** Attachment added: bjfilter-pixmaip1500_2.50-3_i386.deb
http://launchpadlibrarian.net/19188394/bjfilter-pixmaip1500_2.50-3_i386.deb
--
Printer Canon PIXMA MP110 doesn't work in Linux
https://bugs.launchpad.net/bugs/292205
You received this bug notification because you are a member of
** Attachment added: bjfilter-common_2.50-3_i386.deb
http://launchpadlibrarian.net/19188381/bjfilter-common_2.50-3_i386.deb
--
Printer Canon PIXMA MP110 doesn't work in Linux
https://bugs.launchpad.net/bugs/292205
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
I tried to install my multifunctional printer on Linux, but there isn't any
compatible driver for it.
So I searched the net and found, that PIXMA MP110 is almost compatible with the
iP1500 driver.
However, neither this driver is listed in the Ubuntu printers driver list.
I
Public bug reported:
When I try to eject my cdrom (as by the eject command in nautilus as
by the device button), it opens the door and immediately after it closes
the door. Sometimes it only opens as I want, but it doesn't happen very
often.
In my logs, there are only messages about mounting the
Public bug reported:
I think, it was Feisty, when I last saw my IDE disk mapped as hda.
Now, it is mapped as sdb, after my first SCSI disk (the only SCSI disk, I
have).
The Ubuntu installer says, it is SCSI3, although I have only two HDDs in my
PC.
However, GRUB recognizes both disks fine
Now, with Intrepid final, I am sure that this happens only with fglrx drivers
installed.
Without them, I could normally switch user.
--
[Intrepid] Computer freeze when switching user
https://bugs.launchpad.net/bugs/290704
You received this bug notification because you are a member of Ubuntu
Public bug reported:
I have two panels fixed to the bottom edge of my screen.
Sometimes, when I login, the two panels are shuffled (the upper is in bottom
and the bottom is up)
When this happens, positions of both panels are always locked, so I must unlock
the upper panel, and in properties
*** This bug is a duplicate of bug 266911 ***
https://bugs.launchpad.net/bugs/266911
I don't think, this bug is a duplicate of bug #266911.
It does nothing with the fglrx issue and the fix, described in the bug #266911
didn't work for me.
I would also notice, that if I move mouse
Fixed for me in the Intrepid Release Candidate.
Thanks
** Changed in: xkeyboard-config (Ubuntu)
Status: New = Fix Released
--
GNOME doesn't treat well some characters with Czechia keyboard layout in
Intrepid Alpha 6
https://bugs.launchpad.net/bugs/272193
You received this bug
** Attachment added: Speed Link Black Widow Flightstick SL-6640
http://launchpadlibrarian.net/18887814/Speed_Link_Black_Widow_Flightstick_SL-6640.lshal
--
[Intrepid] lshal output for different joystick, joypad and dance mat devices
https://bugs.launchpad.net/bugs/283399
You received this
** Attachment added: Speed Link Black Widow Flightstick SL-6640 diff
http://launchpadlibrarian.net/18887825/Speed_Link_Black_Widow_Flightstick_SL-6640.lshal.diff
--
[Intrepid] lshal output for different joystick, joypad and dance mat devices
https://bugs.launchpad.net/bugs/283399
You
Public bug reported:
When I try to switch user by the panel applet or new login in system
tools or to use guest session, my screen gets dark and computer freezes.
It happens also in Hardy for me. I found only this line in syslog:
Oct 29 13:47:55 DESKTOP-Linux acpid: client connected from
I am having this issue with compis enabled as well as with compiz
disabled.
In my kern.log, there's absolutely nothing about the freeze.
I have ATI Radeon HD2400 PRO AGP, with fglrx (8.54.3) drivers installed.
--
[Intrepid] Computer freeze when switching user
I have the same problem.
In my computer, there is one IDE disk and one SATA disk.
On Feisty, they were identified as hda (hd0 in GRUB - IDE) and sda (hd1 in GRUB
- SATA).
But Hardy identifies them as sdb (hd0 in GRUB - IDE) and sda (hd1 in GRUB -
SATA).
Also for me the GRUB identifies them
Public bug reported:
I have AGP version of ATI HD 2400PRO. My GDM randomly crashes and then I
get back to the text mode. Last time in the text mode I saw an error
report in my /var/log/gdm/:0.log file, so I attached it and I hope it
will help.
edit: I had ATI Radeon 9550 a few weeks ago and I
** Attachment added: /var/log/gdm/:0.log
http://launchpadlibrarian.net/15332828/%3A0.log
** Description changed:
I have AGP version of ATI HD 2400PRO. My GDM randomly crashes and then I
get back to the text mode. Last in the text mode I saw an error error
report in my
The same happens to me and Gutsy was stable for me too. I read a few
similar threads and I think, it's really a bug in the 2.6.24 Linux
kernel. I also saw an error report on my server variant of Hardy. It was
printed on the screen, but it was too long and as in the desktop
variand, it wasn't
Public bug reported:
Binary package hint: gdm
I use Hardy with GNOME and when I try to switch user, my computer freezes.
The monitor gets dark and ScrollLock and CapsLock LEDs on my keyboard blink.
I found those lines as the last before my computer froze, in my
/var/log/kern.log:
Jul 12
** Description changed:
Binary package hint: gdm
I use Hardy with GNOME and when I try to switch user, my computer freezes.
The monitor gets dark and ScrollLock and CapsLock LEDs on my keyboard blink.
I found those lines as the last before my computer froze, in my
Leo: I think so too. But, maybe other users don't have this issue?
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre...@irc.freenode.org, ICQ: 202077459
514D 3C69 8498 E400 0ACE 90F2 00E3 CACA A5BA ECC7
--
Jaunty: Display doesnt work for ATI Mobility Radeon HD 3470
https
Patrick: You could try the newest fglrx driver from the AMD's sites.
It's fglrx 9.4.
However, this driver as well doesn't work for me in jaunty, it causes
hard hang after a screen corruption when leaving splash screen and
launching GDM.
--
Jaunty: Display doesnt work for ATI Mobility Radeon HD
Janaka: Ah, yes. Sorry for my mistake.
But you are wrong.
Fglrx 8.593 comes from the Catalyst 9.3, the actual Catalyst 9.4 comes
with fglrx 9.602, which is newer than the one in jaunty repository.
It was released just yesterday.
--
Jaunty: Display doesnt work for ATI Mobility Radeon HD 3470
Yes, I talked about the 8.602 version.
It doesn't work for me in jaunty, as well as the version from its
repository (8.600). As I said, I always get screen corruption with those
drivers when starting up and then it freezes. So that's why I can't
accurately tell you what has changed.
If you're
the
fglrx 8.600 driver, which is actually included in jaunty repository as I
know, installs automatically or not.
And a last thing.
If you read the Release Notes for Catalyst 9.4 (fglrx 8.602), they say,
Jaunty IS newly supported by the driver (with notice early look in
brackets).
--
Lukáš Chmela
RC, x86_64
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre...@irc.freenode.org, ICQ: 202077459
514D 3C69 8498 E400 0ACE 90F2 00E3 CACA A5BA ECC7
--
Jaunty: Display doesnt work for ATI Mobility Radeon HD 3470
https://bugs.launchpad.net/bugs/355495
You received this bug notification because
I'm afraid this solution doesn't work a long ago.
I tried to download packages from the japan page many times, but I think
links on that page were broken or something similar. Also solutions with
the APT line didn't work for me. I tried adding the APT line again now,
but it again didn't work.
--
Public bug reported:
I added some Czech translations for BitComet in Rosetta, and I saw a few
translations in the Slovak language. I think, they are translated
horribly, such as enable - zatvoriť, when exiting - keď
existuje, or WARNING - prosím vedzte. I think, somebody should
correct those
Public bug reported:
After a new Intrepid installation, containing the new Pidgin, the Pidgin
sometimes randomly crashes - usually after a long time.
I started it manually from terminal, using the `pidgin` command and after whole
day, when Pidgin crashed again, I got this output in terminal:
James, thanks for your reply.
However, everything, I usually run under my user is nautilus, firefox
(with about 35 tabs), totem with some music and pidgin of course,
without any torrent downloader etc. I also use compiz.
I'll try what you said and I will post results here, but, if it's so,
Public bug reported:
If I try to mount an ISO image using Nautilus menu-Open with-Archive Mounter,
the CD Image appears in the left panel listing available devices and has icon
of unmounted drive.
If I click on the new device nautilus crashes.
I don't know where to find debugging info from
abatcher: Yes, it is probably related to this bug, if you use the fglrx
driver. On my machine, the issue is reproducable as well.
--
[fglrx][Intrepid] Computer freeze when switching user
https://bugs.launchpad.net/bugs/290704
You received this bug notification because you are a member of Ubuntu
Thanks bass, setting it to ALSA really solved the problem.
However, I have more problems with sound in Intrepid.
In DOOM3 and Hydrogen, I had to manually set to OSS sound driver, becouse the
automatic choice (ALSA) had rattly sound in both applications.
This never happened in Hardy or any even
I can confirm, that, as Rockwalrus said, I have exactly 1024 opened file
descriptors in the /proc/.../fd/ folder, by pidgin process ~2 minutes
before it crashes and from the same time it stops playing sounds (for
incomming/outcomming messages etc.) and after clicking on the pidgin
icon in
Confirmed on Karmic 64bit, kernel 2.6.31-16-generic, using fglrx
8.660ubuntu4, gnome-power-manager 2.28.1-0ubuntu1, xorg 1:7.4+3ubuntu10
--
[i945gm] gnome-power-manager and blanking (removal of bodges)
https://bugs.launchpad.net/bugs/421347
You received this bug notification because you are a
No, I can confirm that the bug is now solved for me. Thanks
--
Pidgin randomly crashes
https://bugs.launchpad.net/bugs/298820
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
HW but will know, that
if I use the tested one, I will have NO problem. And I will buy it.
SORRY FO BEING SO LONG BUT WITHOUT DOING THIS, UBUNTU WILL NEVER BE FOR
NORMAL USERS AND hw MANUFACTURER WILL NOT TAKE IT SERIOUSLY.
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre
for better results.
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre...@irc.freenode.org, ICQ: 202077459
514D 3C69 8498 E400 0ACE 90F2 00E3 CACA A5BA ECC7
--
[fglrx]Computer freeze when switching user
https://bugs.launchpad.net/bugs/290704
You received this bug notification because you
), although it works
fine in windows.
I have VIA VT8237 chipset.
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre...@irc.freenode.org, ICQ: 202077459
514D 3C69 8498 E400 0ACE 90F2 00E3 CACA A5BA ECC7
--
ehci_hcd module causes I/O errors in USB 2.0 devices
https://bugs.launchpad.net/bugs
with no change regarding to this bug.
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre...@irc.freenode.org, ICQ: 202077459
514D 3C69 8498 E400 0ACE 90F2 00E3 CACA A5BA ECC7
--
[fglrx]Computer freeze when switching user
https://bugs.launchpad.net/bugs/290704
You received this bug notification
I'm sorry, but as I said I am unable to reproduce this error using
gphoto2. Uploading files through gphoto2 tool works fine with both
devices (EOS 500D and SE C902).
For me, this is only reproducable using nautilus.
I don't know what exactly do you men by gvfs. Could you explain me what
should I
Well, I downloaded gphotofs from karmic repository (including
libgphoto2-2 and libgphoto2-port0) and now I can write normally ono my
SE C902 in nautilus.
Sorry for the confusion, I am actually NOT able to write on Canon EOS
500D even through the gphoto2 command line tool. It always throws PTP
** Also affects: hundredpapercuts
Importance: Undecided
Status: New
--
panels change their position between logins
https://bugs.launchpad.net/bugs/15442
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing
** Description changed:
When trying to copy a file onto my A-DATA 16GB SDHC cl.6 card through
plugged Canon EOS 500D (gphoto2 protocol in Nautilus) I always get the
following
error:
Chyba při zápisu souboru: -108: Neexistuje žádný takový soubor nebo
adresář
(Means something
** Description changed:
When trying to copy a file onto my A-DATA 16GB SDHC cl.6 card through
plugged Canon EOS 500D (gphoto2 protocol in Nautilus) I always get the
following
error:
Chyba při zápisu souboru: -108: Neexistuje žádný takový soubor nebo
adresář
(Means something
** Also affects: hundredpapercuts
Importance: Undecided
Status: New
--
[fglrx]Computer freeze when switching user
https://bugs.launchpad.net/bugs/290704
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
on, it knows which window is opened on which desktop, so it
should also know which windows should be displayed on every panel. If
it's not gnome-panel's concern, then compiz has to do something with
this. But why should be this set to invalid?!
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre
I am not able to upload images to my EOS 500D even through the command
line gphoto2 tool from jaunty repository. I always get error -2 PTP
Parameter Not Supported.
However, that's another error and it is not related to the problem which
I describe in the description. Also, that's why I updated
*** This bug is a duplicate of bug 358899 ***
https://bugs.launchpad.net/bugs/358899
** This bug has been marked a duplicate of bug 358899
The windows resizes so slowly(max, min, resize)
--
fglrx (8.600) crashes on X1600 mobility
https://bugs.launchpad.net/bugs/354308
You received this
*** This bug is a duplicate of bug 355495 ***
https://bugs.launchpad.net/bugs/355495
** This bug is no longer a duplicate of bug 358899
The windows resizes so slowly(max, min, resize)
** This bug has been marked a duplicate of bug 355495
Janty: Display doesnt work for ATI Mobility
This happens also in the first Intrepid beta. I also tried to change the
password as you said and then it worked well. So I think, it really
happens becouse of the EURO character in password.
--
GNOME doesn't treat well some characters with Czechia keyboard layout in
Intrepid Alpha 6
manually in nautilus, I get the following
error message:
Chyba: Chyba při prohledávání souboru /media/hda6/Documents and Settings/Lukáš
Chmela s fstat(): Invalid or incomplete multibyte or wide character
Vyberte prosím jiný prohlížeč a zkuste to znovu.
The folder I could not access is the Lukáš
** Changed in: ubuntu
Status: New = Invalid
--
Problems with czech encoding in names of folders on NTFS filesystems using
Intrepid beta 1
https://bugs.launchpad.net/bugs/278024
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Public bug reported:
Although I could log in, I cannot do any administrative work, becouse my
password consists of some special characters (including the €) and the
Intrepid Alpha 6 won't let me do administrative work. I also can't use
the sudo command in the terminal. It says Sorry, try again,
Becouse I don't want to change my password, I just want somebody to fix
this dumb bug.
--
GNOME doesn't treat well some characters with Czechia keyboard layout in
Intrepid Alpha 6
https://bugs.launchpad.net/bugs/272193
You received this bug notification because you are a member of Ubuntu
Bugs,
** Tags added: intrepid jaunty
--
[fglrx]Computer freeze when switching user
https://bugs.launchpad.net/bugs/290704
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
--
Forest Bond
http://www.alittletooquiet.net
http://www.pytagsfs.org
Well, I spoke to Jirka and he said it was just a mistake when he was
finding solution to his problem.
I'll revert the change back.
--
Lukáš Chmela lukaschm...@gmail.com
IRC: kyselejsyre...@irc.freenode.org, ICQ: 202077459
Public bug reported:
When trying to copy a file onto my A-DATA 16GB SDHC cl.6 card through
plugged Canon EOS 500D (gphoto2 protocol in Nautilus) I always get the following
error:
Chyba při zápisu souboru: -108: Neexistuje žádný takový soubor nebo
adresář
(Means something like Error while
I can confirm this issue on Ubuntu 11.10 (upgraded from 10.04). I am not
able to close gnome-system-monitor the usual way by clicking on the red
cross in the top left corner, I have to kill it from the processes list.
** Tags added: amd64 oneiric
--
You received this bug notification because
I can confirm that the internal microphone doesn't work.
I have Acer Aspire 8943G as well.
I have also tried the package linux-alsa-driver-modules-2.6.38-8-generic
version 2.6.38-8.201105230750 from Ubuntu Audio Dev PPA and a bunch of
model options for snd-hda-intel in
Public bug reported:
Using Ubuntu Natty (2.6.38-8-generic) I am not able to get the center
speaker and subwoofer to work - the integrated 5.1 surround is
recognized as 4.0 (front lr + rear lr) at most.
I have tried the latest linux-alsa-driver-modules-2.6.38-8-generic
package version
Wow, you're right - the Ubuntu sound recorder really DOES work with the
microphone.
However, it seems to be the only program that is able to record sound using the
internal microphone.
I have previously tried to install only the pavucontrol package, as it
is not dependent on the others, but the
This bug has already been reported in the ALSA bugtracker a year before.
The URL is:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5083
** Bug watch added: ALSA Bug Tracker #5083
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5083
--
You received this bug notification
I can confirm it on Ubuntu 11.04 too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/367037
Title:
Error while burning - some files may be corrupted on the disc
To manage notifications about this
Yes, I can confirm this bug with the latest developement release version
3.0.0-12.19.
Nothing has changed, the configuration is still shown as 4.0 at most.
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of
Using the latest oneiric developement kernel version 3.0.0-12.19, the
card reader doesn't work either.
There is only a dump rolling in syslog:
Sep 27 16:25:02 Oneiric-beta1-Aspire-8943G kernel: [ 80.456563] mmc0: ADMA
error
Sep 27 16:25:02 Oneiric-beta1-Aspire-8943G kernel: [ 80.456635]
Same problem for me. It happens also to fullscreen applications using
wine1.3. With wine1.2 the problem disappears, but I am not able to
launch some applications.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I agree with you, absolutely. This is an annoying consequence of the
gnome-screensaver removal or whatever has been done.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/871047
Title:
Lock Screen at
By the way, I would like to mention that there is a similar, possibly
related bug report concerning locking the screen when the lid is closed
(without hibernation) - bug #871047
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I am experiencing the same behavior after upgrading to Ubuntu 11.10.
Furthermore, I can see the shadow below the top panel and left panel
disappear and Nautilus segfaults on startup.
** Summary changed:
- Desktop icons become invisable
+ Desktop icons become invisible
--
You received this bug
Persists with kernel version 3.0.0-12.20.
In syslog, there are some messages regarding ALSA and PulseAudio:
Oct 10 15:19:27 Oneiric-beta1-Aspire-8943G pulseaudio[1666]: [alsa-sink]
alsa-util.c: snd_pcm_avail() navrátil hodnotu, která je nezvykle vysoká:
3528320 bajtů (1 ms). -
** Changed in: linux (Ubuntu)
Status: Expired = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/812271
Title:
Acer Aspire 8943G - internal card reader doesn't work
To manage
`sudo update-initramfs -u -k all` has to be run after that in order to
make the changes permanent - otherwise you would need to do modprobe -r
sdhci_pci sdhci modprobe sdhci sdhci_pci after every boot.
** Description changed:
The internal reader in my Acer Aspire 8943G laptop from O2 Micro
Update: xD cards are still not recognized at all with this workaround -
logs don't show any new entry.
** Description changed:
The internal reader in my Acer Aspire 8943G laptop from O2 Micro
manufacturer doesn't work at all with Ubuntu 11.04 and 11.10. It doesn't
mount any memory card nor
There is a workaround from
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/605043/comments/7
Simply add a options sdhci debug_quirks=0x40 line into a new file
(e.g. card-reader.conf) in /etc/modprobe.d
** Tags added: fix workaround
** Description changed:
The internal reader in my Acer
*** This bug is a duplicate of bug 819537 ***
https://bugs.launchpad.net/bugs/819537
** This bug has been marked a duplicate of bug 819537
O2 Micro integrated card reader doesn't work at all on Acer Aspire 8943G
--
You received this bug notification because you are a member of Ubuntu
Thanks, removing the ~/.gstreamer-0.10 directory did solve the issue for
me too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/856988
Title:
totem cannot play quicktime file after upgrade to
Hello! :-) It's great to hear a person with exactly the same laptop and
problems as I have.
It is strange that pavucontrol solved the problem in Ubuntu 10.10 and is
not able to do it again in 11.04. I will probably digg a little bit more
around it to try to get it fixed.
Regarding your
I can confirm that this is still an issue in Ubuntu Maverick
Does anybody care?!
** Changed in: grub2 (Ubuntu)
Status: New = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/428443
Well, I have tried the pavucontrol from Ubuntu 10.10 repository but
there was no difference. The internal microphone is unmuted, volume set
to 100% and audio meters shake a little at the beginning of the meters
and do not react on outer noise.
Hopefully somebody will fix that soon.
--
You
I have searched on the net and found this post on Ubuntuforums:
http://ubuntuforums.org/showpost.php?p=10910372postcount=3
Disabling the second channel of the internal microphone in pavucontrol
really made it working. With turning the volume of the muted channel
more and more close to the other,
Public bug reported:
When I turn the backlight level on my Acer Aspire 8943G laptop up or
down a notch by pressing Fn + left/right arrow key (these function as
backlight changers upwards/downwards), the backlight level of the screen
is adjusted by changing it by SEVERAL steps in just one arrow
*** This bug is a duplicate of bug 839800 ***
https://bugs.launchpad.net/bugs/839800
** This bug has been marked a duplicate of bug 839800
5.1 built-in surround detected as 4.0 on Acer Aspire 8943G with ALC670
--
You received this bug notification because you are a member of Ubuntu
Bugs,
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/839800
Title:
5.1 built-in surround detected as 4.0 on Acer Aspire 8943G with ALC670
To manage notifications about this bug go to:
Public bug reported:
After fresh installation even stereo configuration is set. From the menu
can be selected 4.0 configuration making the rear left and right
speakers work, however, front center and LFE (subwoofer) do not emit any
sound in any application. They can be only tested (and they are
** Bug watch added: ALSA Bug Tracker #5083
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5083
** Also affects: linux via
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5083
Importance: Unknown
Status: Unknown
** Project changed: linux = alsa-driver
--
You
Public bug reported:
Jockey finds correctly that proprietary fglrx driver is available for
installation but when clicking the Enable button, it ends with the
following error message:
SystemError: E:Unable to correct problems, you have held broken
packages.
ProblemType: Bug
DistroRelease: Ubuntu
** Summary changed:
- [oneiric] Error when enabling fglrx: SystemError: E:Unable to correct
problems, you have held broken packages.
+ [oneiric] Error when enabling fglrx: SystemError: E:Unable to correct
problems, you have held broken packages.
--
You received this bug notification because
Public bug reported:
I tried to install the fglrx package manually through apt-get as jockey
failed during enabling it (see bug #819365).
After restart and logging in, the screen went completely black with only
a small rectangle where I could recognize the original desktop
wallpaper. Some
** Attachment added: Screenshot of the Unlogin window using Unity 3D with
fglrx from the repository
https://bugs.launchpad.net/bugs/819389/+attachment/2247382/+files/Screenshot%20at%202011-08-01%2017%3A47%3A02.png
--
You received this bug notification because you are a member of Ubuntu
** Description changed:
I tried to install the fglrx package manually through apt-get as jockey
failed during enabling it (see bug #819365).
After restart and logging in, the screen went completely black with only
a small rectangle where I could recognize the original desktop
No, with Unity 2D, I can only see the screen redrawing gradually with
three colors right after the login (it draws whole screen from top to
bottom in a color that I don't exactly remember, then in green and then
in blue or aqua) and after that the desktop can be seen normally.
I am only
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/819537
Title:
O2 Micro integrated card reader doesn't work at all on Acer Aspire
8943G
To manage notifications about this bug go to:
Public bug reported:
The internal reader in my Acer Aspire 8943G laptop from O2 Micro
manufacturer doesn't work at all. It doesn't mount any memory card nor
recognize that a card has been inserted (system log doesn't show any new
message when I insert or remove a card).
I have tried using A-DATA
Daniel Llewellyn: Yes, it looks like the same issue that I have filled
this bug report against.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/819389
Title:
[fglrx] screen goes black after logging
I has also remarked that those keys don't work either when an
application is running in fullscreen! It is a major usability issue as I
am not able to change the volume then.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I can confirm this bug in Ubuntu 11.04 too.
I have tried the package from Giuseppe Iuculano and I think that the
sound is better when racing (maybe correct), however, it still sounds
very weird in the main menu and even more in the Audio menu.
--
You received this bug notification because you
** Changed in: linux (Ubuntu)
Status: Expired = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/812271
Title:
Acer Aspire 8943G - internal card reader doesn't work
To manage
A similar thing happens to me when I click to write a new email (or to
response) - it opens in fullscreen but with no gaps and neither the top
panel is accessible nor application switcher (Alt+Tab doesn't do
anything) and if I move to another desktop, I can only see the wallpaper
but with no icons
Public bug reported:
Sometimes after some time of using Ubuntu Oneiric, Unity loses focus
completely displaying behind all opened applications as if they were
marked always on top, even above the unity panel, dash, application
switcher etc.
It happens sometimes when I launch a full screen
** Attachment added: Opened dash (using Super - Win key) displays behind the
Firefox window
https://bugs.launchpad.net/bugs/886559/+attachment/2586267/+files/Sn%C3%ADmek%20obrazovky%20%282011-11-05%2014%3A40%3A00%29.png
--
You received this bug notification because you are a member of
1 - 100 of 220 matches
Mail list logo
