not really lucky, 11 or 12GB also works
mastier@drakkar:~$ lxc config device override esa-vpn root size=15GiB
Device root overridden for esa-vpn
that's kinda solution here :-)
Yet maybe we could add this hint here in the error message.
--
You received this bug notification because you are a
Public bug reported:
Hi, I encounter issue when I manually override the disk size. I got real
ZFS backed pool
The snap version is 5.0.3 from 5.0/stable channel
$ snap info lxd |grep install
installed: 5.0.3-babaaf8 (27948) 91MB -
When specify 24GB it's ok
Public bug reported:
When using camera I got often freezes of the camera input which are fixed after
a while (2-3min) when having the videoconference with Google Meet.
But sometimes it crashes the whole bus and all usb devices are disconnected.
[25678.046793] usb 2-9.1: current rate 16000 is
Attached full log
** Attachment added: "cis-l1.log"
https://bugs.launchpad.net/ubuntu/+source/openscap/+bug/2056775/+attachment/5754838/+files/cis-l1.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
The HTML report seems ok, not info there on the issues
** Attachment added: "usg-report-20240311.1551.html"
https://bugs.launchpad.net/ubuntu/+source/openscap/+bug/2056775/+attachment/5754839/+files/usg-report-20240311.1551.html
** Description changed:
Hi,
We had a lot of issue when
Public bug reported:
Hi,
We had a lot of issue when hardening with CIS level 1 server on
Openstack hyperconverged node (with ceph).
So I tried to do the audit on clean Jammy. I also received a lot of
errors (but this time not fatal) like
root@cis-test:~# usg audit --tailoring-file
I've upgraded recently environment to latest stable/victoria build, and I am
not able to boot from rbd volume - actually cinder cannot fetch flance images
from RBD - it worked on train and ussuri. Ceph is Pacific (16.2.6) -
https://paste.opendev.org/raw/809512/
Looks like related to this one
can we make a release os-vif for Victoria? 2.2.1? this bug is quite
critical
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1892132
Title:
Failure to get the correct UpLink Representor
To manage
Only attempt that was successful was when I did not use lVM and set up
everything on single drive.
I got drives from retailer, sealed in hard plastic so I doubt anyone
except factory had their hands on them. Second pair( HDDs ) I got sealed
by vendor with his sticker on it. Those two have WWN
Should have been: * while parted does show it as well.
Out of curiosity, I gave a go to fedora server and it seems to work(
with one minor detail when it comes to partitioning).
Im going to alter title, as it is wrong.
General flaw seems to be LVM mixing drives/CC partition table onto another:
During installation version was bumped to 21.04.xx( as per dialog
suggestion): AFAIR.
** Description changed:
- I've already sent crash report from installer, but since I'm not quite
- sure how it's handled, might as well follow up with this.
+ #I've already sent crash report from installer, but
Possibly original tittle might be wrong. Ive reset physical connections and
BIOS, but could not reproduce ID switch. I might just have been tired and
imagined it. Nevertheless, installation still fail.
Through trial and error one thing is clear - plain HDD install( no LVM/Crypto)
does work like
Im thinkering with ubuntu server 20.10 from live USB.
I tried single drive install and it worked. Once it went live I tried minimal
setup on two SSDs( /boot, /boot/efi and encrypted LVM with rest on both). Not
sure if its relevant but I can see in crash report:
"adding partition 'partition-3'
Upon further investigation - it might be connected to BIOS screwing up
order. Part of installer see wrong order, but scripts most likely see it
differently?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Please attach the output from the simple-scan after enabling
"SANE_DEBUG_DLL=255"
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1921794
Title:
connection to scanner very slow
To manage
Please open terminal and set following variable:
export SANE_DEBUG_DLL=255
Then run simple-scan with command:
simple-scan
The output should be similar to:
https://gitlab.gnome.org/GNOME/simple-scan/-/tree/master
You could investigate which backend is taking so long from logs.
You
(Ubuntu)
Status: New => Confirmed
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang65)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1921532
Could you please paste the screenshot with the list of scanners which
are available to choose?
Is it is:
* HP OfficeJet_4650_series
* HP OfficeJet 4650 series [A67ED8] SSL
* OfficeJet 4650 series [TH7B64F03Z0662]
* HP OfficeJet 4650 series [A67ED8]
?
--
You received this bug notification
Thanks for bug report.
COuld you please run the simple-scan with debug mode (`simple-scan -d`) and
reproduce the issue.
Then attach the logs to the bug report.
Unfortunately attached `SimpleScanLog.txt` file is not enough.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
** Also affects: sane-backends (Ubuntu)
Importance: Undecided
Status: New
** Changed in: simple-scan (Ubuntu)
Status: Triaged => Invalid
** Also affects: sane-backends via
https://gitlab.com/sane-project/backends/-/issues/271
Importance: Unknown
Status: Unknown
--
Please run simple scan in debug mode with command:
simple-scan -d
reproduce the issue, and attach file with output.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Try to decrease resolution or paper size, and check if it helps
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1912952
Title:
simple-scan SANE_STATUS_NO_MEM
To manage notifications about this bug
Please try to scan with hpaio Sane backend. It should help.
The escl Sane backend, which you are currently using, is buggy and most of
issue was resolved with next Sane version.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because
Does this issue exists also with "xsane" application.
Please open terminal, run application with command "simple-scan -d",
scan single page, save output from terminal to file and attach such file
to this ticket.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You
Generally it is not simple-scan issue. The isse do not exists in Ubuntu 21.04,
because the Sane "
"escl" backends were improved.
Could you please attach logs from simple-scan and Ubuntu 21.04?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Generally you have two scanner backends:
* "escl:http://127.0.0.1:60001; vendor="HP" model="DeskJet 2600 series [665032]
(USB 1)"
* "hpaio:/usb/DeskJet_2600_series?serial=CN0569B27006PS"
vendor="Hewlett-Packard" model="DeskJet_2600_series"
The first is not working correctly.
Could you please
Please try to change Paper Size and decrease DPI in application
settings.
Try also rename /home/corrado/.cache/simple-scan directory.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1907121
Title:
It seems that the issue is with error:
Failed to delete autosaves: Error opening directory
â/home/corrado/.cache/simple-scan/autosavesâ: No such file or
directory
Could you please try to compress /home/corrado/.cache/simple-scan
directory and attach it to bug report?
--
You received this
Please try to run application in debug mode, and attach the logs:
$ simple-scan -d
Please try to build the latest version according to instruction:
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/master/README.md
#building-from-source
and check if the issue is existing in latest version.
I'm an Simple-scan developer:
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/master/simple-scan.doap#L27
Can I have access to these bug reports?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Summary changed:
- Update simple-scan in Ubuntu 20.04 to 3.36.6 (fixes cannot scan a page using
EPSON V39 scanner)
+ Update simple-scan in Ubuntu 20.04 to 3.36.7 (fixes cannot scan a page using
EPSON V39 scanner)
** Description changed:
[ Description ]
GNOME upstream have released a
It will also fix bug:
https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/1881753
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896842
Title:
Update simple-scan in Ubuntu 20.04 to 3.36.6
** Changed in: simple-scan (Ubuntu)
Status: Confirmed => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1881753
Title:
Cannot scan in Photo mode with Brother MFC L3770 CDW
To
It would be great if you would able to compile previous working Sane version,
and bisect when the issue starts appearing.
More information about git bisect is available at:
https://www.metaltoad.com/blog/beginners-guide-git-bisect-process-elimination
--
You received this bug notification
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: Confirmed => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897992
Title:
No VGA video signal after installing pkg
Please attach your Xorg.0.log file after successfully running Openchrome
driver.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897992
Title:
No VGA video signal after installing pkg and rebooting
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897992
Title:
No VGA video signal after installing pkg
Please attach /var/log/Xorg.0.log after you X.org with Openchrome. It
will be very useful.
Please try to contact with Kevin Brace directly:
He is the maintainer of Openchrome driver.
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: New => Incomplete
--
You received this
More information about OpenChrome driver is available at:
https://github.com/freedesktop/openchrome-xf86-video-openchrome
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897992
Title:
No VGA video
The issue was fixed in simple-scan 3.36.6
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/gnome-3-36/NEWS
** Bug watch added: gitlab.gnome.org/GNOME/simple-scan/-/issues #90
https://gitlab.gnome.org/GNOME/simple-scan/-/issues/90
** Also affects: simple-scan via
I had similar problem with LinkHub HUB40 and Gentoo kernel 5.8.7-gentoo,
wpa_supplicant 2.9 and "Intel Corporation Dual Band Wireless-AC 3168NGW
(iwlwifi)". Authentication was ok, but association always timed out.
Association with other routers was ok and it was working fine before
with LinkHub
Thanks! It will be great to also backport it to Xenial.
So following workaroun would no be needed:
https://kitson-consulting.co.uk/blog/ubuntu-brother-printer-scanner-network-setup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
please close this bug, as it creates unnecessary confusion ;)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1834045
Title:
Live-migration double binding doesn't work with OVN
To manage
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang65)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1888238
Title:
Ubuntu 20.04 simple-scan brightn
://pl.archive.ubuntu.com/ubuntu focal/main amd64 Packages
It is working perfectly fine for me. Tested with HP Laser MFP 135a
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang65)
** Tags removed: verification-needed verification-needed-focal
** Tags added: verificat
Please run application with command:
`simple-scan -d`
and attach the output.
It seems that it is duplication of the upstream issue:
https://gitlab.gnome.org/GNOME/simple-scan/-/issues/185
** Bug watch added: gitlab.gnome.org/GNOME/simple-scan/-/issues #185
The code responsible for encoding pdf is available here:
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/master/src/book.vala#L348
It is comparing jpeg with zlib:
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/master/src/book.vala#L479
How would you like to change it?
What do you think
** Bug watch added: gitlab.gnome.org/GNOME/simple-scan/-/issues #134
https://gitlab.gnome.org/GNOME/simple-scan/-/issues/134
** Also affects: simple-scan via
https://gitlab.gnome.org/GNOME/simple-scan/-/issues/134
Importance: Unknown
Status: Unknown
--
You received this bug
** Changed in: simple-scan (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1881753
Title:
Cannot scan in Photo mode with Brother MFC L3770 CDW
To manage
I found schematic for Lenovo Y700 15 ISK and make some investigation.
Ubuntu detects ALC233 as audio chip.
Schematic shows that my mother board got installed the ALC3248 one.
On schematic ALC3248 MONO_OUT and MONO_MUTE pins are connected to audio amp
which drives subwoofer.
The problem is
It looks like the most of Italian translation strings were translated:
https://l10n.gnome.org/vertimus/simple-scan/master/po/it/
Could you please double check if 3.36.2.1 version were properly translated:
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/master/po/it.po
?
I think Simple-Scan
** Bug watch added: gitlab.com/sane-project/backends/-/issues #271
https://gitlab.com/sane-project/backends/-/issues/271
** Also affects: sane-backends via
https://gitlab.com/sane-project/backends/-/issues/271
Importance: Unknown
Status: Unknown
--
You received this bug
*** This bug is a duplicate of bug 1868408 ***
https://bugs.launchpad.net/bugs/1868408
Thanks Miguel for bug report.
Could you please run simple-scan with debuging, by opening terminal and
running:
simple-scan -d
and reproduce issue by scanning one page with changed brighness and
** Also affects: sane-backends via
https://gitlab.com/sane-project/backends/-/issues/278
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1759889
Title:
I have the similar issues with USB detection after upgrade to Ubuntu 20.04 on
my scanners (HP Laser MFP 135a - smfp backend and HP OfficeJet 4630 - hpaio
backend).
WIth
The hpaio scanner is detected on USB, but it is not able to communicate
(xsane, scanimage, simple-scan). Only scanning by
I'm Simple-scan developer.
I have an two scanners (HP Laser MFP 135a - hpaio backend and HP 4630 - smfd
backend).
After upgrade from Ubuntu 18.04 to Ubuntu 20.04, both scanners stops working on
simple-scan, xsane and scanimage.
I think it is some issue with provileges/sane, but not directly to
It seems that the issue is connected with Sane backend (pixma).
Please check on bug list, if the issue was already reported:
https://gitlab.com/sane-project/backends/-/issues
You could also report the issue to mailing list:
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel
--
I checked on Sane supported drivers, and your device is well supported
(pixma backend):
http://www.sane-project.org/sane-backends.html#S-PIXMA
"i-SENSYS MF240 Series Flatbed and ADF scan. All resolutions supported
(up to 600DPI, ADF up to 300DPI). 216mm image width buggy, restricted to
215mm."
Please try the HPLIP driver. It should be resolved with this driver.
** Changed in: simple-scan (Ubuntu)
Status: Triaged => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1619868
Please run command:
export SANE_DEBUG_DLL=255
and then:
simple-scan -d
and provide the output from it.
** Changed in: simple-scan (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1864315
Title:
applet crashes on execution, needs brutal choke to end
To manage
Please attach debug logs from simple-scan after scanning
** Changed in: simple-scan (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1721674
Title:
Scan All
** Changed in: simple-scan (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709890
Title:
Simple Scan Ignores Back or Front & Back Selections Fujitsu ScanSnap
** Changed in: simple-scan (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1714636
Title:
simple-scan does not communicate with scanner, also it is found with
** Changed in: simple-scan (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1398151
Title:
Clicking the "Text"/"Photo" items in the toolbar doesn't
Please provide full debug logs from simple-scanner
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1759889
Title:
Simple scan
** Changed in: simple-scan (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1811593
Title:
jpeg compression slider on save
To manage notifications about this
Please attach debug logs from simple scanner.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1823339
Title:
Ubuntu 19.04: Simple
** Changed in: simple-scan (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1869524
Title:
Simple Scan doesn't load
To manage notifications about this
** Changed in: simple-scan (Ubuntu)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1840185
Title:
simple-scan app closes with a big delay
To manage
Sound is back on -46 on my X1C 7th gen. Thanks for the fix!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1867803
Title:
ALSA: No soundcards found after updating kernel to 5.3.0.42.36
To manage
Hi!
Sound still not working on -45, confirmed working on -40. Running Ubuntu
18.04.4 on Lenovo X1C 7th gen (just like
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1868165).
cheers
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Hi Charles.
I suspect that you have old schema in directory:
/usr/local/share
Please try to rename `/usr/local/share` directory to `/usr/local/share-
back` and check if it helps
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
.so.1
(0x7f0e1510)
libcolord.so.2 => /usr/lib/x86_64-linux-gnu/libcolord.so.2
(0x7f0e14ee)
...
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang
Please build Simple Scan according to instruction and check if the issue
is also present with latest version:
https://gitlab.gnome.org/GNOME/simple-scan/-/blob/master/README.md
#building-from-source
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Now I see the root cause of problem:
https://www.fujitsu.com/pl/products/computing/peripheral/scanners/scansnap/ix500/
Your scanner doesn't have FlatBed.
To workaround it you could use ADF feeder.
** Changed in: simple-scan (Ubuntu)
Status: Invalid => New
--
You received this bug
The Front, Back and Duplex are working only in ADF mode.
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
** Changed in: simple-scan (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Please reopen this bug report if it is not working for you.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709890
Title:
Simple Scan Ignores Back or Front & Back Selections Fujitsu ScanSnap
iX500
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang65)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709890
Title:
Simple Scan Ignores Back or Front &am
.
** Changed in: simple-scan (Ubuntu)
Status: New => Fix Committed
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang65)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
130
** Changed in: simple-scan (Ubuntu)
Assignee: (unassigned) => Bartosz Kosiorek (gang65)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1788378
Title:
simple scan scans but cannot print
To
@leszek-dubiel
Your issue with Epson backends was resolved two days ago in ticket:
https://gitlab.gnome.org/GNOME/simple-scan/issues/106
Could you please build Simple Scan from source code (latest version), according
to instruction:
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1577315
Title:
Simple Scan & Xsane Scan not working
To manage notifications about
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1730061
Title:
before new version good now bad
To manage notifications about this
*** This bug is a duplicate of bug 1327801 ***
https://bugs.launchpad.net/bugs/1327801
What kind of scanner are you using?
** This bug has been marked a duplicate of bug 1327801
Bightness and contrast settings have no effect
--
You received this bug notification because you are a member
*** This bug is a duplicate of bug 1327801 ***
https://bugs.launchpad.net/bugs/1327801
Could you please run simple-scan with command:
$ simple-scan --debug
and paste the output?
** Changed in: simple-scan (Ubuntu)
Status: New => Incomplete
--
You received this bug notification
After a long and fruitless digging around systemd unit and seed.loaded I
have removed (purged) and installed snapd package and it fixed this
issue for me.
Something along the lines of:
$ sudo apt purge snapd
$ sudo apt install snapd
$ sudo snap install core
--
You received this bug notification
'systemd-analyze blame' suggests to run 'systemctl list-jobs', this is
its output:
JOB UNIT TYPE STATE
148 snapd.autoimport.service start waiting
89 systemd-update-utmp-runlevel.service start waiting
2 multi-user.targetstart
Is there any progress in the topic? Maybe we should set a bounty for a
fix?
Anyone else wants to pay for a fix? Maybe someone will attend to this
that way.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thank you @brian-murray for change - I wasn't sure which package will be
best.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1804877
Title:
Ubuntu Server 18 installer don't see GPT partitions
To
Public bug reported:
Ubuntu Server 18.04 and 18.10 installer don't see existing GPT
partitions. It tries to use ALL disk block device for own installation.
Of course, fdisk/parted see this partitions when I switch to another
terminal.
** Affects: ubuntu
Importance: Undecided
After install unity-settings-daemon from proposed on Ubuntu Bionic with Dell
Latitude E6430, brightness is working correctly.
Verification done.
** Tags removed: verification-needed-bionic
** Tags added: verification-done-bionic
--
You received this bug notification because you are a member of
After upgrade package from proposed, the plugin list are appearing.
Verification done.
** Attachment added: "Zrzut ekranu z 2018-10-14 22-17-18.png"
https://bugs.launchpad.net/ubuntu/+source/gnome-games-app/+bug/1787780/+attachment/5200921/+files/Zrzut%20ekranu%20z%202018-10-14%2022-17-18.png
After install from proposed, the resolution of the mines icon is much better
now (see attachment).
Verification complete successfully.
** Attachment added: "Zrzut ekranu z 2018-10-14 21-56-42.png"
Thank you so much
sudo apt-get install --reinstall hplip hplip-data
sudo apt-get install --reinstall python3
Updates work
Printer works too
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1779237
I found following instruction how to enable lowgfx mode :
https://www.google.pl/amp/www.omgubuntu.co.uk/2016/11/enable-low-graphics-mode-unity-7-ubuntu/amp
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Just a note, I have the same problem with Intel® Wireless-AC 3168
(firmware version 29.541020.0 op_mode iwlmvm) on Gentoo
linux-4.14.8-gentoo-r1 in AP mode (802.11n).
Sometimes kernel only shows warnings from
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1363:
-
case
** Changed in: netbook-remix
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/665460
Title:
[Needs r921] [VX800] White screen after installing drivers
To manage
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/434177
Title:
[K8M800]cant setup 1024x800 screen no VGA
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/388456
Title:
[PM800] When running applications in full
1 - 100 of 2045 matches
Mail list logo
