: Drop unused code in u-boot.h

On 15/05/2016 02:49, Simon Glass wrote: Since generic board init is enabled, this is not used. Drop it. Signed-off-by: Simon Glass --- arch/m68k/include/asm/u-boot.h | 39 --- 1 file changed, 39 deletions(-) Acked-by: Angelo

Re: [U-Boot] [u-boot-release] [PATCH 06/10][v3] armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC

On 05/17/2016 12:47 PM, Edward L Swarthout wrote: > From: York Sun [mailto:york@nxp.com] >> On 05/17/2016 09:35 AM, Edward L Swarthout wrote: >>> From: Prabhakar Kushwaha: --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c + unsigned int svr, ver; >>> ... + svr =

Re: [U-Boot] [u-boot-release] [PATCH 06/10][v3] armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC

From: York Sun [mailto:york@nxp.com] > On 05/17/2016 09:35 AM, Edward L Swarthout wrote: > > From: Prabhakar Kushwaha: > >> --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c > >> + unsigned int svr, ver; > > ... > >> + svr = gur_in32(>svr); > >> + ver = SVR_SOC_VER(svr); > >> + if

[U-Boot] [V2] [PATCH 5/8] sun8i: Display silicon revision of A83t processors

There are two versions of the A83t processor; per the provided Linux code from Allwinner revisions A and B can be distingushed by the lower bit of the SRAM ID register. The distinction is important because revision B requires a SMP bringup workaround. Signed-off-by: Timothy Pearson

[U-Boot] [V2] [PATCH 3/8] sun8i: Extend stack size to allow for up to 8 CPUs

The existing stack size was only sufficient for four CPUs. Keep lower stack range address page alignment intact, and move the lower stack range address down a page. This has the effect of expanding the stack range by a single page, which is enough for four more CPUs. Signed-off-by: Timothy

[U-Boot] [V2] [PATCH 4/8] sun8i: Add TZPC setup for A83t

This patch enables non-secure access to all system peripherals controlled by the STMA, and additionally sets the secure RAM range to 64k in line with other sunxi devices. Signed-off-by: Timothy Pearson --- arch/arm/cpu/armv7/sunxi/Makefile | 1 +

[U-Boot] [V2] [PATCH 7/8] sun8i: Enable PSCI cpu_on support for A83t

This patch adds support for the PSCI cpu_on command on Allwinner A83t devices. Since cluster 1 is already set up by early init, the majority of this patch focuses on adding multi-cluster support to PSCI and A83t power sequencing. Signed-off-by: Timothy Pearson

[U-Boot] [V2] [PATCH 8/8] a83t: Enable PSCI, non-secure mode, and cluster / cache setup

Now that the groundwork has been laid, enable all the pieces to support PSCI, KVM, and SMP. This has been tested on a mainline Linux kernel, however that kernel hangs for an unknown reason during kthread execution even though all cores start normally. It is currently assumed that this is a

[U-Boot] [V2] [PATCH 6/8] sunxi: Add optional logic to start cluster 1 and the associated CCI-400 ports

Multi-cluster systems require that the CCI be set up if SMP is desired via PSCI later in the boot process. Start cluster 1 and set up the CCI if requested by the SoC configuration. Signed-off-by: Timothy Pearson --- arch/arm/include/asm/arch-sunxi/prcm.h | 3

[U-Boot] [V2] [PATCH 2/8] sun8i: Add CCI-400 definitions

Multi-cluster systems require basic initialization of the cache coherent interconnect to enable SMP via PSCI. Add the requisite definitions for general use. Signed-off-by: Timothy Pearson --- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 3 +++

[U-Boot] [V2] [PATCH 1/8] sun8i: Add A83t SMP definitions

Define number of cores and secure SRAM base in preparation for A83t SMP / PSCI enablement. Signed-off-by: Timothy Pearson --- include/configs/sun8i.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/configs/sun8i.h

[U-Boot] [RFC] [V2] [PATCH 0/8] a83t: Add initial PSCI / SMP support

Updated to address concerns raised on mailing list. I won't have time to work on this further for a while; please feel free to use / merge anything from the series that is acceptable. I'll try to make time again in a month or two to polish the rest of the patches up if needed.

Re: [U-Boot] [PATCH] test/py: Add basic QSPI testing

On 05/17/2016 11:55 AM, Michal Simek wrote: On 17.5.2016 19:30, Stephen Warren wrote: On 05/17/2016 08:05 AM, Michal Simek wrote: This is the first attempt how to test qspi. Detect SPI size. Read it all, random size, erase every block, write random data with random size and read it back, erase

Re: [U-Boot] [PATCH 4/8] sun8i: Add TZPC setup for A83t

On 05/17/2016 12:27 AM, Chen-Yu Tsai wrote: > Hi, > > On Tue, May 17, 2016 at 10:39 AM, wrote: > > Description please. > >> Signed-off-by: Timothy Pearson >> --- >> arch/arm/cpu/armv7/sunxi/Makefile | 1 + >>

Re: [U-Boot] [PATCH 3/8] sun8i: Extend stack size to allow for up to 8 CPUs

On 05/17/2016 12:21 AM, Chen-Yu Tsai wrote: > Hi, > > On Tue, May 17, 2016 at 10:38 AM, wrote: >> --- >> arch/arm/cpu/armv7/psci.S | 1 + >> arch/arm/cpu/armv7/sunxi/psci_sun6i.S | 4 ++-- >> arch/arm/cpu/armv7/sunxi/psci_sun7i.S | 4 ++-- >> 3 files

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

On 05/17/2016 12:00 PM, Michal Simek wrote: On 17.5.2016 19:36, Stephen Warren wrote: On 05/17/2016 11:03 AM, Michal Simek wrote: On 17.5.2016 19:00, Stephen Warren wrote: On 05/17/2016 10:56 AM, Michal Simek wrote: Hi Stephen, On 17.5.2016 18:50, Stephen Warren wrote: On 05/17/2016 07:57

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

On 17.5.2016 19:36, Stephen Warren wrote: > On 05/17/2016 11:03 AM, Michal Simek wrote: >> On 17.5.2016 19:00, Stephen Warren wrote: >>> On 05/17/2016 10:56 AM, Michal Simek wrote: Hi Stephen, On 17.5.2016 18:50, Stephen Warren wrote: > On 05/17/2016 07:57 AM, Michal Simek

Re: [U-Boot] [PATCH] test/py: Add basic QSPI testing

On 17.5.2016 19:30, Stephen Warren wrote: > On 05/17/2016 08:05 AM, Michal Simek wrote: >> This is the first attempt how to test qspi. >> Detect SPI size. Read it all, random size, erase every block, >> write random data with random size and read it back, >> erase the whole qspi and at the end

[U-Boot] Please pull u-boot-dm

Hi Tom, This includes a refinement of the GPIO interface, soft SPI fixes, driver model block-device support (and a legacy driver for non-driver-model code) and a few other things. The changes are fairly major so I'd like to get the maximum possible test window. The following changes since

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

On 05/17/2016 11:03 AM, Michal Simek wrote: On 17.5.2016 19:00, Stephen Warren wrote: On 05/17/2016 10:56 AM, Michal Simek wrote: Hi Stephen, On 17.5.2016 18:50, Stephen Warren wrote: On 05/17/2016 07:57 AM, Michal Simek wrote: If timeout happen it should be reported as fault. Presumably

[U-Boot] AR71xx / AR9331 UART Initialization

Hello, I'm looking for some help fixing a possible issue on AR9331 platforms covered by the AR71xx target. In uBoot we're getting nothing but framing errors over serial. Once Linux initializes the port. everything works fine. Digging in the code, I've been able to find that the Linux driver

[U-Boot] Enumerate Buetooth Dongle via xHCI fails set configuration command

Trying to enumerate a bluetooth dongle. The connected bluetooth dongle has 2 interfaces. Pls see the bottom of the mail for device and config descriptors. We are using interface 0 having 3 end points - Interrupt IN, Bulk OUT and Bulk In. For enumeration we are still using uboot's

Re: [U-Boot] [PATCH] test/py: Add basic QSPI testing

On 05/17/2016 08:05 AM, Michal Simek wrote: This is the first attempt how to test qspi. Detect SPI size. Read it all, random size, erase every block, write random data with random size and read it back, erase the whole qspi and at the end load kernel image via tftp and save it to memory. I

Re: [U-Boot] [u-boot-release] [PATCH 06/10][v3] armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC

From: Prabhakar Kushwaha: > --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c > +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c > unsigned int cpu; > + unsigned int svr, ver; > const u8 core_cplx_pll[8] = { ... > -

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

On 17.5.2016 19:00, Stephen Warren wrote: > On 05/17/2016 10:56 AM, Michal Simek wrote: >> Hi Stephen, >> >> On 17.5.2016 18:50, Stephen Warren wrote: >>> On 05/17/2016 07:57 AM, Michal Simek wrote: If timeout happen it should be reported as fault. >>> >>> Presumably if a timeout occurs, the

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

On 05/17/2016 10:56 AM, Michal Simek wrote: Hi Stephen, On 17.5.2016 18:50, Stephen Warren wrote: On 05/17/2016 07:57 AM, Michal Simek wrote: If timeout happen it should be reported as fault. Presumably if a timeout occurs, the expected text does not appear, i.e. the existing assert fails

[U-Boot] [PATCH v2] SPL: FIT: Enable SPL_FIT_LOAD in RAM based boot mode

Support loading FIT in SPL for RAM bootmode. CONFIG_SPL_LOAD_FIT_ADRESS points to address where FIT image is stored in memory. Signed-off-by: Michal Simek Reviewed-by: Simon Glass --- Changes in v2: - Fix empty line - Fix addr name and remove

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

Hi Stephen, On 17.5.2016 18:50, Stephen Warren wrote: > On 05/17/2016 07:57 AM, Michal Simek wrote: >> If timeout happen it should be reported as fault. > > Presumably if a timeout occurs, the expected text does not appear, i.e. > the existing assert fails anyway? > > Anyway, it's useful to

Re: [U-Boot] [u-boot-release] [PATCH 06/10][v3] armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC

On 05/17/2016 09:35 AM, Edward L Swarthout wrote: > From: Prabhakar Kushwaha: >> --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c >> +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c >> unsigned int cpu; >> +unsigned int svr, ver; >> const u8 core_cplx_pll[8] = { >

Re: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

On 05/17/2016 07:57 AM, Michal Simek wrote: If timeout happen it should be reported as fault. Presumably if a timeout occurs, the expected text does not appear, i.e. the existing assert fails anyway? Anyway, it's useful to point out problems explicitly, so, Acked-by: Stephen Warren

[U-Boot] [PATCH 1/2] Add a reset driver framework/uclass

From: Stephen Warren A reset controller is a hardware module that controls reset signals that affect other hardware modules or chips. This patch defines a standard API that connects reset clients (i.e. the drivers for devices affected by reset signals) to drivers for reset

[U-Boot] [PATCH 2/2] reset: implement a reset test

From: Stephen Warren This adds a sandbox reset implementation (provider), a test client device, instantiates them both from Sandbox's DT, and adds a DM test that excercises everything. Signed-off-by: Stephen Warren --- arch/sandbox/dts/test.dts

Re: [U-Boot] [PATCH 1/4] spi: fsl_qspi: Fix issues on arm64

On 03/14/2016 11:45 PM, Yuan Yao wrote: > From: Yuan Yao > > The address value and size value get from dts "reg" property have type > of u64 on arm64. > If we assign those values to "u32" variables, driver can't work correctly. > Converting the type of those variables to

Re: [U-Boot] [PATCH v2] armv8/ls2080ardb: Update DDR timing to support more UDIMMs

On 05/05/2016 12:29 PM, York Sun wrote: > On 04/06/2016 11:50 PM, Shengzhou Liu wrote: >> Optimize DDR timing for good margins to support new Transcend >> and Apacer DDR4 UDIMM besides current Micron UDIMM. >> >> Verified 1333MT/s, 1600MT/s, 1866MT/s, 2133MT/s rate with >> following UDIMM on

Re: [U-Boot] [PATCH 0/5] Add QSPI support for LS2080A

On 03/14/2016 11:44 PM, Yuan Yao wrote: > From: Yuan Yao > > There is the spansion S25FS-S family flash: s25fs256s1 > on LS2080QDS QSPI. > > Yuan Yao (5): > spi: fsl_qspi: Fix issues on arm64 > spi: fsl_qspi: Assign AMBA mem according CS num in dts > spi: fsl_qspi:

Re: [U-Boot] [PATCH 2/3] fsl-layerscape: spl: fix the macro name of MMC mode

On 04/26/2016 06:55 PM, Gong Qianyu wrote: > There is no MODE_FAT but MODE_FS. Fix it. Actually this macro existed before being renamed by commit 205b4f33cfe58268df7d433f2da515fe660afd9c. No need to resend the patch. I will update the command message when merging. York > > Signed-off-by: Gong

Re: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports

Hi Paul, On 17 May 2016 at 09:58, Paul Burton wrote: > On Tue, May 17, 2016 at 09:54:21AM -0600, Simon Glass wrote: >> > >> > diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c >> > >> > index 28da9dd..e58e6aa 100644 >> > >> > --- a/drivers/serial/ns16550.c

Re: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports

On Tue, May 17, 2016 at 09:54:21AM -0600, Simon Glass wrote: > > >> > diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c > > >> > index 28da9dd..e58e6aa 100644 > > >> > --- a/drivers/serial/ns16550.c > > >> > +++ b/drivers/serial/ns16550.c > > >> > @@ -100,7 +100,11 @@ static void

[U-Boot] [PULL] Please pull u-boot-imx

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed: Prepare v2016.05 (2016-05-16 10:40:32 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to

Re: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports

Hi Daniel, On 17 May 2016 at 09:51, Daniel Schwierzeck wrote: > > 2016-05-17 14:48 GMT+02:00 Paul Burton : > > On Tue, May 17, 2016 at 06:11:22AM -0600, Simon Glass wrote: > >> Hi Paul, > >> > >> On 16 May 2016 at 11:44, Paul Burton

Re: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports

2016-05-17 14:48 GMT+02:00 Paul Burton : > On Tue, May 17, 2016 at 06:11:22AM -0600, Simon Glass wrote: >> Hi Paul, >> >> On 16 May 2016 at 11:44, Paul Burton wrote: >> > If the UART is to be accessed using I/O port accessors (inb & outb) then >> >

Re: [U-Boot] [PATCH v3] armv8/ls2080a: configure PMU's PCTBENR to enable WDT

On 05/16/2016 08:28 PM, Yunhui Cui wrote: > Hi York, > > I think you can move your code into timer_init() in cpu.c and follow the > example of cltbenr. > [Yunhui] During the u_boot imamge compiled by using the ls2080ardb_defconfig > bootup on ls2080ardb, timer_init() cannot be called ... >

Re: [U-Boot] [PATCH 1/3] arm64: optimize __asm_{flush, invalidate}_dcache_all

On 05/17/2016 12:37 AM, Masahiro Yamada wrote: > __asm_dcache_all can directly return to the caller of > __asm_{flush,invalidate}_dcache_all. > > We do not have to waste x16 register here. > > Signed-off-by: Masahiro Yamada > --- > > arch/arm/cpu/armv8/cache.S |

Re: [U-Boot] [PATCH 2/2] powerpc/mpc85xx: T104x: Add nand secure boot target

On 04/01/2016 12:09 AM, Sumit Garg wrote: > For mpc85xx SoCs, the core begins execution from address 0xFFFC. > In non-secure boot scenario from NAND, this address will map to CPC > configured as SRAM. But in case of secure boot, this default address > always maps to IBR (Internal Boot ROM). >

Re: [U-Boot] [PATCH v2] pico-imx6ul: Select CONFIG_HUSH_PARSER option

> From: Fabio Estevam [mailto:fabio.este...@nxp.com] > Sent: Tuesday, May 17, 2016 10:52 AM > To: sba...@denx.de > Cc: Daiane Angolini ; u-boot@lists.denx.de; Fabio > Estevam > Subject: [PATCH v2] pico-imx6ul: Select CONFIG_HUSH_PARSER option > >

Re: [U-Boot] [RFC PATCH] SPL: FIT: Enable SPL_FIT_LOAD in RAM based boot mode

Hello Michal, I have a minor comment. On Thu, Apr 28, 2016 at 11:43 AM, Michal Simek wrote: > Support loading FIT in SPL for RAM bootmode. > CONFIG_SPL_LOAD_FIT_ADRESS points to address where FIT image is stored > in memory. > > Signed-off-by: Michal Simek

[U-Boot] [RFC PATCH] test/py: Add experimental code for mmc testing

More partitions are handled. Save information about saved file to structure. Also use fs_generic commands to handle files. Support fat, ext2 and ext4 filesystems. Signed-off-by: Michal Simek --- Code for work with partitions and FS is quite generic that the same stuff

[U-Boot] [PATCH v2] pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following problem: Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Reported-by: Daiane Angolini Signed-off-by: Fabio Estevam

[U-Boot] [PATCH] test/py: Add basic QSPI testing

This is the first attempt how to test qspi. Detect SPI size. Read it all, random size, erase every block, write random data with random size and read it back, erase the whole qspi and at the end load kernel image via tftp and save it to memory. Signed-off-by: Michal Simek

[U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

If timeout happen it should be reported as fault. Signed-off-by: Michal Simek --- test/py/tests/test_net.py | 3 +++ 1 file changed, 3 insertions(+) diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index 4f4a876c1335..833a8fd5b3e3 100644 ---

[U-Boot] [PATCH] pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following problem: Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help'

[U-Boot] [PATCH 2/2] image: Add boot_get_fpga() to load fpga with bootm

Add function boot_get_fpga() which find and load bitstream to programmable logic if fpga entry is present. Function is supported on Xilinx devices for full and partial bitstreams in BIN and BIT format. Signed-off-by: Michal Simek --- Tests are running on Sandbox and

Re: [U-Boot] [PATCH v2 8/8] board: am335x: Allow to choose serial device dynamically

On 5/17/2016 4:56 PM, Tom Rini wrote: On Tue, May 17, 2016 at 09:49:53AM +0530, Lokesh Vutla wrote: On 5/17/2016 6:11 AM, Tom Rini wrote: On Mon, May 16, 2016 at 11:47:29AM +0530, Lokesh Vutla wrote: Different AM335x based platforms have different serial consoles. As serial console is

[U-Boot] [PATCH 1/2] mkimage: Report information about fpga

Add FIT_FPGA_PROP that user can identify an optional entry for fpga. Signed-off-by: Michal Simek --- common/image-fit.c| 4 +++ common/image.c| 1 + doc/uImage.FIT/multi-with-fpga.its| 67

[U-Boot] [PATCH v2] tools: zynqmpimage: Add Xilinx ZynqMP boot header generation

Add support for the zynqmpimage to mkimage. Only basic functionality is supported without encryption and register initialization with one partition which is filled by U-Boot SPL. For more detail information look at Xilinx ZynqMP TRM. Signed-off-by: Michal Simek

Re: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports

On Tue, May 17, 2016 at 06:11:22AM -0600, Simon Glass wrote: > Hi Paul, > > On 16 May 2016 at 11:44, Paul Burton wrote: > > If the UART is to be accessed using I/O port accessors (inb & outb) then > > using map_physmem doesn't make sense, since it operates in a different

[U-Boot] [PATCH] fpga: Fix typo in function comment

Trivial patch. Signed-off-by: Michal Simek --- drivers/fpga/fpga.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c index d94eb5cc25c4..7e2f3e17a764 100644 --- a/drivers/fpga/fpga.c +++ b/drivers/fpga/fpga.c

[U-Boot] Please pull from u-boot-i2c

Hello Tom, please pull from u-boot-i2c.git master There is a compile fix from Mario, also DM support for fsl_i2c, DM support for TI PCA954X muxes from Michal, a check for the enable status register in the designware i2c driver from Stefan and a fix for the mvtwsi driver, which now does not need

Re: [U-Boot] what means "obj- := __dummy__.o"?

On Sun, 15 May 2016, Robert P. J. Day wrote: > > i'm feeling particularly stupid today in not understanding some of > the things i'm running across. just tripped over this in > board/spear/common/Makefile: > > ... > ifdef CONFIG_SPL_BUILD > # necessary to create built-in.o > obj- :=

Re: [U-Boot] [PATCH] tools: zynqmpimage: Add Xilinx ZynqMP boot header generation

Hi Michal, On 17 May 2016 at 00:27, Michal Simek wrote: > Add support for the zynqmpimage to mkimage. > Only basic functionality is supported without encryption and register > initialization with one partition which is filled by U-Boot SPL. > For more detail information

Re: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports

Hi Paul, On 16 May 2016 at 11:44, Paul Burton wrote: > If the UART is to be accessed using I/O port accessors (inb & outb) then > using map_physmem doesn't make sense, since it operates in a different > memory space. Remove the call to map_physmem when >

Re: [U-Boot] [PATCH v2 2/5] fdt: Document the rest of struct of_bus

On 16 May 2016 at 11:44, Paul Burton wrote: > Provide some documentation for the fields of struct of_bus, for > consistency with that provided for the new match field. > > Signed-off-by: Paul Burton > --- > > Changes in v2: > - New patch. > >

Re: [U-Boot] [PATCH v2 1/5] fdt: Support for ISA busses

Hi Paul, On 16 May 2016 at 11:44, Paul Burton wrote: > Support ISA busses in much the same way as Linux does. This allows for > ISA bus addresses to be translated, and only if CONFIG_OF_ISA_BUS is > selected in order to avoid including the code in builds which won't need

[U-Boot] [PATCH] ARM64: zynqmp: Enable CLK framework

ZynqMP is using fixed clocks now that's why enabling it to be available for drivers. Signed-off-by: Michal Simek --- configs/xilinx_zynqmp_ep_defconfig | 2 ++ configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 2 ++

[U-Boot] [PATCH 2/2] ARM64: zynqmp: Add SPL support support

Support RAM and MMC boot mode in SPL also with SPL_FIT images. In MMC boot mode two boot options are available: 1) Boot flow with ATF(EL3) and full U-Boot(EL2): aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000 -d

[U-Boot] [PATCH 1/2] ARM64: zynqmp: Add missing u-boot, dm-pre-reloc to DTSI

Add missing u-boot,dm-pre-reloc to get IPs initialized. Signed-off-by: Michal Simek --- arch/arm/dts/zynqmp.dtsi | 5 + 1 file changed, 5 insertions(+) diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index c6ba8728075a..619450e1ba92 100644 ---

Re: [U-Boot] [PATCH 0/4] Malta MIPS64 support

2016-05-17 12:56 GMT+02:00 Paul Burton : > This series allows MIPS64 builds for Malta boards, which can be used > either on real Malta boards with a MIPS64 CPU or in QEMU. It prepares by > moving CONFIG_SYS_TEXT_BASE to Kconfig and fixing some 64 bit build > issues that

Re: [U-Boot] [PATCH v2 8/8] board: am335x: Allow to choose serial device dynamically

On Tue, May 17, 2016 at 09:49:53AM +0530, Lokesh Vutla wrote: > > > On 5/17/2016 6:11 AM, Tom Rini wrote: > >On Mon, May 16, 2016 at 11:47:29AM +0530, Lokesh Vutla wrote: > > > >>Different AM335x based platforms have different serial consoles. As serial > >>console is Kconfig option a separate

Re: [U-Boot] [PATCH v2 00/13] usb: dwc3: rework DWC3 and convert UniPhier xHCI driver to DM

Hi Marek, 2016-05-16 23:46 GMT+09:00 Marek Vasut : >> delete mode 100644 drivers/usb/host/xhci-uniphier.c >> > CCing Roger, so he can check this series. I will review it later today > or tomorrow. > 01-03 are probably OK, but 04- might have conflicts with Roger's work. Maybe

Re: [U-Boot] [PATCH v2 5/5] malta: Use device model & tree for UART

2016-05-17 8:40 GMT+02:00 Paul Burton : > On Mon, May 16, 2016 at 08:56:32PM +0200, Daniel Schwierzeck wrote: >> > diff --git a/arch/mips/dts/mti,malta.dts b/arch/mips/dts/mti,malta.dts >> > new file mode 100644 >> > index 000..1dba606 >> > --- /dev/null >> > +++

[U-Boot] [PATCH 3/4] net: pcnet: Make 64 bit safe

Fix the pcnet driver to build safely on 64 bit platforms, in preparation for allowing MIPS64 builds for Malta boards. Signed-off-by: Paul Burton --- drivers/net/pcnet.c | 18 ++ 1 file changed, 10 insertions(+), 8 deletions(-) diff --git

[U-Boot] [PATCH 2/4] MIPS: Fix _ACAST32_ for pointers on MIPS64

When building for MIPS64 and providing a pointer to _ACAST32_, optionally via CPHYSADDR or one of the CKSEGxADDR macros, the cast directly to a 32 bit int leads to compilation warnings such as the following: In file included from ./arch/mips/include/asm/io.h:17:0, from

[U-Boot] [PATCH 4/4] malta: Allow MIPS64 builds

Both real Malta boards & emulators that mimic Malta (eg. QEMU) can support MIPS64 CPUs. Allow MIPS64 builds of U-Boot for such boards, which enables the user to make use of the whole 64 bit address space. Signed-off-by: Paul Burton --- arch/mips/Kconfig

[U-Boot] [PATCH 1/4] MIPS: Move CONFIG_SYS_TEXT_BASE to Kconfig

Move CONFIG_SYS_TEXT_BASE to Kconfig, and add default values in board Kconfig files matching what was present in their config headers. This will make it cleaner to conditionalise the value for Malta based on 32 vs 64 bit builds. Signed-off-by: Paul Burton --- Kconfig

[U-Boot] [PATCH 0/4] Malta MIPS64 support

This series allows MIPS64 builds for Malta boards, which can be used either on real Malta boards with a MIPS64 CPU or in QEMU. It prepares by moving CONFIG_SYS_TEXT_BASE to Kconfig and fixing some 64 bit build issues that affect the ethernet driver, then allows the builds for the Malta board.

[U-Boot] [PATCH] pcie/layerscape: fix bug in bus number computation when setting msi-map

When multiple PCI cards are present in an ls2080a board, the second card does not get its msi-map set up properly due to a bug in computing the bus number. The bus number returned by PCI_BDF() is not the actual PCI bus number, but instead represents a global u-boot PCI bus number. A given bus

Re: [U-Boot] [PATCH 1/4] usb: dwc3: fix kconfig

2016-05-13 21:23 GMT+09:00 Marek Vasut : > On 05/13/2016 02:17 PM, Roger Quadros wrote: >> DWC3 can be used in host only or gadget only mode. >> >> Signed-off-by: Roger Quadros >> --- >> drivers/usb/dwc3/Kconfig | 9 + >> 1 file changed, 5 insertions(+), 4

Re: [U-Boot] [PATCH 1/4] usb: dwc3: fix kconfig

Hi. 2016-05-13 21:17 GMT+09:00 Roger Quadros : > DWC3 can be used in host only or gadget only mode. > > Signed-off-by: Roger Quadros > --- > drivers/usb/dwc3/Kconfig | 9 + > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git

Re: [U-Boot] [PATCH v2 05/13] usb: dwc3: change DWC3 core support code into a driver

On 17/05/16 11:57, Masahiro Yamada wrote: > Hi Roger, > > > 2016-05-17 17:20 GMT+09:00 Roger Quadros : >> Hi Masahiro, >> >> On 16/05/16 15:51, Masahiro Yamada wrote: >>> Synopsys DWC3 IP generally works with an SoC-specific glue layer. >>> DT binding for that is like this: >>>

Re: [U-Boot] [PATCH 1/2] armv8: Support loading 32-bit OS in AArch32 execution state

> On 16.05.16 07:28, Huan Wang wrote: > >> On 13.05.16 10:40, Alison Wang wrote: > >>> To support loading a 32-bit OS, the execution state will change from > >>> AArch64 to AArch32 when jumping to kernel. > >>> > >>> The architecture information will be got through checking FIT image, > >>> then

Re: [U-Boot] [PATCH v2 05/13] usb: dwc3: change DWC3 core support code into a driver

Hi Roger, 2016-05-17 17:20 GMT+09:00 Roger Quadros : > Hi Masahiro, > > On 16/05/16 15:51, Masahiro Yamada wrote: >> Synopsys DWC3 IP generally works with an SoC-specific glue layer. >> DT binding for that is like this: >> >> usb3_glue { >> compatible = "foo,dwc3"; >>

[U-Boot] [PATCH] ARM64: zynqmp: Align gic ranges for 64k in device tree

From: Alexander Graf The GIC ranges in the zynqmp device tree are only 4kb aligned. Since commit 12e14066f we automatically deal with aliases GIC regions though, so we can map them transparently into guests even on 64kb page size systems. This patch makes use of that features and

Re: [U-Boot] [PATCH v2 05/13] usb: dwc3: change DWC3 core support code into a driver

Hi Masahiro, On 16/05/16 15:51, Masahiro Yamada wrote: > Synopsys DWC3 IP generally works with an SoC-specific glue layer. > DT binding for that is like this: > > usb3_glue { > compatible = "foo,dwc3"; > ... > > usb3 { > compatible =

Re: [U-Boot] Remove sh2, sh3, sh4 architecture?

On Mon, 16 May 2016 22:16:35 +0900, Simon Glass wrote: > > Hi, > > On 16 May 2016 at 00:18, Yoshinori Sato wrote: > > On Sun, 15 May 2016 08:19:39 +0900, > > Simon Glass wrote: > >> > >> Hi, > >> > >> On 18 October 2015 at 10:19, Masahiro Yamada > >>

[U-Boot] [PATCH 0/3] arm64: minor fixes of cache operation routine

Masahiro Yamada (3): arm64: optimize __asm_{flush,invalidate}_dcache_all arm64: fix comment "flush & invalidate" arm64: rename __asm_flush_dcache_level to __asm_dcache_level arch/arm/cpu/armv8/cache.S | 26 ++ 1 file changed, 10 insertions(+), 16 deletions(-) --

[U-Boot] [PATCH 2/3] arm64: fix comment "flush & invalidate"

We should say "clean & invalidate", or simply "flush". Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv8/cache.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S index

[U-Boot] [PATCH 1/3] arm64: optimize __asm_{flush, invalidate}_dcache_all

__asm_dcache_all can directly return to the caller of __asm_{flush,invalidate}_dcache_all. We do not have to waste x16 register here. Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv8/cache.S | 10 ++ 1 file changed, 2 insertions(+), 8 deletions(-)

[U-Boot] [PATCH 3/3] arm64: rename __asm_flush_dcache_level to __asm_dcache_level

Since 1e6ad55c0582 ("armv8/cache: Change cache invalidate and flush function"), this routine can be used for both cache flushing and cache invalidation. So, it is better to not include "flush" in this routine name. Signed-off-by: Masahiro Yamada ---

  1   2   >