Public bug reported:
In some cases the kernel does detect a newly connected USB device, but
this device is never handled by systemd. The device handling shows up in
dmesg, but no device /dev/sd.. entries are created to access this newly
connected storage device.
ProblemType: Bug
DistroRelease:
Yes. Same message for Ubuntu or debian:
The UEFI loader does not find the file given. With VirtualBox I could
read the message. With KVM it was impossible to read it. But it seems to
be the very same message: failed to load Boot0001 "UEFI : not found"
--
You received this bug notification
Public bug reported:
Upgrading a root on zfs system will break this system. This is for:
- 22.04 -> 22.10
- 22.10 -> 23.04
- 23.04 -> 23.10
- 23.10 -> 24.04
- 22.04 -> 24.04
Workaround: set all grub packages on "hold" before upgrading.
If you do not, you'll lose booting possibilities, wrecking
I can't reproduce this issue on impish or jammy. It was fixed by a
change in handling sockets in systemd.
On Mon, May 9, 2022 at 6:25 PM Paride Legovini
<1957...@bugs.launchpad.net> wrote:
>
> Hello Thomas. You filed this bug against:
>
> DistroRelease: Ubuntu 21.10
> Package: openssh-server
Not sure if this was a later version of autofs, network or systemd
which repaired this issue. At least with the versions installed it is
now done the right way: unmount network mounted filesystems (any of
them: nfs, smb, sshfs, ...), then turn down networking. Not as before:
turn down networking,
Wont pair any audio device. All give: br-connection-profile-unavailable
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1972049
Title:
bluetooth does not connect to headset anymore since updates
Public bug reported:
bluetooth does not connect to headset anymore since updates after 5.5.2022
Error shown: br-connection-profile-unavailable
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: blueman 2.2.4-1
ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30
Uname: Linux
xubuntu and kubuntu, as lubuntu do use pipewire for audio.
kali switched last night to use it.
openSUSE did so too.
i did not test on a plain vanilla gnome based ubuntu until now. Will do
it later this day (if time permits).
--
You received this bug notification because you are a member of
These modules seem to collide with pipewire-media-session, but are
required by bluez-stack to connect bluetooth headsets (or other devices)
to pulseaudio.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Meanwhile even the distros working until yesterday stopped working today
(5. May 2022 around 22:00).
The bug seems related to pipewire and switching to this new infrastructure.
It breaks nearly everything related with sound and bluetooth.
Modules involved:
- pipewire-pulse
- wireplumber
--
You
It is an old problem: if the server allows for nfs3 and nfs4, then the client
shall probe nfs4 first. If it fails it has to fall back to nfs3. In some cases,
the probe fails to detect nfs4 not working in some environments and tries using
nfs4 even if it is impossible.
This is not really
An upstream wontfix.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1969534
Title:
mounting nfs shares fails
To manage notifications about this bug go to:
Solved by a new version of upgrade tools.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1968028
Title:
unattended-upgrades if enabled wont disable interactivemode
To manage notifications about
This isn't solvable by conky. it is an autofs/mount problem.
** Changed in: conky (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1969535
Title:
conky fails
This isn't solvable by keepass. It is an autofs/mount problem
** Changed in: keepass2 (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1969536
Title:
keepass2
Solved by a later version of systemd and sshd.
To have it work as intended sshd has to be compiled with different options set.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1957104
Title:
updating
Solved by a later version of autofs. It is now stopped before network is
turned down and after all buffers are flushed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1968127
Title:
autofs stopped
Solved upstream. Was qmapshack looping initializing routing.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1953378
Title:
QMapShack loops forever at startup
To manage notifications about this bug
Solved with a later version of Qmapshack
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1953382
Title:
QMapShack retries a server with errors
To manage notifications about this bug go to:
Solved by upgrading routing software.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1955726
Title:
QmapShack crashes routing
To manage notifications about this bug go to:
Packages installed as dependencies of cmake are not installed any more
because these are only needed for some software projects. These software
has to install these parts for cmake now.
The cmake developers will not fix this, because those other package
developers have to do their work installing
Solved with a later version of required packages
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1915707
Title:
keyboard settings not applied
To manage notifications about this bug go to:
Solved upstream with later versions -- depended on graphics driver too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1922104
Title:
Massive redraw-errors with latest version of xfce4
To manage
Solved upstream by a later version.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1923044
Title:
claws-mail does not add cite
To manage notifications about this bug go to:
Solved upstream by a later version
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1923046
Title:
claws -mail connected to an exchange server will crash irregular
To manage notifications about this
Solved upstream by updating required packages. The crash was within
routing.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1923306
Title:
qmapshack wont start any more singe updates from 10.4.2021
Solved upstream by later versions on thunar and systemd
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1943585
Title:
thunar displays "Ein Vorgang steht noch aus" for various USB-devices
instaed
Solved upstream with later versions of cups.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1852474
Title:
cups not printing if authentication required by server
To manage notifications about this
Solved upstream with a later version
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1904801
Title:
kleopatra will not export private certificates instaed exporting the
public cert only
To manage
solved upstream with later versions
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1905059
Title:
kleopatra does not import certificates from file if all certificates
have different phasphrases
Solved with a later version.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1708062
Title:
libdvd-pkg wont compile libdvdcss because database locked
To manage notifications about this bug go to:
Solved upstream with later versions of cups
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1856187
Title:
Cups wont print to smb-shared printer requiring user authentication
via kerberos
To
Solved with a later version. Behaves now as described.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1795911
Title:
find_java_runtime finds only latest java, even if others are installed
To manage
Solved in qmapshack 1.16
qlandkarte is deprecated.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1631109
Title:
Trying to create a route from a track only gives back "Server error"
To manage
Seems solved meanwhile.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1335498
Title:
xfce4 starts applications defined to start up at desktop start
multiple times
To manage notifications about
Public bug reported:
Bluetooth devices do not connect. Or better: they connect, disconnect,
connect, then finally disconnect.
It is the same using graphical tools or cli.
It is the same for
- ubuntu, kubuntu, xubuntu, versions 20.04 LTS, 21.10, 22.04 LTS, 22.10 (beta)
- debian 11.3
- fedora 35
Public bug reported:
linux-generic kernels are missing nbd modules.
Since these modules are not build and not found in linux-generic-extra
or other packages it is not possible to
- use nbd-devices
- it is not possible to mount *.qcow2 qemu virtual harddrives into your host
system
You can
Public bug reported:
keepass2 (or mono) tries to access autofs mounted shares. This fails,
because nfs mounting these shares won't succeed, stalling forever.
ProblemType: Bug
DistroRelease: Ubuntu 21.10
Package: keepass2 2.47+dfsg-2 [modified: usr/lib/keepass2/KeePass.exe
Public bug reported:
conky fails accessing autofs mounted nfs-shares, because nfs fails
mounting.
ProblemType: Bug
DistroRelease: Ubuntu 21.10
Package: conky 1.11.6-2
ProcVersionSignature: Ubuntu 5.13.0-41.46-generic 5.13.19
Uname: Linux 5.13.0-41-generic x86_64
ApportVersion:
Same error is found for 22.04, 21.10, 21.04 the problem exists with
debian 11.3, kali latest rolling, it works for 21.10 before upgrades
applied after 18.4.2022 23:00.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Mounting nfs shares from nfs3 or nfs4 servers fails.
Mount command runs without ever returning.
Share is not mounted even after hours of waiting.
ProblemType: Bug
DistroRelease: Ubuntu 21.10
Package: autofs 5.1.7-1ubuntu1
ProcVersionSignature: Ubuntu 5.13.0-41.46-generic
Public bug reported:
Paired Bluetooth devices are connected, then disconnected, connected
again, then finally disconected.
This is with
- Ubuntu, xUbuntu 21.10
- Ubuntu, xUbuntu 22.04(beta)
It works with
- kali (latest)
- debian 11.3 (latest)
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Public bug reported:
autofs is stopped after network connections turned down. It has to be
stopped before network connections are stopped.
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: autofs 5.1.8-1ubuntu1
ProcVersionSignature: Ubuntu 5.15.0-25.25-generic 5.15.30
Uname: Linux
This can be seen with
- 16.04
- 18.04
- 20.04
- 21.10
- 22.04
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1968028
Title:
unattended-upgrades if enabled wont disable interactivemode
To manage
Public bug reported:
unattended-upgrades if enabled wont disable interactive mode. In tune an
unattended upgrade stops waiting for input never to expect, because the dialog
displayed is never seen by anyone.
Updates will not be installed at all in some cases.
ProblemType: Bug
DistroRelease:
Thomas Schweikle schrieb am Sonntag 20 März 2022 14:22:09 (+01:00):
> Public bug reported:
>
> virt-manager looses connection to virtualization hosts on desktop systems at
> low to moderate loads. For dedicated virtualization hosts at moderate hosts.
> If the load persists
Public bug reported:
virt-manager looses connection to virtualization hosts on desktop systems at
low to moderate loads. For dedicated virtualization hosts at moderate hosts. If
the load persists it is difficult to reconnect.
If the load drops it is in all cases possible to reconnect to the
Public bug reported:
qemu-system-x86 looses network connectivity even at low loads. Using qemu
running VM with
- FreeBSD 11, 12, 13, 14
- Ubuntu 20.04, 20.10, 21.04, 21.10, 22.04(beta)
- Fedora 34, 35, rawhide
- debian stable, testing, unstable, debian-kfreebsd, debian-hurd
- gentoo
- haiku
-
Public bug reported:
Any nfs4 mounts fail from nfs-servers with lower or same version.
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: autofs 5.1.8-1ubuntu1
ProcVersionSignature: Ubuntu 5.15.0-23.23-generic 5.15.27
Uname: Linux 5.15.0-23-generic x86_64
NonfreeKernelModules: zfs zunicode
It is fixed with the latest samba-version (4.15.5~dfsg-0ubuntu1)
available within Ubuntu-Repositories.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1852994
Title:
samba creates temporary files in
sshd is started by systemd. No special configurations besides defaults
by Ubuntu/xUbuntu. Only change in /etc/ssh/sshd_config: "PermitRootLogin
prohibit-password" -> "PermitRootLogin yes"
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
Hotplugging devices into USB 3.0/1/2 Ports does not create devices in
/dev. The plugged device is not accessible afterwards. This is for all
of them: USB-Disks (HD, CDROM, Tapes), USB to serial converters, Audio,
Video, Cameras.
ProblemType: Bug
DistroRelease: Ubuntu 21.10
Yes, going back to this version solves this bug. But it needs to go
back to older versions of a variety of dependencies too.
On Wed, Feb 23, 2022 at 3:40 AM Daniel van Vugt
<1961...@bugs.launchpad.net> wrote:
>
> In case the cause is
> https://launchpad.net/ubuntu/+source/pipewire/0.3.47-1ubuntu1
Start-Date: 2022-02-21 01:16:18
Commandline: apt -y upgrade
Requested-By: tps (1000)
Upgrade: firefox-locale-en:amd64 (97.0+build2-0ubuntu1,
97.0.1+build1-0ubuntu1), dmeventd:amd64 (2:1.02.175-2.1ubuntu3,
2:1.02.175-2.1ubuntu4), udev:amd64 (249.9-0ubuntu2, 249.10-0ubuntu1),
libctf-nobfd0:amd64
Public bug reported:
bluetooth connects with headset, then times out, deconnects.
Forcing it to connect again it does, then times out and deconnects again.
Seen this with:
- Cyber jack
- Phonak Hearing Aids
- Sennheiser Headset
Since it worked until Feb. 21st, 2022 latest fixes applied at
Public bug reported:
openssh-server tries to restart itself, but openssh-server reports port
22 in use. This is true: systemd has taken port 22 to start sshd if one
connects to port 22.
two solutions:
1. dont start sshd after installing.
configure it without starting it afterwards.
2. stop
Public bug reported:
usb devices connected via an usb 3.x-hub are not detected.
[53443.604120] usb 4-4.2: new SuperSpeed USB device number 6 using xhci_hcd
[53443.707572] usb 4-4.2: New USB device found, idVendor=2109, idProduct=0813,
bcdDevice=90.11
[53443.707583] usb 4-4.2: New USB device
Public bug reported:
libaacs0 :amd64 is installed, but not accessed or not found or not the
version installed players need.
vlc:
VLC media player 4.0.0-dev Otto Chriek (revision
4.0.0~rc1~~git20211228+r90436+274~ubuntu21.10.1)
[7fff718078c8] main generic error: cannot load plug-in
Working combination for Ubuntu 21.10 with latest updates applied:
- bluez: 5.62
- blueman: 2.2.3 or blueberry 1.4.6
all other packages as available in ubuntu repositories.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
The device is shown, but right clicking, then selecting "Connect" will
try to connect to device. The connection will time out.
Since this worked (and works) with (x)Ubuntu 20.04.x (18.04.x) I assume
it a bug with (x)Ubuntu 21.10. It even worked, but not reliable, with
Tried to replace blueman by blueberry. Did not help. Same errors as
before. Upgrading bluez to latest stable version made it work with
blueberry. Had to upgrade blueman too to the latest stable version to
have it work again.
--
You received this bug notification because you are a member of
Public bug reported:
QmapShack crashes routing routes in certain cases. This bug is known and
solved in version 1.16.1 as available on the projects website:
https://github.com/Maproom/qmapshack/releases
The crash occurs if you select "Bicycle" and then "calculate route".
ProblemType: Bug
Public bug reported:
The graphics system fails to detect monitors connected to ports on
docking stations. The ports themselves are detected an reported, but
stay in state "disconnected" regardless there are monitors connected or
not.
Internally the laptop has two Display-Ports, two HDMI-Ports
Public bug reported:
Some parts of the xfce4-panel are not movable because they do not have a
"move" entry within their context menu. The context menu only shows menu
items from the application the icon represents.
Some of them:
- Module for state messages
- Module for messages
These show icons
Version 2.4.2 available at https://gitlab.com/tabos/rogerrouter does run as
expected.
Could you upgrade to this version?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1955494
Title:
roger-router
Public bug reported:
Roger-Router starts, showing the Assistant-start-button. The only thing you can
do is press this button to start the assistant. Starting the assistant works
exactly once. Right after finishing the first panel asking for a profile name,
the process of detecting routers
Public bug reported:
installing exfatprogs removes exfat-utils and various tools depending on
exfat-utils.
installing exfat-utils removes tools depending on exfatprogs.
Since exfatprogs is needed to work with exfat from gparted and parted and
exfat-utils are needed to work with various other
Public bug reported:
QMapShack retries a server giving back errors
ERROR 1: server certificate verification failed. CAfile: none CRLfile: none
ERROR 1: /home/sct-muc/.QMapShack/DEMs/World_Online_SRTM900.wcs, band 1:
IReadBlock failed at X offset 22, Y offset 9: server certificate verification
Public bug reported:
QMapShack loops forever at startup. This is a known bug solved with the latest
version from github.
Could you please be kind and upgrade to this version: 1.16.1
ProblemType: Bug
DistroRelease: Ubuntu 21.10
Package: qmapshack 1.15.2-1build1
ProcVersionSignature: Ubuntu
Public bug reported:
CMake Error at CMakeLists.txt:157 (find_package):
By not providing "FindQuaZip-Qt5.cmake" in CMAKE_MODULE_PATH this project
has asked CMake to find a package configuration file provided by
"QuaZip-Qt5", but CMake did not find one.
Could not find a package
Public bug reported:
latest ubuntu-kernels stop responding to usb storage devices all using
xhci_hcd:
- Prolific Technology, Inc. PL2773 SATAII bridge controller
maybe others too. Symptom: devices are shown in thunar, nautilus. They show up
in /dev as /dev/sdXN, but clicking them in thunar or
Public bug reported:
After plugging in an usb-device, this device shows up in /dev as sdb and sdb1.
Tunar lists it as disk with partition "@" greyed out, ready to mount. Clicking
on this greyed out disk thunar tells that a action is pending and does nothing.
even after more than a quarter of
Public bug reported:
virt-manager throws error "cannot load AppArmor profile
'libvirt-3edcea34-7a68-49ed-b6fb-3621d6fe9fa6'".
The profile is there:
# ll
insgesamt 59
drwxr-xr-x 2 root root 7 Aug 25 12:58 ./
drwxr-xr-x 9 root root 27 Aug 25 09:35 ../
-rw-r--r-- 1 root root 293 Aug 25 12:57
Public bug reported:
qmapshack wont start any more with error messages since updates applied
until 10th, April 2021.
$ qmapshack
2021-04-10 14:16:16.986 [warning] Empty filename passed to function
ERROR 11: CURL error: Failed to connect to published-files.eea.europa.eu port
80: Die Wartezeit
Public bug reported:
If I answer an incoming mail, I want to have the mail cited. claws mail
is set up to cite the whole mail automatically. This does not work.
Setting the required configuration to
Citation Sign: >
On %d %f wrote:
%q
%X
will lead to an empty mail. In all cases. You will
Public bug reported:
claws-mail connected to an exchange server will crash irregular while
connecting the server. It might work for, say 100 times. The 101 connect
will crash it.
ProblemType: Bug
DistroRelease: Ubuntu 21.04
Package: claws-mail 3.17.8-1build1
ProcVersionSignature: Ubuntu
Public bug reported:
Updated to latest xfce4-suite. Since then massive redraw errors are seen:
- after closing windows, the window stays on screen
- after closing dialogs, these stay on screen
- moving windows around the window gets painted multiple times while moved.
This "tail" stays on
Same problem again: guests can resolve internet addresses, but are
unable to access them:
# host google.com
google.com has address 172.217.20.238
google.com has IPv6 address 2a00:1450:4016:801::200e
google.com mail is handled by 30 alt2.aspmx.l.google.com.
google.com mail is handled by 10
Public bug reported:
libvirt starts a new instance of dnsmasq for every interface it creates.
This instance is created even if one selects to not have a dhcp service running
because the hosts connected to this interface use it for name resolution.
This interferes with setups where there are
Public bug reported:
dnsmasq ist set up to resolve DNS names with a local, static file given at
/etc/dnsmasq-resolv.conf:
# cat /etc/dnsmasq-resolv.conf
nameserver 10.161.18.34
nameserver 10.177.18.34
nameserver 10.129.90.10
nameserver 10.160.90.10
nameserver 10.161.90.10
search
All servers
Public bug reported:
systemd-resolved will, unter certain circumstances create local only DNS
resolution:
# host google.com
;; connection timed out; no servers could be reached
looking at what is going on behind:
# cat /etc/resolv.conf (linked to /run/resolvconf/resolv.conf)
nameserver
Public bug reported:
Global keyboard settings are set in /etc/defaults/keyboard:
XKBMODEL="pc105"
XKBLAYOUT="de"
XKBVARIANT=""
XKBOPTIONS="lv3:ralt_switch,compose:menu,terminate:ctrl_alt_bksp"
BACKSPACE="guess"
These settings are not active any more after upgrading from focal to groovy.
Same
Public bug reported:
kleopatra does not import all GnuPG-Keys from file if all private keys
have different passphrases.
The first key will be imported, after asking for the passphrase. All
further keys will fail, because kleopatra tries to decrypt them using
the first given passphrase and will
Public bug reported:
Install kleopatra,
Generate public/private key pair
Export the private key to file
The file will only hold the public key.
To export the private key side by side with the public one you'll have
to open a commandline and use gpg.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Public bug reported:
while starting X11 xrandr executes commands:
xrandr --newmode "3840x2160_30.00" 338.75 3840 4080 4488 5136 2160 2163 2168
2200 -hsync +vsync
xrandr --addmode DP-1 "3840x2160_30.00"
xrandr --output DP-1 --mode "3840x2160_30.00"
while newmode, addmode work, the third
Public bug reported:
kleopatras certificate lists are all monochrome. Settings for
certificate categories are greyed out. Maybe due to a missing library?
Because of a missing dependency?
ProblemType: Bug
DistroRelease: Ubuntu 20.10
Package: kleopatra 4:20.08.1-0ubuntu1
ProcVersionSignature:
Public bug reported:
Kernel turns off USB-devices.
A mouse connected to an usb-port works until some time. Then this device is
turned off and never turned on again. I tried to turn off power saving for such
devices, but without success.
This started with kernels 5.4.0-49-generic and later. I
Solved by upgrading to pdfsam 4.1.4
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1877000
Title:
openjfx is missing native libraries for webkit and media
To manage notifications about this bug go
It is not fixed as of 13th, Oct. 2020. Same as before. pdfsam basic
crashes while trying to load libraries from openjfx. Regardless it is
installed or not. There are missing libraries. And it turns out missin
are those from openjfx.
--
You received this bug notification because you are a member
Works with Java from Oracle, does not work with OpenJava.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887142
Title:
libhibernate-validator-java should be kept at 4.3.4-1
To manage notifications
Public bug reported:
ubuntu-bug shall try to find a package a command belongs to if the given
name does not match an installed package.
Now:
# ubuntu-bug ubuntu-bug
dpkg-query: Kein Paket gefunden, das auf ubuntu-bug passt
ubuntu-bug shall do in such cases:
- look for the package:
# dpkg -S
Public bug reported:
grub does not initialize display. It loads drivers, but wont display any
menue. You can only blindly try to find the entry to boot if something
goes wrong with the default one. This is on a variety of machines
connected to 4k displays.
ProblemType: Bug
DistroRelease: Ubuntu
Public bug reported:
linux-image-unsigned-5.4.0-46-generic wont initialize console as
expected. No monitor is used or found. No graphics, no text console.
Only a blank black screen.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: linux-image-unsigned-5.4.0-46-generic 5.4.0-46.50
Public bug reported:
This is if some directories are mounted using autofs. Thunar will hang
when autofs had umounted these directories. Nautilus does not show this
behaviour, as does Nemo or Dolphin.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: thunar 1.8.14-0ubuntu1
Public bug reported:
cups-pdf wont print because it cant open file to print to
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: printer-driver-cups-pdf 3.0.1-6
ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44
Uname: Linux 5.4.0-42-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.6
Public bug reported:
pdfsam crash while composing pdfs together
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: pdfsam 4.0.4-1
ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44
Uname: Linux 5.4.0-42-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.6
Architecture: amd64
INFO [00:29:50]: Starting PDFsam
INFO [00:29:52]: Configuring Sejda 3.2.84
INFO [00:29:53]: Gestarted in 2 seconds
INFO [00:30:01]: Tour_II+III_hütten.pdf loaded
INFO [00:30:06]: Tour II+III_sat.pdf loaded
INFO [00:30:09]: Tour II+III_topo.pdf loaded
INFO [00:30:11]: Trackinfo.pdf
Java exceptions
** Attachment added: "PDFsam.log"
https://bugs.launchpad.net/ubuntu/+source/pdfsam/+bug/1888503/+attachment/5394889/+files/PDFsam.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
merging pdfs pdfsam exausts: class not found exception – java classes
needed by pdfsam are not installed
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: pdfsam 4.0.4-1
ProcVersionSignature: Ubuntu 5.4.0-40.44-generic 5.4.44
Uname: Linux 5.4.0-40-generic x86_64
Public bug reported:
snap seems to ignore global proxy settings. In tune it fails to connect
to download servers.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: snap (not installed)
ProcVersionSignature: Ubuntu 5.4.0-40.44-generic 5.4.44
Uname: Linux 5.4.0-40-generic x86_64
ApportVersion:
1 - 100 of 1479 matches
Mail list logo
