[Bug 1680553] Re: cpufreqd/loadcpufreq fails in trusty

Customer posted their debug output: We get an error during: root@plxtil03:~# /etc/init.d/loadcpufreq start * Loading cpufreq kernel modules... [fail] ​Here’s debug output when starting loadcpufreq:

[Bug 1680553] Re: cpufreqd/loadcpufreq fails in trusty

AT customer posted their debug output: We get an error during: root@plxtil03:~# /etc/init.d/loadcpufreq start * Loading cpufreq kernel modules... [fail] ​Here’s debug output when starting

[Bug 1680553] [NEW] cpufreqd/loadcpufreq fails in trusty

Public bug reported: Install 14.04.5 hwe-t on a node using maas, then install cpufreqd and cpufrequtils. Then run sudo /etc/init.d/loadcpufreq start . Fails to start. This happens on an AT system, I will post his output shortly. I get a similar failure on my system . ProblemType: Bug

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Tim, good news, the upgraded machine returns the right number: ubuntu@good-hawk:~$ cat /proc/cpuinfo | grep 'processor' | wc -l 272 ubuntu@good-hawk:~$ Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz -- You received this bug notification because you are a

[Bug 1640547] Re: stress-ng based disk tests failing

** Attachment added: "submission_2017-02-01T15.41.41.527613.tar.xz" https://bugs.launchpad.net/ubuntu/+source/plainbox-provider-checkbox/+bug/1640547/+attachment/4811956/+files/submission_2017-02-01T15.41.41.527613.tar.xz -- You received this bug notification because you are a member of

[Bug 1640547] Re: stress-ng based disk tests failing

Got some different errors this time, attaching the test output. ubuntu@ubuntu-DSS1500:~/good-hawk$ cat stress-ng.txt Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Hi Tim, I have the C6320P back and running. Do you hae a new 4.9 kernel to try, or should I apply the same one above? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087 Title: Yakkety

[Bug 1571798] Re: Broadwell ECRC Support missing in Ubuntu

Bjorn Helgaas, have you looked at the ACPI dump? Any suggestions on how to proceed? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1571798 Title: Broadwell ECRC Support missing in Ubuntu To

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Hi Tim, I'm sure I loaded the right kernel. Unfortunately I've lost access to the machine, when I can find another I will update this bug. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087

[Bug 1651851] [NEW] [190247-S5B|]Not all the NVMe can be detected when install Ubuntu 16.04 / 16.04.1 with system connected 12x NVMe

Public bug reported: 1. Setup system w/ NVMe full install 2. Boot from PXE and install Ubuntu 16.04 3. Check the NVMe detected at partition disk selection list. 4. Not all the NVMe can be detected , and system cannot finished the installation. 5. Pls refer to attachment only 3x NVMe

[Bug 1650032] Re: [189162-S5B]System received Call trace and NMI watchdog when boot into Ubuntu 16.04 and system will hang up soon.

** Attachment added: "Ubuntu_idle.jpg" https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1650032/+attachment/4791767/+files/Ubuntu_idle.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1650032] [NEW] [189162-S5B]System received Call trace and NMI watchdog when boot into Ubuntu 16.04 and system will hang up soon.

Public bug reported: Steps to reproduce the problem == 1. Install Ubuntu 16.04 on the toshiba device (M.2 pcie-ssd). 2. Boot to Ubuntu 16.04 and used command :dmesg (have Call trace) 3. And system will showed NMI watchdog and be hang up soon. The system config:

[Bug 1650032] Re: [189162-S5B]System received Call trace and NMI watchdog when boot into Ubuntu 16.04 and system will hang up soon.

** Attachment added: "Ubuntu_idle2.jpg" https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1650032/+attachment/4791769/+files/Ubuntu_idle2.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1650032] Re: [189162-S5B]System received Call trace and NMI watchdog when boot into Ubuntu 16.04 and system will hang up soon.

** Attachment added: "F2_1_Ubuntu_scheduling.jpg" https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1650032/+attachment/4791768/+files/F2_1_Ubuntu_scheduling.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1650030] [NEW] [189212-S5B]System cannot install Ubuntu 16.04 on this cfg#F2_1 , will hang up soon at partition disk selection list. Edit

Public bug reported: [189212-S5B]System cannot install Ubuntu 16.04 on this cfg#F2_1 , will hang up soon at partition disk selection list. Steps to reproduce the problem 1. Setup system w/ NVMe full install 2. Boot from PXE and install Ubuntu 16.04 on P3700 pcie-ssd 3. Idle for a while when

[Bug 1648388] Re: Install Ubuntu16.04 in RAID1 created by Intel RSTe and the system hangs while rebooting

** Project changed: magnum => linux (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1648388 Title: Install Ubuntu16.04 in RAID1 created by Intel RSTe and the system hangs while rebooting

Re: [Bug 1640547] Re: stress-ng based disk tests failing

Mike, will this fix the stress-related errors I'm seeing in Xeon Phi on Dell C6320p? https://certification.canonical.com/hardware/201611-25216/ Thanks, Mark Wenning Technical Partner Manager, Cloud Alliances Canonical, Ltd mark.wenn...@canonical.com - "We will encourage you to develop the

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Tim, it came up OK with the new kernel, no segfaults that I see. cat /proc/cpuinfo | grep 'cpu id' | wc -l returns 256 . -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087 Title: Yakkety

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Ok Tim, looks like it's back up. What do you want to see? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087 Title: Yakkety failures on Xeon Phi (Dell Poweredge C6320p) To manage

Re: [Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Ok Tim, tryng it now. How is this different than the one Joe set up in the bug? Mark Wenning Technical Partner Manager, Cloud Alliances Canonical, Ltd mark.wenn...@canonical.com - "We will encourage you to develop the three great virtues of a programmer: laziness, impatience, and hubris." --

[Bug 1646277] [NEW] Xenial desktop 16.04.x will have a black screen after PXE installation

Public bug reported: The display will keep black screen after install 16.04.x via PXE(need use "Ctrl+Alt+F1" to change to terminal 1, then can see text mode screen) Quanta team is installing Xenial desktop using PXE boot. After the installation, the console will show a black screen.

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Sure Tim, let me know when it's done building and a link to get to it. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087 Title: Yakkety failures on Xeon Phi (Dell Poweredge C6320p) To manage

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Tried with Joe's kernel above: ubuntu@brief-badger:~$ uname -a Linux brief-badger 4.9.0-040900rc6-generic #201611201731 SMP Sun Nov 20 22:33:21 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux ** Attachment added: "c6320p_info_kernel_4.9-rc6.tgz"

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Xiong, the BIOS level on the machine is 1.0.0 . Where would I get the latest BIOS? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087 Title: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Joseph, This is a pretty new machine, as far as I know it's been tested with Xenial and Yakkety. I will try to run the test kernel next week when I get back. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Got the following when I tried to run apport-collect: ubuntu@brief-badger:~$ apport-collect 1643087 The authorization page: (https://launchpad.net/+authorize-token?oauth_token=0h42c3flxcPFlcTk6RqB_permission=DESKTOP_INTEGRATION) should be opening in your browser. Use your browser to authorize

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

** Attachment added: "lspci-vnvn.log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1643087/+attachment/4779652/+files/lspci-vnvn.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1643087

[Bug 1643087] Re: Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Tar file with all the logs: C6320p_info: total 892 drwxrwxr-x 2 mwenning mwenning 4096 Nov 18 17:09 ./ drwxr-xr-x 102 mwenning mwenning 12288 Nov 18 17:24 ../ -rw-r--r-- 1 mwenning mwenning 5321 Nov 18 17:09 alternatives.log -rw-r- 1 mwenning mwenning490 Nov 18 17:09 apport.log

[Bug 1643087] [NEW] Yakkety failures on Xeon Phi (Dell Poweredge C6320p)

Public bug reported: Dell Poweredge C6320p machine with Intel Xeon Phi processor, running certification tests. I see 2 segfaults in the logs, there are more errors in the cert tests which I will post later. Linux brief-badger 4.8.0-27-generic #29-Ubuntu SMP Thu Oct 20 21:03:13 UTC 2016

[Bug 1638753] Re: 185175_[F06G]System dmesg and messages will occur some abnormall messages after install Ubuntu14.04.2 with OCE14102-UM PCIe card.

This is a similar issue to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1491654 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1638753 Title: 185175_[F06G]System dmesg and messages will

[Bug 1638753] Re: 185175_[F06G]System dmesg and messages will occur some abnormall messages after install Ubuntu14.04.2 with OCE14102-UM PCIe card.

** Attachment added: "sosreport.7z" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1638753/+attachment/4771466/+files/sosreport.7z -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1638753

[Bug 1638753] [NEW] 185175_[F06G]System dmesg and messages will occur some abnormall messages after install Ubuntu14.04.2 with OCE14102-UM PCIe card.

Public bug reported: Steps to reproduce the problem == 1. Plug-in PCIe card OCE14102-UM. 2. Install Ubuntu14.04.2 UEFI mode by PXE. 3. After OS installation finished, use WhiteList tool to check if there has error messages or not. Please help clarify below error

[Bug 1606940] Re: A a single PCI read or write appears twice on the PCIe bus. This happens when using the SR-IOV feature with some PCI devices

This bug can be marked as resolved. From: "Panicker, Manojkumar" To: Bug 1606940 <1606...@bugs.launchpad.net> Cc: Date: Mon, 17 Oct 2016 04:50:08 + Subject: RE: [Bug 1606940] Re: A a single PCI read or write appears twice on the PCIe bus. This happens when

[Bug 1592571] [NEW] lshw B.02.17 is missing system information

Public bug reported: Systems: multiple, example below is on Ubuntu Wily. This also happens on Xenial. $ lsb_release -rd Description:Ubuntu 15.10 Release:15.10 $ Trusty uses lshw B.02.16 and does not see this bug. lshw facility does not report all the system information in the

[Bug 1571798] Re: Broadwell ECRC Support missing in Ubuntu

Fantastic, thanks John. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1571798 Title: Broadwell ECRC Support missing in Ubuntu To manage notifications about this bug go to:

[Bug 1571798] Re: Broadwell ECRC Support missing in Ubuntu

Thanks John, Can you test some earlier versions of Ubuntu 14.04 and see if you have the same problem? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1571798 Title: Broadwell ECRC Support missing in

[Bug 1571798] [NEW] Broadwell ECRC Support missing in Ubuntu

Public bug reported: Here is the problem statement from the Dell team: When booting into Ubuntu 14.04.4 with a Broadwell CPU and an Intel Quick Assist Card, the memory location that corresponds to ECRC is set to 0x01e0, when the BIOS is setting this location 0x00a0 pre-OS boot. This causes the

[Bug 1518095] [NEW] lshw reports "Bus Error" or nothing on arm7l machine

Public bug reported: lshw reports "Bus Error" or nothing when run on an arm7 machine ISEE IGEPv2 board: OMAP 3520 (ARM Cortex A-8) SDRAM 512 MB Flash 512 MB Ubuntu 12.05.5 LTS - ( log in) Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 2.6.37 armv7l) * Documentation: https://help.ubuntu.com/

[Bug 1423343] Re: [Hyper-V][ubuntu 15.04] various upstream patches for hyper-v

Marked Invalid, Josh will submit in a set of different bug(s) ** Changed in: linux (Ubuntu) Status: Triaged => Invalid ** Changed in: linux (Ubuntu Vivid) Status: Triaged => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed

[Bug 1490545] Re: [Hyper-V] lis daemons not active after install on Ubuntu 15.10 Wily Werewolf

Considered fixed, marking invalid. ** Changed in: linux (Ubuntu) Status: Confirmed => Invalid ** Changed in: linux (Ubuntu Wily) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1463584] Re: [Hyper-V] Add support for VMBus panic notifier handler

From tpp-hyperv buglist, Microsoft states: We've also verified on Hyper-V both Trusty and Utopic and the behavior is as expected. Can be removed from the tpp list -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1434247] Re: [FFE] Upstream patches to Libvirt for vivid

#2 , that is correct, I opened the bug in the wrong category. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1434247 Title: [FFE] Upstream patches to Libvirt for vivid To manage notifications about

[Bug 1434247] Re: [FFE] Upstream patches to Libvirt for vivid

** Description changed: + Libvirt now has native support for pluging vNICs into the midonet + overlay. - Libvirt now has native support for pluging vNICs into the midonet overlay. + The change in libvirt would make Ubuntu Openstack with MidoNet use a + supported interface mode of libvirt

[Bug 1434247] [NEW] Upstream patches to Libvirt for vivid

Public bug reported: Libvirt now has native support for pluging vNICs into the midonet overlay. Proposing that these upstream patches go into Vivid release. Patches to ibvirt: http://libvirt.org/git/?p=libvirt.git;a=commit;h=e1f64856941630c0e4944c43384aa3ddbe9db810

[Bug 1434257] [NEW] MAAS should set dnssec-validation to no in /etc/bind/named.conf.options

Public bug reported: Several enterprise customers have had problems bootstrapping juju, getting errors like: Download failed. wait 15s\nAttempt 5 to download tools from https://streams.canonic al.com/juju/tools/releases/juju-1.21.3-trusty- amd64.tgz...\ncurl: (6) Could not resolve host:

[Bug 1434257] [NEW] MAAS should set dnssec-validation to no in /etc/bind/named.conf.options

Public bug reported: Several enterprise customers have had problems bootstrapping juju, getting errors like: Download failed. wait 15s\nAttempt 5 to download tools from https://streams.canonic al.com/juju/tools/releases/juju-1.21.3-trusty- amd64.tgz...\ncurl: (6) Could not resolve host:

[Bug 1177148] Re: DVD medium locked and not released by Ubuntu on Windows server 2012 and OS133/134

** Changed in: ubuntu Status: Confirmed = Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1177148 Title: DVD medium locked and not released by Ubuntu on Windows server 2012 and

[Bug 1413020] Re: [Hyper-V] IP injection adds the line “# The following stanza(s) added by hv_set_ifconfig” for every pass.

Verified in Dell RR5 HyperV cluster lab using trusty-proposed and utopic-proposed. ** Tags removed: verification-needed-trusty verification-needed-utopic ** Tags added: verification-done-trusty verification-done-utopic -- You received this bug notification because you are a member of Ubuntu

[Bug 1423343] Re: [Hyper-V][ubuntu 15.04] various upstream patches for hyper-v

These are requested patches from the Microsoft Hyper-v team, I don't think apport will do much. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1423343 Title: [Hyper-V][ubuntu 15.04] various upstream

[Bug 1423343] Re: [Hyper-V][ubuntu 15.04] various upstream patches for hyper-v

** Changed in: linux (Ubuntu) Status: Incomplete = Opinion ** Changed in: linux (Ubuntu) Status: Opinion = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1423343 Title:

[Bug 1423343] [NEW] [Hyper-V][ubuntu 15.04] various upstream patches for hyper-v

Public bug reported: Following patches are missing from ubuntu vivid 15.04 compared to latest upstream (linux-next) , please include them in ubuntu vivid , all the patches listed here are already upstream . /arch/x86/include/uapi/asm/hyperv.h 1.

[Bug 1404509] Re: [precise, trusty] udev does not automatically load modules with kernel = 3.11

Tested and verified on PowerEdge R620 with trusty-proposed. After updating and dist-upgrade, /dev/ipmi0 shows up as a device. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404509 Title:

[Bug 1331214] Re: MAAS (amttool) cannot control AMT version 8

Verified on several VPro machines in the Dell lab, with different AMT firmware levels. ## PowerEdge T20 FW 9.0.21-build 1462works ## Laptop: E6400 FW 4.2.60-build 1060works ## Laptop: E6520 FW 7.1.4-build 1068works ## Laptop: E6430

[Bug 1331214] Re: MAAS (amttool) cannot control AMT version 8

Verified on several VPro machines in the Dell lab, with different AMT firmware levels. ## PowerEdge T20 FW 9.0.21-build 1462works ## Laptop: E6400 FW 4.2.60-build 1060works ## Laptop: E6520 FW 7.1.4-build 1068works ## Laptop: E6430

[Bug 1363719] Re: efibootmgr may create a duplicated boot entry, breaking UEFI boot.

** Also affects: grub2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1363719 Title: efibootmgr may create a duplicated boot entry, breaking UEFI

[Bug 1413020] Re: [Hyper-V] IP injection adds the line “# The following stanza(s) added by hv_set_ifconfig” for every pass.

Mike Schroeder and I verified that the script attached by Andy in #2 fixes the problem. Thanks Andy. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1413020 Title: [Hyper-V] IP injection adds the

[Bug 1359980] Re: [Hyper-V] Unable to perform a full kernel crash on Ubuntu 14.10

Fix for this needs to be decided by the kexec-tools team, moving over there. ** Package changed: linux (Ubuntu) = kexec-tools (Ubuntu) ** Changed in: kexec-tools (Ubuntu) Assignee: Andy Whitcroft (apw) = (unassigned) ** Changed in: kexec-tools (Ubuntu Utopic) Assignee: Andy Whitcroft

[Bug 1413020] [NEW] [Hyper-V] IP injection adds the line “# The following stanza(s) added by hv_set_ifconfig” for every pass.

Public bug reported: This is new bug branched off Bug https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1360580 The IP injection problem has been fixed, but a small problem remains: There is one small glitch in how hv_set_ifconfig runs, as after several runs it keeps adding the line “# The

[Bug 1360580] Re: [Hyper-V] IP injection does not occur on Ubuntu 14.10

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1413020 has been opened to deal with the stanza problem. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1360580 Title: [Hyper-V] IP injection

[Bug 1360580] Re: [Hyper-V] IP injection does not occur on Ubuntu 14.10

IP Injecting testing was successful using the released Ubuntu 14.10 x64 .iso. The remaining issue is the stanza issue pointed out in Abhishek’s response #13. I will open a new bug to deal with this. ** Changed in: linux (Ubuntu) Status: In Progress = Fix Released ** Changed in:

[Bug 1301019] Re: hyper-v: ifdown command not working due to bad ifstate

Bug is stale, marked invalid at Microsoft's request ** Changed in: linux (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1301019 Title: hyper-v: ifdown

[Bug 1311070] Re: hyper-v:IP Injection on Ubuntu 13.10 guest during Failover and Test Failover is corrupting the existing entries

Stale bug, closed out at Microsoft's request. ** Changed in: linux (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1311070 Title: hyper-v:IP Injection on

[Bug 1379926] Re: gedit crashed with signal 5 in _XReply()

The fix in #1376494 seems to work for me: sudo apt-get install ibus-gtk log out/in -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1379926 Title: gedit crashed with signal 5 in _XReply() To manage

[Bug 1285977] Re: Ubuntu 14.04 daily build crash after install

Doesn't apply anymore, marking invalid ** Changed in: compiz (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1285977 Title: Ubuntu 14.04 daily build crash

[Bug 1271144] Re: br0 not brought up by cloud-init script with MAAS provider

I'm seeing the same error on my hardware MAAS cluster with the latest maas stable and juju stable . Failing bridge on the bootstrap node is called juju-br0. I will post more info on Monday. -- You received this bug notification because you are a member of Ubuntu Server Team, which is

[Bug 1271144] Re: br0 not brought up by cloud-init script with MAAS provider

I'm seeing the same error on my hardware MAAS cluster with the latest maas stable and juju stable . Failing bridge on the bootstrap node is called juju-br0. I will post more info on Monday. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to

[Bug 1321885] Re: IPMI detection and automatic setting fail in ubuntu 14.04 maas

Verified that the fix works on Dell PowerEdge R805 . maas 1.7.0+bzr3299-0ubuntu1~trusty -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openipmi in Ubuntu. https://bugs.launchpad.net/bugs/1321885 Title: IPMI detection and automatic

[Bug 1321885] Re: IPMI detection and automatic setting fail in ubuntu 14.04 maas

Verified that the fix works on Dell PowerEdge R805 . maas 1.7.0+bzr3299-0ubuntu1~trusty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1321885 Title: IPMI detection and automatic setting fail in

[Bug 1216059] Re: Firefox difficulties with https and IPv6 addresses

** Changed in: dell-poweredge Assignee: Kent Baxley (kentb) = Mark W Wenning (mwenning) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1216059 Title: Firefox difficulties with https and IPv6

[Bug 1370368] Re: Failed to install Ubuntu 14.04.1 LTS on Dell C6220

I tried it here on a C6220 in the Dell lab and found the same thing. The tar'ed var/log dir is attached. Notes: ## BIOS boot, not UEFI ## ubuntu-14.04.1-server-amd64.iso - usb disk ## Add a second disk to array, hit ctl-I on way up and set up RAID1 array ## - exit, status of RAID1

[Bug 1349920] Re: ledmon does not work in Ubuntu 14.04

** Changed in: dell-poweredge Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1349920 Title: ledmon does not work in Ubuntu 14.04 To manage notifications

[Bug 1301019] Re: hyper-v: ifdown command not working due to bad ifstate

Abishek, can you give more information on how to duplicate this problem? What I did was: Installed ubuntu-14.04.1-server-amd64.iso as a VM under Hyper-V (Windows Server 2008R2SP1) Installed linux-cloud-tools-3.13.0-32-generic hv_set_ifconfig seems to work OK. /run/network/ifstate seems to

[Bug 1349920] Re: ledmon does not work in Ubuntu 14.04

Verified on Dell Poweredge R820 . ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1349920 Title: ledmon does not work in Ubuntu