?
About from the setserial output: Flags: spd_normal skip_test;
skip_test is usually set when there is a fake 16550 present; try without
this flag, and see if the uart gets tested ok., I also need more detail
on exactly what to do.
roger@roger-desktop:~$ sudo lspci -vvvk|grep IRQ 17
[sudo] password
I've now tried booting in Windoze, reset modem to default with hardware
flow control, back to Ubuntu, as well as next trying to set Minicom to
the same settings - all with no results - same as before.
I had to start Nautilus as sudo to delete the config files, and am still
unable to save a new
next trying to set Minicom to the same settings - means same settings
as worked in Windoze.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port ttyS4 doesn't work in 12.04
To
BTW - I was able to save configuration files earlier, but after the
problems started.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port ttyS4 doesn't work in 12.04
To manage
I've tried the commmand mode by +++ many times. I've tried reset in
Ubuntu, and also going to the Windoze side of this same machine where
the modem works fine, and resetting it, then going straight back to
Ubuntu and checking responses. All is still the same, no response, no
echo, no nothing in
I just looked in the BIOS for any setting for IRQ or ports. I couldn't
find any.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port ttyS4 doesn't work in 12.04
To manage
roger@roger-desktop:~$ echo '+++'/dev/ttyS4
echo ATM2L3/dev/ttyS4
echo ATD/dev/ttyS4
(no result at all, no sound, totally blank line)
More modem info
http://www.usr.com/support/product-template.asp?prod=5610c
http://www.usr.com/support/5610c/5610c-ug/index.html REFERENCE select your
choice
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port ttyS4 doesn't work in 12.04
To manage notifications about this bug go to:
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port ttyS4 doesn't work in 12.04
To manage notifications about this bug go to:
** Description changed:
[Impact]
+ Remote clients can cause the broker to crash, meaning a DoS for other
clients. The bug is caused by a double free() so no chance of buffer overrun or
other security issue.
[Fix]
+ Remove the incorrect memory free call.
[Test Case]
[Regression
portions were trundcated so I couldn't see
which one was being straced in many cases. Can you let me know how to
handle these to get you useful info?
Thanks!
roger@roger-desktop:~$ sudo uname -a
[sudo] password for roger:
Linux roger-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:42:16 UTC
How can I approach this problem? I need a working serial port.
With a fix or a work-around I can do?
Is there some kind of add-on I can use?
Is this in process to be fixed in the kernel or other segment?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
@Johann, thank you for that pointer. I had tried the official Samsung
driver earlier which has the world's worst installer and on printed to
half the page width.
Using the latest driver from bchemnet I found the following:
* Using the Samsung Configurator meant no print jobs came out and I was
Public bug reported:
Ubuntu loads normally but when another program is selected and loads
Desktop drops out.When this happens which is all the time cant type and
will not close down.
Ubuntu 12.10
** Affects: ubuntu-docs (Ubuntu)
Importance: Undecided
Status: New
--
You received
Public bug reported:
One of my projects has a directory with spaces in its name. When any of
the files in the directory are changed the window just shows the first
word from the directory name with a weird icon and none of the affected
files.
ProblemType: Bug
DistroRelease: Ubuntu 12.10
This may be related to #591670 which deals with files having spaces in
their names (my case is the containing directory).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1091561
Title:
Breaks on
The problem is not in group membership, I am a member of dialout and
dip, with many logout/logins done afterward.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port ttyS4
I think an important question at this point is : Is this problem only in
Ubuntu, or is it also in the main Linux kernel, or other distros?
Depending on this answer, help may be available to fix this problem
asap, other people besides just Ubuntu would be available.
--
You received this bug
will be shown, no matter what keyboard input, etc.
IN EFAX-GTK :
efax-0.9a: 21:27:23 opened /dev/ttyS4
( Then try to send and wait 5 minutes - no result, so press Stop )
*** Stopping send/receive session ***
efax-0.9a: 21:27:46 failed page /home/roger/Documents/Libre Office/Saddleback
Labs Request.pdf
This is baffling to me.
ALL the serial functions don't work, doesn't matter which app.
Can I list the installer for Ubuntu as a package?
If this isn't where to report Ubuntu OS bugs, PLEASE point me to the
correct place.
Google search Ubuntu Bugs gives :
Think you've found a bug?
Take a look
Also see
http://ubuntuforums.org/showthread.php?p=12345518
http://ubuntuforums.org/showthread.php?p=12391994#post12391994
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1087519
Title:
Serial port
I'm not sure why this says Fix Released - it is still happening for me
on a 12.10 Live USB + persistence set up.
In fact, I got it trying to apt-get install mdadm - so it seems possible
it occurs any time update-initramfs runs rather than just on a kernel
update.
I suppose it is possible that if
Your criticism is noted.
However, this bug is already solved, or likely solved. HP just hasn't
implemented the fix. And, there's likely no other solution aside from
using capitol letters. ;-)
It would be more helpful if you provided better information.
As such, only seems two solutions,
I have a unified Logitech mouse and keyboard. Depending on what USB
port the receiver is plugged into , I get either rare or frequent
momentary freezes on either or both. Bootup is ok, this happens almost
any time.
Ubuntu 12.04 LTS
--
You received this bug notification because you are a
THIS BUG IS STILL NOT FIXED AND APPLICATIONS ARE STILL NOT PRINTING
CORRECTLY WITH THE HPLIP INSTALLED PPD FILE!
THIS HP 1522NF PRINTER NEEDS PostScript Level 2 and NOT PostScript Level
3!!! Trying to print with Postscript Level 3 will cause character
anomolies.
--
You received this bug
... oops ... Replace CORRECTLY with INCORRECTLY!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/277404
Title:
hp laserjet postscript text print does not print some characters
To manage
the ubuntu desktop is unstable after loading,no typing can take place
and the outer edge disappears along with the desktop when another action
is selected
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I used the python fix from Mike Cook in comment #14. It works fine now.
I'm wondering if it's related to some python updates that I've received
within the last couple of weeks. I'm on Linux Mint 13 KDE which is
based on Ubuntu 12.04 (if I remember correctly).
--
You received this bug
Public bug reported:
Upgraded to 12.10 from 12.04.Various problems since,Ubuntu desktop is
now dropping out after logging in and using say firefox when go back to
desktop it does not function and machine has to be closed down manually
ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: xorg
I am using 64 bit 12.10 Precise. Previously (64 bit 12.04) I had a
similar problem which was resolved (unsure how but I suspect through
regular s/w updates). The problem has reemerged and is particularly bad
when using PDF files created with a scanner. The current problem
results in my printer
Public bug reported:
If you try to install a package that downloads a '.o' file, e.g. a
binary firmware for a wireless card, via apt-cacher-ng it fails because
the .o extension is not allowed:
sudo apt-get install firmware-b43legacy-installer b43-fwcutter
...
ERROR 403: Forbidden file type or
apport information
** Tags added: apport-collected precise
** Description changed:
If you try to install a package that downloads a '.o' file, e.g. a
binary firmware for a wireless card, via apt-cacher-ng it fails because
the .o extension is not allowed:
sudo apt-get install
Just to make sure it's clearly understood, this modem is basically an
internal sportster with it's own serial card / port at ttyS4. See
http://www.usr.com/support/product-template.asp?prod=5610c for
full details.
description: Serial controller product: 56K FaxModem Model 5610
vendor: 3Com
Thanks.
Upgrading from 12.04 t0 12.10 couldnt get program to run,after entering Ubuntu
desktop the program stops completely with a message stating Compiz has stopped
working sending a report.
Do you want to relaunch Compiz or not,
Hope that helps
--
You received this bug notification because
Public bug reported:
Further to my previous problems on 12.10 ubuntu this seems to have numerious
bugs,and getting round one leads to another
My computor is sending reports to Ubuntu as it is failing to run the program
successfully.For example it will not switch off have to do it manually.Not
minutes - no result, so press Stop )
*** Stopping send/receive session ***
efax-0.9a: 21:27:46 failed page /home/roger/Documents/Libre Office/Saddleback
Labs Request.pdf.001
I am a member of dialout and dip.
Modem info:
description: Serial controller product: 56K FaxModem Model 5610
vendor: 3Com
If I understand correctly, wvdial is a PPP intended to connect to an
ISP.
This is not the point of difficulty. The point of difficulty is the
breakdown of primary communication with the modem, well before the time
of connecting with an ISP.
The modem will simply not respond at all in minicom or
: [ 646.449954] [drm] nouveau
:01:00.0: nouveau_connector_detect:249 - DDC not detected!
Nov 7 20:07:16 Precision-M4600-JRYQKQ1 kernel: [ 646.449955]
[drm:output_poll_execute], [CONNECTOR:20:VGA-1] status updated from 2 to 2
Roger R. Cruz
--
You received this bug notification because
if you want more I am well up for a bit more sniffing,
will go very well with the stinker of a cold I got from her indoors.
regards
sniffy Dave.
I bet you already guessed that Roger is a alter ego type thingy
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
When I examined the code it actually only stores the password in the
system keyring for 60 seconds.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1022815
Title:
initramfs should try password
(release tarball is distribution/schroot-1.6.4; delta for the -2 release
is debian/schroot-1.6.4-1..debian/schroot-1.6.4-2)
Regards,
Roger
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1070008
Title
: Ubuntu 12.10
Package: alsa-base 1.0.25+dfsg-0ubuntu3
ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
Uname: Linux 3.5.0-17-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: roger
I get the following errors using efax-gtk
Socket running on port 9900
efax-0.9a: 01:37:33 failed page /home/roger/Documents/Libre Office/Saddleback
Labs Request.pdf.001
efax-0.9a: 01:37:33 finished - unrecoverable error
efax-0.9a: 01:37:33 Error: can't open serial
Public bug reported:
Pretty much every install from 11.0 through to 12.04 has returned errors
relating to Samba4. Now upgraded to 12.10 Quantal ?? and I am getting a
pantload of errors!! But mostly tthe one above. Have run apt-cache show
samba4 and since I don't use it and did not seek to
When this error ocorr normally I just reboot the machine.
Is there a way to see a log of what was running prior to my reboot (the freeze
moment)?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1071442
Public bug reported:
I couldn't determine yet what is causing the problem or how to reproduce it.
But my Dell Latitude E5430 with 12.04 just freeze from time to time (normally
once in two days).
The screen, mouse and keyboard just freeze( I can't turn the caps-lock light)
If some want me to run
Thanks.
I can reproduce this with 1.6.3. Still working out where this is
happening though.
- it's set correctly in the session file (as you've shown)
- it's also set correctly on loading (again with --config/--info, so no
serialisation errors)
So something subtle is happening after that, but
Unwanted side effect of cloning; triggered by the copy constructor
chaining up to the block_device_base ctor, which calls set_device, which
then calls chroot_facet_mountable::set_mount_device.
(gdb) run --recover-session -c snaptest
Starting program: /home/rleigh/schroot/bin/schroot/schroot
We do in fact already take steps to ensure we don't call this when using
LVM snapshots to avoid the exact issue that you've reported. However,
it looks like in your case this is not working. As you can see,
set_mount_device should be called for all chroot types /except/ lvm-
snapshot (where the
OK, so this check is failing. dynamic_cast() is returning null
because this is being called from the constructor, and the vptr during
this stage of construction does not contain the information about the
derived class. So we end up setting the mount device inappropriately.
This was working
This is now being tracked in Debian bug #691376.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1070008
Title:
schroot session recovery mounts $device, not $mount-device, for LVM
snapshots
To
http://anonscm.debian.org/gitweb/?p=buildd-
tools/schroot.git;a=commitdiff;h=02fa2aefc24e95852aa991f720b3c9dc53583d1c
Note that this patch needs backporting to the schroot-1.6 branch and
testing with all block-device-using chroot types before I would
recommend applying it. **Please do not apply
I'm not sure this is of low severity. I've marked this as serious in
the Debian bug since it could allow a user to gain unauthorised root
access to the source volume (if they were a root user for the snapshot),
and potentially result in dataloss if the user didn't realise they were
not using the
appropriate.
Thanks,
Roger
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1070008
Title:
schroot session recovery mounts $device, not $mount-device, for LVM
snapshots
To manage notifications about this bug
Ok. I will edit the post to clarify everything.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1023645
Title:
ndiswrapper-dkms 1.57-1ubuntu1: ndiswrapper kernel module failed to
build [error:
Yes, it is the same version I used to generate the module.
I don't see anything special in your make.log. It's very similar to the
one generated by my computer. There are no errors. The compilation
process looks fine, but however it doesn't seem to find the binary after
the process...
I may know
Yes, this would be the most straightforward solution.
However, I arranged it the other way (using dkms) to automatise the
process when upgrading the kernel. Wouldn't it stop working if the
Ubuntu team released, let's say, a 3.5.0-18 kernel update? Then make +
make install would be necessary for
Can you post more information about the error? Make sure that you are
using the right version of the source code. Only the dkms.conf must be
preserved.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I have several repositories including some vendor ones (eg virtualbox)
and many ppa's. If update-manager has any problem downloading any of
those non-Ubuntu provided repositories then it exits at the end. I then
have to run it a second time, abort the repository downloads
Public bug reported:
After upgrading to quantal suspend from the menu no longer works (pm-
suspend works just fine). .xsession-errors contains this relevant line:
gnome-session[2937]: libupower-glib-CRITICAL: up_client_get_can_suspend:
assertion `UP_IS_CLIENT (client)' failed
ProblemType: Bug
Happens to me too. The problem is in the ndiswrapper source, as the
problem is present also when compiling manually ndiswrapper-source.
Updating to the newer 1.58rc1 version fixes the bug. I managed to
compile it through dkms using the same dkms.conf file from 1.57-1 (only
changing the
Public bug reported:
When running update-manager -d to upgrade from precise to quantal on two
different machines I would be prompted to view the diffs between two
files. However the window that appears is not resizeable and it only
shows two lines which is completely unusable. See attached
Public bug reported:
I'm the author of apsw - https://code.google.com/p/apsw/ - and have a
PPA for builds for various Ubuntu versions at https://launchpad.net
/~ubuntu-rogerbinns/+archive/apsw/+packages
This has worked fine for a few years. However builds for Quantal are
failing. You can see
I just ran into this problem, I think. Except in my case, other
launchers would take ownership of the main Firefox profile window. My
problem was solved by adding the following line to
usr/share/applications/firefox.desktop. All my other custom firefox
profile launchers already contained this
Public bug reported:
during routine update
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: samba4 4.0.0~alpha18.dfsg1-4ubuntu2
ProcVersionSignature: Ubuntu 3.2.0-31.50-generic 3.2.28
Uname: Linux 3.2.0-31-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.0.1-0ubuntu13
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1059652
Title:
package samba4 4.0.0~alpha18.dfsg1-4ubuntu2 failed to install/upgrade:
subprocess installed post-installation script returned error
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1057536
Title:
package samba4 4.0.0~alpha18.dfsg1-4ubuntu2 failed to install/upgrade:
subprocess installed post-installation script returned error
Public bug reported:
samba4:
Installed: 4.0.0~alpha18.dfsg1-4ubuntu2
Candidate: 4.0.0~alpha18.dfsg1-4ubuntu2
Version table:
*** 4.0.0~alpha18.dfsg1-4ubuntu2 0
500 http://mirrors.mit.edu/ubuntu/ precise/universe i386 Packages
100 /var/lib/dpkg/status
refuses to install
I've not yet seen any evidence that the underlying LVM issues have been
fixed, so I am not fully convinced that this is yet resolved.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/753541
Title:
lvm
Public bug reported:
during routine updates
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: samba4 4.0.0~alpha18.dfsg1-4ubuntu2
ProcVersionSignature: Ubuntu 3.2.0-30.48-generic 3.2.27
Uname: Linux 3.2.0-30-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.0.1-0ubuntu13
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1050928
Title:
package samba4 4.0.0~alpha18.dfsg1-4ubuntu2 failed to install/upgrade:
subprocess installed post-installation script returned error
Public bug reported:
during update process
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: samba4 4.0.0~alpha18.dfsg1-4ubuntu2
ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24
Uname: Linux 3.2.0-29-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.0.1-0ubuntu12
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1045397
Title:
package samba4 4.0.0~alpha18.dfsg1-4ubuntu2 failed to install/upgrade:
subprocess installed post-installation script returned error
I tried the solution in the post linked by htrex, and it works perfectly
for me! (64 bit Ubuntu) :D
It really is only a matter of adding some text at the end of the 4th
line in the file /etc/X11/Xsession.d/10fglrx
The text is:
32 bit systems -- :/usr/lib32/dri/
64 bit systems --
Has someone digged into solving this bug?
With a fresh 12.04.1 install + post-release version of fglrx this bug
affects me as well. I haven't tried the workaround/solution posted by
htrex yet, but I assume that these problems should not be tolerated on
an LTS that has been released for months
Another short term fix (in case there are any other library packages that also
install to that directory):
sudo -s
echo /usr/lib/i486-linux-gnu /etc/ld.so.conf.d/librtmp0.conf
ldconfig
exit
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Changed in: cryptsetup (Ubuntu)
Status: Invalid = New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1022815
Title:
initramfs should try password against other devices
To manage
I'm trying that, and especially need to verify it will work from
initramfs as my root is encrypted. Ironically it stores the passphrase
in the kernel forever, whereas something that temporarily stores the
passphrase while the initramfs is running would have it available for
considerably less
It turns out that the script is already in the right place and all the
initramfs hooks are in place etc. It is merely necessary to add
keyscript=decrypt_keyctl into the relevant places in crypttab.
Unfortunately doing so causes update-initramfs to fail with the
cryptkeyctl hook giving error code
Ok, more progress. keyctl must be installed otherwise update-initramfs
fails and you have to guess why.
And with everything plumbed in, I can't actually enter my passphrase and
the machine is unusable. The reason is decrypt_keyctl is not using
whatever means is correct for prompting for the
I got everything working. The README you pointed to is very misleading
since the script is already in the correct place. I'd be inclined to
just delete the README, and mention all the different scripts in
/lib/cryptsetup/scripts in the main crypttab page.
decrypt_keyctl doesn't seem like 'none'
** Changed in: mosquitto
Status: Fix Committed = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1035328
Title:
Problem with last will message containing 0x00 bytes
To manage
** Changed in: mosquitto
Status: Fix Committed = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/972389
Title:
Mosquitto crashes using bad version of protocol
To manage
This has now been fixed:
https://bitbucket.org/oojah/mosquitto/changeset/2272f88cf9e117b0b44ce819f22cc14191ab6f90
It'd be great if you could confirm that it works for you (use
https://bitbucket.org/oojah/mosquitto/get/0.16.bz2 ).
Thanks again.
** Also affects: mosquitto (Ubuntu)
Importance:
All I can say is that I did a reinstall of Kubuntu 12.04 (precise) and
the problem went a way.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1003858
Title:
foxtrotgps starts then disappears almost
Logitech Mouse Not Found in Ubuntu Bootup
Please read below the -- line first, then the problem.
When I try to run the CD as a test (downloaded today, 8/7/12, can't
check details, the #$^%* mouse isn't working), the mouse is not found.
The keyboard works fine. The mouse cursor only appears
I tried rebooting from the live CD while constantly moving the mouse.
That made a difference, but just barely. The mouse movement is slow and
jerky, next to useless. Almost like trying to help a fall-down drunk
take a walk. It took me about 5 minutes just to get logged out.
--
You received
** Also affects: mosquitto (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/972389
Title:
Mosquitto crashes using bad version of protocol
To
The real bottom line is - When will a fix be present in the download
disk file ?!?!?!?
It seems that there are at least two possibles (54 and 56 above). There
may be others.
Until then, myself and many others have a severe problem with Ubuntu,
and most will walk away. Do we really want that?
OOPS...
Another important point I meant to include above... How will the
common Ubuntur know when the fix is done, except to download a disk
every day or so and try it...?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
computer Toshiba satellite m645
running on 10.04lts
2.6.32-41-generic
microphone does not work inside or out.
** Affects: alsa-driver (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I have eclipse 3.7.2. Removed .eclipse directory. Get the same error
message:
!SESSION 2012-07-27 11:37:23.523 ---
eclipse.buildId=I20110613-1736
java.version=1.7.0_05
java.vendor=Oracle Corporation
BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk,
If you create a text file in /etc/profile.d folder and call it something
like my_environment.sh you can put you personalized environment
variables in it and it will be run each time you login to your desktop
environment. Whatever you decide to name it be sure it's file extension
is .sh so that it
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1027632
Title:
playing a list of wav files; after some repetitions crashes; both
times in the same 1763ls.wav
To manage notifications about this bug
-generic-pae 3.2.19
Uname: Linux 3.2.0-26-generic-pae i686
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu11
Architecture: i386
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: roger 1836 F
*** This bug is a duplicate of bug 880881 ***
https://bugs.launchpad.net/bugs/880881
Public bug reported:
My laptop has two batteries (Lenovo Thinkpad) with the main one and a
second one instead of the DVD drive. This indicator correctly knows
that there are two batteries - clicking on it
*** This bug is a duplicate of bug 880881 ***
https://bugs.launchpad.net/bugs/880881
** This bug has been marked a duplicate of bug 880881
Power indicator does not combine multiple battery status
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Tried to install Ubuntu 12.04 on a Dell D800 laptop using the mini iso.
After selected Install from installer boot menu installation failed
with error message This kernel rquires the following features not
present on the CPU: pae. Tried twice with two different copies of the
My files are still being generated by this bug,the only clue I have
noticed is when I delete other files they reappear as if they haven't
been deleted
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thanks for the follow up, but I had to give up on Ubuntu years ago!! I
could never get the help when needed ... case in point.
Regards/Roger, in Bangkok
On Fri, Jul 13, 2012 at 3:16 AM, Daniel Manrique
daniel.manri...@canonical.com wrote:
Thank you for taking the time to report this bug
701 - 800 of 2231 matches
Mail list logo
