Greg, the SSID is Spotty Dogs 5, so no special characters, just a blank
between Spotty and Dogs and Dogs and 5.
It is a 5GHz network.
Two different dongles, both needed to have SSID, password and Country
Code entered.
Would you like me to go back to 3.5 and run it again and I will take
more
Wirrunna wrote:
> Heads up for wireless in-situ updates - there are extra parameters to be
> entered requiring a wired connection before the piCorePlayer will
> connect to the network using the wifi dongle.
Hi Wirrunna,
This shouldn't be the case??? Most of my test pCP's are wifi only.
Can
Heads up for wireless in-situ updates - there are extra parameters to be
entered requiring a wired connection before the piCorePlayer will
connect to the network using the wifi dongle.
Apart from that, two upgrades went amazingly smoothly, it also was
simpler than the 3.50 upgrade as I didn't
paul- wrote:
> We changed the squeezelite page in an attempt to only show the volume
> mixers. I don't have a wolfson card to play with.
>
> After you install the cirrus configuration files. Does the squeezelite
> page work again?
It works but I have changed to Advanced mode to save the
We changed the squeezelite page in an attempt to only show the volume
mixers. I don't have a wolfson card to play with.
After you install the cirrus configuration files. Does the squeezelite
page work again?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
I have the Wolfson Card (old Model) with the Model B, When I enable the
Wolfson Card. The Squeezelite page will cut off at Unmute ALSA
control(partial page). I have to switch to Advanced mode instead of
Beta mode to save my configuration. Other than this, everything is
working.
Did a clean install on a Raspberry Pi 3 Model B+ of Audio version
running a Meridian Explorer 2 DAC plus USB Hard Drive plus WiFi setup
and everything is working fine
Eyerex's Profile:
I would take a look at pCP 3.5.0 or the newly released 4.0.0 beta. That
will do a full AP Mode setup now, and for sure will run LMS with just
the AP running.
The only catch is the original setup on a zero. You really need to
temporarily connect a USB ethernet device for initial configuration.
marflao wrote:
>
> The RCA in at the Kef's would be used with my CD player.
>
CD Playerisn't that only useful for ripping :eek:
>
> @Paul and the rest of the pCP team: I don't want to hijack this thread
> hence pls let me know if further discussion should be done in a separate
>
Thats what I wanted to see ian. Thanks, will fix it for the next
release.
It's obviously a typo on their part.
The IQaudIO DAC boards are: IQaudIODAC
And the DIGI boards are: IQAudIODigi
Way to confuse your customers.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
paul- wrote:
> Ian,
>
> Would you please take a screenshot of your squeezelite page , expand
> the more> by the squeezelite output.
>
> What you are reporting is not what the info on IQAudIOs documentation
> says.
>
> Thanks
I note my neighbour, man in a van has reported something similar,
Great work on this project, I'm having the following issue with standard
PiZeroW. Do you have a link so I can donate?
paul- wrote:
> if you edit the file /opt/bootlocal.sh. Add the following lines AFTER
> the #pCPstop-- line
>
> >
Code:
> >
> ifconfig |
bakker_be wrote:
> I was that guy [emoji14] I was talking "theoretically". It "should"
> work, and with some trial and error you'll probably get the right
> settings, but even if for some reason Pi and speakers would refuse to
> talk to each other a simple "Digi" HAT for the PI with a TOSLINK
paul- wrote:
> You can try to do incremental updates 3.20->3.21->3.22.But it
> would probably be better just download a new image.
I had a similar issue when trying to update from 3.22 to 4.0.0. I can
confirm that, for me, updating from 3.22 to 3.5 and then updating from
3.5 to 4.0.0
marflao wrote:
>
> But he made the offer that I could take the Kef's for a couple of days.
> Maybe I'll try it.
The only way is essex! :cool: :p
Man in a van's Profile:
Man in a van wrote:
> http://www.kef.com/ls50wireless/info_sheet/LS50W_Info_sheet_en_path.pdf
>
> Why not
>
> a) drop an e-mail to KEF and ask them?
>
> b) find a local dealer with a demo pair and take along a pi set up with
> pCP player/LMS, a few files on a usb stick or the sd card and
To the team
Just done an in situ update on rpi3B with Allo Digione.
Smooth as the proverbial :)
With the problem repoted by ian_hays
A friend phoned me about two or three weeks ago saying yhe could not get
Squeezelite to run with his new iQuadio digi.
It tooks us over 30 minutes to figure
marflao wrote:
> Regarding #1:
>
> Regarding #3: fair enough... Maybe some guys will chime in to clarify
> and can confirm (saw one post in this forum where a guy said it would
> work).
http://www.kef.com/ls50wireless/info_sheet/LS50W_Info_sheet_en_path.pdf
Why not
a) drop an e-mail to
paul- wrote:
> .
>
> We are not sure how to handle this.but we do see folks using that
> page. The wifi page isnt as useful anymore.
>
>
>
> Are you using USB? We have always had that problem, we always reload
> the card defaults during the upgrade, and USB has no standard way of
>
marflao wrote:
> 1. Congratulations for the new site. Really like it. Maybe add the link
> to the list of "working USB Dacs" to it since - from my point of view -
> it's very helpful information for others. .
We are not sure how to handle this.but we do see folks using that
page. The wifi
Smooth insitu update here
Pi3 with official 7" LCD and a hifi berry digi+
Was running 3.5 prior
LMS is on NAS
Very much appreciate your efforts, Thanks Team pCP :)
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on
1. Congratulations for the new site. Really like it. Maybe add the link
to the list of "working USB Dacs" to it since - from my point of view -
it's very helpful information for others.
2. Thanks for the 4.0 version. I updated via insitu the standard
version. In my case not all settings were
Tex wrote:
> Smooth Insitu update from 3.5! No problems for the standard audio!
Ditto here, except for error in device name I reported in the 3.5 thread
a few days ago.
Device name should be:
-sysdefault:CARD=IQAudIODigi- (Note the capitalisation of the "A")
not:
-hw:CARD=IQaudIODigi-
23 matches
Mail list logo
