Just adding my name to the list HP Pavillion dv6
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1574125
Title:
[Lenovo G50-70] suspend not working after upgrade
To manage notifications about this
"I used this site to disable WOL before shutdown:
http://www.hecticgeek.com/2012/09/disabling-wake-on-lan-in-ubuntu-might-
save-a-tiny-bit-of-power-on-your-laptop/"
@dngrsone that is the site I used to confirm that my WOL is off. Do you
have an integrated video card as well as the Radeon and can
Re my comment above - I should have said Nouveau Drivers - It is an NVIDEA Card.
I am referring to using the PRIME option to switch from Intel to NVIDEA card
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Last night I switched from the NVIDEA drive to the Intel driver for
graphics and then powered off.
This morning my power drop was only 7% - It dropped from 100% to 93%.
So I am assuming it is a problem with the NVIDEA drivers.
Anyone care to comment
--
You received this bug notification
I am running Linux Mint 17.3 Cinnamon with kernel 4.2.0-18.
I power off using the Menu>Quit>Shut Down sequence. My battery indicator shows
100% at power off
When I reboot in the morning the battery indicator shows 60%.
In trying to ascertain if this was a hardware or software problem I have
It would still appear to be a GRUB2 problem as my disk is recognized
correctly
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/477430
Title:
grub 2 error: out of disk. failed to boot default entries.
Just to add to JuanMatias post.
I have had the same problem for ages. I recently updated my bios so that it
would recognize the 1TB disk correctly, as per this post
http://comments.gmane.org/gmane.comp.boot-loaders.grub.bugs/8433
The bios now does recognize the 1TB disk correctly but the PC
*** This bug is a duplicate of bug 477430 ***
https://bugs.launchpad.net/bugs/477430
I have had the same problem for ages. I recently updated my bios so that it
would recognize the 1TB disk correctly, as per this post
http://comments.gmane.org/gmane.comp.boot-loaders.grub.bugs/8433
The bios
Just to add a comment that I have just tried this with a completely
fresh updated version of 10.04 and it still will not enable me to log in
at all. I am afraid that this means I am stuck here on 8.04 until I can
get a fix for this problem. I really think this is an extreme high
priority bug. How
Frank - I have tried this, and I thank you for pointing me to this on
the Ubuntu Uk podcast, but it would not work for me. I still can only
boot by hitting the reset button on my pc box at the Grub2 error. -
James
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I have now tried to use Linux Mint Debian Edition to see if this problem
is a Ubuntu of a Grub2 problem. I can report that the problem exists
with LMDE as well. Therefore I assume this is a Grub2 problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have now tried to use Linux Mint Debian Edition to see if this problem
is a Ubuntu of a Grub2 problem. I can report that the problem exists
with LMDE as well. Therefore I assume this is a Grub2 problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have now tried to use Linux Mint Debian Edition to see if this problem
is a Ubuntu of a Grub2 problem. I can report that the problem exists
with LMDE as well. Therefore I assume this is a Grub2 problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have reported this with 10.10 RC
https://bugs.launchpad.net/bugs/654821
--
10.04.1 LTS Grub gives message error: out of disk
https://bugs.launchpad.net/bugs/634639
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Results from this command:
apport-collect 654821
The authorization page:
(https://edge.launchpad.net/+authorize-token?oauth_token=03ZtwVw5s6f7zNxxkjHXallow_permission=WRITE_PRIVATE)
should be opening in your browser. After you have authorized
this program to access Launchpad on your behalf
I get the folowiong message from Launch[ad when trying to carry out the
change.
'grub-pc' is a binary package. This bug has been assigned to its source
package 'grub2' instead.
So I installed grub2 package
** Tags added: apport-collected
** Description changed:
Binary package hint: grub2
apport information
** Attachment added: Dependencies.txt
https://bugs.edge.launchpad.net/bugs/654821/+attachment/1674278/+files/Dependencies.txt
--
10.10 RC Grub gives message error: out of disk
https://bugs.launchpad.net/bugs/654821
You received this bug notification because you are a
Public bug reported:
Binary package hint: grub2
I installed 10.10 RC and have been getting error: out of disk messages
on a Cold Boot. That is one where you have to switch the PC on. It
will boot, however if you push the restart button.
I have reported this for 10.04.01 LTS as well see bug
Thanks Dejan Oljaca I have opened a new bug at
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/634639 in the hopes
that someone would look at it at fix it. I would be plased if you added
your support to that bug as well.
--
grub 2 error: out of disk. failed to boot default entries. press
Using the information in this post
http://ubuntuforums.org/showthread.php?t=1195275 I have been able to get more
information about this bug
.
I reinstalled 10.04.1 LTS and tried this
http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:write
This isn't the
Public bug reported:
Binary package hint: grub2
I installed 10.04.1 LTS and have been getting error: out of disk messages on
a Cold Boot. That is one where you have to switch the PC on. It will boot,
however if you push the restart button.
Using the information in this post
More information about this bug.
If I boot from the 10.04.01 LTS Live CD and restart the system
10.04.01 will boot from the hard drive, but it issues a message error:
out of disk. just before it continues the boot sequence.
If I cold boot directly from the hard drive I get as far as the
error:
I would like to add that I am getting this issue with a freshly burnt
10.4.1
--
grub 2 error: out of disk. failed to boot default entries. press any key to
continue...
https://bugs.launchpad.net/bugs/477430
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Binary package hint: sound-juicer
Sound Juicer should build playlists in m3u format for example:
#EXTM3U
#EXTINF:801,01 - Moanin.flac
01 - Moanin.flac
#EXTINF:711,02 - Nicas Dream.flac
02 - Nicas Dream.flac
#EXTINF:502,03 - Little
It should allow by configuration for
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/41196257/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/41196258/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/41196259/ProcStatus.txt
--
Sound
Can't check in anything but LTS 8.04 sorry
--
Unable to change volumes using sliders
https://bugs.launchpad.net/bugs/194230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I have been asked by email to comment on this bug. I now have Firefox
3.0.11 and it appears to be fixed for me. Thank you
--
[MASTER] right click (with button release) might activate random popup-menu-item
https://bugs.launchpad.net/bugs/187313
You received this bug notification because you are
I have mouse problems with FF 3.0.5 in Hardy. I can not yet report what is
causing them, but I can tell you that my problems are mainly with the middle
button of a 3 button mouse, random events occur, not the action that I expect,
which is open a page in a new tab. However if I use both the
I have managed to get around this problem. It appears to be due to the
presence/non-presence of some directories and files.
I made sure the following were present:
/var/run/dovecot/login
/var/run/dovecot/login
/etc/dovecot/dovecot.conf
I was then able to reinstall dovecot-common
There is a bug
I have managed to get around this problem. It appears to be due to the
presence/non-presence of some directories and files.
I made sure the following were present:
/var/run/dovecot/login
/var/run/dovecot/login
/etc/dovecot/dovecot.conf
I was then able to reinstall dovecot-common
There is a bug
Just had this problem this weekend
--
package dovecot-common 1:1.0.10-1ubuntu5.1 failed to install/upgrade:
subprocess post-installation script returned error exit status 1
https://bugs.launchpad.net/bugs/239752
You received this bug notification because you are a member of Ubuntu
Bugs, which
I don't have 8.10 alpha. But this appears fixed in 8.04 except for the
fact that the MIC level in Audacity will not change the record level.
--
Unable to adjust sound levels when recording in feisty
https://bugs.launchpad.net/bugs/118725
You received this bug notification because you are a
I am sorry but right now I am unable to help you debug this due to other
commitments, and I am changing over to 64-Bit Hardy.
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Yes
[EMAIL PROTECTED]:~$ cat /etc/hosts
127.0.0.1 localhost
10.0.0.10 neon.atom neon
10.0.0.6 carbon.atom carbon
10.0.0.30 zinc.atom zinc
10.0.0.85 astatine.atom astatine
10.0.0.78 platinum.atom platinum
10.0.0.90 thorium.atom thorium.atom
# The following lines are desirable for IPv6 capable
Public bug reported:
I have an M-Audio M2496 card which uses the ICE1712 chip.
I recently upgraded (using software update) to Audacity 1.3.4-beta. I run
Ubuntu Gutsy.
I now find that I am unable to change the volume of recording or playback using
the sliders in the Audacity toolbar. This worked
** Attachment added: asound.conf
http://launchpadlibrarian.net/12150809/asound.conf
--
Unable to change volumes using sliders
https://bugs.launchpad.net/bugs/194230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I forgot to mention that I am not using a multi-boot system.
Also when using 2.6.20-16 I get the same problem - but interminably.
--
fsck Unable to resolve UUID
https://bugs.launchpad.net/bugs/106209
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
I also forgot to mention that I am using RAID 1
--
fsck Unable to resolve UUID
https://bugs.launchpad.net/bugs/106209
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I am having this trouble in Gutsy when I use kernel 2.6.22-14. I get the
message from fsck that it is unable to resolve a uuid, but the uuid exists.
I have reverted to 2.6.20-16, which does boot - although there are some
problems with booting at times with that kernel a swell.
--
fsck Unable
Sorry, but I am not sure that I can help out now. The PC that was used
when this problem arose has been utilised for another project now.
--
Network is unreachable in Feisty
https://bugs.launchpad.net/bugs/95257
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Today it was my USB (I-pod) device would not automount.
Here is information that has been provided before
uname -a
Linux thorium 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686
GNU/Linux
** Attachment added: dmesg.log
http://launchpadlibrarian.net/9654117/dmesg.log
--
lspci -vvnn lspci-vvnn.log
** Attachment added: lspci-vvnn.log
http://launchpadlibrarian.net/9654118/lspci-vvnn.log
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
changed to new because new information added
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Incomplete = New
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
Well here we go again! This morning when I powered up my PC i had the following
problems
1 - USB (I-pod) device would not automount.
so I rebooted with a shutdown -r now
2. had 3 trys at this because of all the problems noted in previous entries
3. Then I had no menus from the gnome toolbar and
Well the problem has not been fixed. Here is the current indication:
Log of fsck -C -R -A -a
Fri Jul 6 08:50:24 2007
fsck 1.40-WIP (14-Nov-2006)
fsck.ext3: Unable to resolve 'UUID=e1298250-91d0-4524-8fea-abeffc04d4ec'
fsck died with exit status 8
Fri Jul 6 08:50:24 2007
As
A few days ago my son ran the following command:
sudo update-initramfs -u
Since then I have had no boot-up problems. This does not mean that the
problem is fixed, because I can go for days without having any problems,
and then get several in a row. So I would like to wait a while before I
claim
And the next attachment here
** Attachment added: lspci -vvnn lspci-vvnn.log
http://launchpadlibrarian.net/8270229/lspci-vvnn.log
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
Public bug reported:
Here is my /etc/hosts:
127.0.0.1 localhost
10.0.0.10 neon.atom neon
10.0.0.6 carbon.atom carbon
10.0.0.30 zinc.atom zinc
10.0.0.85 astatine.atom astatine
10.0.0.78 platinum.atom platinum
10.0.0.90 thorium.atom thorium
# The following lines are desirable for IPv6 capable
SystemAdministrationNetwork
Wired ConnectionHostsAdd
--
[network-admin] appends network name to machine name
https://bugs.launchpad.net/bugs/122948
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
A new problem in this saga
Two days in a row I have had the following messages on bootup.
BusyBox V1.1.3 (Debian 1:1.1.3-3ubuntu3) Built-in Shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
Of course on reboot - I have to
Is https://bugs.launchpad.net/ubuntu/+bug/120285 a duplicate of this
problem?
--
Feisty boot fail can't access tty IDE SATA problem
https://bugs.launchpad.net/bugs/106864
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Hello, I'm Bananabob's Son.
Here are a few more pieces of information.
The raid is set up using partions 3 of both drives.
Swap is on partions 2 of both drives to load balance.
Root is on partion 1 of the first drive. Partition 1 of the second drive is for
a developmental root if the need
Here is the commands outout as requested.
[EMAIL PROTECTED]:~$ blkid
/dev/sda1: LABEL=System UUID=69eb4fab-f38b-43f7-8796-39734a877b89
SEC_TYPE=ext2 TYPE=ext3
/dev/sda2: TYPE=swap UUID=b800200b-197f-40e2-b27e-684b783e1bea
/dev/sdb1: LABEL=Development UUID=e4ee9322-cbbf-4252-ad3e-ba14032571a4
Here is my FSTAB. My question is what does it mean and how do I change
it to get it work with the new kernel? It seems to me that I am using
dev/sdxx ids!
# /etc/fstab: static file system information.
#
# file system mount point type options dump pass
proc/proc
I thought that I had made it clear in my original post that I had used
the envy24 controil tool, and I quote
I have tried to adjust the recording levels by using Envy24 Control
mixer, alsamixer, alsamixergui. gnome alsa mixer. I have also tried to
use the controls in Audacity, but that doesn't
I thought that I had made it clear in my original post that I had used
the envy24 controil tool, and I quote
I have tried to adjust the recording levels by using Envy24 Control
mixer, alsamixer, alsamixergui. gnome alsa mixer. I have also tried to
use the controls in Audacity, but that doesn't
Public bug reported:
At boot I sometimes get the following message
Log of fsck -C -R -A -a
Thu Jun 14 10:17:08 2007
fsck 1.40-WIP (14-Nov-2006)
fsck.ext3: No such file or directory while trying to open /dev/Volume0/lvol0
/dev/Volume0/lvol0:
The superblock could not be read or does not
** Attachment added: This image shows high record levels and the zero mixer
settings
http://launchpadlibrarian.net/7962874/sound.jpg
--
Unable to adjust sound levels when recording in feisty
https://bugs.launchpad.net/bugs/118725
You received this bug notification because you are a member
Public bug reported:
Binary package hint: alsa-base
No matter what program I use to record sound with. I can not adjust my
sound levels. I have tried Audacity, Track_rec and Gnome Sound Recorder.
I have tried to adjust the recording levels by using Envy24 Control
mixer, alsamixer, alsamixergui.
Public bug reported:
Using latest version of Feisty.
I cannot connect to the network.
Result of a ping gives me the message connect: Network is unreachable
Output from ifconfig:
eth0 Link encap:Ethernet HWaddr 00:80:AD:0C:84:7D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
dmesg as requested:
[0.00] Linux version 2.6.20-12-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 20:55:46 UTC 2007 (Ubuntu
2.6.20-12.20-generic)
[0.00] BIOS-provided physical RAM map:
[0.00] sanitize start
[0.00]
Thank you for the quick fix.
There is another bug report at
https://launchpad.net/ubuntu/+source/cupsys/+bug/69265
which describes the same fault.
Can I delete the usb file that I copied to my home directory, or shjould
I hold onto it - just in case?
--
Brother HL-1430 USB printer will only
I have carried out the instructions you gave above, and I can report
thjat everything now works using the test printer.
What is next?
Do I need to delete the changes made to cupsd.conf and delete the test
printer?
--
Brother HL-1430 USB printer will only print once
I made the changes and it does work.
--
Brother HL-1430 USB printer will only print once
https://launchpad.net/bugs/57050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
quoteEdit /etc/cups/cupsd.conf so that it has a line FileDevice Yes,
then restart CUPS with sudo /etc/init.d/cupsys restart and create a
queue for your printer using the URI file:/dev/usblp0 and the same PPD
file as for your current print queue. This surrounds the USB backend.
Tell whether you can
I believe I may have found a solution to this problem.
I Tried to add Brothers own lpr and cups driver as per
http://solutions.brother.com/linux/sol/printer/linux/cups_drivers.html#de
Needed to issue sudo mkdir /var/spool/lpd as the first dpkg aborted with
mkdir: cannot create directory
This could be a duplicate of https://launchpad.net/bugs/57050
--
Cups prints only first job on USB printer
https://launchpad.net/bugs/69265
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I am having this problem with a Brother HL-1430 connected via USB, and
using CUPS on Edgy.
Is there a fix for this and if so where is it?
--
Cups prints only first job on USB printer
https://launchpad.net/bugs/69265
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I just want to add a me too
I have HL-1430 and Edgy.
The printer will print once and then I have to unplug the USB cable and
replug it to get the printer to print remaining jobs.
I note that some people report that this is fixed, but no one tells us
how to fix it.
--
Brother HL-1430 USB
I am running Edgy and the problem still occurs
** Changed in: cupsys (Ubuntu)
Status: Fix Released = Needs Info
--
Brother HL-1430 USB printer will only print once
https://launchpad.net/bugs/57050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This problem still occurs in Edgy
** Changed in: cupsys (Ubuntu)
Status: Fix Released = Needs Info
--
Cups prints only first job on USB printer
https://launchpad.net/bugs/69265
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Installed from scratch onto a newly built PC.
--
Brother HL-1430 USB printer will only print once
https://launchpad.net/bugs/57050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I too get a whole raft of messages. I have attached the email
** Attachment added: Scrollkeeper email
http://librarian.launchpad.net/5787043/mail.txt
--
monthly scrollkeeper cron job is very noisy
https://launchpad.net/bugs/73609
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I had this problem on my PC but I have fixed it.
When I originally installed Ubuntu Edgy everything worked fine. I booted
up and the CPU Frequency Scaled as expected.
Then I started to play with the setting of the Login Window
(SystemAdministrationLogin Window) There I unchecked Show Actions
74 matches
Mail list logo