I have managed to get around this problem. It appears to be due to the
presence/non-presence of some directories and files.
I made sure the following were present:
/var/run/dovecot/login
/var/run/dovecot/login
/etc/dovecot/dovecot.conf
I was then able to reinstall dovecot-common
There is a bug
I don't have 8.10 alpha. But this appears fixed in 8.04 except for the
fact that the MIC level in Audacity will not change the record level.
--
Unable to adjust sound levels when recording in feisty
https://bugs.launchpad.net/bugs/118725
You received this bug notification because you are a
I forgot to mention that I am not using a multi-boot system.
Also when using 2.6.20-16 I get the same problem - but interminably.
--
fsck Unable to resolve UUID
https://bugs.launchpad.net/bugs/106209
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
I also forgot to mention that I am using RAID 1
--
fsck Unable to resolve UUID
https://bugs.launchpad.net/bugs/106209
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I am having this trouble in Gutsy when I use kernel 2.6.22-14. I get the
message from fsck that it is unable to resolve a uuid, but the uuid exists.
I have reverted to 2.6.20-16, which does boot - although there are some
problems with booting at times with that kernel a swell.
--
fsck Unable
Public bug reported:
I have an M-Audio M2496 card which uses the ICE1712 chip.
I recently upgraded (using software update) to Audacity 1.3.4-beta. I run
Ubuntu Gutsy.
I now find that I am unable to change the volume of recording or playback using
the sliders in the Audacity toolbar. This worked
** Attachment added: asound.conf
http://launchpadlibrarian.net/12150809/asound.conf
--
Unable to change volumes using sliders
https://bugs.launchpad.net/bugs/194230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Yes
[EMAIL PROTECTED]:~$ cat /etc/hosts
127.0.0.1 localhost
10.0.0.10 neon.atom neon
10.0.0.6 carbon.atom carbon
10.0.0.30 zinc.atom zinc
10.0.0.85 astatine.atom astatine
10.0.0.78 platinum.atom platinum
10.0.0.90 thorium.atom thorium.atom
# The following lines are desirable for IPv6 capable
** Attachment added: This image shows high record levels and the zero mixer
settings
http://launchpadlibrarian.net/7962874/sound.jpg
--
Unable to adjust sound levels when recording in feisty
https://bugs.launchpad.net/bugs/118725
You received this bug notification because you are a member
Public bug reported:
Binary package hint: alsa-base
No matter what program I use to record sound with. I can not adjust my
sound levels. I have tried Audacity, Track_rec and Gnome Sound Recorder.
I have tried to adjust the recording levels by using Envy24 Control
mixer, alsamixer, alsamixergui.
Public bug reported:
At boot I sometimes get the following message
Log of fsck -C -R -A -a
Thu Jun 14 10:17:08 2007
fsck 1.40-WIP (14-Nov-2006)
fsck.ext3: No such file or directory while trying to open /dev/Volume0/lvol0
/dev/Volume0/lvol0:
The superblock could not be read or does not
Sorry, but I am not sure that I can help out now. The PC that was used
when this problem arose has been utilised for another project now.
--
Network is unreachable in Feisty
https://bugs.launchpad.net/bugs/95257
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Well here we go again! This morning when I powered up my PC i had the following
problems
1 - USB (I-pod) device would not automount.
so I rebooted with a shutdown -r now
2. had 3 trys at this because of all the problems noted in previous entries
3. Then I had no menus from the gnome toolbar and
Today it was my USB (I-pod) device would not automount.
Here is information that has been provided before
uname -a
Linux thorium 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686
GNU/Linux
** Attachment added: dmesg.log
http://launchpadlibrarian.net/9654117/dmesg.log
--
lspci -vvnn lspci-vvnn.log
** Attachment added: lspci-vvnn.log
http://launchpadlibrarian.net/9654118/lspci-vvnn.log
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
changed to new because new information added
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Incomplete = New
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
I thought that I had made it clear in my original post that I had used
the envy24 controil tool, and I quote
I have tried to adjust the recording levels by using Envy24 Control
mixer, alsamixer, alsamixergui. gnome alsa mixer. I have also tried to
use the controls in Audacity, but that doesn't
I thought that I had made it clear in my original post that I had used
the envy24 controil tool, and I quote
I have tried to adjust the recording levels by using Envy24 Control
mixer, alsamixer, alsamixergui. gnome alsa mixer. I have also tried to
use the controls in Audacity, but that doesn't
Here is my FSTAB. My question is what does it mean and how do I change
it to get it work with the new kernel? It seems to me that I am using
dev/sdxx ids!
# /etc/fstab: static file system information.
#
# file system mount point type options dump pass
proc/proc
Here is the commands outout as requested.
[EMAIL PROTECTED]:~$ blkid
/dev/sda1: LABEL=System UUID=69eb4fab-f38b-43f7-8796-39734a877b89
SEC_TYPE=ext2 TYPE=ext3
/dev/sda2: TYPE=swap UUID=b800200b-197f-40e2-b27e-684b783e1bea
/dev/sdb1: LABEL=Development UUID=e4ee9322-cbbf-4252-ad3e-ba14032571a4
Hello, I'm Bananabob's Son.
Here are a few more pieces of information.
The raid is set up using partions 3 of both drives.
Swap is on partions 2 of both drives to load balance.
Root is on partion 1 of the first drive. Partition 1 of the second drive is for
a developmental root if the need
A new problem in this saga
Two days in a row I have had the following messages on bootup.
BusyBox V1.1.3 (Debian 1:1.1.3-3ubuntu3) Built-in Shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
Of course on reboot - I have to
Is https://bugs.launchpad.net/ubuntu/+bug/120285 a duplicate of this
problem?
--
Feisty boot fail can't access tty IDE SATA problem
https://bugs.launchpad.net/bugs/106864
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Well the problem has not been fixed. Here is the current indication:
Log of fsck -C -R -A -a
Fri Jul 6 08:50:24 2007
fsck 1.40-WIP (14-Nov-2006)
fsck.ext3: Unable to resolve 'UUID=e1298250-91d0-4524-8fea-abeffc04d4ec'
fsck died with exit status 8
Fri Jul 6 08:50:24 2007
As
Public bug reported:
Here is my /etc/hosts:
127.0.0.1 localhost
10.0.0.10 neon.atom neon
10.0.0.6 carbon.atom carbon
10.0.0.30 zinc.atom zinc
10.0.0.85 astatine.atom astatine
10.0.0.78 platinum.atom platinum
10.0.0.90 thorium.atom thorium
# The following lines are desirable for IPv6 capable
SystemAdministrationNetwork
Wired ConnectionHostsAdd
--
[network-admin] appends network name to machine name
https://bugs.launchpad.net/bugs/122948
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
A few days ago my son ran the following command:
sudo update-initramfs -u
Since then I have had no boot-up problems. This does not mean that the
problem is fixed, because I can go for days without having any problems,
and then get several in a row. So I would like to wait a while before I
claim
And the next attachment here
** Attachment added: lspci -vvnn lspci-vvnn.log
http://launchpadlibrarian.net/8270229/lspci-vvnn.log
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
Just had this problem this weekend
--
package dovecot-common 1:1.0.10-1ubuntu5.1 failed to install/upgrade:
subprocess post-installation script returned error exit status 1
https://bugs.launchpad.net/bugs/239752
You received this bug notification because you are a member of Ubuntu
Bugs, which
I have managed to get around this problem. It appears to be due to the
presence/non-presence of some directories and files.
I made sure the following were present:
/var/run/dovecot/login
/var/run/dovecot/login
/etc/dovecot/dovecot.conf
I was then able to reinstall dovecot-common
There is a bug
I have mouse problems with FF 3.0.5 in Hardy. I can not yet report what is
causing them, but I can tell you that my problems are mainly with the middle
button of a 3 button mouse, random events occur, not the action that I expect,
which is open a page in a new tab. However if I use both the
Can't check in anything but LTS 8.04 sorry
--
Unable to change volumes using sliders
https://bugs.launchpad.net/bugs/194230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I have been asked by email to comment on this bug. I now have Firefox
3.0.11 and it appears to be fixed for me. Thank you
--
[MASTER] right click (with button release) might activate random popup-menu-item
https://bugs.launchpad.net/bugs/187313
You received this bug notification because you are
I am sorry but right now I am unable to help you debug this due to other
commitments, and I am changing over to 64-Bit Hardy.
--
Superblock not read at boot
https://bugs.launchpad.net/bugs/120285
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I am having this problem with a Brother HL-1430 connected via USB, and
using CUPS on Edgy.
Is there a fix for this and if so where is it?
--
Cups prints only first job on USB printer
https://launchpad.net/bugs/69265
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I just want to add a me too
I have HL-1430 and Edgy.
The printer will print once and then I have to unplug the USB cable and
replug it to get the printer to print remaining jobs.
I note that some people report that this is fixed, but no one tells us
how to fix it.
--
Brother HL-1430 USB
I am running Edgy and the problem still occurs
** Changed in: cupsys (Ubuntu)
Status: Fix Released = Needs Info
--
Brother HL-1430 USB printer will only print once
https://launchpad.net/bugs/57050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This problem still occurs in Edgy
** Changed in: cupsys (Ubuntu)
Status: Fix Released = Needs Info
--
Cups prints only first job on USB printer
https://launchpad.net/bugs/69265
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Installed from scratch onto a newly built PC.
--
Brother HL-1430 USB printer will only print once
https://launchpad.net/bugs/57050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I believe I may have found a solution to this problem.
I Tried to add Brothers own lpr and cups driver as per
http://solutions.brother.com/linux/sol/printer/linux/cups_drivers.html#de
Needed to issue sudo mkdir /var/spool/lpd as the first dpkg aborted with
mkdir: cannot create directory
This could be a duplicate of https://launchpad.net/bugs/57050
--
Cups prints only first job on USB printer
https://launchpad.net/bugs/69265
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
quoteEdit /etc/cups/cupsd.conf so that it has a line FileDevice Yes,
then restart CUPS with sudo /etc/init.d/cupsys restart and create a
queue for your printer using the URI file:/dev/usblp0 and the same PPD
file as for your current print queue. This surrounds the USB backend.
Tell whether you can
I have carried out the instructions you gave above, and I can report
thjat everything now works using the test printer.
What is next?
Do I need to delete the changes made to cupsd.conf and delete the test
printer?
--
Brother HL-1430 USB printer will only print once
I made the changes and it does work.
--
Brother HL-1430 USB printer will only print once
https://launchpad.net/bugs/57050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I too get a whole raft of messages. I have attached the email
** Attachment added: Scrollkeeper email
http://librarian.launchpad.net/5787043/mail.txt
--
monthly scrollkeeper cron job is very noisy
https://launchpad.net/bugs/73609
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Thank you for the quick fix.
There is another bug report at
https://launchpad.net/ubuntu/+source/cupsys/+bug/69265
which describes the same fault.
Can I delete the usb file that I copied to my home directory, or shjould
I hold onto it - just in case?
--
Brother HL-1430 USB printer will only
I had this problem on my PC but I have fixed it.
When I originally installed Ubuntu Edgy everything worked fine. I booted
up and the CPU Frequency Scaled as expected.
Then I started to play with the setting of the Login Window
(SystemAdministrationLogin Window) There I unchecked Show Actions
Public bug reported:
Using latest version of Feisty.
I cannot connect to the network.
Result of a ping gives me the message connect: Network is unreachable
Output from ifconfig:
eth0 Link encap:Ethernet HWaddr 00:80:AD:0C:84:7D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
dmesg as requested:
[0.00] Linux version 2.6.20-12-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 20:55:46 UTC 2007 (Ubuntu
2.6.20-12.20-generic)
[0.00] BIOS-provided physical RAM map:
[0.00] sanitize start
[0.00]
Just to add to JuanMatias post.
I have had the same problem for ages. I recently updated my bios so that it
would recognize the 1TB disk correctly, as per this post
http://comments.gmane.org/gmane.comp.boot-loaders.grub.bugs/8433
The bios now does recognize the 1TB disk correctly but the PC
*** This bug is a duplicate of bug 477430 ***
https://bugs.launchpad.net/bugs/477430
I have had the same problem for ages. I recently updated my bios so that it
would recognize the 1TB disk correctly, as per this post
http://comments.gmane.org/gmane.comp.boot-loaders.grub.bugs/8433
The bios
It would still appear to be a GRUB2 problem as my disk is recognized
correctly
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/477430
Title:
grub 2 error: out of disk. failed to boot default entries.
Just to add a comment that I have just tried this with a completely
fresh updated version of 10.04 and it still will not enable me to log in
at all. I am afraid that this means I am stuck here on 8.04 until I can
get a fix for this problem. I really think this is an extreme high
priority bug. How
Public bug reported:
Binary package hint: sound-juicer
Sound Juicer should build playlists in m3u format for example:
#EXTM3U
#EXTINF:801,01 - Moanin.flac
01 - Moanin.flac
#EXTINF:711,02 - Nicas Dream.flac
02 - Nicas Dream.flac
#EXTINF:502,03 - Little
It should allow by configuration for
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/41196257/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/41196258/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/41196259/ProcStatus.txt
--
Sound
Thanks Dejan Oljaca I have opened a new bug at
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/634639 in the hopes
that someone would look at it at fix it. I would be plased if you added
your support to that bug as well.
--
grub 2 error: out of disk. failed to boot default entries. press
Public bug reported:
Binary package hint: grub2
I installed 10.10 RC and have been getting error: out of disk messages
on a Cold Boot. That is one where you have to switch the PC on. It
will boot, however if you push the restart button.
I have reported this for 10.04.01 LTS as well see bug
I have reported this with 10.10 RC
https://bugs.launchpad.net/bugs/654821
--
10.04.1 LTS Grub gives message error: out of disk
https://bugs.launchpad.net/bugs/634639
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Results from this command:
apport-collect 654821
The authorization page:
(https://edge.launchpad.net/+authorize-token?oauth_token=03ZtwVw5s6f7zNxxkjHXallow_permission=WRITE_PRIVATE)
should be opening in your browser. After you have authorized
this program to access Launchpad on your behalf
I get the folowiong message from Launch[ad when trying to carry out the
change.
'grub-pc' is a binary package. This bug has been assigned to its source
package 'grub2' instead.
So I installed grub2 package
** Tags added: apport-collected
** Description changed:
Binary package hint: grub2
apport information
** Attachment added: Dependencies.txt
https://bugs.edge.launchpad.net/bugs/654821/+attachment/1674278/+files/Dependencies.txt
--
10.10 RC Grub gives message error: out of disk
https://bugs.launchpad.net/bugs/654821
You received this bug notification because you are a
Using the information in this post
http://ubuntuforums.org/showthread.php?t=1195275 I have been able to get more
information about this bug
.
I reinstalled 10.04.1 LTS and tried this
http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:write
This isn't the
Public bug reported:
Binary package hint: grub2
I installed 10.04.1 LTS and have been getting error: out of disk messages on
a Cold Boot. That is one where you have to switch the PC on. It will boot,
however if you push the restart button.
Using the information in this post
I would like to add that I am getting this issue with a freshly burnt
10.4.1
--
grub 2 error: out of disk. failed to boot default entries. press any key to
continue...
https://bugs.launchpad.net/bugs/477430
You received this bug notification because you are a member of Ubuntu
Bugs, which is
More information about this bug.
If I boot from the 10.04.01 LTS Live CD and restart the system
10.04.01 will boot from the hard drive, but it issues a message error:
out of disk. just before it continues the boot sequence.
If I cold boot directly from the hard drive I get as far as the
error:
I have now tried to use Linux Mint Debian Edition to see if this problem
is a Ubuntu of a Grub2 problem. I can report that the problem exists
with LMDE as well. Therefore I assume this is a Grub2 problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have now tried to use Linux Mint Debian Edition to see if this problem
is a Ubuntu of a Grub2 problem. I can report that the problem exists
with LMDE as well. Therefore I assume this is a Grub2 problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have now tried to use Linux Mint Debian Edition to see if this problem
is a Ubuntu of a Grub2 problem. I can report that the problem exists
with LMDE as well. Therefore I assume this is a Grub2 problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Frank - I have tried this, and I thank you for pointing me to this on
the Ubuntu Uk podcast, but it would not work for me. I still can only
boot by hitting the reset button on my pc box at the Grub2 error. -
James
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I am running Linux Mint 17.3 Cinnamon with kernel 4.2.0-18.
I power off using the Menu>Quit>Shut Down sequence. My battery indicator shows
100% at power off
When I reboot in the morning the battery indicator shows 60%.
In trying to ascertain if this was a hardware or software problem I have
"I used this site to disable WOL before shutdown:
http://www.hecticgeek.com/2012/09/disabling-wake-on-lan-in-ubuntu-might-
save-a-tiny-bit-of-power-on-your-laptop/"
@dngrsone that is the site I used to confirm that my WOL is off. Do you
have an integrated video card as well as the Radeon and can
Re my comment above - I should have said Nouveau Drivers - It is an NVIDEA Card.
I am referring to using the PRIME option to switch from Intel to NVIDEA card
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Last night I switched from the NVIDEA drive to the Intel driver for
graphics and then powered off.
This morning my power drop was only 7% - It dropped from 100% to 93%.
So I am assuming it is a problem with the NVIDEA drivers.
Anyone care to comment
--
You received this bug notification
Just adding my name to the list HP Pavillion dv6
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1574125
Title:
[Lenovo G50-70] suspend not working after upgrade
To manage notifications about this
74 matches
Mail list logo
