Public bug reported:
I chose to NOT reformat my partition and the grub installation failed
ProblemType: Bug
DistroRelease: Ubuntu 20.10
Package: ubiquity 20.10.13
ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14
Uname: Linux 5.8.0-25-generic x86_64
NonfreeKernelModules: zfs zunicode zavl
I am unable to increase screen brightness at all, my brightness is
extremely low. there is no place to change this in the settings
manager.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/823751
I wrote the iso to a CD, and it booted just fine. So I'm closing this.
** Changed in: ubiquity (Ubuntu)
Status: New = Invalid
--
installation program crashed
https://bugs.launchpad.net/bugs/632513
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Binary package hint: ubiquity
Trying to install maverick beta, 64bit version. I get a dialog (in
norwegian, since I selected it) that says the installer program crashed,
and that I should file a new bug report with the content of
/var/log/syslog and /var/log/partman. There
** Attachment added: syslog
https://bugs.launchpad.net/bugs/632513/+attachment/1554088/+files/syslog
--
installation program crashed
https://bugs.launchpad.net/bugs/632513
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: partman
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/632513/+attachment/1554099/+files/partman
--
installation program crashed
https://bugs.launchpad.net/bugs/632513
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hm, I found this in the release notes: USB stick installs will fail unless
they are created without persistence enabled. This is fixed in updates, but not
on the CD. (627672)
So I'll make a new usb, and retry, and close this bug if it works.
--
installation program crashed
This bug applies to me too, both on Maveric alpha (2? the one released
before september 2) 64bit and Lucid 64bit. Possibly Lucid 32bit, but I
don't remember. This is on a Toshiba Satellite A300-1OL.
** Attachment added: lspci output
** Changed in: linux (Ubuntu)
Status: Expired = New
--
radeon.new_pll=0 required in kernel to prevent flicker
https://bugs.launchpad.net/bugs/549898
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Ok, it's fixed
Thanks
--
gwibber-service claims about a friendfeed account I discarded and doesn't
appear in the accounts window
https://bugs.launchpad.net/bugs/563611
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
?
Thanks
Cato
--
gwibber-service claims about a friendfeed account I discarded and doesn't
appear in the accounts window
https://bugs.launchpad.net/bugs/563611
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Ok,
after an update the symptom is gone. I suppose it had been indicated and
treated elsewhere and I just missed the thing.
Sorry for the bother
** Changed in: linux (Ubuntu)
Status: New = Invalid
--
scrambled screen at wake up from suspension
https://bugs.launchpad.net/bugs/561623
You
Public bug reported:
Binary package hint: gwibber
Hello
I created a Friendfeed account and then discarded it. So it doesn't
appear any longer in the accounts window.
But a popup window regularly pops up claiming an error trying to access
the friendfeed service.
I have to open a terminal and
** Attachment added: Screenshot.png
http://launchpadlibrarian.net/44235644/Screenshot.png
--
gwibber-service claims about a friendfeed account I discarded and doesn't
appear in the accounts window
https://bugs.launchpad.net/bugs/563611
You received this bug notification because you are a
** Attachment added: showing no friendfeed account is there
http://launchpadlibrarian.net/44235704/accounts.png
--
gwibber-service claims about a friendfeed account I discarded and doesn't
appear in the accounts window
https://bugs.launchpad.net/bugs/563611
You received this bug
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: cato 1186 F pulseaudio
/dev/snd/pcmC0D0p: cato 1186 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xfebfc000 irq 21'
Mixer name : 'Realtek
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/43935151/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/43935153/AplayDevices.txt
** Attachment added: ArecordDevices.txt
http://launchpadlibrarian.net/43935154/ArecordDevices.txt
I forgot: in order to reproduce this bug, the steps are simple:
1) boot the machine, do some work with it
2) wait for the machine to suspend (or suspend it from the menu)
3) go for a walk
4) press the space bar (or do anything else) to wake up the machine
--
scrambled screen at wake up from
2010/3/1 Alesh aleshs...@gmail.com
I was never quite clear on what the cause of this was, but I haven't
experienced problems since Ubuntu 8.10. Ubuntu 9.04, and currently 9.10
work just fine. I think it should be safe to close this bug.
Yes, it's safe to close it. Besides, the reason why the
Any workaround ?
Can I place the templates files myself somewhere so it can see them ?
Thanks
--
[Karmic] Scribes doesn't import templates
https://bugs.launchpad.net/bugs/424360
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
well, it's july 2009, I'm on 9.04 and the bug is still here.
Should I report anything else ?
Thanks
--
Xephyr don't handle the alt car key in ca_FR keymap
https://bugs.launchpad.net/bugs/78718
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
It was working until today, december 3rd 2008.
I have GDM set to open a KDE session and also set to aoutomatically log
in as my user.
Then I logged in with a GNOME session for just some small things and I
accepted an update from the update manager.
And now I run in this nasty bug, I have the
information is needed ? Are you asking to me
? I don't need any further information ? Anyone else needs further
information ?
Also I don't understand clearly who you are: are you a developer and are you
asking for more info ? Or are you a user and trying to help with this bug ?
Thanks
Bye
Cato
2008
I'm experiencing similar simptoms.
I filed a bug report here
(https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/296513)
I attached, there, a lot of stuff, uname, asound/cards, var/log/messages
and I don't remember what else.
I don't know wether it's a duplicate because I'm not getting
Sorry, I forgot I have a HAD Intel as a sound card, not the ICH7 as in
the subject.
Thanks
--
sound not working (Intel ICH7; Ubuntu 8.10; ALSA)
https://bugs.launchpad.net/bugs/291376
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Erik,
thank you SO MUCH ! I've been struggling fr days with this !
I can't believe that was so stupid !
There are LOTS of duplicate bugs, why no one says something ?
My bug was certainly a duplicate of this one and I'm going to signal
that.
Thanks again
Bye
Catonano
--
no sound HDA-intel
the bug reports could
have warned us.
There are plenty of bug reports of no sound after upgradind to Intrepid
Ibex.
Cato
--
sound not working (Intel ICH7; Ubuntu 8.10; ALSA)
https://bugs.launchpad.net/bugs/291376
You received this bug notification because you are a member of Ubuntu
Bugs, which
*** This bug is a duplicate of bug 288861 ***
https://bugs.launchpad.net/bugs/288861
** This bug has been marked a duplicate of bug 288861
no sound HDA-intel AD1984
--
no sound after upgrade to Intrepid with a failure message from pulseaudio
https://bugs.launchpad.net/bugs/296513
You
It's confirmed. The simptom is there and I could remove it thanks to the
Erik's indication.
** Changed in: pulseaudio (Ubuntu)
Status: New = Confirmed
--
no sound HDA-intel AD1984
https://bugs.launchpad.net/bugs/288861
You received this bug notification because you are a member of Ubuntu
Was it a fresh install or an upgrade via the update manager ?
Anyhow, I had the same problem and it was that upgrading had set the PCM
volume to 0
ALSO, the alsamixer had changed in the upgrade, so the simple
alsamixer command did NOT show the PCM volume.
The new alsamixer had to be run like
I'd like to suggest something.
Try to run this command in the terminal:
alsamixer -Dhw
Pay attention to the -Dhw part.
In the screen that shows up, DOUBLE check if the PCM volume is set to 0.
It seems that on some Intrepid installations, that is inexplicably so.
Pump it up and see if you
I'm afraid it could be the PCM volume set to 0 in the alsamixer.
It seems it gets set to 0 by the upgrade from Hardy to Intrepid.
Would you mind to test ?
Bye
Catonano
--
no sound after upgrade to 8.10
https://bugs.launchpad.net/bugs/291770
You received this bug notification because you are a
)
Then just copy the URL to the material your script published on that
site here.
I'm not an official triager but that's what you're going to be asked
anyhow.
Hope this helps
Bye
Cato
** Changed in: linux (Ubuntu)
Status: New = Incomplete
--
no sound for macbook pro Santa Rosa intel 82810H
Public bug reported:
Binary package hint: pulseaudio
I upgraded to Intrepid from Hardy using the Updates manager.
Now there's no sound and I saw a message from Pulseaudio in /var/log/messages.
It's attached (the sentence funzione non permessa in it is in Italian, that
means not allowed
** Attachment added: output from tail /var/log/messages
http://launchpadlibrarian.net/19549261/messages
--
no sound after upgrade to Intrepid with a failure message from pulseaudio
https://bugs.launchpad.net/bugs/296513
You received this bug notification because you are a member of Ubuntu
** Attachment added: dmesg.log
http://launchpadlibrarian.net/19549293/dmesg.log
--
no sound after upgrade to Intrepid with a failure message from pulseaudio
https://bugs.launchpad.net/bugs/296513
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: lspci-vvnn.log
http://launchpadlibrarian.net/19549306/lspci-vvnn.log
--
no sound after upgrade to Intrepid with a failure message from pulseaudio
https://bugs.launchpad.net/bugs/296513
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: uname
http://launchpadlibrarian.net/19549340/uname
--
no sound after upgrade to Intrepid with a failure message from pulseaudio
https://bugs.launchpad.net/bugs/296513
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Attachment added: output from cat /proc/asound/cards
http://launchpadlibrarian.net/19549445/cards
--
no sound after upgrade to Intrepid with a failure message from pulseaudio
https://bugs.launchpad.net/bugs/296513
You received this bug notification because you are a member of Ubuntu
Bugs,
I don't know if I want it changed or not.
The prefix tab heading says maschera that is the Italian for mask.
So it should say prefix at least, so people expecting the dear old
netmask could google it and find out
--
prefix vs. netmask usage in connection-editor causes confusion for users
Done.
I attached a screenshot of the window and proposed a better translation
even there.
Hope this helps
Bye
--
Italian prefix vs. netmask translation inconsistencies in connection-editor
causes confusion for users
https://bugs.launchpad.net/bugs/293749
You received this bug notification
I'm not sure what you mean with text form.
I already wrote it, it should be prefisso instead of Maschera in the
tab heading.
Isn't this text form ?
--
Italian prefix vs. netmask translation inconsistencies in connection-editor
causes confusion for users
https://bugs.launchpad.net/bugs/293749
Sorry, here's the picture, I couldn't manage to attach 2 file in one
shot
** Attachment added: network manager (wlan0).png
http://launchpadlibrarian.net/19349673/network%20manager%20%28wlan0%29.png
--
I can't set the netmask on Network Manager
https://bugs.launchpad.net/bugs/293749
You
I upgraded to Intrepid today with the update manager and my wireless
network settings were inherited from the previous Hardy installation;
Now, from the output of ifconfig wlan0 I see the netmask is
255.255.255.0 (see the attached text file)
Still, in the Network Manager it shows it to be 24 !!
32
2008/10/5 ktp420 [EMAIL PROTECTED]
For all the people whose sound is not working, are you on 64-bit or
32-bit?
--
Sound no longer working after kernel upgrade to 2.6.27-4
https://bugs.launchpad.net/bugs/274124
You received this bug notification because you are a direct subscriber
of a
Well, it didn't work for me.
I had opened a bug report, this one:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/275166
It was tagged as a duplicate of this one, but I'm not sure it is.
In my case, the sound IS working. It only works through the speakers,
NOT through the USB
Sorry, I didn't test the libasound package indicated by Luke, so the
removing of the .pulse* files from the home dir is not supposed to
produce effects.
Sorry again.
Still, is the libasound package supposed to heal my headset issue ?
Thanks
Catonano
--
Sound no longer working after kernel
Well, I tried to install the libasound plugins for my architecture and
the resukt is that libasound2 is NOT installed on the machine and the
plugins package depends on that so it can not be installed.
But I swear the headphone were working until september 25
Thanks
Bye
Catonano
--
Sound no
Public bug reported:
I'm not sure the affected package is PulseAudio, I just don't know which
one else to indicate.
If I am to post the output of some command line, I'm ready, just give me
the command line to copy and paste and execute.
I bought a USB headphones-mike set because the normal mike
I discovered this with qemu, but now I disinstalled qemu and using kvm
and if you substitute qemu with kvm in my commandlines, the simptom
is EXACTLY equal. It's there
** Changed in: kvm (Ubuntu)
Sourcepackagename: qemu = kvm
** Also affects: qemu
Importance: Undecided
Status: New
--
sorry, it was a mistake on my side :-(
I just didn't spell correctly the command
** Changed in: kvm (Ubuntu)
Status: New = Invalid
--
qemu can't read the keyboard layout files
https://bugs.launchpad.net/bugs/258539
You received this bug notification because you are a member of Ubuntu
Sorry I tried a more readable command line and got a more readable
output too ;-)
[EMAIL PROTECTED]:~$ strace qemu -M pc -hda
/home/adriano/Scrivania/openwrt-x86-jffs2-128k.image -m 64, -k it, -net
nic,vlan=0 -net user,vlan=0,hostname=emu -boot c
execve(/usr/bin/qemu, [qemu, -M, pc, -hda,
Public bug reported:
Binary package hint: qemu
I'm on Ubuntu 8.04.1,
the affected package is qemu 0.9.1-1ubuntu1
This is my command line:
qemu -M pc -hda /home/catonano/Scrivania/openwrt-x86-jffs2-128k.image -m
64, -net nic,vlan=0 -net user,vlan=0,hostname=emu -boot c
With this, the
think) in the
/usr/share/initramfs-tools/hook-functions file and switched from
virtio_pci; do
to
virtio_pci vfat ... etc (as in the patch)... ; do
3) I rebuilt the initramfs image
4) booted with the 2.6.24-17 kernel
it works ! I'm in the 2.6.24-17 right now !
Thanks so much, people !
Bye
Cato
Ubuntu has a too old version of solfege. This is fixed in 3.10.1. But
the workaround mentioned above using --no-sound works fine.
--
solfege crashes at startup
https://bugs.launchpad.net/bugs/206093
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
boot.
I managed to type a
modprobe -v vfat
at the (initramfs) prompt and found out ther was no vfat module.
Since I was at it I also noticed there no ntfs either.
I can't repot any log because there's no filesystem I can mount, without
vfat. Sorry
Thanks
Cato
** Affects: ubuntu
Importance
Public bug reported:
Binary package hint: vlc
The package is build without support for shout, so it is not possible to
use vlc as a streaming source for e.g. icecast.
** Affects: vlc (Ubuntu)
Importance: Undecided
Status: New
--
shout output module missing
57 matches
Mail list logo
