I'm having a similar problem, the mouse doesn't connect after restart. I
have been using interpid since the beta, and had no problems with this
untill I made fresh install of ubuntu. Then suddenly this is an issue :(
--
Bluetooth mouse stops after a while
https://bugs.launchpad.net/bugs/292030
So booting and logging in with no cables attached doesn't help you?
That's odd, cause after I became consequent on not booting with the
cables plugged in, I've had no problems. I feel for you, it's
frustrating!
--
Screen gets split (or dark) when connector is HDMI-1 (intel, Intrepid, hdmi)
It was Wincklers fix that didn't work with alot of network traffic. Now
I've installed the 10.10 modules, but something in yesterdays update
broke my wireless completely somehow, so I don't know the result yet
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
After installing the new module, no wireless networks shows up, so I
cannot confirm if this works or not
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
It's not any danger compiling this yourself with regards to the e1000e
problems?
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Well, I tried the module, and it won't connect to my wireless network..
To bad!
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
And how do I remove this module? I tried sudo make unistall, didn't
work. Where are the modules located?
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I can confirm that I disabled all but the spelling plugin, and now it's
working great! It may very well be the File Browser Pane plugin that
daspooky pointed out!
--
Gedit is very slow when starting in Intrepid
https://bugs.launchpad.net/bugs/280411
You received this bug notification because you
Sorry, a typo, sudo make uninstall works fine. But the problem is to
unload mac80211 and cfg80211, it says the modules are in use. But
anyways, I'll try the disable option you mentioned Winckler!
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received
Winckler, it works for me!! :)
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
No, it worked BETTER, but it didn't fix it. After starting Vuze and
downloaded some torrents, it paniced again! Would be greatfull if
someone could explain how to unload the mac80211 and cfg802 modules and
use the compiled ones?
--
iwlagn causes kernel panic on 802.11n wifi
I believe it's the same thing happening to me now. I've moved to some
friends with a n-network, and suddenly I got alot of cernel panics. I
killed gdm and switched to terminal, and got to take this picture of the
screen. Hope this helps
** Attachment added: 11102008102.jpg
This also happens trying to connect a Toshiba 46 lcd-tv. Xrandr always
suggest 4:3 or 5:4. There should be a way to override/force resoluion
--
Xrandr doesn't detect displays right (intrepid beta)
https://bugs.launchpad.net/bugs/279025
You received this bug notification because you are a member
I've tested this a little more, and it seems it's not slow opening a
blanc document, like just running gedit command, eighter as root or
regular user. Also opening a file from terminal, like sudo gedit
/etc/X11/xorg.conf goes quick. BUT double clicking a file in home
folder, like just containing
How do I install the backported modules? I have added the backport repo,
but what's the package I need? I'm eager to get the wifi working
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member of Ubuntu
No, the dir is empty
--
Gedit is very slow when starting in Intrepid
https://bugs.launchpad.net/bugs/280411
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I've somewhat narrowed down the problem. It only happens when the tv is
discovered as HDMI-1. When that's the case the screen gets split. Then
I usually do a (couple of) reboot and hope that it gets discovered as
TMDS-1 instead, because then it always connect correct!
I don't know the underlying
I have this bug now with Intrepid! Is this way old bug still not
fixed???
--
evolution message text appears backwards when replying to html mail
https://bugs.launchpad.net/bugs/25695
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
Having the same issue! And it's veeery annoying!
--
Evince doesn't print PDF files
https://bugs.launchpad.net/bugs/227186
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This is actually the same bug as this one I've reported earlier: Bug #27909.
I didn't know at the time, but now I've realized that the black screen on my
22 also happens when the connection is discovered as HDMI-1. Killing x and
removing cable doesn't change this, but a real reboot sometimes
*** This bug is a duplicate of bug 279100 ***
https://bugs.launchpad.net/bugs/279100
I've realized that this happens when xrandr reports the connector to be
HDMI-1. When it's discovered as TMDS-1 everything works fine. Due to
this this is a duplicate of bug #279100
** Summary changed:
-
** Summary changed:
- Connecting lcd-tv via hdmi (intel) to laptop results in split screen
(Intrepid)
+ Screen gets split when connector is HDMI-1 (intel, Intrepid, hdmi)
** Description changed:
Binary package hint: xorg
Connecting a 720p tv to laptop using xrandr (and only having
** Summary changed:
- Screen gets split when connector is HDMI-1 (intel, Intrepid, hdmi)
+ Screen gets split (or dark) when connector is HDMI-1 (intel, Intrepid, hdmi)
** Description changed:
Binary package hint: xorg
Connecting a 720p tv to laptop using xrandr (and only having output on
** Attachment added: working
http://launchpadlibrarian.net/18979002/xrandr%20--verbose%20tv%20p%C3%A5
--
Screen gets split when connector is HDMI-1 (intel, Intrepid, hdmi)
https://bugs.launchpad.net/bugs/279100
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Description changed:
Binary package hint: xorg
Connecting a 720p tv to laptop using xrandr (and only having output on
tv, no virtual size) can result in split view on tv (see picture)
EDIT: This only happens when the connector is HDMI-1 instead of TMDS-1
(wich works fine)
I
** Description changed:
Binary package hint: xorg
Connecting a 720p tv to laptop using xrandr (and only having output on
tv, no virtual size) can result in split view on tv (see picture)
EDIT: This only happens when the connector is HDMI-1 instead of TMDS-1
(wich works fine)
I
I'm having trouble as well. Using Intrepid, and the Google calendar worked
first time I tried with one calendar when it was beta. Now it doesn't work at
all, keeps on asking for password although remember password is checked.
It would be really nice if this bug got fixed, I miss being able to
The same is happening with me in my two instalations of Hardy Heron
Beta. The sound is playing pretty fine with the only problem of end
session sound.
--
Logout/Shutdown Sound Not Working In Hardy beta
https://bugs.launchpad.net/bugs/214370
You received this bug notification because you are a
Throsten,
Thank you! Your modification fixed also my problem. By the way I believe
this should be corrected by an update to all users because this can
happens with newbie.
Best regards,
Adilson
--
jockey-gtk crashed with AttributeError: 'tuple' object has no attribute
'getSections'
Here is happening exactly the same symptom.
The strange thing is that before installing this final version of Hardy,
in the same PC I was with the Beta version installed and updated without
any problem.
Does anybody knows the solution for that?
Thank you!
Junior
--
Hardy takes a long time
Have the same problem. It's just that xorg.conf gets overridden by
something. Evrytime i reboot my screen is down to 600 something. I have
a 1280x800 nvidia laptop. The problem occurs when I tried connecting a
projector trough displayconfig, and it sets the resolution to 600. But
then
Public bug reported:
Hi,
In new ubuntu 8.04, with gnome 2.22.1, when I copy or move files in
nautilus, I get strange characters.
I installed ubuntu spanish version and it worked fine everything. And
suddenly when I copy files in the new pop up window in nautilus got some
rare characters, I
** Attachment added: Pantallazo.png
http://launchpadlibrarian.net/14176851/Pantallazo.png
--
strange characters when copying
https://bugs.launchpad.net/bugs/226250
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Hi Alexander,
this is what i get when I enter
$ env | grep proxy
http_proxy=http://172.16.200.1:3128/
no_proxy=localhost,127.0.0.0/8,*.local
even if I open a firefo from the same terminal happens the same.
Thanks and regards,
Jose Luis Jr. Garza
--
Use system proxy settings doesn't take care
Great!!!
I just have updated my firefox from ubuntu repositories, and now it
works correctly.
Thanks Alexander.
---
Jose Luis Jr. Garza
--
Use system proxy settings doesn't take care of proxy exceptions list in Gnome
proxy settings
https://bugs.launchpad.net/bugs/226823
You received this bug
Hi Mat,
Correct me if I'm wrong, but 72.5.65.144 is not in range 72.5.65.0/24,
right?
If so, just in Gnome Network Proxy settings set 72.5.65.0/144 or
something like that
---
Jose Luis Jr. Garza
--
Use system proxy settings doesn't take care of proxy exceptions list in Gnome
proxy settings
I have the same issue.
And this is frustrating.
Any help or solution on this would be appreciated.
Regards,
Jose Luis Jr. Garza
--
Use system proxy settings doesn't take care of proxy exceptions list in Gnome
proxy settings
https://bugs.launchpad.net/bugs/226823
You received this bug
Same problem here, it complains that it's been disconnected unsafe. But
it doesn't cause me any problems really.. I have a n95, and it's been
like this in all Feisty, Gutsy and Hardy.
--
Nokia's N80 Data Transfer USB profile fails to umount
https://bugs.launchpad.net/bugs/128790
You received
Public bug reported:
when i want to douwnload sonting then firefox cloase
ProblemType: Crash
Architecture: i386
CrashReports:
600:0:0:635927:2007-05-24 20:07:34.0 -0400:2007-05-24
20:08:07.0 -0400:/var/crash/_usr_bin_gbx.0.crash
600:1000:1000:10351570:2007-05-27
** Attachment added: ApportLog.txt
http://librarian.launchpad.net/7851819/ApportLog.txt
** Attachment added: Dependencies.txt
http://librarian.launchpad.net/7851820/Dependencies.txt
** Attachment added: ProcMaps.txt
http://librarian.launchpad.net/7851821/ProcMaps.txt
** Attachment
Public bug reported:
ninguna
ProblemType: Bug
Architecture: i386
Date: Tue Aug 5 11:56:17 2008
DistroRelease: Ubuntu 7.04
Uname: Linux ubuntu 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
GNU/Linux
** Affects: ubuntu
Importance: Undecided
Status: New
--
Estudiante
Actually, it works fine for me now! I reinstalled ubuntu since I had
been following from beta and up, and now it works with my one private
google calendar! Perfect!
--
evolution google calendar doesn't work with private calendars
https://bugs.launchpad.net/bugs/210090
You received this bug
Any way of getting this fix in Hardy? Was it a cairo-bug?
--
Evince doesn't print PDF files
https://bugs.launchpad.net/bugs/227186
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
After the latest update of the kernel I got panics again. But I've got
linux-image-2.6.27-8-generic installed, so is the panic due to something
else??
--
iwlagn causes kernel panic on 802.11n wifi
https://bugs.launchpad.net/bugs/276990
You received this bug notification because you are a member
Niiice! I've been anoyed by this tearing, but actually just thought it
was my video-card since I've been using nvidia earlier.. This xorg-
patch-thing worked like a charm it seems. Just wondering what the
benefits of textured video are and why we would want it? And when the
new driver from intel
I installed the interpid-proposed patch and never had kernel panics
after that. BUT after the latest kernel upgrade (the -9 I guess) I've
gotten many of them! I guess it's this bug that suddenly is reoccuring.
Is there any action required after kernel upgrades?
--
iwlagn causes kernel panic on
Public bug reported:
I send the system into standby, after 5 minutes i forced to get back to
work. This worked good. After sending it again into standby and leave it
about half an hour in this mode. the system woke up with no display. No
terminal could be switch to. So i made a hard reset.
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33875586/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33875590/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
Public bug reported:
I send the system into standby, after 5 minutes i forced to get back to
work. This worked good. After sending it again into standby and leave it
about half an hour in this mode. the system woke up with no display. No
terminal could be switch to. So i made a hard reset.
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33875557/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33875558/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
Public bug reported:
I send the system into standby, after 5 minutes i forced to get back to
work. This worked good. After sending it again into standby and leave it
about half an hour in this mode. the system woke up with no display. No
terminal could be switch to. So i made a hard reset.
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33875522/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33875523/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
Public bug reported:
..
ProblemType: Package
Architecture: i386
Date: Tue Nov 3 14:09:29 2009
DistroRelease: Ubuntu 9.10
ErrorMessage: sub-processo novo script pre-installation retornou estado de
saída de erro 128
InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.2)
** Attachment added: AptOrdering.txt
http://launchpadlibrarian.net/35036499/AptOrdering.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/35036500/Dependencies.txt
** Attachment added: Dmesg.txt
http://launchpadlibrarian.net/35036501/Dmesg.txt
** Attachment
Public bug reported:
Intrepid doesn't always propose the correct resolution after reboot. It
detects my 16:10 monitor as low resolution 4:3. Connect via VGA works
fine. It's connected to a laptop with lower resolution, so I don't use
the virtual size, always just one screen turned on at the time.
** Attachment added: resolutionbug2.png
http://launchpadlibrarian.net/18254970/resolutionbug2.png
--
Xrandr doesn't detect displays right over hdmi (intrepid beta)
https://bugs.launchpad.net/bugs/279025
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: techmar on laptop screen.png
http://launchpadlibrarian.net/18255009/techmar%20on%20laptop%20screen.png
** Changed in: xorg (Ubuntu)
Sourcepackagename: None = xorg
** Description changed:
Intrepid doesn't always propose the correct resolution after reboot. It
detects
two desktops on my tv (don't know why it does this)
** Description changed:
- Intrepid doesn't always propose the correct resolution after reboot. It
- detects my 16:10 monitor as low resolution 4:3. Connect via VGA works
- fine. It's connected to a laptop with lower resolution, so I don't use
-
** Description changed:
Bug1:
Intrepid doesn't always propose the correct resolution after reboot. It
detects my 16:10 monitor as low resolution 4:3. Connect via VGA works fine.
I've found a trick for getting xrandr to propose the right resolution, and that
is to connect a lcd-tv 32 to the
Ok, sorry. I just felt they were pretty much related to the same thing,
using hdmi to connect to external monitor. Now I've struggled for two
hours to get my monitor and tv to work again, I and I haven't figured
out the trick. Just updated with todays updates though, maybe that was
it?
Attached
Public bug reported:
Binary package hint: xorg
Often, connecting my laptop to external monitor using xrandr and hdmi, it
results in a black screen. (No dualhead or twinviews, only lcd)
VGA connects fine.
It works some times, but it's alot of trying and failing, rebooting and trying
over again
** Attachment added: Xorg.0.log attached
http://launchpadlibrarian.net/18260417/Xorg.0.log
--
Sometimes xrandr just result in a black monitor using hdmi (intel, Intrepid)
https://bugs.launchpad.net/bugs/279097
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: xorg
Connecting a 720p tv to laptop using xrandr (and only having output on
tv, no virtual size) can result in split view on tv (see picture)
** Affects: xorg (Ubuntu)
Importance: Undecided
Status: New
--
Connecting lcd-tv via hdmi
** Attachment added: 06102008098.jpg
http://launchpadlibrarian.net/18260459/06102008098.jpg
--
Connecting lcd-tv via hdmi (intel) to laptop results in split screen (Intrepid)
https://bugs.launchpad.net/bugs/279100
You received this bug notification because you are a member of Ubuntu
Bugs,
My Xorg.0.log
** Attachment added: Xorg.0.log
http://launchpadlibrarian.net/18260465/Xorg.0.log
--
Connecting lcd-tv via hdmi (intel) to laptop results in split screen (Intrepid)
https://bugs.launchpad.net/bugs/279100
You received this bug notification because you are a member of Ubuntu
I've had it working earlier to day and all weekend yes. But after a
visit to Vista, it all broke. And I couldn't get it to work at all, just
a big mess. But after the update it worked again, but that might just be
a coincident.
--
Xrandr doesn't detect displays right over hdmi (intrepid beta)
It is still very existing and real I'm afraid. As I am speaking xrandr
won't propose my 16:10 correct eitghter on hdmi or vga. Is the bug filed
in a wrong place since you've marked it as not needing to be fixed in
xorg (ubuntu)??
** Changed in: ubuntu
Sourcepackagename: xorg = None
Status:
Public bug reported:
In Hardy you got asked if you wanted to keep new settings. So if all
displays went black, you could hit escape and get back. This was very
useful with the buggy xrandr, cause my displays often get black, and now
killing x is the only solution
** Affects: gnome-control-center
Public bug reported:
Binary package hint: xserver-xorg-video-intel
Connecting external monitor using screen resolution applet is causing x
to restart after hitting apply. One should at least get an warning that
x is about to restart for new settings to take affect so programs ect
could be
** Changed in: xserver-xorg-video-intel (Ubuntu)
Sourcepackagename: xorg = xserver-xorg-video-intel
--
Connecting lcd-tv via hdmi (intel) to laptop results in split screen (Intrepid)
https://bugs.launchpad.net/bugs/279100
You received this bug notification because you are a member of Ubuntu
** Changed in: xserver-xorg-video-intel (Ubuntu)
Sourcepackagename: xorg = xserver-xorg-video-intel
--
Sometimes xrandr just result in a black monitor using hdmi (intel, Intrepid)
https://bugs.launchpad.net/bugs/279097
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: my xorg.0.log
http://launchpadlibrarian.net/18288892/Xorg.0.log
--
X sometimes crashes after hitting apply in screen resolution applet (Intrepid)
https://bugs.launchpad.net/bugs/279568
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: xorg.0.log
http://launchpadlibrarian.net/18288914/Xorg.0.log
--
Screennresolution applet no longer ask if you wan't to keep new resolution
settings
https://bugs.launchpad.net/bugs/279569
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Summary changed:
- Xrandr doesn't detect displays right over hdmi (intrepid beta)
+ Xrandr doesn't detect displays right (intrepid beta)
** Description changed:
Intrepid doesn't always propose the correct resolution after reboot. It
- detects my 16:10 monitor as low resolution 4:3. Connect
Public bug reported:
Binary package hint: evince
I have a pdf with a lot of email addresses, witch are linked as
mailto:[EMAIL PROTECTED] In acrobat they get opened by Outlook, but
evince sends it to firefox as login details name at site office.com.
It should just send it to email-client.
I've gotten this problem again, and struggled for hours before the luck
hit me. I believe it has something to do with x crashing after hiting
apply. Cause the last time when it finally worked, x didn't crash on me.
I'll have to check this further next time. But you can see from
screenshot one of
Public bug reported:
Binary package hint: bluez-gnome
This option was earlier configurable with last version in preferences.
Now it's also not possible to initiate sending a file from mobile to
computer (due to this, I guess).
** Affects: bluez-gnome (Ubuntu)
Importance: Undecided
Public bug reported:
Binary package hint: xserver-xorg-video-intel
Not much more to say, other than that nothing happens when pushing help
** Affects: xserver-xorg-video-intel (Ubuntu)
Importance: Undecided
Status: New
--
Help-button doesn't work in screen resolution applet
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Incomplete = New
** Attachment added: xrandr output when thing on screenshot appeared
http://launchpadlibrarian.net/18346318/xrandr
--
Xrandr doesn't detect displays right (intrepid beta)
https://bugs.launchpad.net/bugs/279025
Public bug reported:
Binary package hint: gedit
After installing Intrepid beta Gedit has become veery slow when starting (ex
opening a regular text-file)
It didn't use to be that way! It takes about ten seconds to open it's
interface, and another 5 seconds to show the content (for a small
Yea, I know I can browse, but I don't know. Somehow I like more the
ability to just push send on my phone, or when someone else wants to
send something to me.
Installed the gnome-user-share, but sending from my phone is still
impossible. It was possible with the first Intrepid Beta.
--
No
Yes, I have enabled that. I've also done a reboot, but that didn't help.
A nother ting, ti's not possible to use right-click and send to
bluetooth anymore. I get an error saying obex push is not supported. And
that's a MAJOR drawback...
--
No option to accept all incoming requests ect
I must say I like the fix from comment #2 best (with metacity
--replace): With the xorg.conf fix I get a lot of blue everywhere, and
it integrates poorly with compiz.
BUT I have a big problem witch none of these methods fix; I'm running
XBMC and I love it! But no matter what I do, I get tearing
Well I found out that using sync to vblack in settings fixed it, though
I feel that option makes my system more resource hungry..
--
video tearing with textured video on intel card
https://bugs.launchpad.net/bugs/278318
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: CoreDump.gz
http://librarian.launchpad.net/6933760/CoreDump.gz
** Attachment added: Dependencies.txt
http://librarian.launchpad.net/6933761/Dependencies.txt
** Attachment added: Disassembly.txt
http://librarian.launchpad.net/6933762/Disassembly.txt
** Attachment
/i686/cmov/libc.so.6
#1 0xb771e984 in ?? () from /usr/lib/skencil/Sketch/../Lib/paxmodule.so
#2 0xb79a8560 in ?? ()
#3 0x in ?? ()
StacktraceTop:
free () from /lib/tls/i686/cmov/libc.so.6
?? () from /usr/lib/skencil/Sketch/../Lib/paxmodule.so
?? ()
?? ()
Uname: Linux Junior 2.6.20-12
Public bug reported:
fadfadfe
** Affects: update-manager (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/946279
Title:
fadf
To manage
Private bug reported:
when I was doing a system update crashed it shut all the windows were
open.
ProblemType: Crash
DistroRelease: Ubuntu 12.04
Package: gnome-shell 3.3.92-0ubuntu1
ProcVersionSignature: Ubuntu 3.2.0-20.32-generic-pae 3.2.12
Uname: Linux 3.2.0-20-generic-pae i686
Actually the problem stopped after choosing always visible I don't
know if it was that witch did it, or what, but now it's working and I'm
happy
--
Bluetooth mouse stops after a while
https://bugs.launchpad.net/bugs/292030
You received this bug notification because you are a member of Ubuntu
Other open-source installed before this bug problem -- libtool,
libapr*, slite, libsqlite3-0, libsqlite3-dev, libdbd-sqlite3, ulogd-
sqlite3.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/577906
** Also affects: alsa-driver
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/795815
Title:
No sound in 11.04 with 2.6.39-3 kernel; alsa-source build fails
Public bug reported:
Binary package hint: ttf-indic-fonts
.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: ttf-indic-fonts-core 1:0.5.4ubuntu2
ProcVersionSignature: Ubuntu 2.6.32-21.31-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-21-generic i686
Architecture: i386
Date: Thu Apr 15
** Attachment added: AptOrdering.txt
http://launchpadlibrarian.net/45043443/AptOrdering.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/45043444/Dependencies.txt
** Attachment added: Df.txt
http://launchpadlibrarian.net/45043445/Df.txt
** Attachment added:
** Changed in: phpldapadmin (Ubuntu Lucid)
Status: Fix Committed = Fix Released
--
phpldapadmin: Incompatible with PHP 5.3
https://bugs.launchpad.net/bugs/551269
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I have same issue with Gnome Ubuntu 13.04 beta, but I don't need to
change background, just by switching show icons background shows back
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1115886
Title:
Confirmed, this bugs countinue for me using ubuntu 12.04, 12.10 and
yesterday with ubuntu 13.04...
This bug fixed if used kubuntu 12.04 with installed unity.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Confirmed, this bugs countinue for me using ubuntu 12.04, 12.10 and
yesterday with ubuntu 13.04...
This bug fixed if used kubuntu 12.04 with installed unity.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
So.
Whats wrong. I just try install ubuntu and grub get an error
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14
ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17
Uname: Linux 4.15.0-20-generic x86_64
ApportVersion: 2.20.9-0ubuntu7
Public bug reported:
No se ha podido calcular la actualización
Se produjo un problema irresoluble al calcular la actualización.
Esto podría deberse a:
* Paquetes de software no oficiales, no proporcionados por Ubuntu
Utilice la herramienta «ppa-purge» desde el paquete
ppa-purge para quitar
Public bug reported:
$ sudo apt update
Leyendo lista de paquetes... Hecho
E: No se pudo obtener un bloqueo /var/lib/apt/lists/lock. Lo mantiene el
proceso 7098 (jammy)
N: Tenga en cuenta que eliminar el archivo de bloqueo no es una solución y
puede dañar su sistema.
E: No se pudo bloquear el
1 - 100 of 1440 matches
Mail list logo
