Public bug reported:
Binary package hint: k3b
[I'm using Dapper, stable, up to date.] When using k3b, I like to
select the option to verify the data that was burned to the CD. When
burning is finished, k3b ejects the CD and then retracts it to do the
verify. When the CD is retracted, I get
I'm using the Alternative install CD for Kubuntu, Edgy Eft, Knot 2. I
have two 120GB drives (PATA, Seagate), and I'm trying to set up software
RAID1 across them. I have an Athlon 2800+ with a KT400 chipset.
Here are the steps I follow:
1) [All of the setup prior to the partitioner starting.]
Public bug reported:
I have two identical drives that I have configured as RAID1. I set up
software RAID1 on them and installed Dapper.
After installing, I shut down and pulled the power connector from the
secondary disk. I booted up, and all was fine. [I will file another
bug report related
Public bug reported:
I have two identical drives that I have configured as RAID1. I set up
software RAID1 on them and installed Dapper.
After installing, I shut down and pulled the power connector from the
secondary disk. I booted up, and all was fine.
The thing that really disturbs me is
Public bug reported:
I have two identical drives that I have configured as RAID1. I set up
software RAID1 on them and installed Dapper.
After installing, I shut down and disconnected power from the seconday
disk. Everything booted just fine.
I shut down again and reconnected the secondary
Note: I installed gkrellm (a system monitoring tool), and I have been
able to verify that both drives are indeed being used. So it must be a
GRUB problem.
--
Critical Dapper bug: Cannot boot from seconday RAID1 disk
https://launchpad.net/bugs/58894
--
ubuntu-bugs mailing list
Public bug reported:
This should be a wishlist item, but I also think it's important that it
get into Edgy.
My sound hardware doesn't directly support MIDI, so I have to use
timidity. I don't know how to manually set it up, so I'm still reading
through stuff to get it working.
To be considered
I would like to suggest that, when the user logs in, they should see a
graphical dialog that reports that a drive is missing from the array (or
whatever the situation is) so that they know that there's a problem.
--
Critical Dapper bug: Missing secondary from software RAID1, no message or
I would suggest that, after logging in, the user should see a dialog
that reports that it thinks a new drive has been added that looks like
one they'd like to add to the array and ask them if they want to hot-add
it.
--
Critical Dapper bug: RAID1, reconnect secondary drive, no attempt made to
Public bug reported:
Binary package hint: nedit
I would like to change the menubar font for nedit. The docs from nedit
about this are on this page:
http://fresh.t-systems-
sfr.com/linux/src/nedit-5.5-src.tar.gz:a/nedit-5.5/doc/html/resources.html
The suggestion is to put this line:
Note: It was pointed out by nedit developers that helvetica medium 12
points is not a valid font name. I just wanted to clarify that I did
indeed try several other values for this field, including a number of
valid X11 font names that I know are available.
--
Cannot change nedit menubar font
Here is the bug entry for nedit:
http://sourceforge.net/tracker/index.php?func=detailaid=1553446group_id=11005atid=111005
I'm guessing there's some sort of problem with lesstif not picking up
system settings correctly. Instead of getting the font that all GTK and
Qt apps are using, I get some
Public bug reported:
Binary package hint: konqueror
I'm using the latest up to date Dapper.
If I open a PDF from a web page in Konqueror, it has two Tools menus,
one of which is empty.
** Affects: kdebase (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
Displaying a PDF,
Here, try this page:
http://wiki.duskglow.com/tiki-index.php?page=OGP%20Artwork
Click on the OGA Logo link.
--
Displaying a PDF, Konqueror has two Tools menus, one empty
https://launchpad.net/bugs/59231
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
Public bug reported:
I'm not sure if you can assign a bug to two packages, but this is a bug
in both X11 and Konqueror.
Try this URL:
http://rock.mididb.com/beachboys/
Usually, on the right, there's this ad that flashes really annoyingly
and makes X11 and Konqueror eat lots of CPU.
When I
Public bug reported:
Binary package hint: kde
Start Konqueror
Select Network Folders
Select Add a Network Folder
Add a remote samba share
Try to remove the network folder you cannot.
I've looked at all sorts of configuration stuff and googled for answers
to no avail. It appears that
Public bug reported:
Binary package hint: gtkwave
I've been using gtkwave for a long time. I just switched it Kubuntu,
and I want to continue using it, but the one available from ubuntu seems
to be broken. I have a perfectly valid wave dump file, but I can't get
gtkwave to show me any signals,
I should apologize for the errant bug submission. It turns out that I
was simply unaware of how to add signals. However
Older versions of gtkwave had a nice add signals button on the tool
bar. When trying to figure out how to use this version, I had seen the
search options, but I didn't
Public bug reported:
I realize that adding a new kernel needs to update grub/menu.lst. But
the update script is deleting things it shouldn't.
As part of working around a serious bug (that I have reported, but which
has been ignored) in your installer, I had to manually add grub to the
boot
Public bug reported:
Binary package hint: samba
Occasionally, I'll have a samba mount mysteriously die on me. That is,
the Windows machine is fine, and I can smb mount the share on another
Linux box, but the mount point on the Dapper machine has for some reason
gone stale.
Anyhow, the problem
Public bug reported:
Binary package hint: nedit
I can have an number of nedit windows open on local files. If just one
window is open on a file that is on a samba mount, and that mount point
hangs up, ALL nedit windows freeze. And nedit never recovers. There
doesn't seem to be any sort of
Public bug reported:
Binary package hint: konqueror
From the Konqueror LocationPrint... dialog, I can figure out how to
print the whole document or a subset of pages, but I can't figure out
how to print only a selection I've made on the page. Does that feature
not exist? If it does, I can't
Public bug reported:
I have a Samsung ML-2152W, and I'm using the pxlmono driver. There is
no driver setting for duplexing (which, per se, is also bad), and in
addition, the printer's console setting for duplex is being overridden
(the button on the printer says duplex, but everything prints
Public bug reported:
Binary package hint: konqueror
Go to www.myuhc.com and click on Find Physician or Facility.
Javascript produces an error, claiming that my browser (Konqueror) is
not W3C compliant. KDE developers like to hype their W3C compliance, so
they may want to look into this.
**
Public bug reported:
Binary package hint: adept
When I tell Adept to install flashplugin-nonfree, it _appears_ to hang.
I first thought it was a network problem until I clicked show details.
Then I saw that what had happened is that the installer assumed that it
had a terminal and was waiting on
Public bug reported:
When I install flashplugin-nonfree (see bug #61932), I get (from the
error messages that appear when you show details) the following error
message (the messages are actually copied from manually using apt-get,
because adept does not let me copy from its terminal).
# sudo
My bug (61932) was marked a duplicate of this one. Does that mean it's
confirmed?
Anyhow, it sounds to me like the REAL bug in YOUR case is that it's even
bothering to ask if you want to overwrite the config file. Shouldn't
the pre/post-install script automatically merge your old config changes
Public bug reported:
I'm starting from an unstable install of Dapper that I want to upgrade.
If some of these problems I'm reporting are due to old bugs, you might
want to check to make sure that the updater updates itself first
whenever someone wants to upgrade.
After going through several
When I run adept_updater from the command line, this is what I get:
sudo adept_updater
kapture::PkgSystem::PkgSystem()
adept_updater: PackageDetails::setPackage()
adept_updater: PackageInfo::setPackage()
adept_updater: ERROR: Communication problem with adept_updater, it probably
crashed.
KCrash:
Two potential causes come to mind as to what might be going wrong:
(1) Some kind of breakage occurs in nedit or lesstif (probably lesstif,
given what people are saying about a related bug) that makes it stop
working.
(2) Lesstif does not interact correctly with the environment (X11, KDE,
etc.)
Public bug reported:
Binary package hint: kaffeine
Note that this is not a complaint about specific unsupported codecs.
Also note that other people claim to have been able to get this working,
so I hesitate to report this as a bug. But there seems that there is a
bug.
I'm using Dapper, and I'd
** Summary changed:
- Kaffeine unable to find installed codecs
+ Kaffeine fails silently on missing codecs
** Description changed:
- Binary package hint: kaffeine
+ When Kaffeine is missing a codec, it fails silently. For the new user,
+ there is no way to tell what's gone wrong, and no clues
Public bug reported:
A few references to start off with:
http://www.ubuntuforums.org/showthread.php?t=283881
https://launchpad.net/distros/ubuntu/+source/partman-md/+bug/22301
https://launchpad.net/distros/ubuntu/+bug/58892
https://launchpad.net/distros/ubuntu/+bug/58893
I have encountered a probably related problem. I have a Samsung ML-
2152W (and my driver is postscript).
On the printer's panel, I have duplex off. From System Settings
application (from the main KDE menu), I selected my printer and disabled
duplexing.
Yet, any postscript document I printed
I am experiencing similar problems with KDE's control panel versus other
KDE apps. If I set duplexing in the control panel, it affects nothing.
If I set duplexing when printing from Konqueror, it affects EVERYTHING.
This is true whether I'm printing from an app that's aware of duplexing
or just
Public bug reported:
Binary package hint: kde
Regarding: Kmenu System Settings Printers Properties Driver
If I use this to configure driver settings for duplexing, it has no
affect one way or the other. The settings here are completely ignored.
If I go to print from Konqueror, and I
Public bug reported:
Binary package hint: konqueror
I'm using Dapper with the latest updates.
Have a look at this page:
http://en.wikipedia.org/wiki/Wikipedia:Hebrew
And search for the paragraph that starts with, Although Shva Na is not
transcribed, an exception is made.
There are two places
Public bug reported:
Have a look at this page:
http://en.wikipedia.org/wiki/Wikipedia:Hebrew
Search for the line that says, The Hebrew letter Chadi (צ׳) is spelled
with the English letter combination, ch (as in chips).
Notice how there's a box to the left of the tsadi (chadi) letter, rather
Public bug reported:
Binary package hint: kde
Whenever I try to print a text file, it puts the text outside of the
printable margins.
1) There needs to be an option to set this somewhere. I haven't been
able to find it. If it's there, it's well-hidden.
2) There should be reasonable default
I would like to verify that I observe this bug too. It's like
copy/paste functionality comes and goes. Sometimes, I can click away
from a document then refocus the window, and copy/paste will work again.
Sometimes, it works in some nedit windows and not others at the same
time. Once the problem
Public bug reported:
Have a look at this page:
http://en.wikipedia.org/wiki/Wikipedia:Hebrew
Search for the line that says, The Hebrew letter Chadi (צ׳) is spelled
with the English letter combination, ch (as in chips).
Notice how there's a box to the left of the tsadi (chadi) letter, rather
Actually, I manually reconfigured it by changing the PCI bus ID in the
xorg.conf file. I never tried running dpkg-reconfigure. (I'm just
lucky that I have a bit of inside knowledge about how to configure
X.org.)
I content that the typical desktop user will not know anything about
Any specific reason why it's been rejected?
--
Feature request: Please add reiser4 support, if possible
https://launchpad.net/bugs/31849
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: konqueror
This web page causes all sorts of havoc with Konqueror:
http://blogs.pcworld.com/techlog/archives/002950.html
Right-clicking on one of the embedded flash viewers hangs up the X
server. First, a context menu appears, but it's inoperable.
Public bug reported:
Binary package hint: adept
I started Adept, Fetched updates, asked for a Full Upgrade, and then
told it to apply changes. The Preview says it's going to upgrade a
single package, libpq4. Adept reports that it's Done, but it's frozen
solid. After killing the adept process,
Public bug reported:
Binary package hint: adept
I'm using Dapper, fully updated.
(1) Start Adept and click on Fetch Updates
Note that when it's done, I get back to the screen where you can search
for packages. However, although nothing is typed into the search line,
it shows no packages.
(2)
Public bug reported:
At the Ohio LinuxFest in 2005, I spoke at length with one of the Ubuntu
developers who convinced me to convert to Ubuntu. Apparently, he
convinced me under false pretences.
See, I had been using Gentoo, and one of the most nightmarish things
about it was the breakages that
Public bug reported:
I have added a second printer to my network and used the System
Settings program in KDE to add it. Now, every application in the
system can see this new printer and print to it successfully.
Except OpenOffice.
Closing all OOo windows and reopening doesn't help either. And
Here's another one:
https://launchpad.net/distros/ubuntu/+bug/70085
--
Meta-bug: Ubuntu needs major software RAID overhaul
https://launchpad.net/bugs/68308
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
See this web page for a howto on RAID.
http://www.linuxsa.org.au/mailing-list/2003-07/1270.html
I'm using RAID1, and I'd like to boot from the secondary disk if the
first one is dead. To do that, you need to add another entry to the
list for the kernel that replaces
I've been using a stable install of Dapper for some time now. I can't
say that I've done a lot of CD insertion, actually, but I haven't
noticed the problem. The issue with the unstable build was that it
would work fine, and then something would break, and then it wouldn't
recognize CDs anymore.
Public bug reported:
Binary package hint: adept
When I try to start Adept from the K menu, I am asked for my password,
but Adept doesn't start. When I start it from a Konsole, it will start
up (the messages I get don't mean much to me), but it won't install
anything, making some comment about
You might want to reconsider. I think it's important to put usability
as a higher priority than avoiding awkward programming. Not putting
usability first is one of the things that keeps Linux off of more
desktops.
--
Please move machine name selection to earlier or later in the install process
I really don't have time to draft a spec on this. But just because I
don't have time for this doesn't mean that it isn't a bug in the sense
that this causes people a lot of trouble. This is an issue that should
remain open until there's a general solution to it. That is to say, the
fact that I
Sweet. Since I'm the beggar and not the one actually doing the spec, I
humbly make some suggestions.
One is a stop-gap measure to deal with config files as they currently
are. What you need for a merge are three files: (1) the old config
file, unmodified, (2) the old config file, modified, and
I've been in contact with someone at macfixit.com about this. They
track MacOS bugs. They did some experiments and couldn't reproduce the
problem. Could someone else try to see if, for instance, the original
permissions of the files being burned are consistent with what's on the
disk and that
Note that I've submitted a complementary bug report to Apple. Don't
count on them fixing it, though -- you know how it is with the
proprietary vendors. So Ubuntu should take the high ground on this one.
--
Insert CD -- mounts with all file permissions -rwx--
I'm afraid that I haven't used KDE in quite a while. This bug was one
of the contributing reasons. However, since I haven't heard anything
from the Lesstif bug report I submitted, it would be safe to assume that
nothing's been done to fix it.
--
KDE clipboard (klipper) incompatible with
In any case, adept processes shouldn't be left lying around so that
users have to manually kill them.
--
[Dapper] Adept won't start -- many defunct adept processes
https://bugs.launchpad.net/bugs/63036
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
This one:
http://www.newegg.com/Product/Product.aspx?Item=N82E16827151133R
--
Burning CD/DVD, starvation, doesn't use burn-proof
https://bugs.launchpad.net/bugs/72886
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
I haven not noticed any problems like this recently.
--
Adept freezes solid during upgrade of libpq4 package.
https://bugs.launchpad.net/bugs/68678
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for adept in ubuntu.
--
kubuntu-bugs mailing
It's hard to say. You can boot the live CD with 600M, but the installer
freezes. If you get past the install, then boot freezes. When the
installer has frozen, however, the rest of the system is okay. Only the
installer is locked up.
--
Feisty won't boot under Parallels if VM has more than
I'm booting whatever the distro defaults to. Note that this same
problem happens with the most recent releases of Dapper and Edgy. Same
exact behavior.
--
Feisty won't boot under Parallels if VM has more than 596 megs
https://launchpad.net/bugs/88563
--
ubuntu-bugs mailing list
Public bug reported:
I have a Radeon 9200SE that I've used many times before with Ubuntu. It
has two monitor ports. One DVI-I, and another VGA. I'm installing
8.04.1, and now I'm having a problem with graphics.
If I boot the live CD with an analog monitor connected to the DVI-I port
with an
The important aspect of my original report was that not only did it grab
100% CPU, but it appears that the plugin grabbed all keyboard/mouse
input. In other cases where something eats 100% CPU, the OS scheduler
allows other processes to work anyhow, so if I click on some other app's
windows, that
The fact that the tsadi appears would suggest to me that the package was
probably installed. Wouldn't it be very strange to have only SOME of
the Hebrew letters installed? In any case, like I said, Firefox renders
the chupchik correctly, so it's probably a KHTML/Konqueror bug.
But let's say,
Since then, I have generally avoided using nedit over NFS or other
network-mounted file system. However, I know of no development in nedit
that would have affected this. People are still endlessly debating the
clipboard problems. If I were you, I would assume that this is still a
problem. It's
I would love to take your suggestion, but unfortunately, I'm just too
busy. With a day job, my own startup (Traversal Technology), a research
assistantship, other responsibilities regarding my Ph.D., and my own
open source project (Open Graphics), I just have too many things on my
plate. I chose
It has happened a number of times since I reported the bug.
Unfortunately, it's always after using the browser with other flash
things for some time before it hangs up.
I'm using a Radeon 9250 with the open source drivers.
--
nspluginviewer hangs up whole X server
BTW, I haven't upgraded yet to Edgy or Feisty. It'll be a while before
I'll be prepared to do that.
--
nspluginviewer hangs up whole X server
https://bugs.launchpad.net/bugs/66573
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kdebase in
You have been subscribed to a public bug:
Binary package hint: kde
Whenever I try to print a text file, it puts the text outside of the
printable margins.
1) There needs to be an option to set this somewhere. I haven't been
able to find it. If it's there, it's well-hidden.
2) There should be
Public bug reported:
I just did a clean install of 9.04 server rc. I did have a heck of a
time wresting with partman, but I finally, after several tries, got my
disks set up with mdraid. (I had trouble like this with partman as far
back as Gutsy.)
Here's my partition layout (same on both
Public bug reported:
I'm trying to install 9.04 server rc, and I've noticed that there are no
options for setting up a static IP address. This is a server
distribution, which means that most of the time, static IP is going to
be preferable, so I would expect the installer to assume this. Still,
After some research, I found a temporary work-around. When the boot
fails, I get dropped into busybox. I can type this:
mdadm -As
exit
And then it boots fine. How do I fix this permanently?
--
9.04 server rc clean install mdraid no block devices found
https://bugs.launchpad.net/bugs/363434
Here's another person who ran into this problem:
http://ubuntuforums.org/showthread.php?t=1121121
--
9.04 server rc clean install mdraid no block devices found
https://bugs.launchpad.net/bugs/363434
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Well, in that case, something else is broken, because DMA capability
should be automatically detected, right?
--
K3b slow dvd burn speed
https://bugs.launchpad.net/bugs/31709
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
** Description changed:
A few references to start off with:
http://www.ubuntuforums.org/showthread.php?t=283881
https://launchpad.net/distros/ubuntu/+source/partman-md/+bug/22301
https://launchpad.net/distros/ubuntu/+bug/58892
https://launchpad.net/distros/ubuntu/+bug/58893
Public bug reported:
This is a kernel bug. Actually, it's intended behavior, but it
shouldn't be.
In theory, fake RAID and software RAID should be the same thing. The
only practical difference is where they get their metadata from. One
from the system BIOS, the other from the disk. However,
Can we raise the priority on this? Nedit is a popular editor. In fact,
it's one of the few I can stand to use. Also, can we find out who
maintains Lesstif?
I think this is one of those cases where a major distro, like Ubuntu, is
going to have to throw its weight around to get anything done on
Here's my January 2007 post to the Lesstif bug database on this issue:
http://sourceforge.net/tracker/index.php?func=detailaid=1637320group_id=8596atid=108596
There are currently only 5 comments on this. How about we get some
additional posts there to let them know that this is still a problem
I have this same RTL8111B chip on my MSI X48 Platinum, and I have
problems with it too. I've been looking around, and I have found some
other discussions about this. When using this chip with either Ubuntu
(Gutsy was the last version I had on there) and Gentoo, transferring a
moderate amount of
I haven't tried Hardy or Intrepid because I switched to Gentoo on that
box. (Ubuntu on the desktop, but I wanted a totally stripped system for
my compute machine.)
Anyhow, here's what lspci tells me:
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit
I'll try the live CD. My evidence that it was the NIC is that when all
I did was switch to using the Intel NIC, I no longer had any trouble.
Mind you, there could be a defect in the board. But the hang I observe
seems so much like the others that I don't want to call it a
coincidence.
--
I want to thank you very much, Dustin Kirkland, for all of the work I
have seen you put into the various RAID issues I and others had observed
with Ubuntu. It's people like you who polish the little things that
turn a good Linux experience into a fantastic Ubuntu experience.
Although I have
Public bug reported:
In trying to get a Verizon EVDO usb cellular modem to work with Ubuntu,
the system is incorrectly recognizing it as a USB mass storage device,
which is likely what's making me completely unable to make it work
properly.
When I plug the device in, this is what I see in
I think it was Dapper Drake I was using with that card. Since I gave
away the chassis of the computer I was testing this in, I may have some
trouble finding another to test in. I'll see what I can do. The same
problem happens with the live CD. BTW, this is an off-brand graphics
card with an
I'm definitely an experienced user, but this one definitely flummoxed me
for longer than I would like to admit. I would never have expected
something like this would happen, so it stumped me. It doesn't seem
logical that a read-only removable device would show up with permissions
like this.
--
Public bug reported:
After a great deal of trial and error, I have figured out that if
Parallels has a VM size greater than 596 megs, the installer hangs up
(at 91%, observed already by a number of other people on other real
hardware), and also, after installing under a smaller VM, the system
I'm afraid I can't try Feisty for my main desktop. I'm running software
RAID, which is known to get broken during upgrades (on top of all of the
other horrors that happen in Dapper - Edgy upgrades).
I did try installing Feisty under Parallels, but the installer always
locks up, so I had to use
I'm having this same exact problem with the Feisty daily build from
2007-2-3. I'm installing under Parallels, which emulates relatively
tame hardware.
--
hw-detect freezes on Dell Latitude 600
https://launchpad.net/bugs/69353
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Interesting. I'm having this problem when installing 6.06 also. Always
locks up on aec62xx, at 91%. Same problem for both Feisty and Edgy.
--
hw-detect freezes on Dell Latitude 600
https://launchpad.net/bugs/69353
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This problem doesn't happen incredibly often, but it does happen now and
again, and it still happens even now. Sometimes, Adept will get stuck
in some way that makes it not quit properly. The window is gone,
because I told it to close, but the process is still running. When I
later decide to
There are many who are stuck on Dapper, because we CANNOT upgrade. Much
horror results when we try. It would be most agreeable if these fixed
could be backported to Dapper as well.
--
Adept has trouble handling interactive installation scripts
https://launchpad.net/bugs/39756
--
kubuntu-bugs
Public bug reported:
Binary package hint: konqueror
(1) Open Konqueror to www.orbitz.com
(2) Click on the Leave date field and then select a date
(3) Click on the Return date field and then select a date
(4) Konqueror crashes with SIGSEGV
On bugs.kde.org, there are a number of resolved bugs
Has anyone pushed this upstream to KDE, Nedit, and Lesstif folks? This
bug has been outstanding for a LONG time, and it's really a nuisance!
--
Nedit bug attributed to lesstif
https://launchpad.net/bugs/72798
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: konqueror
The following page displays correctly in Firefox but not Konqueror
(3.5.2):
http://en.wikipedia.org/wiki/Prime_number
Search for // arbitrary search limit. The symbol between limit and
100 does not display properly. Note that it DOES
Public bug reported:
QuiteInsane is the SANE (scanner) plugin used by GIMP. I recently did
an update of various things, including a kernel update, using Adept.
Now, QuiteInsane gives me errors when I want to scan.
Here are things I have learned when diagnosing it:
- All of this worked well
Public bug reported:
The description of the ntp-simple package says it's a daemon. After
installing it, I find no ntp daemon, and it's not up after reboot
either.
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
ntp-simple doesn't start on boot
Part of a message from the NEdit list:
We are aware of various clipboard locking problems with some versions of
Lesstif and OpenMotif, but to the best of our knowledge, the problems
are in (some versions of) those libraries. An often common factor is
that KDE's clipboard manager (Klipper) is
Part of an email from NEdit list:
We are aware of various clipboard locking problems with some versions of
Lesstif and OpenMotif, but to the best of our knowledge, the problems
are in (some versions of) those libraries. An often common factor is
that KDE's clipboard manager (Klipper) is
1 - 100 of 170 matches
Mail list logo
