> From: Sahil Malhotra
>
> This patch enables the DTB overlay feature for LS platforms.
Could you please add some description what this is doing and for what
this is intended? To have a "DTB overlay feature", it is enough to just
enable CONFIG_OF_LIBFDT_OVERLAY.
Apparently you're adding an
Dear Tom,
In message <2026184146.GF24579@bill-the-cat> you wrote:
>
> Because honestly, the more I read this, the more I think
> https://patchwork.ozlabs.org/project/uboot/patch/2025121152.3470910-1-m=
> ich...@walle.cc/
> is essentially the right direction. There's no reason for 'net
From: Sahil Malhotra
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
From: Sahil Malhotra
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10
Thanks Tom,
Regards,
Sahil Malhotra
-Original Message-
From: Tom Rini
Sent: Tuesday, November 16, 2021 6:29 PM
To: Sahil Malhotra (OSS)
Cc: u-boot-ow...@lists.denx.de; u-boot@lists.denx.de; Sahil Malhotra
Subject: Re: Your message to U-Boot awaits moderator approval
On Tue, Nov 16,
Hi Marek,
I found this cause a synchronous abort on boot on the developerbox
when the env_vars on SPI flash is corrupted. See below log.
Can we revert it? I confirmed that reverting this patch fixes the problem.
Thank you,
[2021-11-17 13:49:19] U-Boot 2021.10-01018-g535870f3b0 (Nov 17 2021 -
Hi Ramon,
> -Original Message-
> From: Ramon Fried
> Sent: 2021年11月17日 12:20
> To: Joakim Zhang
> Cc: Joe Hershberger ; U-Boot Mailing List
> ; Ye Li ; Patrick Delaunay
> ; Daniil Stas ;
> Stephen Warren
> Subject: Re: [PATCH] net: eqos: connect and config PHY from probe stage
>
On Tue, Nov 16, 2021 at 1:02 PM Joakim Zhang wrote:
>
>
> > -Original Message-
> > From: Ramon Fried
> > Sent: 2021年11月16日 18:45
> > To: Joakim Zhang
> > Cc: Joe Hershberger ; U-Boot Mailing List
> > ; Ye Li ; Patrick Delaunay
> > ; Daniil Stas ;
> > Stephen Warren
> > Subject: Re:
I’m doing some development on an AM335x ARM CPU and want to run
applications in the U-Boot command prompt. My problem: the code is much
slower in U-Boot than it is in Linux. I was wondering if U-Boot is able to
set clock settings and if there's a way that I can tweak them to improve
performance of
On Tue, Nov 16, 2021 at 07:48:59PM -0700, Simon Glass wrote:
> Hi Takahiro,
>
> On Tue, 16 Nov 2021 at 19:31, AKASHI Takahiro
> wrote:
> >
> > Simon,
> >
> > On Mon, Nov 01, 2021 at 03:41:50PM +0900, AKASHI Takahiro wrote:
> > > Hello Simon,
> > >
> > > On Sun, Oct 31, 2021 at 09:07:01PM -0600,
From: chao zeng
When operating the write-protection flash,spi_flash_std_write() and
spi_flash_std_erase() would return wrong result.The flash is protected,
but write or erase the flash would show "OK".
Check the flash write protection state before operating the flash
and give a prompt to show
Hi Takahiro,
On Tue, 16 Nov 2021 at 19:31, AKASHI Takahiro
wrote:
>
> Simon,
>
> On Mon, Nov 01, 2021 at 03:41:50PM +0900, AKASHI Takahiro wrote:
> > Hello Simon,
> >
> > On Sun, Oct 31, 2021 at 09:07:01PM -0600, Simon Glass wrote:
> > > This is a patch for Takahiro to look at, just for
Hi Heinrich,
On Tue, 16 Nov 2021 at 04:08, Ilias Apalodimas
wrote:
>
> On Mon, Nov 15, 2021 at 08:30:06PM +0100, Heinrich Schuchardt wrote:
> > Before we can start measuring the TPM must be cleared. Do this in the
> > post_probe() method of the uclass.
> >
> > Signed-off-by: Heinrich Schuchardt
On Mon, 15 Nov 2021 at 11:07, Heinrich Schuchardt
wrote:
>
> Test that the return value of snprintf() is correct in the case of
> truncation.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> test/print_ut.c | 18 ++
> 1 file changed, 18 insertions(+)
>
Reviewed-by: Simon Glass
Hi Heinrich,
On Tue, 16 Nov 2021 at 10:59, Heinrich Schuchardt
wrote:
>
> Fix obvious typos. Use US spelling consistently.
Typos are good to fix but we should accept English spelling.
Regards,
Simon
>
> Signed-off-by: Heinrich Schuchardt
> ---
> doc/develop/trace.rst | 16
Hi Heinrich,
On Sun, 14 Nov 2021 at 02:46, Heinrich Schuchardt wrote:
>
> On 11/14/21 04:21, Simon Glass wrote:
> > This converts the following to Kconfig:
> > CONFIG_PHYSMEM
> >
> > Signed-off-by: Simon Glass
> > ---
> >
> > README | 8
> > arch/Kconfig
Hi Heinrich,
On Sun, 14 Nov 2021 at 02:32, Heinrich Schuchardt wrote:
>
> On 11/14/21 04:21, Simon Glass wrote:
> > At present there are Kconfig options for tracing, but sandbox uses
> > plain #defines to set them. Correct this and make the tracing command
> > default to enabled so that this is
Simon,
On Mon, Nov 01, 2021 at 03:41:50PM +0900, AKASHI Takahiro wrote:
> Hello Simon,
>
> On Sun, Oct 31, 2021 at 09:07:01PM -0600, Simon Glass wrote:
> > This is a patch for Takahiro to look at, just for illustration. Not ready
> > for review.
>
> Thank you for posting the draft.
> At a first
On Thu, Oct 21, 2021 at 09:08:44PM -0600, Simon Glass wrote:
> This is a complicated set of #defines and it is painful to convert to a
> text file. We can (once pending patches are applied) provide the same
> functionality with bootmethod. Drop this for sandbox to allow conversion
> to a
On Tue, Nov 16, 2021 at 01:19:10PM +0100, Heinrich Schuchardt wrote:
> On 11/16/21 05:32, AKASHI Takahiro wrote:
> > Abstract common routines to make the code easily understandable.
> > No functional change.
> >
> > Signed-off-by: AKASHI Takahiro
> > Reviewed-by: Simon Glass
> > ---
> >
On Tue, Nov 16, 2021 at 02:58:39PM +0100, Heinrich Schuchardt wrote:
> On 11/16/21 13:20, Heinrich Schuchardt wrote:
> > On 11/16/21 05:32, AKASHI Takahiro wrote:
> > > We want to always build mkeficapsule if tools-only_defconfig is used.
> > >
> > > Signed-off-by: AKASHI Takahiro
> >
> >
Hi Heinrich,
On Wed, 17 Nov 2021 at 01:24, Ilias Apalodimas
wrote:
>
> When initializing the final event table in create_final_event() we are
> setting the initial buffer position to sizeof(*final_event). Although
> we clear the buffer correctly and won't cause any problems, we should
> start
When initializing the final event table in create_final_event() we are
setting the initial buffer position to sizeof(*final_event). Although
we clear the buffer correctly and won't cause any problems, we should
start logging events starting from zero.
While at it add a cast when defining the
Hi Pali,
On Tue, Nov 16, 2021 at 2:37 PM Pali Rohár wrote:
>
> On Tuesday 16 November 2021 14:26:56 Tony Dinh wrote:
> > Hi Pali,
> >
> > While we are at it, this default should be changed in
> > drivers/usb/host/Kconfig.
> >
> > config USB_XHCI_MVEBU
> > bool "MVEBU USB 3.0 support"
>
On Tuesday 16 November 2021 14:26:56 Tony Dinh wrote:
> Hi Pali,
>
> While we are at it, this default should be changed in
> drivers/usb/host/Kconfig.
>
> config USB_XHCI_MVEBU
> bool "MVEBU USB 3.0 support"
> default y
>
> Setting this default correctly will save a couple
Hi Pali,
While we are at it, this default should be changed in drivers/usb/host/Kconfig.
config USB_XHCI_MVEBU
bool "MVEBU USB 3.0 support"
default y
Setting this default correctly will save a couple Kbytes for other boards.
default y if ARCH_MVEBU
Thanks,
Tony
On Fri,
On Mon, Nov 15, 2021 at 11:45:51PM +0100, Michael Walle wrote:
> Nowadays, u-boot (when CONFIG_NET_RANDOM_ETHADDR is set) will set
> enetaddr to a random value if not set and then pass the randomly
> generated MAC address to linux.
First, for clarity I'm not nak'ing this. I kind of would like
On Tue, Nov 16, 2021 at 04:41:46PM +0800, chaochao wrote:
>
> On 2021/11/15 22:02, Jagan Teki wrote:
> > On Mon, Nov 15, 2021 at 6:51 PM chaochao2021...@163.com
> > wrote:
> > >
> > > On 2021/11/15 13:57, tudor.amba...@microchip.com wrote:
> > >
> > > Hi,
> > >
> > > + Michael
> > >
> > > On
Hello!
On Tuesday 16 November 2021 20:05:07 Loic Poulain wrote:
> Hi Pali,
>
> Sorry for the late reply,
>
> On Mon, 27 Sept 2021 at 22:04, Pali Rohár wrote:
> >
> > On Thursday 19 August 2021 13:13:06 Loic Poulain wrote:
> > > This command allows to start CDC ACM function and redirect console
On Tue, Nov 16, 2021 at 03:11:19PM -0300, Ariel D'Alessandro wrote:
> Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
>
> - 1GiB DDR4 RAM
> - 16 GiB eMMC
> - SD card
> - Gigabit ethernet
> - USBOTG1 peripheral - fastboot
>
> Signed-off-by: Ariel D'Alessandro
Reviewed-by:
On Tue, Nov 16, 2021 at 03:46:44PM +0100, Michal Simek wrote:
> Hi Tom,
>
> Please pull these changes to your tree. CI loop doesn't show any issue with
> these patches.
>
> Thanks,
> Michal
>
> The following changes since commit fb1018106a7bbb1a0d723029f6760b1b1b4d306d:
>
> Merge branch
On Fri, Nov 12, 2021 at 06:37:47PM +0300, Andy Shevchenko wrote:
> Fix spelling issues in README.usb.
>
> Signed-off-by: Andy Shevchenko
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Nov 10, 2021 at 03:04:40PM +0100, Pierre-Clément Tosi wrote:
> Remove the extra (empty) argument passed to str8w, causing the following
> error:
>
>:40:47: error: too many positional arguments
> str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
>
On Wed, Nov 10, 2021 at 09:40:07AM +0900, Masami Hiramatsu wrote:
> Fix dfu_alt_info to use nor1 instead of the device name.
> This reverts a part of commit 59bd18d4c4d7 ("configs: synquacer:
> Remove mtdparts settings and update DFU setting") because the
> commit a4f2d8341455 ("mtd: spi: nor:
On Mon, Nov 08, 2021 at 09:03:38PM +0300, Andy Shevchenko wrote:
> Compiler is not happy:
>
> common/image-board.c: In function ‘boot_get_kbd’:
> common/image-board.c:902:17: warning: implicit declaration of function
> ‘do_bdinfo’ [-Wimplicit-function-declaration]
> 902 |
On Fri, Nov 05, 2021 at 04:20:24PM +0100, Angelo Dureghello wrote:
> On some distributions, as Debian GNU 11, this targets fails
> with errors.
>
> Signed-off-by: Angelo Dureghello
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Nov 02, 2021 at 11:36:46AM +0100, Matthias Schiffer wrote:
> "TQ-Systems" is written with a dash.
>
> Signed-off-by: Matthias Schiffer
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Nov 02, 2021 at 11:36:45AM +0100, Matthias Schiffer wrote:
> The subdivision name "TQ Components" hasn't been in use for a long time.
> Rename the vendor directory to "tq", which also matches our Device Tree
> vendor prefix.
>
> Signed-off-by: Matthias Schiffer
Applied to
On Wed, Oct 20, 2021 at 09:31:32PM +, Alistair Delva wrote:
> Cap end of relocations by the binary size.
>
> Linkers like to insert some auxiliary sections between .rela.dyn and
> .bss_start. These sections don't make their way to the final binary, but
> reloc_rela still tries to relocate
Hi Pali,
Sorry for the late reply,
On Mon, 27 Sept 2021 at 22:04, Pali Rohár wrote:
>
> On Thursday 19 August 2021 13:13:06 Loic Poulain wrote:
> > This command allows to start CDC ACM function and redirect console
> > (stdin, stdout, stderr) to USB (acmconsole start). The console can
> > then
On Tue, Nov 16, 2021 at 03:56:45PM +0100, Wolfgang Denk wrote:
> Dear Tom,
>
> In message <2026141855.GD24579@bill-the-cat> you wrote:
> >
> > So, to quote lib/Kconfig:
> > config NET_RANDOM_ETHADDR
> > bool "Random ethaddr if unset"
> > help
> > Selecting this will
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot
Signed-off-by: Ariel D'Alessandro
---
arch/arm/dts/Makefile | 1 +
Changes in v5:
* Fixed documentation.
Changes in v4:
* Added board documentation.
* Cleaned up board config.
Changes in v3:
* Picked device tree from kernel.
* Properly added MAINTAINERS entry.
* Removed CONFIG_SPL_BUILD anti-pattern in board config.
Changes in v2:
* Reordered dt properties
Hi Tom,
On 11/16/21 2:52 PM, Tom Rini wrote:
> On Tue, Nov 16, 2021 at 11:26:01AM -0300, Ariel D'Alessandro wrote:
>
>> Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
>>
>> - 1GiB DDR4 RAM
>> - 16 GiB eMMC
>> - SD card
>> - Gigabit ethernet
>> - USBOTG1 peripheral -
On 11/16/21 2:54 PM, Fabio Estevam wrote:
> On Tue, Nov 16, 2021 at 11:26 AM Ariel D'Alessandro
> wrote:
>
>> --- /dev/null
>> +++ b/doc/board/variscite/imx8mn_var_som.rst
>> @@ -0,0 +1,56 @@
>> +.. SPDX-License-Identifier: GPL-2.0+
>> +
>> +imx8mn_evk
>> +==
>
> Copy and paste error
Fix obvious typos. Use US spelling consistently.
Signed-off-by: Heinrich Schuchardt
---
doc/develop/trace.rst | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/doc/develop/trace.rst b/doc/develop/trace.rst
index 7776c48428..09f5745a90 100644
---
This list is used by checkpatch.pl. The Linux v5.15 version has several
words that where mispelled in U-Boot too.
Signed-off-by: Heinrich Schuchardt
---
scripts/spelling.txt | 365 ++-
1 file changed, 360 insertions(+), 5 deletions(-)
diff --git
On Tue, Nov 16, 2021 at 11:26 AM Ariel D'Alessandro
wrote:
> --- /dev/null
> +++ b/doc/board/variscite/imx8mn_var_som.rst
> @@ -0,0 +1,56 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +imx8mn_evk
> +==
Copy and paste error :-)
On Tue, Nov 16, 2021 at 11:26:01AM -0300, Ariel D'Alessandro wrote:
> Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
>
> - 1GiB DDR4 RAM
> - 16 GiB eMMC
> - SD card
> - Gigabit ethernet
> - USBOTG1 peripheral - fastboot
>
> Signed-off-by: Ariel D'Alessandro
> ---
>
Hello Gaurav,
> -Original Message-
> From: U-Boot On Behalf Of Gaurav Jain
> Sent: Monday, November 15, 2021 8:00 AM
> To: u-boot@lists.denx.de
> Cc: Stefano Babic ; Fabio Estevam ; Peng
> Fan
> ; Simon Glass ; Priyanka Jain
> ; Ye Li ; Horia Geanta
> ; Ji Luo ; Franck Lenormand
> ;
On 11/15/21 8:35 PM, qianfangui...@qq.com wrote:
From: qianfan Zhao
CHUNK_TYPE_RAW buffer is not aligned, and flash sparse images by
fastboot will report "Misaligned operation" if DCACHE is enabled.
Flashing Sparse Image
CACHE: Misaligned operation at range [8428, 84001028]
CACHE:
Dear Tom,
In message <2026141855.GD24579@bill-the-cat> you wrote:
>
> So, to quote lib/Kconfig:
> config NET_RANDOM_ETHADDR
> bool "Random ethaddr if unset"
> help
> Selecting this will allow the Ethernet interface to function
> even when the ethaddr
Dear Tom,
In message <2026141030.GC24579@bill-the-cat> you wrote:
>
> One thing I'm not totally sure on yet is, looking at the README I see:
> "If Ethernet drivers implement the 'write_hwaddr' function, valid MAC
> addresses will be programmed into hardware as part of the initialization
>
Hi Tom,
Please pull these changes to your tree. CI loop doesn't show any issue
with these patches.
Thanks,
Michal
The following changes since commit fb1018106a7bbb1a0d723029f6760b1b1b4d306d:
Merge branch '2021-10-19-assorted-changes' (2021-10-19 20:45:12 -0400)
are available in the Git
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot
Signed-off-by: Ariel D'Alessandro
---
arch/arm/dts/Makefile | 1 +
Changes in v4:
* Added board documentation.
* Cleaned up board config.
Changes in v3:
* Picked device tree from kernel.
* Properly added MAINTAINERS entry.
* Removed CONFIG_SPL_BUILD anti-pattern in board config.
Changes in v2:
* Reordered dt properties alphabetically.
* Removed downstream stuff
On Thu, Nov 11, 2021 at 10:10:57AM +0100, Michael Walle wrote:
> Hi Ramon,
>
> Am 2021-11-09 14:55, schrieb Michael Walle:
> > Am 2021-11-04 22:00, schrieb Ramon Fried:
> >
> > > What's the verdict ? We're keeping this patch ?
> >
> > There was a good point from Grygorii: linux might deal
> >
On Tue, Nov 16, 2021 at 02:33:01PM +0100, Wolfgang Denk wrote:
> Dear Ramon,
>
> In message
> you
> wrote:
> >
> > It appears that Michael has some board and a scenario that *this* bug
> > was working for his best interest, where he can have two distinct MAC
> > addresses, one in U-boot and
Hi Fabio,
On 11/16/21 8:37 AM, Fabio Estevam wrote:
> Hi Ariel,
>
> The patch looks good. Only some minor comments:
>
> On Tue, Nov 16, 2021 at 12:51 AM Ariel D'Alessandro
> wrote:
>>
>> Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
>>
>> - 1GiB DDR4 RAM
>> - 16 GiB eMMC
On 11/16/21 13:20, Heinrich Schuchardt wrote:
On 11/16/21 05:32, AKASHI Takahiro wrote:
We want to always build mkeficapsule if tools-only_defconfig is used.
Signed-off-by: AKASHI Takahiro
Reviewed-by: Heinrich Schuchardt
---
configs/tools-only_defconfig | 1 +
1 file changed, 1
Hi Tom,
On 11/16/21 10:13 AM, Tom Rini wrote:
> On Tue, Nov 16, 2021 at 08:37:06AM -0300, Fabio Estevam wrote:
>> Hi Ariel,
>>
>> The patch looks good. Only some minor comments:
>>
>> On Tue, Nov 16, 2021 at 12:51 AM Ariel D'Alessandro
>> wrote:
>>>
>>> Add support for iMX8MN VAR-SOM-MX8M-NANO
On Tue, Nov 16, 2021 at 03:09:58PM +0800, Art Nikpal wrote:
> On Tue, Nov 16, 2021 at 2:26 AM Heinrich Schuchardt
> wrote:
> >
> > Coverity CID 131256 indicates a possible buffer overflow in label_boot().
> > This would only occur if the size of the downloaded file would exceed 4
> > GiB. But
Dear Ramon,
In message
you wrote:
>
> It appears that Michael has some board and a scenario that *this* bug
> was working for his best interest, where he can have two distinct MAC
> addresses, one in U-boot and one in Linux.
If the Linux environment is supposed to be a specific MAC address
Dear Michal,
In message you wrote:
>
> In perfect world u-boot will just get it and use. And if manufacturer
> doesn't do it properly but want to enable ethernet in u-boot random
> address could be a solution for them.
> And then in Linux where drivers are available you will use the right
Dear Tom,
In message <2025154516.GR24579@bill-the-cat> you wrote:
>
> > One practical use case is board provisioning in the factory, which
> > includes setting up valid produt data like serial number, MAC
> > address etc. Yes, this can be done over serial consone as well, but
> > 1) this is
On Tue, Nov 16, 2021 at 08:37:06AM -0300, Fabio Estevam wrote:
> Hi Ariel,
>
> The patch looks good. Only some minor comments:
>
> On Tue, Nov 16, 2021 at 12:51 AM Ariel D'Alessandro
> wrote:
> >
> > Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:
> >
> > - 1GiB DDR4 RAM
>
The SCRATCHRW4 is only used in secure boot scenario that is unsupported by
our design, so this address can be stolen for storing POST status.
The SCRATCHRW4 is initialized to zero at core rest.
Using a DDR address was unfortunate choice, the DDR at boot time has a
random contend and it happens
Make it in a same way as on the other FOXMC products, this also helps to
avoid unwanted stop caused by some terminal servers that are sending junk
on the serial line.
Signed-off-by: Aleksandar Gerasimovski
---
configs/pg_wcom_expu1_defconfig | 3 +++
configs/pg_wcom_seli8_defconfig | 3 +++
2
Even not used by u-boot, this has to be inline with the hw and kernel dts.
U-boot partition table is defined by MTDPARTS_DEFAULT Kconfig.
Signed-off-by: Aleksandar Gerasimovski
---
arch/arm/dts/ls1021a-pg-wcom-expu1.dts | 15 +--
arch/arm/dts/ls1021a-pg-wcom-seli8.dts | 14
This patch adds default defconfig for u-boot update version, the u-boot
update defconfig is a copy of the default (factory) defconfig with:
- adapted text base and environment addresses
- explicit flag that this is a field updated u-boot version
At the time of implementation this version is only
Field fail-safe u-boot update for pg-wcom-ls102x designs is introduced
with 81fb05e.
This patch enables already added support by:
- Defining default u-boot build as bootpackage (factory) image.
- Defining u-boot update image location according to the EXPU1 NOR layout.
- Extending mtd
This is used by out ESW for reading u-boot build version.
Signed-off-by: Aleksandar Gerasimovski
---
configs/pg_wcom_expu1_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
index 267864f..9e8697d 100644
---
This is used by out ESW for reading u-boot build version.
Signed-off-by: Aleksandar Gerasimovski
---
configs/pg_wcom_seli8_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig
index cb7c680..f13cc55 100644
---
This was probably broken when mainlining, CONFIG_FSL_DEVICE_DISABLE is
not Kconfig but whitelisted.
It's fine to be without flag as this is always enabled for abec1020
(pg-wcom-ls102xa.h)
Signed-off-by: Aleksandar Gerasimovski
---
board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c | 3 +--
1
This patch adds default defconfig for u-boot update version, the u-boot
update defconfig is a copy of the default (factory) defconfig with:
- adapted text base and environment addresses
- explicit flag that this is a field updated u-boot version
At the time of implementation this version is only
Hello!
On Tuesday 16 November 2021 11:35:24 Maciej W. Rozycki wrote:
> Attempt to handle cases with a downstream port of a PCIe switch where
> link training never completes and the link continues switching between
> speeds indefinitely with the data link layer never reaching the active
> state.
Field fail-safe u-boot update procedure for pg-wcom boards is defined and
implemented by 59b3403.
This patch invokes the update procedure for pg-wcom-ls102x designs during
early misc_init_f execution.
Signed-off-by: Aleksandar Gerasimovski
---
board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c |
This patch provides possibility for field fail-safe u-boot updates.
The implementation can be used on all pg-wcom boards that are booting from
parallel NOR flash.
When used in a board design, provided check_for_uboot_update function will
start new u-boot at defined location if updateduboot envvar
On Tue, Nov 16, 2021 at 10:26:37AM +, Sahil Malhotra (OSS) wrote:
> Hi,
>
> I am trying to send some patches on u-boot@lists.denx.de but every time I am
> getting reply "Your message to U-Boot awaits moderator approval".
> Created account on http://patchwork.ozlabs.org/user/, Also
Hi,
I am trying to send some patches on u-boot@lists.denx.de but every time I am
getting reply "Your message to U-Boot awaits moderator approval".
Created account on http://patchwork.ozlabs.org/user/, Also subscribed to the
list u-boot@lists.denx.de.
Tried multiple times, but always getting
> -Original Message-
> From: Ramon Fried
> Sent: 2021年11月16日 18:45
> To: Joakim Zhang
> Cc: Joe Hershberger ; U-Boot Mailing List
> ; Ye Li ; Patrick Delaunay
> ; Daniil Stas ;
> Stephen Warren
> Subject: Re: [PATCH] net: eqos: connect and config PHY from probe stage
> instead of
Hi,
I am trying to send some patches on u-boot@lists.denx.de but every time I am
getting reply "Your message to U-Boot awaits moderator approval".
Created account on http://patchwork.ozlabs.org/user/, Also subscribed to the
list u-boot@lists.denx.de.
Tried multiple times, but always getting
From: Sahil Malhotra
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
Hello all,
I'm new to u-boot and having difficulty while trying to build u-boot for our
test board.(arm64, armv8)
I wanted to try the "SPL falcon" mode". The DDR is not ready yet in the
board.
A small scp chip(cortex-M7) will initialize clk and will load
kernel(including initramfs), dtb,
From: Sahil Malhotra
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10 +
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
From: Sahil Malhotra
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
From: Sahil Malhotra
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10
Hi Ramon,
> -Original Message-
> From: Ramon Fried
> Sent: 2021年11月16日 13:57
> To: Joakim Zhang
> Cc: Joe Hershberger ; U-Boot Mailing List
> ; Ye Li ; Patrick Delaunay
> ; Daniil Stas ;
> Stephen Warren
> Subject: Re: [PATCH] net: eqos: connect and config PHY from probe stage
>
Hi Patrick,
> -Original Message-
> From: Patrick DELAUNAY
> Sent: 2021年11月15日 18:42
> To: Joakim Zhang ; joe.hershber...@ni.com;
> rfried@gmail.com
> Cc: u-boot@lists.denx.de; Ye Li ; daniil.s...@posteo.net;
> swar...@nvidia.com; Christophe ROULLIER
> ; Marek Vasut
> Subject: Re:
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10 +
From: Sahil Malhotra
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
From: Sahil Malhotra
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10
From: Sahil Malhotra
SoCs enabled for DTB Overlay features are:
LS1046A-RDB
LS1043A-RDB
LS1012A-RDB
LS1028A-RDB
LS1088A-RDB
LS2088A-RDB
Signed-off-by: Sahil Malhotra
---
configs/ls1012ardb_tfa_defconfig | 2 ++
configs/ls1028ardb_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 2 ++
From: Sahil Malhotra
This patch enables the DTB overlay feature for LS platforms.
Signed-off-by: Sahil Malhotra
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/dt_optee.h | 10
The EBOOTCNT is a reserved persistent static memory area in QRIO,
and similar to BOOTCNT is intended to be used as boot counter location.
Comparable to BOOTCNT that is reserved for u-boot main bootcount
infrastructure, EBOOTCNT is intended to be used for pg-wcom board
specific purposes (e.g
The PHY for the debug interface was placed on the board for the
pg_wcom_ls102x. Hence only when a piggy is plugged, a RJ45 jack
including magnetics is connected to the MDI of the PHY. Without a
piggy the MDI lines are left floating and it does not make sense to
have an active debug PHY.
In case of
It is necessary to read the status of the PGY_PRES pin
so that u-boot can react accordingly.
Signed-off-by: Rainer Boschung
Signed-off-by: Aleksandar Gerasimovski
---
board/keymile/common/qrio.c | 13 +
board/keymile/common/qrio.h | 1 +
2 files changed, 14 insertions(+)
diff
1 - 100 of 119 matches
Mail list logo